diff --git a/.gitignore b/.gitignore index 81797c5..2fca35b 100644 --- a/.gitignore +++ b/.gitignore @@ -6,3 +6,4 @@ config/vs2015/*.log *.opensdf *.sdf *.suo +config/vs2015/quake3.VC.db diff --git a/config/vs2015/renderer.vcxproj b/config/vs2015/renderer.vcxproj index fbf98ad..ae0ddc3 100644 --- a/config/vs2015/renderer.vcxproj +++ b/config/vs2015/renderer.vcxproj @@ -274,258 +274,6 @@ MaxSpeed %(PreprocessorDefinitions) - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - - - Disabled - %(PreprocessorDefinitions) - EnableFastChecks - MaxSpeed - %(PreprocessorDefinitions) - @@ -539,17 +287,8 @@ - - - - - - - - - - - + + diff --git a/config/vs2015/renderer.vcxproj.filters b/config/vs2015/renderer.vcxproj.filters index a611fb0..f525ce7 100644 --- a/config/vs2015/renderer.vcxproj.filters +++ b/config/vs2015/renderer.vcxproj.filters @@ -12,12 +12,6 @@ {b4c9e0fb-736a-4e87-8ece-6bd80adcca7b} - - {9f29a181-196a-4840-b279-65ab75521f10} - - - {40134765-d5b1-4bd2-9a18-8990036d14af} - @@ -98,114 +92,6 @@ Source Files - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - - - jpeg\Source Files No. 1 - @@ -235,44 +121,17 @@ Header Files - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - - - jpeg\Header Files No. 1 - Header Files Header Files + + jpeg + + + jpeg + \ No newline at end of file diff --git a/source/engine/renderer/tr_image.c b/source/engine/renderer/tr_image.c index bad30b2..abba9a3 100644 --- a/source/engine/renderer/tr_image.c +++ b/source/engine/renderer/tr_image.c @@ -22,17 +22,34 @@ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA // tr_image.c #include "tr_local.h" -/* - * Include file for users of JPEG library. - * You will need to have included system headers that define at least - * the typedefs FILE and size_t before you can include jpeglib.h. - * (stdio.h is sufficient on ANSI-conforming systems.) - * You may also wish to include "jerror.h". - */ +static void* q3_stbi_malloc(size_t size) { + return ri.Malloc((int)size); +} +static void q3_stbi_free(void* p) { + ri.Free(p); +} +static void* q3_stbi_realloc(void* p, size_t old_size, size_t new_size) { + if (p == nullptr) + return q3_stbi_malloc(new_size); -#define JPEG_INTERNALS -#include "../../../third_party/jpeg-6/jpeglib.h" + void* p_new; + if (old_size < new_size) { + p_new = q3_stbi_malloc(new_size); + memcpy(p_new, p, old_size); + q3_stbi_free(p); + } else { + p_new = p; + } + return p_new; +} +#define STBI_MALLOC q3_stbi_malloc +#define STBI_FREE q3_stbi_free +#define STBI_REALLOC_SIZED q3_stbi_realloc +#define STB_IMAGE_IMPLEMENTATION +#include "../../../third_party/stb_image.h" +#define TJE_IMPLEMENTATION +#include "../../../third_party/tiny_jpeg.h" static void LoadBMP( const char *name, byte **pic, int *width, int *height ); static void LoadTGA( const char *name, byte **pic, int *width, int *height ); @@ -1350,448 +1367,76 @@ static void LoadTGA ( const char *name, byte **pic, int *width, int *height) } static void LoadJPG( const char *filename, unsigned char **pic, int *width, int *height ) { - /* This struct contains the JPEG decompression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - */ - struct jpeg_decompress_struct cinfo; - /* We use our private extension JPEG error handler. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct jpeg_error_mgr jerr; - /* More stuff */ - JSAMPARRAY buffer; /* Output row buffer */ - int row_stride; /* physical row width in output buffer */ - unsigned char *out; - byte *fbuffer; - byte *bbuf; - - /* In this example we want to open the input file before doing anything else, - * so that the setjmp() error recovery below can assume the file is open. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to read binary files. - */ - - ri.FS_ReadFile ( ( char * ) filename, (void **)&fbuffer); + byte* fbuffer; + int len = ri.FS_ReadFile ( ( char * ) filename, (void **)&fbuffer); if (!fbuffer) { return; } - - /* Step 1: allocate and initialize JPEG decompression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - - /* Now we can initialize the JPEG decompression object. */ - jpeg_create_decompress(&cinfo); - - /* Step 2: specify data source (eg, a file) */ - - jpeg_stdio_src(&cinfo, fbuffer); - - /* Step 3: read file parameters with jpeg_read_header() */ - - (void) jpeg_read_header(&cinfo, TRUE); - /* We can ignore the return value from jpeg_read_header since - * (a) suspension is not possible with the stdio data source, and - * (b) we passed TRUE to reject a tables-only JPEG file as an error. - * See libjpeg.doc for more info. - */ - - /* Step 4: set parameters for decompression */ - - /* In this example, we don't need to change any of the defaults set by - * jpeg_read_header(), so we do nothing here. - */ - - /* Step 5: Start decompressor */ - - (void) jpeg_start_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* We may need to do some setup of our own at this point before reading - * the data. After jpeg_start_decompress() we have the correct scaled - * output image dimensions available, as well as the output colormap - * if we asked for color quantization. - * In this example, we need to make an output work buffer of the right size. - */ - /* JSAMPLEs per row in output buffer */ - row_stride = cinfo.output_width * cinfo.output_components; - - out = (unsigned char*) ri.Malloc(cinfo.output_width*cinfo.output_height*cinfo.output_components); - - *pic = out; - *width = cinfo.output_width; - *height = cinfo.output_height; - - /* Step 6: while (scan lines remain to be read) */ - /* jpeg_read_scanlines(...); */ - - /* Here we use the library's state variable cinfo.output_scanline as the - * loop counter, so that we don't have to keep track ourselves. - */ - while (cinfo.output_scanline < cinfo.output_height) { - /* jpeg_read_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could ask for - * more than one scanline at a time if that's more convenient. - */ - bbuf = ((out+(row_stride*cinfo.output_scanline))); - buffer = &bbuf; - (void) jpeg_read_scanlines(&cinfo, buffer, 1); + + int components; + *pic = stbi_load_from_memory(fbuffer, len, width, height, &components, STBI_rgb_alpha); + if (*pic == nullptr) { + ri.FS_FreeFile(fbuffer); + return; } // clear all the alphas to 255 { - int i, j; - byte *buf; + int i, j; + byte *buf; - buf = *pic; + buf = *pic; - j = cinfo.output_width * cinfo.output_height * 4; - for ( i = 3 ; i < j ; i+=4 ) { - buf[i] = 255; - } + j = *width * *height * 4; + for (i = 3; i < j; i += 4) { + buf[i] = 255; + } } - - /* Step 7: Finish decompression */ - - (void) jpeg_finish_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* Step 8: Release JPEG decompression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_decompress(&cinfo); - - /* After finish_decompress, we can close the input file. - * Here we postpone it until after no more JPEG errors are possible, - * so as to simplify the setjmp error logic above. (Actually, I don't - * think that jpeg_destroy can do an error exit, but why assume anything...) - */ - ri.FS_FreeFile (fbuffer); - - /* At this point you may want to check to see whether any corrupt-data - * warnings occurred (test whether jerr.pub.num_warnings is nonzero). - */ - - /* And we're done! */ + ri.FS_FreeFile(fbuffer); } +struct Write_Context { + byte* buffer; + int capacity; + int size = 0; -/* Expanded data destination object for stdio output */ + Write_Context(int capacity) { + this->capacity = capacity; + buffer = (byte*)ri.Malloc(capacity); + } + ~Write_Context() { + if (buffer != nullptr) + ri.Free(buffer); + } +}; -typedef struct { - struct jpeg_destination_mgr pub; /* public fields */ - - byte* outfile; /* target stream */ - int size; -} my_destination_mgr; - -typedef my_destination_mgr * my_dest_ptr; - - -/* - * Initialize destination --- called by jpeg_start_compress - * before any data is actually written. - */ - -void init_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - dest->pub.next_output_byte = dest->outfile; - dest->pub.free_in_buffer = dest->size; -} - - -/* - * Empty the output buffer --- called whenever buffer fills up. - * - * In typical applications, this should write the entire output buffer - * (ignoring the current state of next_output_byte & free_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been dumped. - * - * In applications that need to be able to suspend compression due to output - * overrun, a FALSE return indicates that the buffer cannot be emptied now. - * In this situation, the compressor will return to its caller (possibly with - * an indication that it has not accepted all the supplied scanlines). The - * application should resume compression after it has made more room in the - * output buffer. Note that there are substantial restrictions on the use of - * suspension --- see the documentation. - * - * When suspending, the compressor will back up to a convenient restart point - * (typically the start of the current MCU). next_output_byte & free_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point will be regenerated after resumption, so do not - * write it out when emptying the buffer externally. - */ - -boolean empty_output_buffer (j_compress_ptr cinfo) -{ - return TRUE; -} - - -/* - * Compression initialization. - * Before calling this, all parameters and a data destination must be set up. - * - * We require a write_all_tables parameter as a failsafe check when writing - * multiple datastreams from the same compression object. Since prior runs - * will have left all the tables marked sent_table=TRUE, a subsequent run - * would emit an abbreviated stream (no tables) by default. This may be what - * is wanted, but for safety's sake it should not be the default behavior: - * programmers should have to make a deliberate choice to emit abbreviated - * images. Therefore the documentation and examples should encourage people - * to pass write_all_tables=TRUE; then it will take active thought to do the - * wrong thing. - */ - -GLOBAL void -jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (write_all_tables) - jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - jinit_compress_master(cinfo); - /* Set up for the first pass */ - (*cinfo->master->prepare_for_pass) (cinfo); - /* Ready for application to drive first pass through jpeg_write_scanlines - * or jpeg_write_raw_data. - */ - cinfo->next_scanline = 0; - cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); -} - - -/* - * Write some scanlines of data to the JPEG compressor. - * - * The return value will be the number of lines actually written. - * This should be less than the supplied num_lines only in case that - * the data destination module has requested suspension of the compressor, - * or if more than image_height scanlines are passed in. - * - * Note: we warn about excess calls to jpeg_write_scanlines() since - * this likely signals an application programmer error. However, - * excess scanlines passed in the last valid call are *silently* ignored, - * so that the application need not adjust num_lines for end-of-image - * when using a multiple-scanline buffer. - */ - -GLOBAL JDIMENSION -jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION num_lines) -{ - JDIMENSION row_ctr, rows_left; - - if (cinfo->global_state != CSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_scanlines. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_scanlines. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Ignore any extra scanlines at bottom of image. */ - rows_left = cinfo->image_height - cinfo->next_scanline; - if (num_lines > rows_left) - num_lines = rows_left; - - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); - cinfo->next_scanline += row_ctr; - return row_ctr; -} - -/* - * Terminate destination --- called by jpeg_finish_compress - * after all data has been written. Usually needs to flush buffer. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -static int hackSize; - -void term_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - size_t datacount = dest->size - dest->pub.free_in_buffer; - hackSize = (int)datacount; -} - - -/* - * Prepare for output to a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing compression. - */ - -void jpegDest (j_compress_ptr cinfo, byte* outfile, int size) -{ - my_dest_ptr dest; - - /* The destination object is made permanent so that multiple JPEG images - * can be written to the same file without re-executing jpeg_stdio_dest. - * This makes it dangerous to use this manager and a different destination - * manager serially with the same JPEG object, because their private object - * sizes may be different. Caveat programmer. - */ - if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - sizeof(my_destination_mgr)); - } - - dest = (my_dest_ptr) cinfo->dest; - dest->pub.init_destination = init_destination; - dest->pub.empty_output_buffer = empty_output_buffer; - dest->pub.term_destination = term_destination; - dest->outfile = outfile; - dest->size = size; +static void jpeg_write_func(void* context, void* data, int size) { + auto ctx = static_cast(context); + if (ctx->capacity < ctx->size + size) { + int new_capacity = 1.5 * (ctx->size + size); + byte* new_buffer = (byte*)ri.Malloc(new_capacity); + memcpy(new_buffer, ctx->buffer, ctx->size); + ri.Free(ctx->buffer); + ctx->buffer = new_buffer; + ctx->capacity = new_capacity; + } + memcpy(ctx->buffer + ctx->size, data, size); + ctx->size += size; } void SaveJPG(char * filename, int quality, int image_width, int image_height, unsigned char *image_buffer) { - /* This struct contains the JPEG compression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - * It is possible to have several such structures, representing multiple - * compression/decompression processes, in existence at once. We refer - * to any one struct (and its associated working data) as a "JPEG object". - */ - struct jpeg_compress_struct cinfo; - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct jpeg_error_mgr jerr; - /* More stuff */ - JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ - int row_stride; /* physical row width in image buffer */ - unsigned char *out; + // jpeg encoder requires top-bottom rows ordering + auto buffer = (byte*)ri.Hunk_AllocateTempMemory(image_width * image_height * 4); + int row_bytes = image_width * 4; + for (int i = 0; i < image_height; i++) { + memcpy(&buffer[i * row_bytes], &image_buffer[(image_height - 1 - i) * row_bytes], row_bytes); + } - /* Step 1: allocate and initialize JPEG compression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - /* Now we can initialize the JPEG compression object. */ - jpeg_create_compress(&cinfo); - - /* Step 2: specify data destination (eg, a file) */ - /* Note: steps 2 and 3 can be done in either order. */ - - /* Here we use the library-supplied code to send compressed data to a - * stdio stream. You can also write your own code to do something else. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to write binary files. - */ - out = (unsigned char*) ri.Hunk_AllocateTempMemory(image_width*image_height*4); - jpegDest(&cinfo, out, image_width*image_height*4); - - /* Step 3: set parameters for compression */ - - /* First we supply a description of the input image. - * Four fields of the cinfo struct must be filled in: - */ - cinfo.image_width = image_width; /* image width and height, in pixels */ - cinfo.image_height = image_height; - cinfo.input_components = 4; /* # of color components per pixel */ - cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ - /* Now use the library's routine to set default compression parameters. - * (You must set at least cinfo.in_color_space before calling this, - * since the defaults depend on the source color space.) - */ - jpeg_set_defaults(&cinfo); - /* Now you can set any non-default parameters you wish to. - * Here we just illustrate the use of quality (quantization table) scaling: - */ - jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); - - /* Step 4: Start compressor */ - - /* TRUE ensures that we will write a complete interchange-JPEG file. - * Pass TRUE unless you are very sure of what you're doing. - */ - jpeg_start_compress(&cinfo, TRUE); - - /* Step 5: while (scan lines remain to be written) */ - /* jpeg_write_scanlines(...); */ - - /* Here we use the library's state variable cinfo.next_scanline as the - * loop counter, so that we don't have to keep track ourselves. - * To keep things simple, we pass one scanline per call; you can pass - * more if you wish, though. - */ - row_stride = image_width * 4; /* JSAMPLEs per row in image_buffer */ - - while (cinfo.next_scanline < cinfo.image_height) { - /* jpeg_write_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could pass - * more than one scanline at a time if that's more convenient. - */ - row_pointer[0] = & image_buffer[((cinfo.image_height-1)*row_stride)-cinfo.next_scanline * row_stride]; - (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); - } - - /* Step 6: Finish compression */ - - jpeg_finish_compress(&cinfo); - /* After finish_compress, we can close the output file. */ - ri.FS_WriteFile( filename, out, hackSize ); - - ri.Hunk_FreeTempMemory(out); - - /* Step 7: release JPEG compression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_compress(&cinfo); - - /* And we're done! */ + Write_Context context(1024*1024); + if (tje_encode_with_func(jpeg_write_func, &context, 2, image_width, image_height, 4, buffer)) { + ri.FS_WriteFile(filename, context.buffer, context.size); + } + ri.Hunk_FreeTempMemory(buffer); } //=================================================================== diff --git a/third_party/jpeg-6/README b/third_party/jpeg-6/README deleted file mode 100644 index 86cc206..0000000 --- a/third_party/jpeg-6/README +++ /dev/null @@ -1,385 +0,0 @@ -The Independent JPEG Group's JPEG software -========================================== - -README for release 6b of 27-Mar-1998 -==================================== - -This distribution contains the sixth public release of the Independent JPEG -Group's free JPEG software. You are welcome to redistribute this software and -to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. - -Serious users of this software (particularly those incorporating it into -larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to -our electronic mailing list. Mailing list members are notified of updates -and have a chance to participate in technical discussions, etc. - -This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, -Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, -Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG -Group. - -IJG is not affiliated with the official ISO JPEG standards committee. - - -DOCUMENTATION ROADMAP -===================== - -This file contains the following sections: - -OVERVIEW General description of JPEG and the IJG software. -LEGAL ISSUES Copyright, lack of warranty, terms of distribution. -REFERENCES Where to learn more about JPEG. -ARCHIVE LOCATIONS Where to find newer versions of this software. -RELATED SOFTWARE Other stuff you should get. -FILE FORMAT WARS Software *not* to get. -TO DO Plans for future IJG releases. - -Other documentation files in the distribution are: - -User documentation: - install.doc How to configure and install the IJG software. - usage.doc Usage instructions for cjpeg, djpeg, jpegtran, - rdjpgcom, and wrjpgcom. - *.1 Unix-style man pages for programs (same info as usage.doc). - wizard.doc Advanced usage instructions for JPEG wizards only. - change.log Version-to-version change highlights. -Programmer and internal documentation: - libjpeg.doc How to use the JPEG library in your own programs. - example.c Sample code for calling the JPEG library. - structure.doc Overview of the JPEG library's internal structure. - filelist.doc Road map of IJG files. - coderules.doc Coding style rules --- please read if you contribute code. - -Please read at least the files install.doc and usage.doc. Useful information -can also be found in the JPEG FAQ (Frequently Asked Questions) article. See -ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. - -If you want to understand how the JPEG code works, we suggest reading one or -more of the REFERENCES, then looking at the documentation files (in roughly -the order listed) before diving into the code. - - -OVERVIEW -======== - -This package contains C software to implement JPEG image compression and -decompression. JPEG (pronounced "jay-peg") is a standardized compression -method for full-color and gray-scale images. JPEG is intended for compressing -"real-world" scenes; line drawings, cartoons and other non-realistic images -are not its strong suit. JPEG is lossy, meaning that the output image is not -exactly identical to the input image. Hence you must not use JPEG if you -have to have identical output bits. However, on typical photographic images, -very good compression levels can be obtained with no visible change, and -remarkably high compression levels are possible if you can tolerate a -low-quality image. For more details, see the references, or just experiment -with various compression settings. - -This software implements JPEG baseline, extended-sequential, and progressive -compression processes. Provision is made for supporting all variants of these -processes, although some uncommon parameter settings aren't implemented yet. -For legal reasons, we are not distributing code for the arithmetic-coding -variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting -the hierarchical or lossless processes defined in the standard. - -We provide a set of library routines for reading and writing JPEG image files, -plus two sample applications "cjpeg" and "djpeg", which use the library to -perform conversion between JPEG and some other popular image file formats. -The library is intended to be reused in other applications. - -In order to support file conversion and viewing software, we have included -considerable functionality beyond the bare JPEG coding/decoding capability; -for example, the color quantization modules are not strictly part of JPEG -decoding, but they are essential for output to colormapped file formats or -colormapped displays. These extra functions can be compiled out of the -library if not required for a particular application. We have also included -"jpegtran", a utility for lossless transcoding between different JPEG -processes, and "rdjpgcom" and "wrjpgcom", two simple applications for -inserting and extracting textual comments in JFIF files. - -The emphasis in designing this software has been on achieving portability and -flexibility, while also making it fast enough to be useful. In particular, -the software is not intended to be read as a tutorial on JPEG. (See the -REFERENCES section for introductory material.) Rather, it is intended to -be reliable, portable, industrial-strength code. We do not claim to have -achieved that goal in every aspect of the software, but we strive for it. - -We welcome the use of this software as a component of commercial products. -No royalty is required, but we do ask for an acknowledgement in product -documentation, as described under LEGAL ISSUES. - - -LEGAL ISSUES -============ - -In plain English: - -1. We don't promise that this software works. (But if you find any bugs, - please let us know!) -2. You can use this software for whatever you want. You don't have to pay us. -3. You may not pretend that you wrote this software. If you use it in a - program, you must acknowledge somewhere in your documentation that - you've used the IJG code. - -In legalese: - -The authors make NO WARRANTY or representation, either express or implied, -with respect to this software, its quality, accuracy, merchantability, or -fitness for a particular purpose. This software is provided "AS IS", and you, -its user, assume the entire risk as to its quality and accuracy. - -This software is copyright (C) 1991-1998, Thomas G. Lane. -All Rights Reserved except as specified below. - -Permission is hereby granted to use, copy, modify, and distribute this -software (or portions thereof) for any purpose, without fee, subject to these -conditions: -(1) If any part of the source code for this software is distributed, then this -README file must be included, with this copyright and no-warranty notice -unaltered; and any additions, deletions, or changes to the original files -must be clearly indicated in accompanying documentation. -(2) If only executable code is distributed, then the accompanying -documentation must state that "this software is based in part on the work of -the Independent JPEG Group". -(3) Permission for use of this software is granted only if the user accepts -full responsibility for any undesirable consequences; the authors accept -NO LIABILITY for damages of any kind. - -These conditions apply to any software derived from or based on the IJG code, -not just to the unmodified library. If you use our work, you ought to -acknowledge us. - -Permission is NOT granted for the use of any IJG author's name or company name -in advertising or publicity relating to this software or products derived from -it. This software may be referred to only as "the Independent JPEG Group's -software". - -We specifically permit and encourage the use of this software as the basis of -commercial products, provided that all warranty or liability claims are -assumed by the product vendor. - - -ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, -sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. -ansi2knr.c is NOT covered by the above copyright and conditions, but instead -by the usual distribution terms of the Free Software Foundation; principally, -that you must include source code if you redistribute it. (See the file -ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part -of any program generated from the IJG code, this does not limit you more than -the foregoing paragraphs do. - -The Unix configuration script "configure" was produced with GNU Autoconf. -It is copyright by the Free Software Foundation but is freely distributable. -The same holds for its supporting scripts (config.guess, config.sub, -ltconfig, ltmain.sh). Another support script, install-sh, is copyright -by M.I.T. but is also freely distributable. - -It appears that the arithmetic coding option of the JPEG spec is covered by -patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot -legally be used without obtaining one or more licenses. For this reason, -support for arithmetic coding has been removed from the free JPEG software. -(Since arithmetic coding provides only a marginal gain over the unpatented -Huffman mode, it is unlikely that very many implementations will support it.) -So far as we are aware, there are no patent restrictions on the remaining -code. - -The IJG distribution formerly included code to read and write GIF files. -To avoid entanglement with the Unisys LZW patent, GIF reading support has -been removed altogether, and the GIF writer has been simplified to produce -"uncompressed GIFs". This technique does not use the LZW algorithm; the -resulting GIF files are larger than usual, but are readable by all standard -GIF decoders. - -We are required to state that - "The Graphics Interchange Format(c) is the Copyright property of - CompuServe Incorporated. GIF(sm) is a Service Mark property of - CompuServe Incorporated." - - -REFERENCES -========== - -We highly recommend reading one or more of these references before trying to -understand the innards of the JPEG software. - -The best short technical introduction to the JPEG compression algorithm is - Wallace, Gregory K. "The JPEG Still Picture Compression Standard", - Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. -(Adjacent articles in that issue discuss MPEG motion picture compression, -applications of JPEG, and related topics.) If you don't have the CACM issue -handy, a PostScript file containing a revised version of Wallace's article is -available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually -a preprint for an article that appeared in IEEE Trans. Consumer Electronics) -omits the sample images that appeared in CACM, but it includes corrections -and some added material. Note: the Wallace article is copyright ACM and IEEE, -and it may not be used for commercial purposes. - -A somewhat less technical, more leisurely introduction to JPEG can be found in -"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by -M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides -good explanations and example C code for a multitude of compression methods -including JPEG. It is an excellent source if you are comfortable reading C -code but don't know much about data compression in general. The book's JPEG -sample code is far from industrial-strength, but when you are ready to look -at a full implementation, you've got one here... - -The best full description of JPEG is the textbook "JPEG Still Image Data -Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published -by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. -The book includes the complete text of the ISO JPEG standards (DIS 10918-1 -and draft DIS 10918-2). This is by far the most complete exposition of JPEG -in existence, and we highly recommend it. - -The JPEG standard itself is not available electronically; you must order a -paper copy through ISO or ITU. (Unless you feel a need to own a certified -official copy, we recommend buying the Pennebaker and Mitchell book instead; -it's much cheaper and includes a great deal of useful explanatory material.) -In the USA, copies of the standard may be ordered from ANSI Sales at (212) -642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI -doesn't take credit card orders, but Global does.) It's not cheap: as of -1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% -shipping/handling. The standard is divided into two parts, Part 1 being the -actual specification, while Part 2 covers compliance testing methods. Part 1 -is titled "Digital Compression and Coding of Continuous-tone Still Images, -Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS -10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of -Continuous-tone Still Images, Part 2: Compliance testing" and has document -numbers ISO/IEC IS 10918-2, ITU-T T.83. - -Some extensions to the original JPEG standard are defined in JPEG Part 3, -a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG -currently does not support any Part 3 extensions. - -The JPEG standard does not specify all details of an interchangeable file -format. For the omitted details we follow the "JFIF" conventions, revision -1.02. A copy of the JFIF spec is available from: - Literature Department - C-Cube Microsystems, Inc. - 1778 McCarthy Blvd. - Milpitas, CA 95035 - phone (408) 944-6300, fax (408) 944-6314 -A PostScript version of this document is available by FTP at -ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text -version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing -the figures. - -The TIFF 6.0 file format specification can be obtained by FTP from -ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme -found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. -IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). -Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 -(Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or -from ftp://ftp.uu.net/graphics/jpeg/. It is expected that the next revision -of the TIFF spec will replace the 6.0 JPEG design with the Note's design. -Although IJG's own code does not support TIFF/JPEG, the free libtiff library -uses our library to implement TIFF/JPEG per the Note. libtiff is available -from ftp://ftp.sgi.com/graphics/tiff/. - - -ARCHIVE LOCATIONS -================= - -The "official" archive site for this software is ftp.uu.net (Internet -address 192.48.96.9). The most recent released version can always be found -there in directory graphics/jpeg. This particular version will be archived -as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have -direct Internet access, UUNET's archives are also available via UUCP; contact -help@uunet.uu.net for information on retrieving files that way. - -Numerous Internet sites maintain copies of the UUNET files. However, only -ftp.uu.net is guaranteed to have the latest official version. - -You can also obtain this software in DOS-compatible "zip" archive format from -the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or -on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 -"JPEG Tools". Again, these versions may sometimes lag behind the ftp.uu.net -release. - -The JPEG FAQ (Frequently Asked Questions) article is a useful source of -general information about JPEG. It is updated constantly and therefore is -not included in this distribution. The FAQ is posted every two weeks to -Usenet newsgroups comp.graphics.misc, news.answers, and other groups. -It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ -and other news.answers archive sites, including the official news.answers -archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. -If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu -with body - send usenet/news.answers/jpeg-faq/part1 - send usenet/news.answers/jpeg-faq/part2 - - -RELATED SOFTWARE -================ - -Numerous viewing and image manipulation programs now support JPEG. (Quite a -few of them use this library to do so.) The JPEG FAQ described above lists -some of the more popular free and shareware viewers, and tells where to -obtain them on Internet. - -If you are on a Unix machine, we highly recommend Jef Poskanzer's free -PBMPLUS software, which provides many useful operations on PPM-format image -files. In particular, it can convert PPM images to and from a wide range of -other formats, thus making cjpeg/djpeg considerably more useful. The latest -version is distributed by the NetPBM group, and is available from numerous -sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/. -Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is; -you are likely to have difficulty making it work on any non-Unix machine. - -A different free JPEG implementation, written by the PVRG group at Stanford, -is available from ftp://havefun.stanford.edu/pub/jpeg/. This program -is designed for research and experimentation rather than production use; -it is slower, harder to use, and less portable than the IJG code, but it -is easier to read and modify. Also, the PVRG code supports lossless JPEG, -which we do not. (On the other hand, it doesn't do progressive JPEG.) - - -FILE FORMAT WARS -================ - -Some JPEG programs produce files that are not compatible with our library. -The root of the problem is that the ISO JPEG committee failed to specify a -concrete file format. Some vendors "filled in the blanks" on their own, -creating proprietary formats that no one else could read. (For example, none -of the early commercial JPEG implementations for the Macintosh were able to -exchange compressed files.) - -The file format we have adopted is called JFIF (see REFERENCES). This format -has been agreed to by a number of major commercial JPEG vendors, and it has -become the de facto standard. JFIF is a minimal or "low end" representation. -We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF -Technical Note #2) for "high end" applications that need to record a lot of -additional data about an image. TIFF/JPEG is fairly new and not yet widely -supported, unfortunately. - -The upcoming JPEG Part 3 standard defines a file format called SPIFF. -SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should -be able to read the most common variant of SPIFF. SPIFF has some technical -advantages over JFIF, but its major claim to fame is simply that it is an -official standard rather than an informal one. At this point it is unclear -whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto -standard. IJG intends to support SPIFF once the standard is frozen, but we -have not decided whether it should become our default output format or not. -(In any case, our decoder will remain capable of reading JFIF indefinitely.) - -Various proprietary file formats incorporating JPEG compression also exist. -We have little or no sympathy for the existence of these formats. Indeed, -one of the original reasons for developing this free software was to help -force convergence on common, open format standards for JPEG files. Don't -use a proprietary file format! - - -TO DO -===== - -The major thrust for v7 will probably be improvement of visual quality. -The current method for scaling the quantization tables is known not to be -very good at low Q values. We also intend to investigate block boundary -smoothing, "poor man's variable quantization", and other means of improving -quality-vs-file-size performance without sacrificing compatibility. - -In future versions, we are considering supporting some of the upcoming JPEG -Part 3 extensions --- principally, variable quantization and the SPIFF file -format. - -As always, speeding things up is of great interest. - -Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net. diff --git a/third_party/jpeg-6/jcapimin.c b/third_party/jpeg-6/jcapimin.c deleted file mode 100644 index 1cd9736..0000000 --- a/third_party/jpeg-6/jcapimin.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * jcapimin.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-compression case or the transcoding-only - * case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jcapistd.c. But also see jcparam.c for - * parameter-setup helper routines, jcomapi.c for routines shared by - * compression and decompression, and jctrans.c for the transcoding case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG compression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL void -jpeg_create_compress (j_compress_ptr cinfo) -{ - int i; - - /* For debugging purposes, zero the whole master structure. - * But error manager pointer is already there, so save and restore it. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); - cinfo->err = err; - } - cinfo->is_decompressor = FALSE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->dest = NULL; - - cinfo->comp_info = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - cinfo->input_gamma = 1.0; /* in case application forgets */ - - /* OK, I'm ready */ - cinfo->global_state = CSTATE_START; -} - - -/* - * Destruction of a JPEG compression object - */ - -GLOBAL void -jpeg_destroy_compress (j_compress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG compression operation, - * but don't destroy the object itself. - */ - -GLOBAL void -jpeg_abort_compress (j_compress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Forcibly suppress or un-suppress all quantization and Huffman tables. - * Marks all currently defined tables as already written (if suppress) - * or not written (if !suppress). This will control whether they get emitted - * by a subsequent jpeg_start_compress call. - * - * This routine is exported for use by applications that want to produce - * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but - * since it is called by jpeg_start_compress, we put it here --- otherwise - * jcparam.o would be linked whether the application used it or not. - */ - -GLOBAL void -jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) -{ - int i; - JQUANT_TBL * qtbl; - JHUFF_TBL * htbl; - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) - qtbl->sent_table = suppress; - } - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - } -} - - -/* - * Finish JPEG compression. - * - * If a multipass operating mode was selected, this may do a great deal of - * work including most of the actual output. - */ - -GLOBAL void -jpeg_finish_compress (j_compress_ptr cinfo) -{ - JDIMENSION iMCU_row; - - if (cinfo->global_state == CSTATE_SCANNING || - cinfo->global_state == CSTATE_RAW_OK) { - /* Terminate first pass */ - if (cinfo->next_scanline < cinfo->image_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_pass) (cinfo); - } else if (cinfo->global_state != CSTATE_WRCOEFS) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any remaining passes */ - while (! cinfo->master->is_last_pass) { - (*cinfo->master->prepare_for_pass) (cinfo); - for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) iMCU_row; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* We bypass the main controller and invoke coef controller directly; - * all work is being done from the coefficient buffer. - */ - if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } - (*cinfo->master->finish_pass) (cinfo); - } - /* Write EOI, do final cleanup */ - (*cinfo->marker->write_file_trailer) (cinfo); - (*cinfo->dest->term_destination) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); -} - - -/* - * Write a special marker. - * This is only recommended for writing COM or APPn markers. - * Must be called after jpeg_start_compress() and before - * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). - */ - -GLOBAL void -jpeg_write_marker (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen) -{ - if (cinfo->next_scanline != 0 || - (cinfo->global_state != CSTATE_SCANNING && - cinfo->global_state != CSTATE_RAW_OK && - cinfo->global_state != CSTATE_WRCOEFS)) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - (*cinfo->marker->write_any_marker) (cinfo, marker, dataptr, datalen); -} - - -/* - * Alternate compression function: just write an abbreviated table file. - * Before calling this, all parameters and a data destination must be set up. - * - * To produce a pair of files containing abbreviated tables and abbreviated - * image data, one would proceed as follows: - * - * initialize JPEG object - * set JPEG parameters - * set destination to table file - * jpeg_write_tables(cinfo); - * set destination to image file - * jpeg_start_compress(cinfo, FALSE); - * write data... - * jpeg_finish_compress(cinfo); - * - * jpeg_write_tables has the side effect of marking all tables written - * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress - * will not re-emit the tables unless it is passed write_all_tables=TRUE. - */ - -GLOBAL void -jpeg_write_tables (j_compress_ptr cinfo) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Initialize the marker writer ... bit of a crock to do it here. */ - jinit_marker_writer(cinfo); - /* Write them tables! */ - (*cinfo->marker->write_tables_only) (cinfo); - /* And clean up. */ - (*cinfo->dest->term_destination) (cinfo); - /* We can use jpeg_abort to release memory. */ - jpeg_abort((j_common_ptr) cinfo); -} diff --git a/third_party/jpeg-6/jcapistd.c b/third_party/jpeg-6/jcapistd.c deleted file mode 100644 index b99e560..0000000 --- a/third_party/jpeg-6/jcapistd.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * jcapistd.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-compression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_compress, it will end up linking in the entire compressor. - * We thus must separate this file from jcapimin.c to avoid linking the - * whole compression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Compression initialization. - * Before calling this, all parameters and a data destination must be set up. - * - * We require a write_all_tables parameter as a failsafe check when writing - * multiple datastreams from the same compression object. Since prior runs - * will have left all the tables marked sent_table=TRUE, a subsequent run - * would emit an abbreviated stream (no tables) by default. This may be what - * is wanted, but for safety's sake it should not be the default behavior: - * programmers should have to make a deliberate choice to emit abbreviated - * images. Therefore the documentation and examples should encourage people - * to pass write_all_tables=TRUE; then it will take active thought to do the - * wrong thing. - */ - -GLOBAL void -jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (write_all_tables) - jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - jinit_compress_master(cinfo); - /* Set up for the first pass */ - (*cinfo->master->prepare_for_pass) (cinfo); - /* Ready for application to drive first pass through jpeg_write_scanlines - * or jpeg_write_raw_data. - */ - cinfo->next_scanline = 0; - cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); -} - - -/* - * Write some scanlines of data to the JPEG compressor. - * - * The return value will be the number of lines actually written. - * This should be less than the supplied num_lines only in case that - * the data destination module has requested suspension of the compressor, - * or if more than image_height scanlines are passed in. - * - * Note: we warn about excess calls to jpeg_write_scanlines() since - * this likely signals an application programmer error. However, - * excess scanlines passed in the last valid call are *silently* ignored, - * so that the application need not adjust num_lines for end-of-image - * when using a multiple-scanline buffer. - */ - -GLOBAL JDIMENSION -jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION num_lines) -{ - JDIMENSION row_ctr, rows_left; - - if (cinfo->global_state != CSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_scanlines. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_scanlines. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Ignore any extra scanlines at bottom of image. */ - rows_left = cinfo->image_height - cinfo->next_scanline; - if (num_lines > rows_left) - num_lines = rows_left; - - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); - cinfo->next_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to write raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL JDIMENSION -jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION num_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != CSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_raw_data. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_raw_data. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Verify that at least one iMCU row has been passed. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; - if (num_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Directly compress the row. */ - if (! (*cinfo->coef->compress_data) (cinfo, data)) { - /* If compressor did not consume the whole row, suspend processing. */ - return 0; - } - - /* OK, we processed one iMCU row. */ - cinfo->next_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} diff --git a/third_party/jpeg-6/jccoefct.c b/third_party/jpeg-6/jccoefct.c deleted file mode 100644 index ea3169b..0000000 --- a/third_party/jpeg-6/jccoefct.c +++ /dev/null @@ -1,448 +0,0 @@ -/* - * jccoefct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for compression. - * This controller is the top level of the JPEG compressor proper. - * The coefficient buffer lies between forward-DCT and entropy encoding steps. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* We use a full-image coefficient buffer when doing Huffman optimization, - * and also for writing multiple-scan JPEG files. In all cases, the DCT - * step is run during the first pass, and subsequent passes need only read - * the buffered coefficients. - */ -#ifdef ENTROPY_OPT_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#else -#ifdef C_MULTISCAN_FILES_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#endif -#endif - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* For single-pass compression, it's sufficient to buffer just one MCU - * (although this may prove a bit slow in practice). We allocate a - * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each - * MCU constructed and sent. (On 80x86, the workspace is FAR even though - * it's not really very big; this is to keep the module interfaces unchanged - * when a large coefficient buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays. - */ - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -/* Forward declarations */ -METHODDEF boolean compress_data - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#ifdef FULL_COEF_BUFFER_SUPPORTED -METHODDEF boolean compress_first_pass - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -METHODDEF boolean compress_output - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#endif - - -LOCAL void -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (coef->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_data; - break; -#ifdef FULL_COEF_BUFFER_SUPPORTED - case JBUF_SAVE_AND_PASS: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_first_pass; - break; - case JBUF_CRANK_DEST: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_output; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data in the single-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf contains a plane for each component in image. - * For single pass, this is the same as the components in the scan. - */ - -METHODDEF boolean -compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, bi, ci, yindex, yoffset, blockcnt; - JDIMENSION ypos, xpos; - jpeg_component_info *compptr; - - /* Loop to write as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Determine where data comes from in input_buf and do the DCT thing. - * Each call on forward_DCT processes a horizontal row of DCT blocks - * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks - * sequentially. Dummy blocks at the right or bottom edge are filled in - * specially. The data in them does not matter for image reconstruction, - * so we fill them with values that will encode to the smallest amount of - * data, viz: all zeroes in the AC entries, DC entries equal to previous - * block's DC value. (Thanks to Thomas Kinsman for this idea.) - */ - blkn = 0; - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - xpos = MCU_col_num * compptr->MCU_sample_width; - ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[ci], coef->MCU_buffer[blkn], - ypos, xpos, (JDIMENSION) blockcnt); - if (blockcnt < compptr->MCU_width) { - /* Create some dummy blocks at the right edge of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], - (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); - for (bi = blockcnt; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; - } - } - } else { - /* Create a row of dummy blocks at the bottom of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn], - compptr->MCU_width * SIZEOF(JBLOCK)); - for (bi = 0; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; - } - } - blkn += compptr->MCU_width; - ypos += DCTSIZE; - } - } - /* Try to write the MCU. In event of a suspension failure, we will - * re-DCT the MCU on restart (a bit inefficient, could be fixed...) - */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - - -#ifdef FULL_COEF_BUFFER_SUPPORTED - -/* - * Process some data in the first pass of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * This amount of data is read from the source buffer, DCT'd and quantized, - * and saved into the virtual arrays. We also generate suitable dummy blocks - * as needed at the right and lower edges. (The dummy blocks are constructed - * in the virtual arrays, which have been padded appropriately.) This makes - * it possible for subsequent passes not to worry about real vs. dummy blocks. - * - * We must also emit the data to the entropy encoder. This is conveniently - * done by calling compress_output() after we've loaded the current strip - * of the virtual arrays. - * - * NB: input_buf contains a plane for each component in image. All - * components are DCT'd and loaded into the virtual arrays in this pass. - * However, it may be that only a subset of the components are emitted to - * the entropy encoder during this first pass; be careful about looking - * at the scan-dependent variables (MCU dimensions, etc). - */ - -METHODDEF boolean -compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION blocks_across, MCUs_across, MCUindex; - int bi, ci, h_samp_factor, block_row, block_rows, ndummy; - JCOEF lastDC; - jpeg_component_info *compptr; - JBLOCKARRAY buffer; - JBLOCKROW thisblockrow, lastblockrow; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (coef->iMCU_row_num < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here, since may not be set! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - blocks_across = compptr->width_in_blocks; - h_samp_factor = compptr->h_samp_factor; - /* Count number of dummy blocks to be added at the right margin. */ - ndummy = (int) (blocks_across % h_samp_factor); - if (ndummy > 0) - ndummy = h_samp_factor - ndummy; - /* Perform DCT for all non-dummy blocks in this iMCU row. Each call - * on forward_DCT processes a complete horizontal row of DCT blocks. - */ - for (block_row = 0; block_row < block_rows; block_row++) { - thisblockrow = buffer[block_row]; - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[ci], thisblockrow, - (JDIMENSION) (block_row * DCTSIZE), - (JDIMENSION) 0, blocks_across); - if (ndummy > 0) { - /* Create dummy blocks at the right edge of the image. */ - thisblockrow += blocks_across; /* => first dummy block */ - jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); - lastDC = thisblockrow[-1][0]; - for (bi = 0; bi < ndummy; bi++) { - thisblockrow[bi][0] = lastDC; - } - } - } - /* If at end of image, create dummy block rows as needed. - * The tricky part here is that within each MCU, we want the DC values - * of the dummy blocks to match the last real block's DC value. - * This squeezes a few more bytes out of the resulting file... - */ - if (coef->iMCU_row_num == last_iMCU_row) { - blocks_across += ndummy; /* include lower right corner */ - MCUs_across = blocks_across / h_samp_factor; - for (block_row = block_rows; block_row < compptr->v_samp_factor; - block_row++) { - thisblockrow = buffer[block_row]; - lastblockrow = buffer[block_row-1]; - jzero_far((void FAR *) thisblockrow, - (size_t) (blocks_across * SIZEOF(JBLOCK))); - for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { - lastDC = lastblockrow[h_samp_factor-1][0]; - for (bi = 0; bi < h_samp_factor; bi++) { - thisblockrow[bi][0] = lastDC; - } - thisblockrow += h_samp_factor; /* advance to next MCU in row */ - lastblockrow += h_samp_factor; - } - } - } - } - /* NB: compress_output will increment iMCU_row_num if successful. - * A suspension return will result in redoing all the work above next time. - */ - - /* Emit data to the entropy encoder, sharing code with subsequent passes */ - return compress_output(cinfo, input_buf); -} - - -/* - * Process some data in subsequent passes of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF boolean -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. - * NB: during first pass, this is safe only because the buffers will - * already be aligned properly, so jmemmgr.c won't need to do any I/O. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - -#endif /* FULL_COEF_BUFFER_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL void -jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef FULL_COEF_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - int ci; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) compptr->v_samp_factor); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->whole_image[0] = NULL; /* flag for no virtual arrays */ - } -} diff --git a/third_party/jpeg-6/jccolor.c b/third_party/jpeg-6/jccolor.c deleted file mode 100644 index a3cb619..0000000 --- a/third_party/jpeg-6/jccolor.c +++ /dev/null @@ -1,459 +0,0 @@ -/* - * jccolor.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private subobject */ - -typedef struct { - struct jpeg_color_converter pub; /* public fields */ - - /* Private state for RGB->YCC conversion */ - JPEG_INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ -} my_color_converter; - -typedef my_color_converter * my_cconvert_ptr; - - -/**************** RGB -> YCbCr conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B - * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE - * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, - * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and - * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) - * were not represented exactly. Now we sacrifice exact representation of - * maximum red and maximum blue in order to get exact grayscales. - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times R,G,B for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included - * in the tables to save adding them separately in the inner loop. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define CBCR_OFFSET ((JPEG_INT32) CENTERJSAMPLE << SCALEBITS) -#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((JPEG_INT32) ((x) * (1L< Y section */ -#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ -#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ -#define R_CB_OFF (3*(MAXJSAMPLE+1)) -#define G_CB_OFF (4*(MAXJSAMPLE+1)) -#define B_CB_OFF (5*(MAXJSAMPLE+1)) -#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ -#define G_CR_OFF (6*(MAXJSAMPLE+1)) -#define B_CR_OFF (7*(MAXJSAMPLE+1)) -#define TABLE_SIZE (8*(MAXJSAMPLE+1)) - - -/* - * Initialize for RGB->YCC colorspace conversion. - */ - -METHODDEF void -rgb_ycc_start (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - JPEG_INT32 * rgb_ycc_tab; - JPEG_INT32 i; - - /* Allocate and fill in the conversion tables. */ - cconvert->rgb_ycc_tab = rgb_ycc_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (TABLE_SIZE * SIZEOF(JPEG_INT32))); - - for (i = 0; i <= MAXJSAMPLE; i++) { - rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; - rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; - rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; - rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; - rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; - /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. - * This ensures that the maximum output will round to MAXJSAMPLE - * not MAXJSAMPLE+1, and thus that we don't have to range-limit. - */ - rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -/* B=>Cb and R=>Cr tables are the same - rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -*/ - rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; - rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * - * Note that we change from the application's interleaved-pixel format - * to our internal noninterleaved, one-plane-per-component format. - * The input buffer is therefore three times as wide as the output buffer. - * - * A starting row offset is provided only for the output buffer. The caller - * can easily adjust the passed input_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF void -rgb_ycc_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/**************** Cases other than RGB -> YCbCr **************/ - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles RGB->grayscale conversion, which is the same - * as the RGB->Y portion of RGB->YCbCr. - * We assume rgb_ycc_start has been called (we only use the Y tables). - */ - -METHODDEF void -rgb_gray_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* Y */ - outptr[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles Adobe-style CMYK->YCCK conversion, - * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same - * conversion as above, while passing K (black) unchanged. - * We assume rgb_ycc_start has been called. - */ - -METHODDEF void -cmyk_ycck_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register JPEG_INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2, outptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - outptr3 = output_buf[3][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); - g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); - b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); - /* K passes through as-is */ - outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ - inptr += 4; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles grayscale output with no conversion. - * The source can be either plain grayscale or YCbCr (since Y == gray). - */ - -METHODDEF void -grayscale_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - int instride = cinfo->input_components; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ - inptr += instride; - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles multi-component colorspaces without conversion. - * We assume input_components == num_components. - */ - -METHODDEF void -null_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - register int ci; - int nc = cinfo->num_components; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - /* It seems fastest to make a separate pass for each component. */ - for (ci = 0; ci < nc; ci++) { - inptr = *input_buf; - outptr = output_buf[ci][output_row]; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ - inptr += nc; - } - } - input_buf++; - output_row++; - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF void -null_method (j_compress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for input colorspace conversion. - */ - -GLOBAL void -jinit_color_converter (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_converter)); - cinfo->cconvert = (struct jpeg_color_converter *) cconvert; - /* set start_pass to null method until we find out differently */ - cconvert->pub.start_pass = null_method; - - /* Make sure input_components agrees with in_color_space */ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - if (cinfo->input_components != 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_RGB: -#if RGB_PIXELSIZE != 3 - if (cinfo->input_components != RGB_PIXELSIZE) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; -#endif /* else share code with YCbCr */ - - case JCS_YCbCr: - if (cinfo->input_components != 3) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->input_components != 4) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->input_components < 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - } - - /* Check num_components, set conversion method based on requested space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_GRAYSCALE) - cconvert->pub.color_convert = grayscale_convert; - else if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_gray_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = grayscale_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_ycc_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = cmyk_ycck_convert; - } else if (cinfo->in_color_space == JCS_YCCK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: /* allow null conversion of JCS_UNKNOWN */ - if (cinfo->jpeg_color_space != cinfo->in_color_space || - cinfo->num_components != cinfo->input_components) - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - cconvert->pub.color_convert = null_convert; - break; - } -} diff --git a/third_party/jpeg-6/jcdctmgr.c b/third_party/jpeg-6/jcdctmgr.c deleted file mode 100644 index 9ddb8e0..0000000 --- a/third_party/jpeg-6/jcdctmgr.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * jcdctmgr.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the forward-DCT management logic. - * This code selects a particular DCT implementation to be used, - * and it performs related housekeeping chores including coefficient - * quantization. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_forward_dct pub; /* public fields */ - - /* Pointer to the DCT routine actually in use */ - forward_DCT_method_ptr do_dct; - - /* The actual post-DCT divisors --- not identical to the quant table - * entries, because of scaling (especially for an unnormalized DCT). - * Each table is given in normal array order; note that this must - * be converted from the zigzag order of the quantization tables. - */ - DCTELEM * divisors[NUM_QUANT_TBLS]; - -#ifdef DCT_FLOAT_SUPPORTED - /* Same as above for the floating-point case. */ - float_DCT_method_ptr do_float_dct; - FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; -#endif -} my_fdct_controller; - -typedef my_fdct_controller * my_fdct_ptr; - - -/* - * Initialize for a processing pass. - * Verify that all referenced Q-tables are present, and set up - * the divisor table for each one. - * In the current implementation, DCT of all components is done during - * the first pass, even if only some components will be output in the - * first scan. Hence all components should be examined here. - */ - -METHODDEF void -start_pass_fdctmgr (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - int ci, qtblno, i; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; -#ifdef DCT_ISLOW_SUPPORTED - DCTELEM * dtbl; -#endif - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - qtblno = compptr->quant_tbl_no; - /* Make sure specified quantization table is present */ - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - qtbl = cinfo->quant_tbl_ptrs[qtblno]; - /* Compute divisors for this quant table */ - /* We may do this more than once for same table, but it's not a big deal */ - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - /* For LL&M IDCT method, divisors are equal to raw quantization - * coefficients multiplied by 8 (to counteract scaling). - */ - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = ((DCTELEM) qtbl->quantval[jpeg_zigzag_order[i]]) << 3; - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - */ -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits: in natural order */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = (DCTELEM) - DESCALE(MULTIPLY16V16((JPEG_INT32) qtbl->quantval[jpeg_zigzag_order[i]], - (JPEG_INT32) aanscales[i]), - CONST_BITS-3); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - * What's actually stored is 1/divisor so that the inner loop can - * use a multiplication rather than a division. - */ - FAST_FLOAT * fdtbl; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - if (fdct->float_divisors[qtblno] == NULL) { - fdct->float_divisors[qtblno] = (FAST_FLOAT *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(FAST_FLOAT)); - } - fdtbl = fdct->float_divisors[qtblno]; - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fdtbl[i] = (FAST_FLOAT) - (1.0 / (((double) qtbl->quantval[jpeg_zigzag_order[i]] * - aanscalefactor[row] * aanscalefactor[col] * 8.0))); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Perform forward DCT on one or more blocks of a component. - * - * The input samples are taken from the sample_data[] array starting at - * position start_row/start_col, and moving to the right for any additional - * blocks. The quantized coefficients are returned in coef_blocks[]. - */ - -#if 0 // bk001204 -METHODDEF void -forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for integer DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - forward_DCT_method_ptr do_dct = fdct->do_dct; - DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; - DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register DCTELEM *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - } - } -#endif - } - } - - /* Perform the DCT */ - (*do_dct) (workspace); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register DCTELEM temp, qval; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - qval = divisors[i]; - temp = workspace[i]; - /* Divide the coefficient value by qval, ensuring proper rounding. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * - * In most files, at least half of the output values will be zero - * (at default quantization settings, more like three-quarters...) - * so we should ensure that this case is fast. On many machines, - * a comparison is enough cheaper than a divide to make a special test - * a win. Since both inputs will be nonnegative, we need only test - * for a < b to discover whether a/b is 0. - * If your machine's division is fast enough, define FAST_DIVIDE. - */ -#ifdef FAST_DIVIDE -#define DIVIDE_BY(a,b) a /= b -#else -#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 -#endif - if (temp < 0) { - temp = -temp; - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - temp = -temp; - } else { - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - } - output_ptr[i] = (JCOEF) temp; - } - } - } -} -#endif // 0 - -#ifdef DCT_FLOAT_SUPPORTED - -METHODDEF void -forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for floating-point DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - float_DCT_method_ptr do_dct = fdct->do_float_dct; - FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; - FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register FAST_FLOAT *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = (FAST_FLOAT) - (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - } - } -#endif - } - } - - /* Perform the DCT */ - (*do_dct) (workspace); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register FAST_FLOAT temp; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - /* Apply the quantization and scaling factor */ - temp = workspace[i] * divisors[i]; - /* Round to nearest integer. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * The maximum coefficient size is +-16K (for 12-bit data), so this - * code should work for either 16-bit or 32-bit ints. - */ - output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); - } - } - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ - - -/* - * Initialize FDCT manager. - */ - -GLOBAL void -jinit_forward_dct (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct; - int i; - - fdct = (my_fdct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_fdct_controller)); - cinfo->fdct = (struct jpeg_forward_dct *) fdct; - fdct->pub.start_pass = start_pass_fdctmgr; - - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_islow; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_ifast; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - fdct->pub.forward_DCT = forward_DCT_float; - fdct->do_float_dct = jpeg_fdct_float; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - - /* Mark divisor tables unallocated */ - for (i = 0; i < NUM_QUANT_TBLS; i++) { - fdct->divisors[i] = NULL; -#ifdef DCT_FLOAT_SUPPORTED - fdct->float_divisors[i] = NULL; -#endif - } -} diff --git a/third_party/jpeg-6/jchuff.c b/third_party/jpeg-6/jchuff.c deleted file mode 100644 index e651cdc..0000000 --- a/third_party/jpeg-6/jchuff.c +++ /dev/null @@ -1,846 +0,0 @@ -/* - * jchuff.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines. - * - * Much of the complexity here has to do with supporting output suspension. - * If the data destination module demands suspension, we want to be able to - * back up to the start of the current MCU. To do this, we copy state - * variables into local working storage, and update them back to the - * permanent JPEG objects only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jcphuff.c */ - - -/* Expanded entropy encoder object for Huffman encoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - JPEG_INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).put_buffer = (src).put_buffer, \ - (dest).put_bits = (src).put_bits, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - savable_state saved; /* Bit buffer & DC state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - -#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */ - long * dc_count_ptrs[NUM_HUFF_TBLS]; - long * ac_count_ptrs[NUM_HUFF_TBLS]; -#endif -} huff_entropy_encoder; - -typedef huff_entropy_encoder * huff_entropy_ptr; - -/* Working state while writing an MCU. - * This struct contains all the fields that are needed by subroutines. - */ - -typedef struct { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - savable_state cur; /* Current bit buffer & DC state */ - j_compress_ptr cinfo; /* dump_buffer needs access to this */ -} working_state; - - -/* Forward declarations */ -METHODDEF boolean encode_mcu_huff JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF void finish_pass_huff JPP((j_compress_ptr cinfo)); -#ifdef ENTROPY_OPT_SUPPORTED -METHODDEF boolean encode_mcu_gather JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF void finish_pass_gather JPP((j_compress_ptr cinfo)); -#endif - - -/* - * Initialize for a Huffman-compressed scan. - * If gather_statistics is TRUE, we do not output anything during the scan, - * just count the Huffman symbols used and generate Huffman code tables. - */ - -METHODDEF void -start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - entropy->pub.encode_mcu = encode_mcu_gather; - entropy->pub.finish_pass = finish_pass_gather; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - entropy->pub.encode_mcu = encode_mcu_huff; - entropy->pub.finish_pass = finish_pass_huff; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - /* Make sure requested tables are present */ - /* (In gather mode, tables need not be allocated yet) */ - if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS || - (cinfo->dc_huff_tbl_ptrs[dctbl] == NULL && !gather_statistics)) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); - if (actbl < 0 || actbl >= NUM_HUFF_TBLS || - (cinfo->ac_huff_tbl_ptrs[actbl] == NULL && !gather_statistics)) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->dc_count_ptrs[dctbl] == NULL) - entropy->dc_count_ptrs[dctbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long)); - if (entropy->ac_count_ptrs[actbl] == NULL) - entropy->ac_count_ptrs[actbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long)); -#endif - } else { - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl], - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_c_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl], - & entropy->ac_derived_tbls[actbl]); - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bit buffer to empty */ - entropy->saved.put_buffer = 0; - entropy->saved.put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* - * Compute the derived values for a Huffman table. - * Note this is also used by jcphuff.c. - */ - -GLOBAL void -jpeg_make_c_derived_tbl (j_compress_ptr cinfo, JHUFF_TBL * htbl, - c_derived_tbl ** pdtbl) -{ - c_derived_tbl *dtbl; - int p, i, l, lastp, si; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (c_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(c_derived_tbl)); - dtbl = *pdtbl; - - /* Figure C.1: make table of Huffman code length for each symbol */ - /* Note that this is in code-length order. */ - - p = 0; - for (l = 1; l <= 16; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - lastp = p; - - /* Figure C.2: generate the codes themselves */ - /* Note that this is in code-length order. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - code <<= 1; - si++; - } - - /* Figure C.3: generate encoding tables */ - /* These are code and size indexed by symbol value */ - - /* Set any codeless symbols to have code length 0; - * this allows emit_bits to detect any attempt to emit such symbols. - */ - MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); - - for (p = 0; p < lastp; p++) { - dtbl->ehufco[htbl->huffval[p]] = huffcode[p]; - dtbl->ehufsi[htbl->huffval[p]] = huffsize[p]; - } -} - - -/* Outputting bytes to the file */ - -/* Emit a byte, taking 'action' if must suspend. */ -#define emit_byte(state,val,action) \ - { *(state)->next_output_byte++ = (JOCTET) (val); \ - if (--(state)->free_in_buffer == 0) \ - if (! dump_buffer(state)) \ - { action; } } - - -LOCAL boolean -dump_buffer (working_state * state) -/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ -{ - struct jpeg_destination_mgr * dest = state->cinfo->dest; - - if (! (*dest->empty_output_buffer) (state->cinfo)) - return FALSE; - /* After a successful buffer dump, must reset buffer pointers */ - state->next_output_byte = dest->next_output_byte; - state->free_in_buffer = dest->free_in_buffer; - return TRUE; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL boolean -emit_bits (working_state * state, unsigned int code, int size) -/* Emit some bits; return TRUE if successful, FALSE if must suspend */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register JPEG_INT32 put_buffer = (JPEG_INT32) code; - register int put_bits = state->cur.put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); - - put_buffer &= (((JPEG_INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(state, c, return FALSE); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(state, 0, return FALSE); - } - put_buffer <<= 8; - put_bits -= 8; - } - - state->cur.put_buffer = put_buffer; /* update state variables */ - state->cur.put_bits = put_bits; - - return TRUE; -} - - -LOCAL boolean -flush_bits (working_state * state) -{ - if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */ - return FALSE; - state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ - state->cur.put_bits = 0; - return TRUE; -} - - -/* Encode a single block's worth of coefficients */ - -LOCAL boolean -encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, - c_derived_tbl *dctbl, c_derived_tbl *actbl) -{ - register int temp, temp2; - register int nbits; - register int k, r, i; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = temp2 = block[0] - last_dc_val; - - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - - /* Emit the Huffman-coded symbol for the number of bits */ - if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) - return FALSE; - r -= 16; - } - - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - - /* Emit Huffman symbol for run length / number of bits */ - i = (r << 4) + nbits; - if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0])) - return FALSE; - - return TRUE; -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL boolean -emit_restart (working_state * state, int restart_num) -{ - int ci; - - if (! flush_bits(state)) - return FALSE; - - emit_byte(state, 0xFF, return FALSE); - emit_byte(state, JPEG_RST0 + restart_num, return FALSE); - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) - state->cur.last_dc_val[ci] = 0; - - /* The restart counter is not updated until we successfully write the MCU. */ - - return TRUE; -} - - -/* - * Encode and output one MCU's worth of Huffman-compressed coefficients. - */ - -METHODDEF boolean -encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - int blkn, ci; - jpeg_component_info * compptr; - - /* Load up working state */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! emit_restart(&state, entropy->next_restart_num)) - return FALSE; - } - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - if (! encode_one_block(&state, - MCU_data[blkn][0], state.cur.last_dc_val[ci], - entropy->dc_derived_tbls[compptr->dc_tbl_no], - entropy->ac_derived_tbls[compptr->ac_tbl_no])) - return FALSE; - /* Update last_dc_val */ - state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - /* Completed MCU, so update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed scan. - */ - -METHODDEF void -finish_pass_huff (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - - /* Load up working state ... flush_bits needs it */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Flush out the last data */ - if (! flush_bits(&state)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - - /* Update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); -} - - -/* - * Huffman coding optimization. - * - * This actually is optimization, in the sense that we find the best possible - * Huffman table(s) for the given data. We first scan the supplied data and - * count the number of uses of each symbol that is to be Huffman-coded. - * (This process must agree with the code above.) Then we build an - * optimal Huffman coding tree for the observed counts. - * - * The JPEG standard requires Huffman codes to be no more than 16 bits long. - * If some symbols have a very small but nonzero probability, the Huffman tree - * must be adjusted to meet the code length restriction. We currently use - * the adjustment method suggested in the JPEG spec. This method is *not* - * optimal; it may not choose the best possible limited-length code. But - * since the symbols involved are infrequently used, it's not clear that - * going to extra trouble is worthwhile. - */ - -#ifdef ENTROPY_OPT_SUPPORTED - - -/* Process a single block's worth of coefficients */ - -LOCAL void -htest_one_block (JCOEFPTR block, int last_dc_val, - long dc_counts[], long ac_counts[]) -{ - register int temp; - register int nbits; - register int k, r; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = block[0] - last_dc_val; - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - - /* Count the Huffman symbol for the number of bits */ - dc_counts[nbits]++; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - ac_counts[0xF0]++; - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - - /* Count Huffman symbol for run length / number of bits */ - ac_counts[(r << 4) + nbits]++; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - ac_counts[0]++; -} - - -/* - * Trial-encode one MCU's worth of Huffman-compressed coefficients. - * No data is actually output, so no suspension return is possible. - */ - -METHODDEF boolean -encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn, ci; - jpeg_component_info * compptr; - - /* Take care of restart intervals if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Update restart state */ - entropy->restarts_to_go = cinfo->restart_interval; - } - entropy->restarts_to_go--; - } - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - htest_one_block(MCU_data[blkn][0], entropy->saved.last_dc_val[ci], - entropy->dc_count_ptrs[compptr->dc_tbl_no], - entropy->ac_count_ptrs[compptr->ac_tbl_no]); - entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - return TRUE; -} - - -/* - * Generate the optimal coding for the given counts, fill htbl. - * Note this is also used by jcphuff.c. - */ - -GLOBAL void -jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) -{ -#define MAX_CLEN 32 /* assumed maximum initial code length */ - UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ - int codesize[257]; /* codesize[k] = code length of symbol k */ - int others[257]; /* next symbol in current branch of tree */ - int c1, c2; - int p, i, j; - long v; - - /* This algorithm is explained in section K.2 of the JPEG standard */ - - MEMZERO(bits, SIZEOF(bits)); - MEMZERO(codesize, SIZEOF(codesize)); - for (i = 0; i < 257; i++) - others[i] = -1; /* init links to empty */ - - freq[256] = 1; /* make sure there is a nonzero count */ - /* Including the pseudo-symbol 256 in the Huffman procedure guarantees - * that no real symbol is given code-value of all ones, because 256 - * will be placed in the largest codeword category. - */ - - /* Huffman's basic algorithm to assign optimal code lengths to symbols */ - - for (;;) { - /* Find the smallest nonzero frequency, set c1 = its symbol */ - /* In case of ties, take the larger symbol number */ - c1 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v) { - v = freq[i]; - c1 = i; - } - } - - /* Find the next smallest nonzero frequency, set c2 = its symbol */ - /* In case of ties, take the larger symbol number */ - c2 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v && i != c1) { - v = freq[i]; - c2 = i; - } - } - - /* Done if we've merged everything into one frequency */ - if (c2 < 0) - break; - - /* Else merge the two counts/trees */ - freq[c1] += freq[c2]; - freq[c2] = 0; - - /* Increment the codesize of everything in c1's tree branch */ - codesize[c1]++; - while (others[c1] >= 0) { - c1 = others[c1]; - codesize[c1]++; - } - - others[c1] = c2; /* chain c2 onto c1's tree branch */ - - /* Increment the codesize of everything in c2's tree branch */ - codesize[c2]++; - while (others[c2] >= 0) { - c2 = others[c2]; - codesize[c2]++; - } - } - - /* Now count the number of symbols of each code length */ - for (i = 0; i <= 256; i++) { - if (codesize[i]) { - /* The JPEG standard seems to think that this can't happen, */ - /* but I'm paranoid... */ - if (codesize[i] > MAX_CLEN) - ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); - - bits[codesize[i]]++; - } - } - - /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure - * Huffman procedure assigned any such lengths, we must adjust the coding. - * Here is what the JPEG spec says about how this next bit works: - * Since symbols are paired for the longest Huffman code, the symbols are - * removed from this length category two at a time. The prefix for the pair - * (which is one bit shorter) is allocated to one of the pair; then, - * skipping the BITS entry for that prefix length, a code word from the next - * shortest nonzero BITS entry is converted into a prefix for two code words - * one bit longer. - */ - - for (i = MAX_CLEN; i > 16; i--) { - while (bits[i] > 0) { - j = i - 2; /* find length of new prefix to be used */ - while (bits[j] == 0) - j--; - - bits[i] -= 2; /* remove two symbols */ - bits[i-1]++; /* one goes in this length */ - bits[j+1] += 2; /* two new symbols in this length */ - bits[j]--; /* symbol of this length is now a prefix */ - } - } - - /* Remove the count for the pseudo-symbol 256 from the largest codelength */ - while (bits[i] == 0) /* find largest codelength still in use */ - i--; - bits[i]--; - - /* Return final symbol counts (only for lengths 0..16) */ - MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); - - /* Return a list of the symbols sorted by code length */ - /* It's not real clear to me why we don't need to consider the codelength - * changes made above, but the JPEG spec seems to think this works. - */ - p = 0; - for (i = 1; i <= MAX_CLEN; i++) { - for (j = 0; j <= 255; j++) { - if (codesize[j] == i) { - htbl->huffval[p] = (UINT8) j; - p++; - } - } - } - - /* Set sent_table FALSE so updated table will be written to JPEG file. */ - htbl->sent_table = FALSE; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF void -finish_pass_gather (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - boolean did_dc[NUM_HUFF_TBLS]; - boolean did_ac[NUM_HUFF_TBLS]; - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did_dc, SIZEOF(did_dc)); - MEMZERO(did_ac, SIZEOF(did_ac)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - if (! did_dc[dctbl]) { - htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]); - did_dc[dctbl] = TRUE; - } - if (! did_ac[actbl]) { - htblptr = & cinfo->ac_huff_tbl_ptrs[actbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]); - did_ac[actbl] = TRUE; - } - } -} - - -#endif /* ENTROPY_OPT_SUPPORTED */ - - -/* - * Module initialization routine for Huffman entropy encoding. - */ - -GLOBAL void -jinit_huff_encoder (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_huff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; -#ifdef ENTROPY_OPT_SUPPORTED - entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; -#endif - } -} diff --git a/third_party/jpeg-6/jchuff.h b/third_party/jpeg-6/jchuff.h deleted file mode 100644 index f43d571..0000000 --- a/third_party/jpeg-6/jchuff.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * jchuff.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy encoding routines - * that are shared between the sequential encoder (jchuff.c) and the - * progressive encoder (jcphuff.c). No other modules need to see these. - */ - -/* Derived data constructed for each Huffman table */ - -typedef struct { - unsigned int ehufco[256]; /* code for each symbol */ - char ehufsi[256]; /* length of code for each symbol */ - /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ -} c_derived_tbl; - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_c_derived_tbl jMkCDerived -#define jpeg_gen_optimal_table jGenOptTbl -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Expand a Huffman table definition into the derived format */ -EXTERN void jpeg_make_c_derived_tbl JPP((j_compress_ptr cinfo, - JHUFF_TBL * htbl, c_derived_tbl ** pdtbl)); - -/* Generate an optimal table definition given the specified counts */ -EXTERN void jpeg_gen_optimal_table JPP((j_compress_ptr cinfo, - JHUFF_TBL * htbl, long freq[])); diff --git a/third_party/jpeg-6/jcinit.c b/third_party/jpeg-6/jcinit.c deleted file mode 100644 index 2cc82b2..0000000 --- a/third_party/jpeg-6/jcinit.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * jcinit.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains initialization logic for the JPEG compressor. - * This routine is in charge of selecting the modules to be executed and - * making an initialization call to each one. - * - * Logically, this code belongs in jcmaster.c. It's split out because - * linking this routine implies linking the entire compression library. - * For a transcoding-only application, we want to be able to use jcmaster.c - * without linking in the whole library. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Master selection of compression modules. - * This is done once at the start of processing an image. We determine - * which modules will be used and give them appropriate initialization calls. - */ - -GLOBAL void -jinit_compress_master (j_compress_ptr cinfo) -{ - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, FALSE /* full compression */); - - /* Preprocessing */ - if (! cinfo->raw_data_in) { - jinit_color_converter(cinfo); - jinit_downsampler(cinfo); - jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); - } - /* Forward DCT */ - jinit_forward_dct(cinfo); - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); - } - - /* Need a full-image coefficient buffer in any multi-pass mode. */ - jinit_c_coef_controller(cinfo, - (cinfo->num_scans > 1 || cinfo->optimize_coding)); - jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} diff --git a/third_party/jpeg-6/jcmainct.c b/third_party/jpeg-6/jcmainct.c deleted file mode 100644 index 42a02d0..0000000 --- a/third_party/jpeg-6/jcmainct.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * jcmainct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for compression. - * The main buffer lies between the pre-processor and the JPEG - * compressor proper; it holds downsampled data in the JPEG colorspace. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Note: currently, there is no operating mode in which a full-image buffer - * is needed at this step. If there were, that mode could not be used with - * "raw data" input, since this module is bypassed in that case. However, - * we've left the code here for possible use in special applications. - */ -#undef FULL_MAIN_BUFFER_SUPPORTED - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_main_controller pub; /* public fields */ - - JDIMENSION cur_iMCU_row; /* number of current iMCU row */ - JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ - boolean suspended; /* remember if we suspended output */ - J_BUF_MODE pass_mode; /* current operating mode */ - - /* If using just a strip buffer, this points to the entire set of buffers - * (we allocate one for each component). In the full-image case, this - * points to the currently accessible strips of the virtual arrays. - */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* If using full-image storage, this array holds pointers to virtual-array - * control blocks for each component. Unused if not full-image storage. - */ - jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; -#endif -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - - -/* Forward declarations */ -METHODDEF void process_data_simple_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#ifdef FULL_MAIN_BUFFER_SUPPORTED -METHODDEF void process_data_buffer_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - // bk001204 - don't use main... - my_main_ptr jmain = (my_main_ptr) cinfo->main; - - /* Do nothing in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - jmain->cur_iMCU_row = 0; /* initialize counters */ - jmain->rowgroup_ctr = 0; - jmain->suspended = FALSE; - jmain->pass_mode = pass_mode; /* save mode for use by process_data */ - - switch (pass_mode) { - case JBUF_PASS_THRU: -#ifdef FULL_MAIN_BUFFER_SUPPORTED - if (jmain->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - jmain->pub.process_data = process_data_simple_main; - break; -#ifdef FULL_MAIN_BUFFER_SUPPORTED - case JBUF_SAVE_SOURCE: - case JBUF_CRANK_DEST: - case JBUF_SAVE_AND_PASS: - if (jmain->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - jmain->pub.process_data = process_data_buffer_main; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This routine handles the simple pass-through mode, - * where we have only a strip buffer. - */ - -METHODDEF void -process_data_simple_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - // bk001204 - don't use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - - while (jmain->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Read input data if we haven't filled the main buffer yet */ - if (jmain->rowgroup_ctr < DCTSIZE) - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - jmain->buffer, &jmain->rowgroup_ctr, - (JDIMENSION) DCTSIZE); - - /* If we don't have a full iMCU row buffered, return to application for - * more data. Note that preprocessor will always pad to fill the iMCU row - * at the bottom of the image. - */ - if (jmain->rowgroup_ctr != DCTSIZE) - return; - - /* Send the completed row to the compressor */ - if (! (*cinfo->coef->compress_data) (cinfo, jmain->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! jmain->suspended) { - (*in_row_ctr)--; - jmain->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (jmain->suspended) { - (*in_row_ctr)++; - jmain->suspended = FALSE; - } - jmain->rowgroup_ctr = 0; - jmain->cur_iMCU_row++; - } -} - - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - -/* - * Process some data. - * This routine handles all of the modes that use a full-size buffer. - */ - -METHODDEF void -process_data_buffer_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - my_main_ptr main = (my_main_ptr) cinfo->main; - int ci; - jpeg_component_info *compptr; - boolean writing = (main->pass_mode != JBUF_CRANK_DEST); - - while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Realign the virtual buffers if at the start of an iMCU row. */ - if (main->rowgroup_ctr == 0) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main->buffer[ci] = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, main->whole_image[ci], - main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); - } - /* In a read pass, pretend we just read some source data. */ - if (! writing) { - *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; - main->rowgroup_ctr = DCTSIZE; - } - } - - /* If a write pass, read input data until the current iMCU row is full. */ - /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ - if (writing) { - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - main->buffer, &main->rowgroup_ctr, - (JDIMENSION) DCTSIZE); - /* Return to application if we need more data to fill the iMCU row. */ - if (main->rowgroup_ctr < DCTSIZE) - return; - } - - /* Emit data, unless this is a sink-only pass. */ - if (main->pass_mode != JBUF_SAVE_SOURCE) { - if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! main->suspended) { - (*in_row_ctr)--; - main->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (main->suspended) { - (*in_row_ctr)++; - main->suspended = FALSE; - } - } - - /* If get here, we are done with this iMCU row. Mark buffer empty. */ - main->rowgroup_ctr = 0; - main->cur_iMCU_row++; - } -} - -#endif /* FULL_MAIN_BUFFER_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL void -jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - // bk001204 - don't use main - my_main_ptr jmain; - int ci; - jpeg_component_info *compptr; - - jmain = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_c_main_controller *) jmain; - jmain->pub.start_pass = start_pass_main; - - /* We don't need to create a buffer in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - /* Create the buffer. It holds downsampled data, so each component - * may be of a different size. - */ - if (need_full_buffer) { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component */ - /* Note we pad the bottom to a multiple of the iMCU height */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - jmain->whole_image[ci] = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor) * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - jmain->whole_image[0] = NULL; /* flag for no virtual arrays */ -#endif - /* Allocate a strip buffer for each component */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - jmain->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); - } - } -} diff --git a/third_party/jpeg-6/jcmarker.c b/third_party/jpeg-6/jcmarker.c deleted file mode 100644 index f4d290b..0000000 --- a/third_party/jpeg-6/jcmarker.c +++ /dev/null @@ -1,639 +0,0 @@ -/* - * jcmarker.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write JPEG datastream markers. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* - * Basic output routines. - * - * Note that we do not support suspension while writing a marker. - * Therefore, an application using suspension must ensure that there is - * enough buffer space for the initial markers (typ. 600-700 bytes) before - * calling jpeg_start_compress, and enough space to write the trailing EOI - * (a few bytes) before calling jpeg_finish_compress. Multipass compression - * modes are not supported at all with suspension, so those two are the only - * points where markers will be written. - */ - -LOCAL void -emit_byte (j_compress_ptr cinfo, int val) -/* Emit a byte */ -{ - struct jpeg_destination_mgr * dest = cinfo->dest; - - *(dest->next_output_byte)++ = (JOCTET) val; - if (--dest->free_in_buffer == 0) { - if (! (*dest->empty_output_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } -} - - -LOCAL void -emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) -/* Emit a marker code */ -{ - emit_byte(cinfo, 0xFF); - emit_byte(cinfo, (int) mark); -} - - -LOCAL void -emit_2bytes (j_compress_ptr cinfo, int value) -/* Emit a 2-byte integer; these are always MSB first in JPEG files */ -{ - emit_byte(cinfo, (value >> 8) & 0xFF); - emit_byte(cinfo, value & 0xFF); -} - - -/* - * Routines to write specific marker types. - */ - -LOCAL int -emit_dqt (j_compress_ptr cinfo, int index) -/* Emit a DQT marker */ -/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ -{ - JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; - int prec; - int i; - - if (qtbl == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); - - prec = 0; - for (i = 0; i < DCTSIZE2; i++) { - if (qtbl->quantval[i] > 255) - prec = 1; - } - - if (! qtbl->sent_table) { - emit_marker(cinfo, M_DQT); - - emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2); - - emit_byte(cinfo, index + (prec<<4)); - - for (i = 0; i < DCTSIZE2; i++) { - if (prec) - emit_byte(cinfo, qtbl->quantval[i] >> 8); - emit_byte(cinfo, qtbl->quantval[i] & 0xFF); - } - - qtbl->sent_table = TRUE; - } - - return prec; -} - - -LOCAL void -emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) -/* Emit a DHT marker */ -{ - JHUFF_TBL * htbl; - int length, i; - - if (is_ac) { - htbl = cinfo->ac_huff_tbl_ptrs[index]; - index += 0x10; /* output index has AC bit set */ - } else { - htbl = cinfo->dc_huff_tbl_ptrs[index]; - } - - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); - - if (! htbl->sent_table) { - emit_marker(cinfo, M_DHT); - - length = 0; - for (i = 1; i <= 16; i++) - length += htbl->bits[i]; - - emit_2bytes(cinfo, length + 2 + 1 + 16); - emit_byte(cinfo, index); - - for (i = 1; i <= 16; i++) - emit_byte(cinfo, htbl->bits[i]); - - for (i = 0; i < length; i++) - emit_byte(cinfo, htbl->huffval[i]); - - htbl->sent_table = TRUE; - } -} - - -LOCAL void -emit_dac (j_compress_ptr cinfo) -/* Emit a DAC marker */ -/* Since the useful info is so small, we want to emit all the tables in */ -/* one DAC marker. Therefore this routine does its own scan of the table. */ -{ -#ifdef C_ARITH_CODING_SUPPORTED - char dc_in_use[NUM_ARITH_TBLS]; - char ac_in_use[NUM_ARITH_TBLS]; - int length, i; - jpeg_component_info *compptr; - - for (i = 0; i < NUM_ARITH_TBLS; i++) - dc_in_use[i] = ac_in_use[i] = 0; - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - dc_in_use[compptr->dc_tbl_no] = 1; - ac_in_use[compptr->ac_tbl_no] = 1; - } - - length = 0; - for (i = 0; i < NUM_ARITH_TBLS; i++) - length += dc_in_use[i] + ac_in_use[i]; - - emit_marker(cinfo, M_DAC); - - emit_2bytes(cinfo, length*2 + 2); - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - if (dc_in_use[i]) { - emit_byte(cinfo, i); - emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); - } - if (ac_in_use[i]) { - emit_byte(cinfo, i + 0x10); - emit_byte(cinfo, cinfo->arith_ac_K[i]); - } - } -#endif /* C_ARITH_CODING_SUPPORTED */ -} - - -LOCAL void -emit_dri (j_compress_ptr cinfo) -/* Emit a DRI marker */ -{ - emit_marker(cinfo, M_DRI); - - emit_2bytes(cinfo, 4); /* fixed length */ - - emit_2bytes(cinfo, (int) cinfo->restart_interval); -} - - -LOCAL void -emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) -/* Emit a SOF marker */ -{ - int ci; - jpeg_component_info *compptr; - - emit_marker(cinfo, code); - - emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ - - /* Make sure image isn't bigger than SOF field can handle */ - if ((long) cinfo->image_height > 65535L || - (long) cinfo->image_width > 65535L) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); - - emit_byte(cinfo, cinfo->data_precision); - emit_2bytes(cinfo, (int) cinfo->image_height); - emit_2bytes(cinfo, (int) cinfo->image_width); - - emit_byte(cinfo, cinfo->num_components); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - emit_byte(cinfo, compptr->component_id); - emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); - emit_byte(cinfo, compptr->quant_tbl_no); - } -} - - -LOCAL void -emit_sos (j_compress_ptr cinfo) -/* Emit a SOS marker */ -{ - int i, td, ta; - jpeg_component_info *compptr; - - emit_marker(cinfo, M_SOS); - - emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ - - emit_byte(cinfo, cinfo->comps_in_scan); - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - emit_byte(cinfo, compptr->component_id); - td = compptr->dc_tbl_no; - ta = compptr->ac_tbl_no; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan; - * furthermore, Huffman coding of DC refinement uses no table at all. - * We emit 0 for unused field(s); this is recommended by the P&M text - * but does not seem to be specified in the standard. - */ - if (cinfo->Ss == 0) { - ta = 0; /* DC scan */ - if (cinfo->Ah != 0 && !cinfo->arith_code) - td = 0; /* no DC table either */ - } else { - td = 0; /* AC scan */ - } - } - emit_byte(cinfo, (td << 4) + ta); - } - - emit_byte(cinfo, cinfo->Ss); - emit_byte(cinfo, cinfo->Se); - emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); -} - - -LOCAL void -emit_jfif_app0 (j_compress_ptr cinfo) -/* Emit a JFIF-compliant APP0 marker */ -{ - /* - * Length of APP0 block (2 bytes) - * Block ID (4 bytes - ASCII "JFIF") - * Zero byte (1 byte to terminate the ID string) - * Version Major, Minor (2 bytes - 0x01, 0x01) - * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) - * Xdpu (2 bytes - dots per unit horizontal) - * Ydpu (2 bytes - dots per unit vertical) - * Thumbnail X size (1 byte) - * Thumbnail Y size (1 byte) - */ - - emit_marker(cinfo, M_APP0); - - emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ - - emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0x49); - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0); - /* We currently emit version code 1.01 since we use no 1.02 features. - * This may avoid complaints from some older decoders. - */ - emit_byte(cinfo, 1); /* Major version */ - emit_byte(cinfo, 1); /* Minor version */ - emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ - emit_2bytes(cinfo, (int) cinfo->X_density); - emit_2bytes(cinfo, (int) cinfo->Y_density); - emit_byte(cinfo, 0); /* No thumbnail image */ - emit_byte(cinfo, 0); -} - - -LOCAL void -emit_adobe_app14 (j_compress_ptr cinfo) -/* Emit an Adobe APP14 marker */ -{ - /* - * Length of APP14 block (2 bytes) - * Block ID (5 bytes - ASCII "Adobe") - * Version Number (2 bytes - currently 100) - * Flags0 (2 bytes - currently 0) - * Flags1 (2 bytes - currently 0) - * Color transform (1 byte) - * - * Although Adobe TN 5116 mentions Version = 101, all the Adobe files - * now in circulation seem to use Version = 100, so that's what we write. - * - * We write the color transform byte as 1 if the JPEG color space is - * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with - * whether the encoder performed a transformation, which is pretty useless. - */ - - emit_marker(cinfo, M_APP14); - - emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ - - emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ - emit_byte(cinfo, 0x64); - emit_byte(cinfo, 0x6F); - emit_byte(cinfo, 0x62); - emit_byte(cinfo, 0x65); - emit_2bytes(cinfo, 100); /* Version */ - emit_2bytes(cinfo, 0); /* Flags0 */ - emit_2bytes(cinfo, 0); /* Flags1 */ - switch (cinfo->jpeg_color_space) { - case JCS_YCbCr: - emit_byte(cinfo, 1); /* Color transform = 1 */ - break; - case JCS_YCCK: - emit_byte(cinfo, 2); /* Color transform = 2 */ - break; - default: - emit_byte(cinfo, 0); /* Color transform = 0 */ - break; - } -} - - -/* - * This routine is exported for possible use by applications. - * The intended use is to emit COM or APPn markers after calling - * jpeg_start_compress() and before the first jpeg_write_scanlines() call - * (hence, after write_file_header but before write_frame_header). - * Other uses are not guaranteed to produce desirable results. - */ - -METHODDEF void -write_any_marker (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen) -/* Emit an arbitrary marker with parameters */ -{ - if (datalen <= (unsigned int) 65533) { /* safety check */ - emit_marker(cinfo, (JPEG_MARKER) marker); - - emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ - - while (datalen--) { - emit_byte(cinfo, *dataptr); - dataptr++; - } - } -} - - -/* - * Write datastream header. - * This consists of an SOI and optional APPn markers. - * We recommend use of the JFIF marker, but not the Adobe marker, - * when using YCbCr or grayscale data. The JFIF marker should NOT - * be used for any other JPEG colorspace. The Adobe marker is helpful - * to distinguish RGB, CMYK, and YCCK colorspaces. - * Note that an application can write additional header markers after - * jpeg_start_compress returns. - */ - -METHODDEF void -write_file_header (j_compress_ptr cinfo) -{ - emit_marker(cinfo, M_SOI); /* first the SOI */ - - if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ - emit_jfif_app0(cinfo); - if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ - emit_adobe_app14(cinfo); -} - - -/* - * Write frame header. - * This consists of DQT and SOFn markers. - * Note that we do not emit the SOF until we have emitted the DQT(s). - * This avoids compatibility problems with incorrect implementations that - * try to error-check the quant table numbers as soon as they see the SOF. - */ - -METHODDEF void -write_frame_header (j_compress_ptr cinfo) -{ - int ci, prec; - boolean is_baseline; - jpeg_component_info *compptr; - - /* Emit DQT for each quantization table. - * Note that emit_dqt() suppresses any duplicate tables. - */ - prec = 0; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prec += emit_dqt(cinfo, compptr->quant_tbl_no); - } - /* now prec is nonzero iff there are any 16-bit quant tables. */ - - /* Check for a non-baseline specification. - * Note we assume that Huffman table numbers won't be changed later. - */ - if (cinfo->arith_code || cinfo->progressive_mode || - cinfo->data_precision != 8) { - is_baseline = FALSE; - } else { - is_baseline = TRUE; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) - is_baseline = FALSE; - } - if (prec && is_baseline) { - is_baseline = FALSE; - /* If it's baseline except for quantizer size, warn the user */ - TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); - } - } - - /* Emit the proper SOF marker */ - if (cinfo->arith_code) { - emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */ - } else { - if (cinfo->progressive_mode) - emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ - else if (is_baseline) - emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ - else - emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ - } -} - - -/* - * Write scan header. - * This consists of DHT or DAC markers, optional DRI, and SOS. - * Compressed data will be written following the SOS. - */ - -METHODDEF void -write_scan_header (j_compress_ptr cinfo) -{ - int i; - jpeg_component_info *compptr; - - if (cinfo->arith_code) { - /* Emit arith conditioning info. We may have some duplication - * if the file has multiple scans, but it's so small it's hardly - * worth worrying about. - */ - emit_dac(cinfo); - } else { - /* Emit Huffman tables. - * Note that emit_dht() suppresses any duplicate tables. - */ - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan */ - if (cinfo->Ss == 0) { - if (cinfo->Ah == 0) /* DC needs no table for refinement scan */ - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - } else { - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } else { - /* Sequential mode: need both DC and AC tables */ - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } - } - - /* Emit DRI if required --- note that DRI value could change for each scan. - * If it doesn't, a tiny amount of space is wasted in multiple-scan files. - * We assume DRI will never be nonzero for one scan and zero for a later one. - */ - if (cinfo->restart_interval) - emit_dri(cinfo); - - emit_sos(cinfo); -} - - -/* - * Write datastream trailer. - */ - -METHODDEF void -write_file_trailer (j_compress_ptr cinfo) -{ - emit_marker(cinfo, M_EOI); -} - - -/* - * Write an abbreviated table-specification datastream. - * This consists of SOI, DQT and DHT tables, and EOI. - * Any table that is defined and not marked sent_table = TRUE will be - * emitted. Note that all tables will be marked sent_table = TRUE at exit. - */ - -METHODDEF void -write_tables_only (j_compress_ptr cinfo) -{ - int i; - - emit_marker(cinfo, M_SOI); - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if (cinfo->quant_tbl_ptrs[i] != NULL) - (void) emit_dqt(cinfo, i); - } - - if (! cinfo->arith_code) { - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if (cinfo->dc_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, FALSE); - if (cinfo->ac_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, TRUE); - } - } - - emit_marker(cinfo, M_EOI); -} - - -/* - * Initialize the marker writer module. - */ - -GLOBAL void -jinit_marker_writer (j_compress_ptr cinfo) -{ - /* Create the subobject */ - cinfo->marker = (struct jpeg_marker_writer *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(struct jpeg_marker_writer)); - /* Initialize method pointers */ - cinfo->marker->write_any_marker = write_any_marker; - cinfo->marker->write_file_header = write_file_header; - cinfo->marker->write_frame_header = write_frame_header; - cinfo->marker->write_scan_header = write_scan_header; - cinfo->marker->write_file_trailer = write_file_trailer; - cinfo->marker->write_tables_only = write_tables_only; -} diff --git a/third_party/jpeg-6/jcmaster.c b/third_party/jpeg-6/jcmaster.c deleted file mode 100644 index 84494e6..0000000 --- a/third_party/jpeg-6/jcmaster.c +++ /dev/null @@ -1,578 +0,0 @@ -/* - * jcmaster.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG compressor. - * These routines are concerned with parameter validation, initial setup, - * and inter-pass control (determining the number of passes and the work - * to be done in each pass). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef enum { - main_pass, /* input data, also do first output step */ - huff_opt_pass, /* Huffman code optimization pass */ - output_pass /* data output pass */ -} c_pass_type; - -typedef struct { - struct jpeg_comp_master pub; /* public fields */ - - c_pass_type pass_type; /* the type of the current pass */ - - int pass_number; /* # of passes completed */ - int total_passes; /* total # of passes needed */ - - int scan_number; /* current index in scan_info[] */ -} my_comp_master; - -typedef my_comp_master * my_master_ptr; - - -/* - * Support routines that do various essential calculations. - */ - -LOCAL void -initial_setup (j_compress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ - int ci; - jpeg_component_info *compptr; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Sanity check on image dimensions */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0 || cinfo->input_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* Width of an input scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Fill in the correct component_index value; don't rely on application */ - compptr->component_index = ci; - /* For compression, we never do DCT scaling. */ - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed (this flag isn't actually used for compression) */ - compptr->component_needed = TRUE; - } - - /* Compute number of fully interleaved MCU rows (number of times that - * main controller will call coefficient controller). - */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL void -validate_script (j_compress_ptr cinfo) -/* Verify that the scan script in cinfo->scan_info[] is valid; also - * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. - */ -{ - const jpeg_scan_info * scanptr; - int scanno, ncomps, ci, coefi, thisi; - int Ss, Se, Ah, Al; - boolean component_sent[MAX_COMPONENTS]; -#ifdef C_PROGRESSIVE_SUPPORTED - int * last_bitpos_ptr; - int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; - /* -1 until that coefficient has been seen; then last Al for it */ -#endif - - if (cinfo->num_scans <= 0) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); - - /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; - * for progressive JPEG, no scan can have this. - */ - scanptr = cinfo->scan_info; - if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { -#ifdef C_PROGRESSIVE_SUPPORTED - cinfo->progressive_mode = TRUE; - last_bitpos_ptr = & last_bitpos[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (coefi = 0; coefi < DCTSIZE2; coefi++) - *last_bitpos_ptr++ = -1; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - for (ci = 0; ci < cinfo->num_components; ci++) - component_sent[ci] = FALSE; - } - - for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { - /* Validate component indexes */ - ncomps = scanptr->comps_in_scan; - if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (thisi < 0 || thisi >= cinfo->num_components) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - /* Components must appear in SOF order within each scan */ - if (ci > 0 && thisi <= scanptr->component_index[ci-1]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - } - /* Validate progression parameters */ - Ss = scanptr->Ss; - Se = scanptr->Se; - Ah = scanptr->Ah; - Al = scanptr->Al; - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || - Ah < 0 || Ah > 13 || Al < 0 || Al > 13) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - if (Ss == 0) { - if (Se != 0) /* DC and AC together not OK */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - if (ncomps != 1) /* AC scans must be for only one component */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - for (ci = 0; ci < ncomps; ci++) { - last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; - if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - for (coefi = Ss; coefi <= Se; coefi++) { - if (last_bitpos_ptr[coefi] < 0) { - /* first scan of this coefficient */ - if (Ah != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - /* not first scan */ - if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - last_bitpos_ptr[coefi] = Al; - } - } -#endif - } else { - /* For sequential JPEG, all progression parameters must be these: */ - if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - /* Make sure components are not sent twice */ - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (component_sent[thisi]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - component_sent[thisi] = TRUE; - } - } - } - - /* Now verify that everything got sent. */ - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* For progressive mode, we only check that at least some DC data - * got sent for each component; the spec does not require that all bits - * of all coefficients be transmitted. Would it be wiser to enforce - * transmission of all coefficient bits?? - */ - for (ci = 0; ci < cinfo->num_components; ci++) { - if (last_bitpos[ci][0] < 0) - ERREXIT(cinfo, JERR_MISSING_DATA); - } -#endif - } else { - for (ci = 0; ci < cinfo->num_components; ci++) { - if (! component_sent[ci]) - ERREXIT(cinfo, JERR_MISSING_DATA); - } - } -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -LOCAL void -select_scan_parameters (j_compress_ptr cinfo) -/* Set up the scan parameters for the current scan */ -{ - int ci; - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (cinfo->scan_info != NULL) { - /* Prepare for current scan --- the script is already validated */ - my_master_ptr master = (my_master_ptr) cinfo->master; - const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; - - cinfo->comps_in_scan = scanptr->comps_in_scan; - for (ci = 0; ci < scanptr->comps_in_scan; ci++) { - cinfo->cur_comp_info[ci] = - &cinfo->comp_info[scanptr->component_index[ci]]; - } - cinfo->Ss = scanptr->Ss; - cinfo->Se = scanptr->Se; - cinfo->Ah = scanptr->Ah; - cinfo->Al = scanptr->Al; - } - else -#endif - { - /* Prepare for single sequential-JPEG scan containing all components */ - if (cinfo->num_components > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPS_IN_SCAN); - cinfo->comps_in_scan = cinfo->num_components; - for (ci = 0; ci < cinfo->num_components; ci++) { - cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; - } - cinfo->Ss = 0; - cinfo->Se = DCTSIZE2-1; - cinfo->Ah = 0; - cinfo->Al = 0; - } -} - - -LOCAL void -per_scan_setup (j_compress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = DCTSIZE; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } - - /* Convert restart specified in rows to actual MCU count. */ - /* Note that count must fit in 16 bits, so we provide limiting. */ - if (cinfo->restart_in_rows > 0) { - long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; - cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); - } -} - - -/* - * Per-pass setup. - * This is called at the beginning of each pass. We determine which modules - * will be active during this pass and give them appropriate start_pass calls. - * We also set is_last_pass to indicate whether any more passes will be - * required. - */ - -METHODDEF void -prepare_for_pass (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - switch (master->pass_type) { - case main_pass: - /* Initial pass: will collect input data, and do either Huffman - * optimization or data output for the first scan. - */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (! cinfo->raw_data_in) { - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->downsample->start_pass) (cinfo); - (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); - } - (*cinfo->fdct->start_pass) (cinfo); - (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); - (*cinfo->coef->start_pass) (cinfo, - (master->total_passes > 1 ? - JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - if (cinfo->optimize_coding) { - /* No immediate data output; postpone writing frame/scan headers */ - master->pub.call_pass_startup = FALSE; - } else { - /* Will write frame/scan headers at first jpeg_write_scanlines call */ - master->pub.call_pass_startup = TRUE; - } - break; -#ifdef ENTROPY_OPT_SUPPORTED - case huff_opt_pass: - /* Do Huffman optimization for a scan after the first one. */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { - (*cinfo->entropy->start_pass) (cinfo, TRUE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - master->pub.call_pass_startup = FALSE; - break; - } - /* Special case: Huffman DC refinement scans need no Huffman table - * and therefore we can skip the optimization pass for them. - */ - master->pass_type = output_pass; - master->pass_number++; - /*FALLTHROUGH*/ -#endif - case output_pass: - /* Do a data-output pass. */ - /* We need not repeat per-scan setup if prior optimization pass did it. */ - if (! cinfo->optimize_coding) { - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - } - (*cinfo->entropy->start_pass) (cinfo, FALSE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - /* We emit frame/scan headers now */ - if (master->scan_number == 0) - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); - master->pub.call_pass_startup = FALSE; - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - } - - master->pub.is_last_pass = (master->pass_number == master->total_passes-1); - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->total_passes; - } -} - - -/* - * Special start-of-pass hook. - * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. - * In single-pass processing, we need this hook because we don't want to - * write frame/scan headers during jpeg_start_compress; we want to let the - * application write COM markers etc. between jpeg_start_compress and the - * jpeg_write_scanlines loop. - * In multi-pass processing, this routine is not used. - */ - -METHODDEF void -pass_startup (j_compress_ptr cinfo) -{ - cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ - - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); -} - - -/* - * Finish up at end of pass. - */ - -METHODDEF void -finish_pass_master (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* The entropy coder always needs an end-of-pass call, - * either to analyze statistics or to flush its output buffer. - */ - (*cinfo->entropy->finish_pass) (cinfo); - - /* Update state for next pass */ - switch (master->pass_type) { - case main_pass: - /* next pass is either output of scan 0 (after optimization) - * or output of scan 1 (if no optimization). - */ - master->pass_type = output_pass; - if (! cinfo->optimize_coding) - master->scan_number++; - break; - case huff_opt_pass: - /* next pass is always output of current scan */ - master->pass_type = output_pass; - break; - case output_pass: - /* next pass is either optimization or output of next scan */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - master->scan_number++; - break; - } - - master->pass_number++; -} - - -/* - * Initialize master compression control. - */ - -GLOBAL void -jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_comp_master)); - cinfo->master = (struct jpeg_comp_master *) master; - master->pub.prepare_for_pass = prepare_for_pass; - master->pub.pass_startup = pass_startup; - master->pub.finish_pass = finish_pass_master; - master->pub.is_last_pass = FALSE; - - /* Validate parameters, determine derived values */ - initial_setup(cinfo); - - if (cinfo->scan_info != NULL) { -#ifdef C_MULTISCAN_FILES_SUPPORTED - validate_script(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - cinfo->num_scans = 1; - } - - if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ - cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ - - /* Initialize my private state */ - if (transcode_only) { - /* no main pass in transcoding */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - else - master->pass_type = output_pass; - } else { - /* for normal compression, first pass is always this type: */ - master->pass_type = main_pass; - } - master->scan_number = 0; - master->pass_number = 0; - if (cinfo->optimize_coding) - master->total_passes = cinfo->num_scans * 2; - else - master->total_passes = cinfo->num_scans; -} diff --git a/third_party/jpeg-6/jcomapi.c b/third_party/jpeg-6/jcomapi.c deleted file mode 100644 index c10903f..0000000 --- a/third_party/jpeg-6/jcomapi.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * jcomapi.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface routines that are used for both - * compression and decompression. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Abort processing of a JPEG compression or decompression operation, - * but don't destroy the object itself. - * - * For this, we merely clean up all the nonpermanent memory pools. - * Note that temp files (virtual arrays) are not allowed to belong to - * the permanent pool, so we will be able to close all temp files here. - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL void -jpeg_abort (j_common_ptr cinfo) -{ - int pool; - - /* Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { - (*cinfo->mem->free_pool) (cinfo, pool); - } - - /* Reset overall state for possible reuse of object */ - cinfo->global_state = (cinfo->is_decompressor ? DSTATE_START : CSTATE_START); -} - - -/* - * Destruction of a JPEG object. - * - * Everything gets deallocated except the master jpeg_compress_struct itself - * and the error manager struct. Both of these are supplied by the application - * and must be freed, if necessary, by the application. (Often they are on - * the stack and so don't need to be freed anyway.) - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL void -jpeg_destroy (j_common_ptr cinfo) -{ - /* We need only tell the memory manager to release everything. */ - /* NB: mem pointer is NULL if memory mgr failed to initialize. */ - if (cinfo->mem != NULL) - (*cinfo->mem->self_destruct) (cinfo); - cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ - cinfo->global_state = 0; /* mark it destroyed */ -} - - -/* - * Convenience routines for allocating quantization and Huffman tables. - * (Would jutils.c be a more reasonable place to put these?) - */ - -GLOBAL JQUANT_TBL * -jpeg_alloc_quant_table (j_common_ptr cinfo) -{ - JQUANT_TBL *tbl; - - tbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} - - -GLOBAL JHUFF_TBL * -jpeg_alloc_huff_table (j_common_ptr cinfo) -{ - JHUFF_TBL *tbl; - - tbl = (JHUFF_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} diff --git a/third_party/jpeg-6/jconfig.h b/third_party/jpeg-6/jconfig.h deleted file mode 100644 index 7d2f733..0000000 --- a/third_party/jpeg-6/jconfig.h +++ /dev/null @@ -1,41 +0,0 @@ -/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#define CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#define JDCT_DEFAULT JDCT_FLOAT -#define JDCT_FASTEST JDCT_FLOAT - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in Watcom */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/third_party/jpeg-6/jcparam.c b/third_party/jpeg-6/jcparam.c deleted file mode 100644 index 29862d3..0000000 --- a/third_party/jpeg-6/jcparam.c +++ /dev/null @@ -1,575 +0,0 @@ -/* - * jcparam.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains optional default-setting code for the JPEG compressor. - * Applications do not have to use this file, but those that don't use it - * must know a lot more about the innards of the JPEG code. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Quantization table setup routines - */ - -GLOBAL void -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) -/* Define a quantization table equal to the basic_table times - * a scale factor (given as a percentage). - * If force_baseline is TRUE, the computed quantization table entries - * are limited to 1..255 for JPEG baseline compatibility. - */ -{ - JQUANT_TBL ** qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; - int i; - long temp; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); - - for (i = 0; i < DCTSIZE2; i++) { - temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; - /* limit the values to the valid range */ - if (temp <= 0L) temp = 1L; - if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ - if (force_baseline && temp > 255L) - temp = 255L; /* limit to baseline range if requested */ - (*qtblptr)->quantval[i] = (UINT16) temp; - } - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*qtblptr)->sent_table = FALSE; -} - - -GLOBAL void -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and a straight percentage-scaling quality scale. In most cases it's better - * to use jpeg_set_quality (below); this entry point is provided for - * applications that insist on a linear percentage scaling. - */ -{ - /* This is the sample quantization table given in the JPEG spec section K.1, - * but expressed in zigzag order (as are all of our quant. tables). - * The spec says that the values given produce "good" quality, and - * when divided by 2, "very good" quality. - */ - static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { - 16, 11, 12, 14, 12, 10, 16, 14, - 13, 14, 18, 17, 16, 19, 24, 40, - 26, 24, 22, 22, 24, 49, 35, 37, - 29, 40, 58, 51, 61, 60, 57, 51, - 56, 55, 64, 72, 92, 78, 64, 68, - 87, 69, 55, 56, 80, 109, 81, 87, - 95, 98, 103, 104, 103, 62, 77, 113, - 121, 112, 100, 120, 92, 101, 103, 99 - }; - static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { - 17, 18, 18, 24, 21, 24, 47, 26, - 26, 47, 99, 66, 56, 66, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 - }; - - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - scale_factor, force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - scale_factor, force_baseline); -} - - -GLOBAL int -jpeg_quality_scaling (int quality) -/* Convert a user-specified quality rating to a percentage scaling factor - * for an underlying quantization table, using our recommended scaling curve. - * The input 'quality' factor should be 0 (terrible) to 100 (very good). - */ -{ - /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ - if (quality <= 0) quality = 1; - if (quality > 100) quality = 100; - - /* The basic table is used as-is (scaling 100) for a quality of 50. - * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; - * note that at Q=100 the scaling is 0, which will cause j_add_quant_table - * to make all the table entries 1 (hence, no quantization loss). - * Qualities 1..50 are converted to scaling percentage 5000/Q. - */ - if (quality < 50) - quality = 5000 / quality; - else - quality = 200 - quality*2; - - return quality; -} - - -GLOBAL void -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables. - * This is the standard quality-adjusting entry point for typical user - * interfaces; only those who want detailed control over quantization tables - * would use the preceding three routines directly. - */ -{ - /* Convert user 0-100 rating to percentage scaling */ - quality = jpeg_quality_scaling(quality); - - /* Set up standard quality tables */ - jpeg_set_linear_quality(cinfo, quality, force_baseline); -} - - -/* - * Huffman table setup routines - */ - -LOCAL void -add_huff_table (j_compress_ptr cinfo, - JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) -/* Define a Huffman table */ -{ - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, val, SIZEOF((*htblptr)->huffval)); - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*htblptr)->sent_table = FALSE; -} - - -LOCAL void -std_huff_tables (j_compress_ptr cinfo) -/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ -/* IMPORTANT: these are only valid for 8-bit data precision! */ -{ - static const UINT8 bits_dc_luminance[17] = - { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_luminance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_dc_chrominance[17] = - { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_chrominance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_ac_luminance[17] = - { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; - static const UINT8 val_ac_luminance[] = - { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, - 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, - 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, - 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, - 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, - 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, - 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, - 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, - 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, - 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, - 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, - 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, - 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, - 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - static const UINT8 bits_ac_chrominance[17] = - { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; - static const UINT8 val_ac_chrominance[] = - { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, - 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, - 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, - 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, - 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, - 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, - 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, - 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, - 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, - 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], - bits_dc_luminance, val_dc_luminance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], - bits_ac_luminance, val_ac_luminance); - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], - bits_dc_chrominance, val_dc_chrominance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], - bits_ac_chrominance, val_ac_chrominance); -} - - -/* - * Default parameter setup for compression. - * - * Applications that don't choose to use this routine must do their - * own setup of all these parameters. Alternately, you can call this - * to establish defaults and then alter parameters selectively. This - * is the recommended approach since, if we add any new parameters, - * your code will still work (they'll be set to reasonable defaults). - */ - -GLOBAL void -jpeg_set_defaults (j_compress_ptr cinfo) -{ - int i; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Allocate comp_info array large enough for maximum component count. - * Array is made permanent in case application wants to compress - * multiple images at same param settings. - */ - if (cinfo->comp_info == NULL) - cinfo->comp_info = (jpeg_component_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - MAX_COMPONENTS * SIZEOF(jpeg_component_info)); - - /* Initialize everything not dependent on the color space */ - - cinfo->data_precision = BITS_IN_JSAMPLE; - /* Set up two quantization tables using default quality of 75 */ - jpeg_set_quality(cinfo, 75, TRUE); - /* Set up two Huffman tables */ - std_huff_tables(cinfo); - - /* Initialize default arithmetic coding conditioning */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - - /* Default is no multiple-scan output */ - cinfo->scan_info = NULL; - cinfo->num_scans = 0; - - /* Expect normal source image, not raw downsampled data */ - cinfo->raw_data_in = FALSE; - - /* Use Huffman coding, not arithmetic coding, by default */ - cinfo->arith_code = FALSE; - - /* By default, don't do extra passes to optimize entropy coding */ - cinfo->optimize_coding = FALSE; - /* The standard Huffman tables are only valid for 8-bit data precision. - * If the precision is higher, force optimization on so that usable - * tables will be computed. This test can be removed if default tables - * are supplied that are valid for the desired precision. - */ - if (cinfo->data_precision > 8) - cinfo->optimize_coding = TRUE; - - /* By default, use the simpler non-cosited sampling alignment */ - cinfo->CCIR601_sampling = FALSE; - - /* No input smoothing */ - cinfo->smoothing_factor = 0; - - /* DCT algorithm preference */ - cinfo->dct_method = JDCT_DEFAULT; - - /* No restart markers */ - cinfo->restart_interval = 0; - cinfo->restart_in_rows = 0; - - /* Fill in default JFIF marker parameters. Note that whether the marker - * will actually be written is determined by jpeg_set_colorspace. - */ - cinfo->density_unit = 0; /* Pixel size is unknown by default */ - cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ - cinfo->Y_density = 1; - - /* Choose JPEG colorspace based on input space, set defaults accordingly */ - - jpeg_default_colorspace(cinfo); -} - - -/* - * Select an appropriate JPEG colorspace for in_color_space. - */ - -GLOBAL void -jpeg_default_colorspace (j_compress_ptr cinfo) -{ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - break; - case JCS_RGB: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_YCbCr: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_CMYK: - jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ - break; - case JCS_YCCK: - jpeg_set_colorspace(cinfo, JCS_YCCK); - break; - case JCS_UNKNOWN: - jpeg_set_colorspace(cinfo, JCS_UNKNOWN); - break; - default: - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - } -} - - -/* - * Set the JPEG colorspace, and choose colorspace-dependent default values. - */ - -GLOBAL void -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) -{ - jpeg_component_info * compptr; - int ci; - -#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ - (compptr = &cinfo->comp_info[index], \ - compptr->component_id = (id), \ - compptr->h_samp_factor = (hsamp), \ - compptr->v_samp_factor = (vsamp), \ - compptr->quant_tbl_no = (quant), \ - compptr->dc_tbl_no = (dctbl), \ - compptr->ac_tbl_no = (actbl) ) - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* For all colorspaces, we use Q and Huff tables 0 for luminance components, - * tables 1 for chrominance components. - */ - - cinfo->jpeg_color_space = colorspace; - - cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ - cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ - - switch (colorspace) { - case JCS_GRAYSCALE: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 1; - /* JFIF specifies component ID 1 */ - SET_COMP(0, 1, 1,1, 0, 0,0); - break; - case JCS_RGB: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ - cinfo->num_components = 3; - SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); - SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); - SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); - break; - case JCS_YCbCr: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 3; - /* JFIF specifies component IDs 1,2,3 */ - /* We default to 2x2 subsamples of chrominance */ - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - break; - case JCS_CMYK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ - cinfo->num_components = 4; - SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); - SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); - SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); - SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); - break; - case JCS_YCCK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ - cinfo->num_components = 4; - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - SET_COMP(3, 4, 2,2, 0, 0,0); - break; - case JCS_UNKNOWN: - cinfo->num_components = cinfo->input_components; - if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - for (ci = 0; ci < cinfo->num_components; ci++) { - SET_COMP(ci, ci, 1,1, 0, 0,0); - } - break; - default: - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - } -} - - -#ifdef C_PROGRESSIVE_SUPPORTED - -LOCAL jpeg_scan_info * -fill_a_scan (jpeg_scan_info * scanptr, int ci, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for specified component */ -{ - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - return scanptr; -} - -LOCAL jpeg_scan_info * -fill_scans (jpeg_scan_info * scanptr, int ncomps, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for each component */ -{ - int ci; - - for (ci = 0; ci < ncomps; ci++) { - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } - return scanptr; -} - -LOCAL jpeg_scan_info * -fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) -/* Support routine: generate interleaved DC scan if possible, else N scans */ -{ - int ci; - - if (ncomps <= MAX_COMPS_IN_SCAN) { - /* Single interleaved DC scan */ - scanptr->comps_in_scan = ncomps; - for (ci = 0; ci < ncomps; ci++) - scanptr->component_index[ci] = ci; - scanptr->Ss = scanptr->Se = 0; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } else { - /* Noninterleaved DC scan for each component */ - scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); - } - return scanptr; -} - - -/* - * Create a recommended progressive-JPEG script. - * cinfo->num_components and cinfo->jpeg_color_space must be correct. - */ - -GLOBAL void -jpeg_simple_progression (j_compress_ptr cinfo) -{ - int ncomps = cinfo->num_components; - int nscans; - jpeg_scan_info * scanptr; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Figure space needed for script. Calculation must match code below! */ - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - nscans = 10; - } else { - /* All-purpose script for other color spaces. */ - if (ncomps > MAX_COMPS_IN_SCAN) - nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ - else - nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ - } - - /* Allocate space for script. */ - /* We use permanent pool just in case application re-uses script. */ - scanptr = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - nscans * SIZEOF(jpeg_scan_info)); - cinfo->scan_info = scanptr; - cinfo->num_scans = nscans; - - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - /* Initial DC scan */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - /* Initial AC scan: get some luma data out in a hurry */ - scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); - /* Chroma data is too small to be worth expending many scans on */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); - /* Complete spectral selection for luma AC */ - scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); - /* Refine next bit of luma AC */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); - /* Finish DC successive approximation */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - /* Finish AC successive approximation */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); - /* Luma bottom bit comes last since it's usually largest scan */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); - } else { - /* All-purpose script for other color spaces. */ - /* Successive approximation first pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); - scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); - /* Successive approximation second pass */ - scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); - /* Successive approximation final pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); - } -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/third_party/jpeg-6/jcphuff.c b/third_party/jpeg-6/jcphuff.c deleted file mode 100644 index 95dc639..0000000 --- a/third_party/jpeg-6/jcphuff.c +++ /dev/null @@ -1,829 +0,0 @@ -/* - * jcphuff.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines for progressive JPEG. - * - * We do not support output suspension in this module, since the library - * currently does not allow multiple-scan files to be written with output - * suspension. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jchuff.c */ - -#ifdef C_PROGRESSIVE_SUPPORTED - -/* Expanded entropy encoder object for progressive Huffman encoding. */ - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - /* Mode flag: TRUE for optimization, FALSE for actual data output */ - boolean gather_statistics; - - /* Bit-level coding status. - * next_output_byte/free_in_buffer are local copies of cinfo->dest fields. - */ - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - JPEG_INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ - - /* Coding status for DC components */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ - - /* Coding status for AC components */ - int ac_tbl_no; /* the table number of the single component */ - unsigned int EOBRUN; /* run length of EOBs */ - unsigned int BE; /* # of buffered correction bits before MCU */ - char * bit_buffer; /* buffer for correction bits (1 per char) */ - /* packing correction bits tightly would save some space but cost time... */ - - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan). - * Since any one scan codes only DC or only AC, we only need one set - * of tables, not one for DC and one for AC. - */ - c_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - /* Statistics tables for optimization; again, one set is enough */ - long * count_ptrs[NUM_HUFF_TBLS]; -} phuff_entropy_encoder; - -typedef phuff_entropy_encoder * phuff_entropy_ptr; - -/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit - * buffer can hold. Larger sizes may slightly improve compression, but - * 1000 is already well into the realm of overkill. - * The minimum safe size is 64 bits. - */ - -#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ - -/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than JPEG_INT32. - * We assume that int right shift is unsigned if JPEG_INT32 right shift is, - * which should be safe. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS int ishift_temp; -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -/* Forward declarations */ -METHODDEF boolean encode_mcu_DC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean encode_mcu_AC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean encode_mcu_DC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean encode_mcu_AC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF void finish_pass_phuff JPP((j_compress_ptr cinfo)); -METHODDEF void finish_pass_gather_phuff JPP((j_compress_ptr cinfo)); - - -/* - * Initialize for a Huffman-compressed scan using progressive JPEG. - */ - -METHODDEF void -start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - - entropy->cinfo = cinfo; - entropy->gather_statistics = gather_statistics; - - is_DC_band = (cinfo->Ss == 0); - - /* We assume jcmaster.c already validated the scan parameters. */ - - /* Select execution routines */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_first; - else - entropy->pub.encode_mcu = encode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_refine; - else { - entropy->pub.encode_mcu = encode_mcu_AC_refine; - /* AC refinement needs a correction bit buffer */ - if (entropy->bit_buffer == NULL) - entropy->bit_buffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - MAX_CORR_BITS * SIZEOF(char)); - } - } - if (gather_statistics) - entropy->pub.finish_pass = finish_pass_gather_phuff; - else - entropy->pub.finish_pass = finish_pass_phuff; - - /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1 - * for AC coefficients. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Initialize DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - /* Make sure requested tables are present */ - /* (In gather mode, tables need not be allocated yet) */ - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - if (tbl < 0 || tbl >= NUM_HUFF_TBLS || - (cinfo->dc_huff_tbl_ptrs[tbl] == NULL && !gather_statistics)) - ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl); - } else { - entropy->ac_tbl_no = tbl = compptr->ac_tbl_no; - if (tbl < 0 || tbl >= NUM_HUFF_TBLS || - (cinfo->ac_huff_tbl_ptrs[tbl] == NULL && !gather_statistics)) - ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl); - } - if (gather_statistics) { - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->count_ptrs[tbl] == NULL) - entropy->count_ptrs[tbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long)); - } else { - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - if (is_DC_band) - jpeg_make_c_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl], - & entropy->derived_tbls[tbl]); - else - jpeg_make_c_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl], - & entropy->derived_tbls[tbl]); - } - } - - /* Initialize AC stuff */ - entropy->EOBRUN = 0; - entropy->BE = 0; - - /* Initialize bit buffer to empty */ - entropy->put_buffer = 0; - entropy->put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* Outputting bytes to the file. - * NB: these must be called only when actually outputting, - * that is, entropy->gather_statistics == FALSE. - */ - -/* Emit a byte */ -#define emit_byte(entropy,val) \ - { *(entropy)->next_output_byte++ = (JOCTET) (val); \ - if (--(entropy)->free_in_buffer == 0) \ - dump_buffer(entropy); } - - -LOCAL void -dump_buffer (phuff_entropy_ptr entropy) -/* Empty the output buffer; we do not support suspension in this module. */ -{ - struct jpeg_destination_mgr * dest = entropy->cinfo->dest; - - if (! (*dest->empty_output_buffer) (entropy->cinfo)) - ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); - /* After a successful buffer dump, must reset buffer pointers */ - entropy->next_output_byte = dest->next_output_byte; - entropy->free_in_buffer = dest->free_in_buffer; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL void -emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size) -/* Emit some bits, unless we are in gather mode */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register JPEG_INT32 put_buffer = (JPEG_INT32) code; - register int put_bits = entropy->put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - if (entropy->gather_statistics) - return; /* do nothing if we're only getting stats */ - - put_buffer &= (((JPEG_INT32) 1)<put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(entropy, c); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(entropy, 0); - } - put_buffer <<= 8; - put_bits -= 8; - } - - entropy->put_buffer = put_buffer; /* update variables */ - entropy->put_bits = put_bits; -} - - -LOCAL void -flush_bits (phuff_entropy_ptr entropy) -{ - emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */ - entropy->put_buffer = 0; /* and reset bit-buffer to empty */ - entropy->put_bits = 0; -} - - -/* - * Emit (or just count) a Huffman symbol. - */ - -INLINE -LOCAL void -emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol) -{ - if (entropy->gather_statistics) - entropy->count_ptrs[tbl_no][symbol]++; - else { - c_derived_tbl * tbl = entropy->derived_tbls[tbl_no]; - emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); - } -} - - -/* - * Emit bits from a correction bit buffer. - */ - -LOCAL void -emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart, - unsigned int nbits) -{ - if (entropy->gather_statistics) - return; /* no real work */ - - while (nbits > 0) { - emit_bits(entropy, (unsigned int) (*bufstart), 1); - bufstart++; - nbits--; - } -} - - -/* - * Emit any pending EOBRUN symbol. - */ - -LOCAL void -emit_eobrun (phuff_entropy_ptr entropy) -{ - register int temp, nbits; - - if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ - temp = entropy->EOBRUN; - nbits = 0; - while ((temp >>= 1)) - nbits++; - - emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4); - if (nbits) - emit_bits(entropy, entropy->EOBRUN, nbits); - - entropy->EOBRUN = 0; - - /* Emit any buffered correction bits */ - emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); - entropy->BE = 0; - } -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL void -emit_restart (phuff_entropy_ptr entropy, int restart_num) -{ - int ci; - - emit_eobrun(entropy); - - if (! entropy->gather_statistics) { - flush_bits(entropy); - emit_byte(entropy, 0xFF); - emit_byte(entropy, JPEG_RST0 + restart_num); - } - - if (entropy->cinfo->Ss == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) - entropy->last_dc_val[ci] = 0; - } else { - /* Re-initialize all AC-related fields to 0 */ - entropy->EOBRUN = 0; - entropy->BE = 0; - } -} - - -/* - * MCU encoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF boolean -encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - int blkn, ci; - int Al = cinfo->Al; - JBLOCKROW block; - jpeg_component_info * compptr; - ISHIFT_TEMPS - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Compute the DC value after the required point transform by Al. - * This is simply an arithmetic right shift. - */ - temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); - - /* DC differences are figured on the point-transformed values. */ - temp = temp2 - entropy->last_dc_val[ci]; - entropy->last_dc_val[ci] = temp2; - - /* Encode the DC coefficient difference per section G.1.2.1 */ - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - - /* Count/emit the Huffman-coded symbol for the number of bits */ - emit_symbol(entropy, compptr->dc_tbl_no, nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - emit_bits(entropy, (unsigned int) temp2, nbits); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF boolean -encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - register int r, k; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ - - r = 0; /* r = run length of zeros */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = (*block)[jpeg_natural_order[k]]) == 0) { - r++; - continue; - } - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value; so the code is - * interwoven with finding the abs value (temp) and output bits (temp2). - */ - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ - temp2 = ~temp; - } else { - temp >>= Al; /* apply the point transform */ - temp2 = temp; - } - /* Watch out for case that nonzero coef is zero after point transform */ - if (temp == 0) { - r++; - continue; - } - - /* Emit any pending EOBRUN */ - if (entropy->EOBRUN > 0) - emit_eobrun(entropy); - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - emit_bits(entropy, (unsigned int) temp2, nbits); - - r = 0; /* reset zero run length */ - } - - if (r > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - if (entropy->EOBRUN == 0x7FFF) - emit_eobrun(entropy); /* force it out to avoid overflow */ - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF boolean -encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - int blkn; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* We simply emit the Al'th bit of the DC coefficient value. */ - temp = (*block)[0]; - emit_bits(entropy, (unsigned int) (temp >> Al), 1); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC successive approximation refinement scan. - */ - -METHODDEF boolean -encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - register int r, k; - int EOB; - char *BR_buffer; - unsigned int BR; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - int absvalues[DCTSIZE2]; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* It is convenient to make a pre-pass to determine the transformed - * coefficients' absolute values and the EOB position. - */ - EOB = 0; - for (k = cinfo->Ss; k <= Se; k++) { - temp = (*block)[jpeg_natural_order[k]]; - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if (temp < 0) - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - absvalues[k] = temp; /* save abs value for main pass */ - if (temp == 1) - EOB = k; /* EOB = index of last newly-nonzero coef */ - } - - /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ - - r = 0; /* r = run length of zeros */ - BR = 0; /* BR = count of buffered bits added now */ - BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = absvalues[k]) == 0) { - r++; - continue; - } - - /* Emit any required ZRLs, but not if they can be folded into EOB */ - while (r > 15 && k <= EOB) { - /* emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - /* Emit ZRL */ - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - /* Emit buffered correction bits that must be associated with ZRL */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - } - - /* If the coef was previously nonzero, it only needs a correction bit. - * NOTE: a straight translation of the spec's figure G.7 would suggest - * that we also need to test r > 15. But if r > 15, we can only get here - * if k > EOB, which implies that this coefficient is not 1. - */ - if (temp > 1) { - /* The correction bit is the next bit of the absolute value. */ - BR_buffer[BR++] = (char) (temp & 1); - continue; - } - - /* Emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); - - /* Emit output bit for newly-nonzero coef */ - temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1; - emit_bits(entropy, (unsigned int) temp, 1); - - /* Emit buffered correction bits that must be associated with this code */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - r = 0; /* reset zero run length */ - } - - if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - entropy->BE += BR; /* concat my correction bits to older ones */ - /* We force out the EOB if we risk either: - * 1. overflow of the EOB counter; - * 2. overflow of the correction bit buffer during the next MCU. - */ - if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) - emit_eobrun(entropy); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed progressive scan. - */ - -METHODDEF void -finish_pass_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Flush out any buffered data */ - emit_eobrun(entropy); - flush_bits(entropy); - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF void -finish_pass_gather_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - boolean did[NUM_HUFF_TBLS]; - - /* Flush out buffered data (all we care about is counting the EOB symbol) */ - emit_eobrun(entropy); - - is_DC_band = (cinfo->Ss == 0); - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did, SIZEOF(did)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - } else { - tbl = compptr->ac_tbl_no; - } - if (! did[tbl]) { - if (is_DC_band) - htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; - else - htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]); - did[tbl] = TRUE; - } - } -} - - -/* - * Module initialization routine for progressive Huffman entropy encoding. - */ - -GLOBAL void -jinit_phuff_encoder (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_phuff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - entropy->count_ptrs[i] = NULL; - } - entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/third_party/jpeg-6/jcprepct.c b/third_party/jpeg-6/jcprepct.c deleted file mode 100644 index 7e60946..0000000 --- a/third_party/jpeg-6/jcprepct.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * jcprepct.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the compression preprocessing controller. - * This controller manages the color conversion, downsampling, - * and edge expansion steps. - * - * Most of the complexity here is associated with buffering input rows - * as required by the downsampler. See the comments at the head of - * jcsample.c for the downsampler's needs. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* At present, jcsample.c can request context rows only for smoothing. - * In the future, we might also need context rows for CCIR601 sampling - * or other more-complex downsampling procedures. The code to support - * context rows should be compiled only if needed. - */ -#ifdef INPUT_SMOOTHING_SUPPORTED -#define CONTEXT_ROWS_SUPPORTED -#endif - - -/* - * For the simple (no-context-row) case, we just need to buffer one - * row group's worth of pixels for the downsampling step. At the bottom of - * the image, we pad to a full row group by replicating the last pixel row. - * The downsampler's last output row is then replicated if needed to pad - * out to a full iMCU row. - * - * When providing context rows, we must buffer three row groups' worth of - * pixels. Three row groups are physically allocated, but the row pointer - * arrays are made five row groups high, with the extra pointers above and - * below "wrapping around" to point to the last and first real row groups. - * This allows the downsampler to access the proper context rows. - * At the top and bottom of the image, we create dummy context rows by - * copying the first or last real pixel row. This copying could be avoided - * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the - * trouble on the compression side. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_prep_controller pub; /* public fields */ - - /* Downsampling input buffer. This buffer holds color-converted data - * until we have enough to do a downsample step. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - JDIMENSION rows_to_go; /* counts rows remaining in source image */ - int next_buf_row; /* index of next row to store in color_buf */ - -#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ - int this_row_group; /* starting row index of group to process */ - int next_buf_stop; /* downsample when we reach this index */ -#endif -} my_prep_controller; - -typedef my_prep_controller * my_prep_ptr; - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - - if (pass_mode != JBUF_PASS_THRU) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Initialize total-height counter for detecting bottom of image */ - prep->rows_to_go = cinfo->image_height; - /* Mark the conversion buffer empty */ - prep->next_buf_row = 0; -#ifdef CONTEXT_ROWS_SUPPORTED - /* Preset additional state variables for context mode. - * These aren't used in non-context mode, so we needn't test which mode. - */ - prep->this_row_group = 0; - /* Set next_buf_stop to stop after two row groups have been read in. */ - prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; -#endif -} - - -/* - * Expand an image vertically from height input_rows to height output_rows, - * by duplicating the bottom row. - */ - -LOCAL void -expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, - int input_rows, int output_rows) -{ - register int row; - - for (row = input_rows; row < output_rows; row++) { - jcopy_sample_rows(image_data, input_rows-1, image_data, row, - 1, num_cols); - } -} - - -/* - * Process some data in the simple no-context case. - * - * Preprocessor output data is counted in "row groups". A row group - * is defined to be v_samp_factor sample rows of each component. - * Downsampling will produce this much data from each max_v_samp_factor - * input rows. - */ - -METHODDEF void -pre_process_data (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - JDIMENSION inrows; - jpeg_component_info * compptr; - - while (*in_row_ctr < in_rows_avail && - *out_row_group_ctr < out_row_groups_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = cinfo->max_v_samp_factor - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - /* If at bottom of image, pad to fill the conversion buffer. */ - if (prep->rows_to_go == 0 && - prep->next_buf_row < cinfo->max_v_samp_factor) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, cinfo->max_v_samp_factor); - } - prep->next_buf_row = cinfo->max_v_samp_factor; - } - /* If we've filled the conversion buffer, empty it. */ - if (prep->next_buf_row == cinfo->max_v_samp_factor) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, (JDIMENSION) 0, - output_buf, *out_row_group_ctr); - prep->next_buf_row = 0; - (*out_row_group_ctr)++; - } - /* If at bottom of image, pad the output to a full iMCU height. - * Note we assume the caller is providing a one-iMCU-height output buffer! - */ - if (prep->rows_to_go == 0 && - *out_row_group_ctr < out_row_groups_avail) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - expand_bottom_edge(output_buf[ci], - compptr->width_in_blocks * DCTSIZE, - (int) (*out_row_group_ctr * compptr->v_samp_factor), - (int) (out_row_groups_avail * compptr->v_samp_factor)); - } - *out_row_group_ctr = out_row_groups_avail; - break; /* can exit outer loop without test */ - } - } -} - - -#ifdef CONTEXT_ROWS_SUPPORTED - -/* - * Process some data in the context case. - */ - -METHODDEF void -pre_process_context (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - int buf_height = cinfo->max_v_samp_factor * 3; - JDIMENSION inrows; - jpeg_component_info * compptr; - - while (*out_row_group_ctr < out_row_groups_avail) { - if (*in_row_ctr < in_rows_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = prep->next_buf_stop - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - /* Pad at top of image, if first time through */ - if (prep->rows_to_go == cinfo->image_height) { - for (ci = 0; ci < cinfo->num_components; ci++) { - int row; - for (row = 1; row <= cinfo->max_v_samp_factor; row++) { - jcopy_sample_rows(prep->color_buf[ci], 0, - prep->color_buf[ci], -row, - 1, cinfo->image_width); - } - } - } - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - } else { - /* Return for more data, unless we are at the bottom of the image. */ - if (prep->rows_to_go != 0) - break; - } - /* If at bottom of image, pad to fill the conversion buffer. */ - if (prep->rows_to_go == 0 && - prep->next_buf_row < prep->next_buf_stop) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, prep->next_buf_stop); - } - prep->next_buf_row = prep->next_buf_stop; - } - /* If we've gotten enough data, downsample a row group. */ - if (prep->next_buf_row == prep->next_buf_stop) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, - (JDIMENSION) prep->this_row_group, - output_buf, *out_row_group_ctr); - (*out_row_group_ctr)++; - /* Advance pointers with wraparound as necessary. */ - prep->this_row_group += cinfo->max_v_samp_factor; - if (prep->this_row_group >= buf_height) - prep->this_row_group = 0; - if (prep->next_buf_row >= buf_height) - prep->next_buf_row = 0; - prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; - } - /* If at bottom of image, pad the output to a full iMCU height. - * Note we assume the caller is providing a one-iMCU-height output buffer! - */ - if (prep->rows_to_go == 0 && - *out_row_group_ctr < out_row_groups_avail) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - expand_bottom_edge(output_buf[ci], - compptr->width_in_blocks * DCTSIZE, - (int) (*out_row_group_ctr * compptr->v_samp_factor), - (int) (out_row_groups_avail * compptr->v_samp_factor)); - } - *out_row_group_ctr = out_row_groups_avail; - break; /* can exit outer loop without test */ - } - } -} - - -/* - * Create the wrapped-around downsampling input buffer needed for context mode. - */ - -LOCAL void -create_context_buffer (j_compress_ptr cinfo) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int rgroup_height = cinfo->max_v_samp_factor; - int ci, i; - jpeg_component_info * compptr; - JSAMPARRAY true_buffer, fake_buffer; - - /* Grab enough space for fake row pointers for all the components; - * we need five row groups' worth of pointers for each component. - */ - fake_buffer = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (cinfo->num_components * 5 * rgroup_height) * - SIZEOF(JSAMPROW)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate the actual buffer space (3 row groups) for this component. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - true_buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) (3 * rgroup_height)); - /* Copy true buffer row pointers into the middle of the fake row array */ - MEMCOPY(fake_buffer + rgroup_height, true_buffer, - 3 * rgroup_height * SIZEOF(JSAMPROW)); - /* Fill in the above and below wraparound pointers */ - for (i = 0; i < rgroup_height; i++) { - fake_buffer[i] = true_buffer[2 * rgroup_height + i]; - fake_buffer[4 * rgroup_height + i] = true_buffer[i]; - } - prep->color_buf[ci] = fake_buffer + rgroup_height; - fake_buffer += 5 * rgroup_height; /* point to space for next component */ - } -} - -#endif /* CONTEXT_ROWS_SUPPORTED */ - - -/* - * Initialize preprocessing controller. - */ - -GLOBAL void -jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_prep_ptr prep; - int ci; - jpeg_component_info * compptr; - - if (need_full_buffer) /* safety check */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - prep = (my_prep_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_prep_controller)); - cinfo->prep = (struct jpeg_c_prep_controller *) prep; - prep->pub.start_pass = start_pass_prep; - - /* Allocate the color conversion buffer. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - if (cinfo->downsample->need_context_rows) { - /* Set up to provide context rows */ -#ifdef CONTEXT_ROWS_SUPPORTED - prep->pub.pre_process_data = pre_process_context; - create_context_buffer(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* No context, just make it tall enough for one row group */ - prep->pub.pre_process_data = pre_process_data; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/third_party/jpeg-6/jcsample.c b/third_party/jpeg-6/jcsample.c deleted file mode 100644 index 14e8366..0000000 --- a/third_party/jpeg-6/jcsample.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * jcsample.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains downsampling routines. - * - * Downsampling input data is counted in "row groups". A row group - * is defined to be max_v_samp_factor pixel rows of each component, - * from which the downsampler produces v_samp_factor sample rows. - * A single row group is processed in each call to the downsampler module. - * - * The downsampler is responsible for edge-expansion of its output data - * to fill an integral number of DCT blocks horizontally. The source buffer - * may be modified if it is helpful for this purpose (the source buffer is - * allocated wide enough to correspond to the desired output width). - * The caller (the prep controller) is responsible for vertical padding. - * - * The downsampler may request "context rows" by setting need_context_rows - * during startup. In this case, the input arrays will contain at least - * one row group's worth of pixels above and below the passed-in data; - * the caller will create dummy rows at image top and bottom by replicating - * the first or last real pixel row. - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - * - * The downsampling algorithm used here is a simple average of the source - * pixels covered by the output pixel. The hi-falutin sampling literature - * refers to this as a "box filter". In general the characteristics of a box - * filter are not very good, but for the specific cases we normally use (1:1 - * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not - * nearly so bad. If you intend to use other sampling ratios, you'd be well - * advised to improve this code. - * - * A simple input-smoothing capability is provided. This is mainly intended - * for cleaning up color-dithered GIF input files (if you find it inadequate, - * we suggest using an external filtering program such as pnmconvol). When - * enabled, each input pixel P is replaced by a weighted sum of itself and its - * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, - * where SF = (smoothing_factor / 1024). - * Currently, smoothing is only supported for 2h2v sampling factors. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to downsample a single component */ -typedef JMETHOD(void, downsample1_ptr, - (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data)); - -/* Private subobject */ - -typedef struct { - struct jpeg_downsampler pub; /* public fields */ - - /* Downsampling method pointers, one per component */ - downsample1_ptr methods[MAX_COMPONENTS]; -} my_downsampler; - -typedef my_downsampler * my_downsample_ptr; - - -/* - * Initialize for a downsampling pass. - */ - -METHODDEF void -start_pass_downsample (j_compress_ptr cinfo) -{ - /* no work for now */ -} - - -/* - * Expand a component horizontally from width input_cols to width output_cols, - * by duplicating the rightmost samples. - */ - -LOCAL void -expand_right_edge (JSAMPARRAY image_data, int num_rows, - JDIMENSION input_cols, JDIMENSION output_cols) -{ - register JSAMPROW ptr; - register JSAMPLE pixval; - register int count; - int row; - int numcols = (int) (output_cols - input_cols); - - if (numcols > 0) { - for (row = 0; row < num_rows; row++) { - ptr = image_data[row] + input_cols; - pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ - for (count = numcols; count > 0; count--) - *ptr++ = pixval; - } - } -} - - -/* - * Do downsampling for a whole row group (all components). - * - * In this version we simply downsample each component independently. - */ - -METHODDEF void -sep_downsample (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) -{ - my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; - int ci; - jpeg_component_info * compptr; - JSAMPARRAY in_ptr, out_ptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - in_ptr = input_buf[ci] + in_row_index; - out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor); - (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); - } -} - - -/* - * Downsample pixel values of a single component. - * One row group is processed per call. - * This version handles arbitrary integral sampling ratios, without smoothing. - * Note that this version is not actually used for customary sampling ratios. - */ - -METHODDEF void -int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; - JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - JSAMPROW inptr, outptr; - JPEG_INT32 outvalue; - - h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor; - v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor; - numpix = h_expand * v_expand; - numpix2 = numpix/2; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * h_expand); - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - for (outcol = 0, outcol_h = 0; outcol < output_cols; - outcol++, outcol_h += h_expand) { - outvalue = 0; - for (v = 0; v < v_expand; v++) { - inptr = input_data[inrow+v] + outcol_h; - for (h = 0; h < h_expand; h++) { - outvalue += (JPEG_INT32) GETJSAMPLE(*inptr++); - } - } - *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); - } - inrow += v_expand; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * without smoothing. - */ - -METHODDEF void -fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - /* Copy the data */ - jcopy_sample_rows(input_data, 0, output_data, 0, - cinfo->max_v_samp_factor, cinfo->image_width); - /* Edge-expand */ - expand_right_edge(output_data, cinfo->max_v_samp_factor, - cinfo->image_width, compptr->width_in_blocks * DCTSIZE); -} - - -/* - * Downsample pixel values of a single component. - * This version handles the common case of 2:1 horizontal and 1:1 vertical, - * without smoothing. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF void -h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int outrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; - bias = 0; /* bias = 0,1,0,1,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) - + bias) >> 1); - bias ^= 1; /* 0=>1, 1=>0 */ - inptr += 2; - } - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * without smoothing. - */ - -METHODDEF void -h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr0, inptr1, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - bias = 1; /* bias = 1,2,1,2,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) - + bias) >> 2); - bias ^= 3; /* 1=>2, 2=>1 */ - inptr0 += 2; inptr1 += 2; - } - inrow += 2; - } -} - - -#ifdef INPUT_SMOOTHING_SUPPORTED - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * with smoothing. One row of context is required. - */ - -METHODDEF void -h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; - JPEG_INT32 membersum, neighsum, memberscale, neighscale; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols * 2); - - /* We don't bother to form the individual "smoothed" input pixel values; - * we can directly compute the output which is the average of the four - * smoothed values. Each of the four member pixels contributes a fraction - * (1-8*SF) to its own smoothed image and a fraction SF to each of the three - * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final - * output. The four corner-adjacent neighbor pixels contribute a fraction - * SF to just one smoothed pixel, or SF/4 to the final output; while the - * eight edge-adjacent neighbors contribute SF to each of two smoothed - * pixels, or SF/2 overall. In order to use integer arithmetic, these - * factors are scaled by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ - neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - above_ptr = input_data[inrow-1]; - below_ptr = input_data[inrow+2]; - - /* Special case for first column: pretend column -1 is same as column 0 */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); - neighsum += neighsum; - neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - /* sum of pixels directly mapped to this output element */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - /* sum of edge-neighbor pixels */ - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); - /* The edge-neighbors count twice as much as corner-neighbors */ - neighsum += neighsum; - /* Add in the corner-neighbors */ - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); - /* form final output scaled up by 2^16 */ - membersum = membersum * memberscale + neighsum * neighscale; - /* round, descale and output it */ - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); - neighsum += neighsum; - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - inrow += 2; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * with smoothing. One row of context is required. - */ - -METHODDEF void -fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int outrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr, above_ptr, below_ptr, outptr; - JPEG_INT32 membersum, neighsum, memberscale, neighscale; - int colsum, lastcolsum, nextcolsum; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols); - - /* Each of the eight neighbor pixels contributes a fraction SF to the - * smoothed pixel, while the main pixel contributes (1-8*SF). In order - * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ - neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ - - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; - above_ptr = input_data[outrow-1]; - below_ptr = input_data[outrow+1]; - - /* Special case for first column */ - colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + - GETJSAMPLE(*inptr); - membersum = GETJSAMPLE(*inptr++); - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = colsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - membersum = GETJSAMPLE(*inptr++); - above_ptr++; below_ptr++; - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + colsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - } -} - -#endif /* INPUT_SMOOTHING_SUPPORTED */ - - -/* - * Module initialization routine for downsampling. - * Note that we must select a routine for each component. - */ - -GLOBAL void -jinit_downsampler (j_compress_ptr cinfo) -{ - my_downsample_ptr downsample; - int ci; - jpeg_component_info * compptr; - boolean smoothok = TRUE; - - downsample = (my_downsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_downsampler)); - cinfo->downsample = (struct jpeg_downsampler *) downsample; - downsample->pub.start_pass = start_pass_downsample; - downsample->pub.downsample = sep_downsample; - downsample->pub.need_context_rows = FALSE; - - if (cinfo->CCIR601_sampling) - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* Verify we can handle the sampling factors, and set up method pointers */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = fullsize_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = fullsize_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { - smoothok = FALSE; - downsample->methods[ci] = h2v1_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = h2v2_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = h2v2_downsample; - } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 && - (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) { - smoothok = FALSE; - downsample->methods[ci] = int_downsample; - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - } - -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor && !smoothok) - TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); -#endif -} diff --git a/third_party/jpeg-6/jctrans.c b/third_party/jpeg-6/jctrans.c deleted file mode 100644 index 8fc53b1..0000000 --- a/third_party/jpeg-6/jctrans.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * jctrans.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding compression, - * that is, writing raw DCT coefficient arrays to an output JPEG file. - * The routines in jcapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL void transencode_master_selection - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); -LOCAL void transencode_coef_controller - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); - - -/* - * Compression initialization for writing raw-coefficient data. - * Before calling this, all parameters and a data destination must be set up. - * Call jpeg_finish_compress() to actually write the data. - * - * The number of passed virtual arrays must match cinfo->num_components. - * Note that the virtual arrays need not be filled or even realized at - * the time write_coefficients is called; indeed, if the virtual arrays - * were requested from this compression object's memory manager, they - * typically will be realized during this routine and filled afterwards. - */ - -GLOBAL void -jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Mark all tables to be written */ - jpeg_suppress_tables(cinfo, FALSE); - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - transencode_master_selection(cinfo, coef_arrays); - /* Wait for jpeg_finish_compress() call */ - cinfo->next_scanline = 0; /* so jpeg_write_marker works */ - cinfo->global_state = CSTATE_WRCOEFS; -} - - -/* - * Initialize the compression object with default parameters, - * then copy from the source object all parameters needed for lossless - * transcoding. Parameters that can be varied without loss (such as - * scan script and Huffman optimization) are left in their default states. - */ - -GLOBAL void -jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo) -{ - JQUANT_TBL ** qtblptr; - jpeg_component_info *incomp, *outcomp; - JQUANT_TBL *c_quant, *slot_quant; - int tblno, ci, coefi; - - /* Safety check to ensure start_compress not called yet. */ - if (dstinfo->global_state != CSTATE_START) - ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); - /* Copy fundamental image dimensions */ - dstinfo->image_width = srcinfo->image_width; - dstinfo->image_height = srcinfo->image_height; - dstinfo->input_components = srcinfo->num_components; - dstinfo->in_color_space = srcinfo->jpeg_color_space; - /* Initialize all parameters to default values */ - jpeg_set_defaults(dstinfo); - /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. - * Fix it to get the right header markers for the image colorspace. - */ - jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); - dstinfo->data_precision = srcinfo->data_precision; - dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; - /* Copy the source's quantization tables. */ - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { - qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); - MEMCOPY((*qtblptr)->quantval, - srcinfo->quant_tbl_ptrs[tblno]->quantval, - SIZEOF((*qtblptr)->quantval)); - (*qtblptr)->sent_table = FALSE; - } - } - /* Copy the source's per-component info. - * Note we assume jpeg_set_defaults has allocated the dest comp_info array. - */ - dstinfo->num_components = srcinfo->num_components; - if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) - ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, - MAX_COMPONENTS); - for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; - ci < dstinfo->num_components; ci++, incomp++, outcomp++) { - outcomp->component_id = incomp->component_id; - outcomp->h_samp_factor = incomp->h_samp_factor; - outcomp->v_samp_factor = incomp->v_samp_factor; - outcomp->quant_tbl_no = incomp->quant_tbl_no; - /* Make sure saved quantization table for component matches the qtable - * slot. If not, the input file re-used this qtable slot. - * IJG encoder currently cannot duplicate this. - */ - tblno = outcomp->quant_tbl_no; - if (tblno < 0 || tblno >= NUM_QUANT_TBLS || - srcinfo->quant_tbl_ptrs[tblno] == NULL) - ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); - slot_quant = srcinfo->quant_tbl_ptrs[tblno]; - c_quant = incomp->quant_table; - if (c_quant != NULL) { - for (coefi = 0; coefi < DCTSIZE2; coefi++) { - if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) - ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); - } - } - /* Note: we do not copy the source's Huffman table assignments; - * instead we rely on jpeg_set_colorspace to have made a suitable choice. - */ - } -} - - -/* - * Master selection of compression modules for transcoding. - * This substitutes for jcinit.c's initialization of the full compressor. - */ - -LOCAL void -transencode_master_selection (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - /* Although we don't actually use input_components for transcoding, - * jcmaster.c's initial_setup will complain if input_components is 0. - */ - cinfo->input_components = 1; - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, TRUE /* transcode only */); - - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); - } - - /* We need a special coefficient buffer controller. */ - transencode_coef_controller(cinfo, coef_arrays); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} - - -/* - * The rest of this file is a special implementation of the coefficient - * buffer controller. This is similar to jccoefct.c, but it handles only - * output from presupplied virtual arrays. Furthermore, we generate any - * dummy padding blocks on-the-fly rather than expecting them to be present - * in the arrays. - */ - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* Virtual block array for each component. */ - jvirt_barray_ptr * whole_image; - - /* Workspace for constructing dummy blocks at right/bottom edges. */ - JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -LOCAL void -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - if (pass_mode != JBUF_CRANK_DEST) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); -} - - -/* - * Process some data. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF boolean -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, blockcnt; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yindex+yoffset < compptr->last_row_height) { - /* Fill in pointers to real blocks in this row */ - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < blockcnt; xindex++) - MCU_buffer[blkn++] = buffer_ptr++; - } else { - /* At bottom of image, need a whole row of dummy blocks */ - xindex = 0; - } - /* Fill in any dummy blocks needed in this row. - * Dummy blocks are filled in the same way as in jccoefct.c: - * all zeroes in the AC entries, DC entries equal to previous - * block's DC value. The init routine has already zeroed the - * AC entries, so we need only set the DC entries correctly. - */ - for (; xindex < compptr->MCU_width; xindex++) { - MCU_buffer[blkn] = coef->dummy_buffer[blkn]; - MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; - blkn++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - - -/* - * Initialize coefficient buffer controller. - * - * Each passed coefficient array must be the right size for that - * coefficient: width_in_blocks wide and height_in_blocks high, - * with unitheight at least v_samp_factor. - */ - -LOCAL void -transencode_coef_controller (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - my_coef_ptr coef; - JBLOCKROW buffer; - int i; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - coef->pub.compress_data = compress_output; - - /* Save pointer to virtual arrays */ - coef->whole_image = coef_arrays; - - /* Allocate and pre-zero space for dummy DCT blocks. */ - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->dummy_buffer[i] = buffer + i; - } -} diff --git a/third_party/jpeg-6/jdapimin.c b/third_party/jpeg-6/jdapimin.c deleted file mode 100644 index d568187..0000000 --- a/third_party/jpeg-6/jdapimin.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * jdapimin.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-decompression case or the - * transcoding-only case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jdapistd.c. But also see jcomapi.c for routines - * shared by compression and decompression, and jdtrans.c for the transcoding - * case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG decompression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL void -jpeg_create_decompress (j_decompress_ptr cinfo) -{ - int i; - - /* For debugging purposes, zero the whole master structure. - * But error manager pointer is already there, so save and restore it. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); - cinfo->err = err; - } - cinfo->is_decompressor = TRUE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->src = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - /* Initialize marker processor so application can override methods - * for COM, APPn markers before calling jpeg_read_header. - */ - jinit_marker_reader(cinfo); - - /* And initialize the overall input controller. */ - jinit_input_controller(cinfo); - - /* OK, I'm ready */ - cinfo->global_state = DSTATE_START; -} - - -/* - * Destruction of a JPEG decompression object - */ - -GLOBAL void -jpeg_destroy_decompress (j_decompress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG decompression operation, - * but don't destroy the object itself. - */ - -GLOBAL void -jpeg_abort_decompress (j_decompress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Install a special processing method for COM or APPn markers. - */ - -GLOBAL void -jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine) -{ - if (marker_code == JPEG_COM) - cinfo->marker->process_COM = routine; - else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15) - cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine; - else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} - - -/* - * Set default decompression parameters. - */ - -LOCAL void -default_decompress_parms (j_decompress_ptr cinfo) -{ - /* Guess the input colorspace, and set output colorspace accordingly. */ - /* (Wish JPEG committee had provided a real way to specify this...) */ - /* Note application may override our guesses. */ - switch (cinfo->num_components) { - case 1: - cinfo->jpeg_color_space = JCS_GRAYSCALE; - cinfo->out_color_space = JCS_GRAYSCALE; - break; - - case 3: - if (cinfo->saw_JFIF_marker) { - cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ - } else if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_RGB; - break; - case 1: - cinfo->jpeg_color_space = JCS_YCbCr; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - break; - } - } else { - /* Saw no special markers, try to guess from the component IDs */ - int cid0 = cinfo->comp_info[0].component_id; - int cid1 = cinfo->comp_info[1].component_id; - int cid2 = cinfo->comp_info[2].component_id; - - if (cid0 == 1 && cid1 == 2 && cid2 == 3) - cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ - else if (cid0 == 82 && cid1 == 71 && cid2 == 66) - cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ - else { - TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - } - } - /* Always guess RGB is proper output colorspace. */ - cinfo->out_color_space = JCS_RGB; - break; - - case 4: - if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_CMYK; - break; - case 2: - cinfo->jpeg_color_space = JCS_YCCK; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ - break; - } - } else { - /* No special markers, assume straight CMYK. */ - cinfo->jpeg_color_space = JCS_CMYK; - } - cinfo->out_color_space = JCS_CMYK; - break; - - default: - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->out_color_space = JCS_UNKNOWN; - break; - } - - /* Set defaults for other decompression parameters. */ - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; - cinfo->output_gamma = 1.0; - cinfo->buffered_image = FALSE; - cinfo->raw_data_out = FALSE; - cinfo->dct_method = JDCT_DEFAULT; - cinfo->do_fancy_upsampling = TRUE; - cinfo->do_block_smoothing = TRUE; - cinfo->quantize_colors = FALSE; - /* We set these in case application only sets quantize_colors. */ - cinfo->dither_mode = JDITHER_FS; -#ifdef QUANT_2PASS_SUPPORTED - cinfo->two_pass_quantize = TRUE; -#else - cinfo->two_pass_quantize = FALSE; -#endif - cinfo->desired_number_of_colors = 256; - cinfo->colormap = NULL; - /* Initialize for no mode change in buffered-image mode. */ - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; -} - - -/* - * Decompression startup: read start of JPEG datastream to see what's there. - * Need only initialize JPEG object and supply a data source before calling. - * - * This routine will read as far as the first SOS marker (ie, actual start of - * compressed data), and will save all tables and parameters in the JPEG - * object. It will also initialize the decompression parameters to default - * values, and finally return JPEG_HEADER_OK. On return, the application may - * adjust the decompression parameters and then call jpeg_start_decompress. - * (Or, if the application only wanted to determine the image parameters, - * the data need not be decompressed. In that case, call jpeg_abort or - * jpeg_destroy to release any temporary space.) - * If an abbreviated (tables only) datastream is presented, the routine will - * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then - * re-use the JPEG object to read the abbreviated image datastream(s). - * It is unnecessary (but OK) to call jpeg_abort in this case. - * The JPEG_SUSPENDED return code only occurs if the data source module - * requests suspension of the decompressor. In this case the application - * should load more source data and then re-call jpeg_read_header to resume - * processing. - * If a non-suspending data source is used and require_image is TRUE, then the - * return code need not be inspected since only JPEG_HEADER_OK is possible. - * - * This routine is now just a front end to jpeg_consume_input, with some - * extra error checking. - */ - -GLOBAL int -jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) -{ - int retcode; - - if (cinfo->global_state != DSTATE_START && - cinfo->global_state != DSTATE_INHEADER) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - retcode = jpeg_consume_input(cinfo); - - switch (retcode) { - case JPEG_REACHED_SOS: - retcode = JPEG_HEADER_OK; - break; - case JPEG_REACHED_EOI: - if (require_image) /* Complain if application wanted an image */ - ERREXIT(cinfo, JERR_NO_IMAGE); - /* Reset to start state; it would be safer to require the application to - * call jpeg_abort, but we can't change it now for compatibility reasons. - * A side effect is to free any temporary memory (there shouldn't be any). - */ - jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ - retcode = JPEG_HEADER_TABLES_ONLY; - break; - case JPEG_SUSPENDED: - /* no work */ - break; - } - - return retcode; -} - - -/* - * Consume data in advance of what the decompressor requires. - * This can be called at any time once the decompressor object has - * been created and a data source has been set up. - * - * This routine is essentially a state machine that handles a couple - * of critical state-transition actions, namely initial setup and - * transition from header scanning to ready-for-start_decompress. - * All the actual input is done via the input controller's consume_input - * method. - */ - -GLOBAL int -jpeg_consume_input (j_decompress_ptr cinfo) -{ - int retcode = JPEG_SUSPENDED; - - /* NB: every possible DSTATE value should be listed in this switch */ - switch (cinfo->global_state) { - case DSTATE_START: - /* Start-of-datastream actions: reset appropriate modules */ - (*cinfo->inputctl->reset_input_controller) (cinfo); - /* Initialize application's data source module */ - (*cinfo->src->init_source) (cinfo); - cinfo->global_state = DSTATE_INHEADER; - /*FALLTHROUGH*/ - case DSTATE_INHEADER: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ - /* Set up default parameters based on header data */ - default_decompress_parms(cinfo); - /* Set global state: ready for start_decompress */ - cinfo->global_state = DSTATE_READY; - } - break; - case DSTATE_READY: - /* Can't advance past first SOS until start_decompress is called */ - retcode = JPEG_REACHED_SOS; - break; - case DSTATE_PRELOAD: - case DSTATE_PRESCAN: - case DSTATE_SCANNING: - case DSTATE_RAW_OK: - case DSTATE_BUFIMAGE: - case DSTATE_BUFPOST: - case DSTATE_STOPPING: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - break; - default: - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - return retcode; -} - - -/* - * Have we finished reading the input file? - */ - -GLOBAL boolean -jpeg_input_complete (j_decompress_ptr cinfo) -{ - /* Check for valid jpeg object */ - if (cinfo->global_state < DSTATE_START || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->eoi_reached; -} - - -/* - * Is there more than one scan? - */ - -GLOBAL boolean -jpeg_has_multiple_scans (j_decompress_ptr cinfo) -{ - /* Only valid after jpeg_read_header completes */ - if (cinfo->global_state < DSTATE_READY || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->has_multiple_scans; -} - - -/* - * Finish JPEG decompression. - * - * This will normally just verify the file trailer and release temp storage. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_finish_decompress (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { - /* Terminate final pass of non-buffered mode */ - if (cinfo->output_scanline < cinfo->output_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state == DSTATE_BUFIMAGE) { - /* Finishing after a buffered-image operation */ - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state != DSTATE_STOPPING) { - /* STOPPING = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read until EOI */ - while (! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - /* Do final cleanup */ - (*cinfo->src->term_source) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); - return TRUE; -} diff --git a/third_party/jpeg-6/jdapistd.c b/third_party/jpeg-6/jdapistd.c deleted file mode 100644 index e36f25c..0000000 --- a/third_party/jpeg-6/jdapistd.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * jdapistd.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-decompression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_decompress, it will end up linking in the entire decompressor. - * We thus must separate this file from jdapimin.c to avoid linking the - * whole decompression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL boolean output_pass_setup JPP((j_decompress_ptr cinfo)); - - -/* - * Decompression initialization. - * jpeg_read_header must be completed before calling this. - * - * If a multipass operating mode was selected, this will do all but the - * last pass, and thus may take a great deal of time. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_start_decompress (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize master control, select active modules */ - jinit_master_decompress(cinfo); - if (cinfo->buffered_image) { - /* No more work here; expecting jpeg_start_output next */ - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; - } - cinfo->global_state = DSTATE_PRELOAD; - } - if (cinfo->global_state == DSTATE_PRELOAD) { - /* If file has multiple scans, absorb them all into the coef buffer */ - if (cinfo->inputctl->has_multiple_scans) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* jdmaster underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - } - cinfo->output_scan_number = cinfo->input_scan_number; - } else if (cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any dummy output passes, and set up for the final pass */ - return output_pass_setup(cinfo); -} - - -/* - * Set up for an output pass, and perform any dummy pass(es) needed. - * Common subroutine for jpeg_start_decompress and jpeg_start_output. - * Entry: global_state = DSTATE_PRESCAN only if previously suspended. - * Exit: If done, returns TRUE and sets global_state for proper output mode. - * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. - */ - -LOCAL boolean -output_pass_setup (j_decompress_ptr cinfo) -{ - if (cinfo->global_state != DSTATE_PRESCAN) { - /* First call: do pass setup */ - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; - cinfo->global_state = DSTATE_PRESCAN; - } - /* Loop over any required dummy passes */ - while (cinfo->master->is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Crank through the dummy pass */ - while (cinfo->output_scanline < cinfo->output_height) { - JDIMENSION last_scanline; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* Process some data */ - last_scanline = cinfo->output_scanline; - (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, - &cinfo->output_scanline, (JDIMENSION) 0); - if (cinfo->output_scanline == last_scanline) - return FALSE; /* No progress made, must suspend */ - } - /* Finish up dummy pass, and set up for another one */ - (*cinfo->master->finish_output_pass) (cinfo); - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } - /* Ready for application to drive output pass through - * jpeg_read_scanlines or jpeg_read_raw_data. - */ - cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; - return TRUE; -} - - -/* - * Read some scanlines of data from the JPEG decompressor. - * - * The return value will be the number of lines actually read. - * This may be less than the number requested in several cases, - * including bottom of image, data source suspension, and operating - * modes that emit multiple scanlines at a time. - * - * Note: we warn about excess calls to jpeg_read_scanlines() since - * this likely signals an application programmer error. However, - * an oversize buffer (max_lines > scanlines remaining) is not an error. - */ - -GLOBAL JDIMENSION -jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION max_lines) -{ - JDIMENSION row_ctr; - - if (cinfo->global_state != DSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Process some data */ - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); - cinfo->output_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to read raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL JDIMENSION -jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION max_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != DSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Verify that at least one iMCU row can be returned. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; - if (max_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Decompress directly into user's buffer. */ - if (! (*cinfo->coef->decompress_data) (cinfo, data)) - return 0; /* suspension forced, can do nothing more */ - - /* OK, we processed one iMCU row. */ - cinfo->output_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} - - -/* Additional entry points for buffered-image mode. */ - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Initialize for an output pass in buffered-image mode. - */ - -GLOBAL boolean -jpeg_start_output (j_decompress_ptr cinfo, int scan_number) -{ - if (cinfo->global_state != DSTATE_BUFIMAGE && - cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Limit scan number to valid range */ - if (scan_number <= 0) - scan_number = 1; - if (cinfo->inputctl->eoi_reached && - scan_number > cinfo->input_scan_number) - scan_number = cinfo->input_scan_number; - cinfo->output_scan_number = scan_number; - /* Perform any dummy output passes, and set up for the real pass */ - return output_pass_setup(cinfo); -} - - -/* - * Finish up after an output pass in buffered-image mode. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL boolean -jpeg_finish_output (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { - /* Terminate this pass. */ - /* We do not require the whole pass to have been completed. */ - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_BUFPOST; - } else if (cinfo->global_state != DSTATE_BUFPOST) { - /* BUFPOST = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read markers looking for SOS or EOI */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/third_party/jpeg-6/jdatadst.c b/third_party/jpeg-6/jdatadst.c deleted file mode 100644 index 08c4daf..0000000 --- a/third_party/jpeg-6/jdatadst.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * jdatadst.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains compression data destination routines for the case of - * emitting JPEG data to a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * destination manager. - * IMPORTANT: we assume that fwrite() will correctly transcribe an array of - * JOCTETs into 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data destination object for stdio output */ - -typedef struct { - struct jpeg_destination_mgr pub; /* public fields */ - - FILE * outfile; /* target stream */ - JOCTET * buffer; /* start of buffer */ -} my_destination_mgr; - -typedef my_destination_mgr * my_dest_ptr; - -#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ - - -/* - * Initialize destination --- called by jpeg_start_compress - * before any data is actually written. - */ - -METHODDEF void -init_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - /* Allocate the output buffer --- it will be released when done with image */ - dest->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; -} - - -/* - * Empty the output buffer --- called whenever buffer fills up. - * - * In typical applications, this should write the entire output buffer - * (ignoring the current state of next_output_byte & free_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been dumped. - * - * In applications that need to be able to suspend compression due to output - * overrun, a FALSE return indicates that the buffer cannot be emptied now. - * In this situation, the compressor will return to its caller (possibly with - * an indication that it has not accepted all the supplied scanlines). The - * application should resume compression after it has made more room in the - * output buffer. Note that there are substantial restrictions on the use of - * suspension --- see the documentation. - * - * When suspending, the compressor will back up to a convenient restart point - * (typically the start of the current MCU). next_output_byte & free_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point will be regenerated after resumption, so do not - * write it out when emptying the buffer externally. - */ - -METHODDEF boolean -empty_output_buffer (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != - (size_t) OUTPUT_BUF_SIZE) - ERREXIT(cinfo, JERR_FILE_WRITE); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; - - return TRUE; -} - - -/* - * Terminate destination --- called by jpeg_finish_compress - * after all data has been written. Usually needs to flush buffer. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF void -term_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; - - /* Write any data remaining in the buffer */ - if (datacount > 0) { - if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) - ERREXIT(cinfo, JERR_FILE_WRITE); - } - fflush(dest->outfile); - /* Make sure we wrote the output file OK */ - if (ferror(dest->outfile)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * Prepare for output to a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing compression. - */ - -GLOBAL void -jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) -{ - my_dest_ptr dest; - - /* The destination object is made permanent so that multiple JPEG images - * can be written to the same file without re-executing jpeg_stdio_dest. - * This makes it dangerous to use this manager and a different destination - * manager serially with the same JPEG object, because their private object - * sizes may be different. Caveat programmer. - */ - if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_destination_mgr)); - } - - dest = (my_dest_ptr) cinfo->dest; - dest->pub.init_destination = init_destination; - dest->pub.empty_output_buffer = empty_output_buffer; - dest->pub.term_destination = term_destination; - dest->outfile = outfile; -} diff --git a/third_party/jpeg-6/jdatasrc.c b/third_party/jpeg-6/jdatasrc.c deleted file mode 100644 index 0bf7866..0000000 --- a/third_party/jpeg-6/jdatasrc.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * jdatasrc.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains decompression data source routines for the case of - * reading JPEG data from a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * source manager. - * IMPORTANT: we assume that fread() will correctly transcribe an array of - * JOCTETs from 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data source object for stdio input */ - -typedef struct { - struct jpeg_source_mgr pub; /* public fields */ - - unsigned char *infile; /* source stream */ - JOCTET * buffer; /* start of buffer */ - boolean start_of_file; /* have we gotten any data yet? */ -} my_source_mgr; - -typedef my_source_mgr * my_src_ptr; - -#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ - - -/* - * Initialize source --- called by jpeg_read_header - * before any data is actually read. - */ - -METHODDEF void -init_source (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* We reset the empty-input-file flag for each image, - * but we don't clear the input buffer. - * This is correct behavior for reading a series of images from one source. - */ - src->start_of_file = TRUE; -} - - -/* - * Fill the input buffer --- called whenever buffer is emptied. - * - * In typical applications, this should read fresh data into the buffer - * (ignoring the current state of next_input_byte & bytes_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been reloaded. It is not necessary to - * fill the buffer entirely, only to obtain at least one more byte. - * - * There is no such thing as an EOF return. If the end of the file has been - * reached, the routine has a choice of ERREXIT() or inserting fake data into - * the buffer. In most cases, generating a warning message and inserting a - * fake EOI marker is the best course of action --- this will allow the - * decompressor to output however much of the image is there. However, - * the resulting error message is misleading if the real problem is an empty - * input file, so we handle that case specially. - * - * In applications that need to be able to suspend compression due to input - * not being available yet, a FALSE return indicates that no more data can be - * obtained right now, but more may be forthcoming later. In this situation, - * the decompressor will return to its caller (with an indication of the - * number of scanlines it has read, if any). The application should resume - * decompression after it has loaded more data into the input buffer. Note - * that there are substantial restrictions on the use of suspension --- see - * the documentation. - * - * When suspending, the decompressor will back up to a convenient restart point - * (typically the start of the current MCU). next_input_byte & bytes_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point must be rescanned after resumption, so move it to - * the front of the buffer rather than discarding it. - */ - -METHODDEF boolean -fill_input_buffer (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - memcpy( src->buffer, src->infile, INPUT_BUF_SIZE ); - - src->infile += INPUT_BUF_SIZE; - - src->pub.next_input_byte = src->buffer; - src->pub.bytes_in_buffer = INPUT_BUF_SIZE; - src->start_of_file = FALSE; - - return TRUE; -} - - -/* - * Skip data --- used to skip over a potentially large amount of - * uninteresting data (such as an APPn marker). - * - * Writers of suspendable-input applications must note that skip_input_data - * is not granted the right to give a suspension return. If the skip extends - * beyond the data currently in the buffer, the buffer can be marked empty so - * that the next read will cause a fill_input_buffer call that can suspend. - * Arranging for additional bytes to be discarded before reloading the input - * buffer is the application writer's problem. - */ - -METHODDEF void -skip_input_data (j_decompress_ptr cinfo, long num_bytes) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* Just a dumb implementation for now. Could use fseek() except - * it doesn't work on pipes. Not clear that being smart is worth - * any trouble anyway --- large skips are infrequent. - */ - if (num_bytes > 0) { - while (num_bytes > (long) src->pub.bytes_in_buffer) { - num_bytes -= (long) src->pub.bytes_in_buffer; - (void) fill_input_buffer(cinfo); - /* note we assume that fill_input_buffer will never return FALSE, - * so suspension need not be handled. - */ - } - src->pub.next_input_byte += (size_t) num_bytes; - src->pub.bytes_in_buffer -= (size_t) num_bytes; - } -} - - -/* - * An additional method that can be provided by data source modules is the - * resync_to_restart method for error recovery in the presence of RST markers. - * For the moment, this source module just uses the default resync method - * provided by the JPEG library. That method assumes that no backtracking - * is possible. - */ - - -/* - * Terminate source --- called by jpeg_finish_decompress - * after all data has been read. Often a no-op. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF void -term_source (j_decompress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Prepare for input from a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing decompression. - */ - -GLOBAL void -jpeg_stdio_src (j_decompress_ptr cinfo, unsigned char *infile) -{ - my_src_ptr src; - - /* The source object and input buffer are made permanent so that a series - * of JPEG images can be read from the same file by calling jpeg_stdio_src - * only before the first one. (If we discarded the buffer at the end of - * one image, we'd likely lose the start of the next one.) - * This makes it unsafe to use this manager and a different source - * manager serially with the same JPEG object. Caveat programmer. - */ - if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_source_mgr)); - src = (my_src_ptr) cinfo->src; - src->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - INPUT_BUF_SIZE * SIZEOF(JOCTET)); - } - - src = (my_src_ptr) cinfo->src; - src->pub.init_source = init_source; - src->pub.fill_input_buffer = fill_input_buffer; - src->pub.skip_input_data = skip_input_data; - src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ - src->pub.term_source = term_source; - src->infile = infile; - src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ - src->pub.next_input_byte = NULL; /* until buffer loaded */ -} diff --git a/third_party/jpeg-6/jdcoefct.c b/third_party/jpeg-6/jdcoefct.c deleted file mode 100644 index 5de5c45..0000000 --- a/third_party/jpeg-6/jdcoefct.c +++ /dev/null @@ -1,725 +0,0 @@ -/* - * jdcoefct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for decompression. - * This controller is the top level of the JPEG decompressor proper. - * The coefficient buffer lies between entropy decoding and inverse-DCT steps. - * - * In buffered-image mode, this controller is the interface between - * input-oriented processing and output-oriented processing. - * Also, the input side (only) is used when reading a file for transcoding. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Block smoothing is only applicable for progressive JPEG, so: */ -#ifndef D_PROGRESSIVE_SUPPORTED -#undef BLOCK_SMOOTHING_SUPPORTED -#endif - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_coef_controller pub; /* public fields */ - - /* These variables keep track of the current location of the input side. */ - /* cinfo->input_iMCU_row is also used for this. */ - JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* The output side's location is represented by cinfo->output_iMCU_row. */ - - /* In single-pass modes, it's sufficient to buffer just one MCU. - * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, - * and let the entropy decoder write into that workspace each time. - * (On 80x86, the workspace is FAR even though it's not really very big; - * this is to keep the module interfaces unchanged when a large coefficient - * buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays; it is used only by the input side. - */ - JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -#endif - -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* When doing block smoothing, we latch coefficient Al values here */ - int * coef_bits_latch; -#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ -#endif -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - -/* Forward declarations */ -METHODDEF int decompress_onepass - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#ifdef D_MULTISCAN_FILES_SUPPORTED -METHODDEF int decompress_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif -#ifdef BLOCK_SMOOTHING_SUPPORTED -LOCAL boolean smoothing_ok JPP((j_decompress_ptr cinfo)); -METHODDEF int decompress_smooth_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif - - -LOCAL void -start_iMCU_row (j_decompress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row (input side) */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->MCU_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for an input processing pass. - */ - -METHODDEF void -start_input_pass (j_decompress_ptr cinfo) -{ - cinfo->input_iMCU_row = 0; - start_iMCU_row(cinfo); -} - - -/* - * Initialize for an output processing pass. - */ - -METHODDEF void -start_output_pass (j_decompress_ptr cinfo) -{ -#ifdef BLOCK_SMOOTHING_SUPPORTED - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* If multipass, check to see whether to use block smoothing on this pass */ - if (coef->pub.coef_arrays != NULL) { - if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) - coef->pub.decompress_data = decompress_smooth_data; - else - coef->pub.decompress_data = decompress_data; - } -#endif - cinfo->output_iMCU_row = 0; -} - - -/* - * Decompress and return some data in the single-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Input and output must run in lockstep since we have only a one-MCU buffer. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - * For single pass, this is the same as the components in the scan. - */ - -METHODDEF int -decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, useful_width; - JSAMPARRAY output_ptr; - JDIMENSION start_col, output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Loop to process as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ - jzero_far((void FAR *) coef->MCU_buffer[0], - (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - /* Determine where data should go in output_buf and do the IDCT thing. - * We skip dummy blocks at the right and bottom edges (but blkn gets - * incremented past them!). Note the inner loop relies on having - * allocated the MCU_buffer[] blocks sequentially. - */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) { - blkn += compptr->MCU_blocks; - continue; - } - inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; - useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - output_ptr = output_buf[ci] + yoffset * compptr->DCT_scaled_size; - start_col = MCU_col_num * compptr->MCU_sample_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (cinfo->input_iMCU_row < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - output_col = start_col; - for (xindex = 0; xindex < useful_width; xindex++) { - (*inverse_DCT) (cinfo, compptr, - (JCOEFPTR) coef->MCU_buffer[blkn+xindex], - output_ptr, output_col); - output_col += compptr->DCT_scaled_size; - } - } - blkn += compptr->MCU_width; - output_ptr += compptr->DCT_scaled_size; - } - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - cinfo->output_iMCU_row++; - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Dummy consume-input routine for single-pass operation. - */ - -METHODDEF int -dummy_consume_data (j_decompress_ptr cinfo) -{ - return JPEG_SUSPENDED; /* Always indicate nothing was done */ -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Consume input data and store it in the full-image coefficient buffer. - * We read as much as one fully interleaved MCU row ("iMCU" row) per call, - * ie, v_samp_factor block rows for each component in the scan. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - */ - -METHODDEF int -consume_data (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - cinfo->input_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Note: entropy decoder expects buffer to be zeroed, - * but this is handled automatically by the memory manager - * because we requested a pre-zeroed array. - */ - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Decompress and return some data in the multi-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - */ - -METHODDEF int -decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num; - int ci, block_row, block_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number < cinfo->output_scan_number || - (cinfo->input_scan_number == cinfo->output_scan_number && - cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - cinfo->output_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - output_col = 0; - for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { - (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, - output_ptr, output_col); - buffer_ptr++; - output_col += compptr->DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -#ifdef BLOCK_SMOOTHING_SUPPORTED - -/* - * This code applies interblock smoothing as described by section K.8 - * of the JPEG standard: the first 5 AC coefficients are estimated from - * the DC values of a DCT block and its 8 neighboring blocks. - * We apply smoothing only for progressive JPEG decoding, and only if - * the coefficients it can estimate are not yet known to full precision. - */ - -/* - * Determine whether block smoothing is applicable and safe. - * We also latch the current states of the coef_bits[] entries for the - * AC coefficients; otherwise, if the input side of the decompressor - * advances into a new scan, we might think the coefficients are known - * more accurately than they really are. - */ - -LOCAL boolean -smoothing_ok (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - boolean smoothing_useful = FALSE; - int ci, coefi; - jpeg_component_info *compptr; - JQUANT_TBL * qtable; - int * coef_bits; - int * coef_bits_latch; - - if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) - return FALSE; - - /* Allocate latch area if not already done */ - if (coef->coef_bits_latch == NULL) - coef->coef_bits_latch = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * - (SAVED_COEFS * SIZEOF(int))); - coef_bits_latch = coef->coef_bits_latch; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* All components' quantization values must already be latched. */ - if ((qtable = compptr->quant_table) == NULL) - return FALSE; - /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ - for (coefi = 0; coefi <= 5; coefi++) { - if (qtable->quantval[coefi] == 0) - return FALSE; - } - /* DC values must be at least partly known for all components. */ - coef_bits = cinfo->coef_bits[ci]; - if (coef_bits[0] < 0) - return FALSE; - /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ - for (coefi = 1; coefi <= 5; coefi++) { - coef_bits_latch[coefi] = coef_bits[coefi]; - if (coef_bits[coefi] != 0) - smoothing_useful = TRUE; - } - coef_bits_latch += SAVED_COEFS; - } - - return smoothing_useful; -} - - -/* - * Variant of decompress_data for use when doing block smoothing. - */ - -METHODDEF int -decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num, last_block_column; - int ci, block_row, block_rows, access_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr, prev_block_row, next_block_row; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - boolean first_row, last_row; - JBLOCK workspace; - int *coef_bits; - JQUANT_TBL *quanttbl; - JPEG_INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; - int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; - int Al, pred; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if (cinfo->input_scan_number == cinfo->output_scan_number) { - /* If input is working on current scan, we ordinarily want it to - * have completed the current row. But if input scan is DC, - * we want it to keep one row ahead so that next block row's DC - * values are up to date. - */ - JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; - if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) - break; - } - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) { - block_rows = compptr->v_samp_factor; - access_rows = block_rows * 2; /* this and next iMCU row */ - last_row = FALSE; - } else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - access_rows = block_rows; /* this iMCU row only */ - last_row = TRUE; - } - /* Align the virtual buffer for this component. */ - if (cinfo->output_iMCU_row > 0) { - access_rows += compptr->v_samp_factor; /* prior iMCU row too */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, - (JDIMENSION) access_rows, FALSE); - buffer += compptr->v_samp_factor; /* point to current iMCU row */ - first_row = FALSE; - } else { - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); - first_row = TRUE; - } - /* Fetch component-dependent info */ - coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); - quanttbl = compptr->quant_table; - Q00 = quanttbl->quantval[0]; - Q01 = quanttbl->quantval[1]; - Q10 = quanttbl->quantval[2]; - Q20 = quanttbl->quantval[3]; - Q11 = quanttbl->quantval[4]; - Q02 = quanttbl->quantval[5]; - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - if (first_row && block_row == 0) - prev_block_row = buffer_ptr; - else - prev_block_row = buffer[block_row-1]; - if (last_row && block_row == block_rows-1) - next_block_row = buffer_ptr; - else - next_block_row = buffer[block_row+1]; - /* We fetch the surrounding DC values using a sliding-register approach. - * Initialize all nine here so as to do the right thing on narrow pics. - */ - DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; - DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; - DC7 = DC8 = DC9 = (int) next_block_row[0][0]; - output_col = 0; - last_block_column = compptr->width_in_blocks - 1; - for (block_num = 0; block_num <= last_block_column; block_num++) { - /* Fetch current DCT block into workspace so we can modify it. */ - jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); - /* Update DC values */ - if (block_num < last_block_column) { - DC3 = (int) prev_block_row[1][0]; - DC6 = (int) buffer_ptr[1][0]; - DC9 = (int) next_block_row[1][0]; - } - /* Compute coefficient estimates per K.8. - * An estimate is applied only if coefficient is still zero, - * and is not known to be fully accurate. - */ - /* AC01 */ - if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { - num = 36 * Q00 * (DC4 - DC6); - if (num >= 0) { - pred = (int) (((Q01<<7) + num) / (Q01<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q10<<7) + num) / (Q10<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q20<<7) + num) / (Q20<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q11<<7) + num) / (Q11<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q02<<7) + num) / (Q02<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* BLOCK_SMOOTHING_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL void -jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_d_coef_controller *) coef; - coef->pub.start_input_pass = start_input_pass; - coef->pub.start_output_pass = start_output_pass; -#ifdef BLOCK_SMOOTHING_SUPPORTED - coef->coef_bits_latch = NULL; -#endif - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - /* Note we ask for a pre-zeroed array. */ - int ci, access_rows; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - access_rows = compptr->v_samp_factor; -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* If block smoothing could be used, need a bigger window */ - if (cinfo->progressive_mode) - access_rows *= 3; -#endif - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) access_rows); - } - coef->pub.consume_data = consume_data; - coef->pub.decompress_data = decompress_data; - coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->pub.consume_data = dummy_consume_data; - coef->pub.decompress_data = decompress_onepass; - coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ - } -} diff --git a/third_party/jpeg-6/jdcolor.c b/third_party/jpeg-6/jdcolor.c deleted file mode 100644 index 17847f1..0000000 --- a/third_party/jpeg-6/jdcolor.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * jdcolor.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains output colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private subobject */ - -typedef struct { - struct jpeg_color_deconverter pub; /* public fields */ - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - JPEG_INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - JPEG_INT32 * Cb_g_tab; /* => table for Cb to G conversion */ -} my_color_deconverter; - -typedef my_color_deconverter * my_cconvert_ptr; - - -/**************** YCbCr -> RGB conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * where Cb and Cr represent the incoming values less CENTERJSAMPLE. - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * Notice that Y, being an integral input, does not contribute any fraction - * so it need not participate in the rounding. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times Cb and Cr for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The Cr=>R and Cb=>B values can be rounded to integers in advance; the - * values for the G calculation are left scaled up, since we must add them - * together before rounding. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((JPEG_INT32) ((x) * (1L<RGB colorspace conversion. - */ - -LOCAL void -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - int i; - JPEG_INT32 x; - SHIFT_TEMPS - - cconvert->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cr_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); - cconvert->Cb_g_tab = (JPEG_INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(JPEG_INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - cconvert->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - cconvert->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Convert some rows of samples to the output colorspace. - * - * Note that we change from noninterleaved, one-plane-per-component format - * to interleaved-pixel format. The output buffer is therefore three times - * as wide as the input buffer. - * A starting row offset is provided only for the input buffer. The caller - * can easily adjust the passed output_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF void -ycc_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register JPEG_INT32 * Crgtab = cconvert->Cr_g_tab; - register JPEG_INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr += RGB_PIXELSIZE; - } - } -} - - -/**************** Cases other than YCbCr -> RGB **************/ - - -/* - * Color conversion for no colorspace change: just copy the data, - * converting from separate-planes to interleaved representation. - */ - -METHODDEF void -null_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION count; - register int num_components = cinfo->num_components; - JDIMENSION num_cols = cinfo->output_width; - int ci; - - while (--num_rows >= 0) { - for (ci = 0; ci < num_components; ci++) { - inptr = input_buf[ci][input_row]; - outptr = output_buf[0] + ci; - for (count = num_cols; count > 0; count--) { - *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ - outptr += num_components; - } - } - input_row++; - output_buf++; - } -} - - -/* - * Color conversion for grayscale: just copy the data. - * This also works for YCbCr -> grayscale conversion, in which - * we just copy the Y (luminance) component and ignore chrominance. - */ - -METHODDEF void -grayscale_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, - num_rows, cinfo->output_width); -} - - -/* - * Adobe-style YCCK->CMYK conversion. - * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same - * conversion as above, while passing K (black) unchanged. - * We assume build_ycc_rgb_table has been called. - */ - -METHODDEF void -ycck_cmyk_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2, inptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register JPEG_INT32 * Crgtab = cconvert->Cr_g_tab; - register JPEG_INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - inptr3 = input_buf[3][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ - outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS)))]; - outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ - /* K passes through unchanged */ - outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ - outptr += 4; - } - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF void -start_pass_dcolor (j_decompress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for output colorspace conversion. - */ - -GLOBAL void -jinit_color_deconverter (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - int ci; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_deconverter)); - cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; - cconvert->pub.start_pass = start_pass_dcolor; - - /* Make sure num_components agrees with jpeg_color_space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_RGB: - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->num_components < 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - } - - /* Set out_color_components and conversion method based on requested space. - * Also clear the component_needed flags for any unused components, - * so that earlier pipeline stages can avoid useless computation. - */ - - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - if (cinfo->jpeg_color_space == JCS_GRAYSCALE || - cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = grayscale_convert; - /* For color->grayscale conversion, only the Y (0) component is needed */ - for (ci = 1; ci < cinfo->num_components; ci++) - cinfo->comp_info[ci].component_needed = FALSE; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCCK) { - cconvert->pub.color_convert = ycck_cmyk_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_CMYK) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: - /* Permit null conversion to same output space */ - if (cinfo->out_color_space == cinfo->jpeg_color_space) { - cinfo->out_color_components = cinfo->num_components; - cconvert->pub.color_convert = null_convert; - } else /* unsupported non-null conversion */ - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - } - - if (cinfo->quantize_colors) - cinfo->output_components = 1; /* single colormapped output component */ - else - cinfo->output_components = cinfo->out_color_components; -} diff --git a/third_party/jpeg-6/jdct.h b/third_party/jpeg-6/jdct.h deleted file mode 100644 index e9ecfc4..0000000 --- a/third_party/jpeg-6/jdct.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * jdct.h - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file contains common declarations for the forward and - * inverse DCT modules. These declarations are private to the DCT managers - * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. - * The individual DCT algorithms are kept in separate files to ease - * machine-dependent tuning (e.g., assembly coding). - */ - - -/* - * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; - * the DCT is to be performed in-place in that buffer. Type DCTELEM is int - * for 8-bit samples, JPEG_INT32 for 12-bit samples. (NOTE: Floating-point DCT - * implementations use an array of type FAST_FLOAT, instead.) - * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). - * The DCT outputs are returned scaled up by a factor of 8; they therefore - * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This - * convention improves accuracy in integer implementations and saves some - * work in floating-point ones. - * Quantization of the output coefficients is done by jcdctmgr.c. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef int DCTELEM; /* 16 or 32 bits is fine */ -#else -typedef JPEG_INT32 DCTELEM; /* must have 32 bits */ -#endif - -typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); -typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); - - -/* - * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer - * to an output sample array. The routine must dequantize the input data as - * well as perform the IDCT; for dequantization, it uses the multiplier table - * pointed to by compptr->dct_table. The output data is to be placed into the - * sample array starting at a specified column. (Any row offset needed will - * be applied to the array pointer before it is passed to the IDCT code.) - * Note that the number of samples emitted by the IDCT routine is - * DCT_scaled_size * DCT_scaled_size. - */ - -/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ - -/* - * Each IDCT routine has its own ideas about the best dct_table element type. - */ - -typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ -#if BITS_IN_JSAMPLE == 8 -typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ -#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ -#else -typedef JPEG_INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ -#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ -#endif -typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ - - -/* - * Each IDCT routine is responsible for range-limiting its results and - * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could - * be quite far out of range if the input data is corrupt, so a bulletproof - * range-limiting step is required. We use a mask-and-table-lookup method - * to do the combined operations quickly. See the comments with - * prepare_range_limit_table (in jdmaster.c) for more info. - */ - -#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) - -#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_fdct_islow jFDislow -#define jpeg_fdct_ifast jFDifast -#define jpeg_fdct_float jFDfloat -#define jpeg_idct_islow jRDislow -#define jpeg_idct_ifast jRDifast -#define jpeg_idct_float jRDfloat -#define jpeg_idct_4x4 jRD4x4 -#define jpeg_idct_2x2 jRD2x2 -#define jpeg_idct_1x1 jRD1x1 -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Extern declarations for the forward and inverse DCT routines. */ - -EXTERN void jpeg_fdct_islow JPP((DCTELEM * data)); -EXTERN void jpeg_fdct_ifast JPP((DCTELEM * data)); -EXTERN void jpeg_fdct_float JPP((FAST_FLOAT * data)); - -EXTERN void jpeg_idct_islow - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_ifast - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_float - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_4x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_2x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN void jpeg_idct_1x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); - - -/* - * Macros for handling fixed-point arithmetic; these are used by many - * but not all of the DCT/IDCT modules. - * - * All values are expected to be of type JPEG_INT32. - * Fractional constants are scaled left by CONST_BITS bits. - * CONST_BITS is defined within each module using these macros, - * and may differ from one module to the next. - */ - -#define ONE ((JPEG_INT32) 1) -#define CONST_SCALE (ONE << CONST_BITS) - -/* Convert a positive real constant to an integer scaled by CONST_SCALE. - * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, - * thus causing a lot of useless floating-point operations at run time. - */ - -#define FIX(x) ((JPEG_INT32) ((x) * CONST_SCALE + 0.5)) - -/* Descale and correctly round an JPEG_INT32 value that's scaled by N bits. - * We assume RIGHT_SHIFT rounds towards minus infinity, so adding - * the fudge factor is correct for either sign of X. - */ - -#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) - -/* Multiply an JPEG_INT32 variable by an JPEG_INT32 constant to yield an JPEG_INT32 result. - * This macro is used only when the two inputs will actually be no more than - * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a - * full 32x32 multiply. This provides a useful speedup on many machines. - * Unfortunately there is no way to specify a 16x16->32 multiply portably - * in C, but some C compilers will do the right thing if you provide the - * correct combination of casts. - */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) -#endif -#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((JPEG_INT32) (const))) -#endif - -#ifndef MULTIPLY16C16 /* default definition */ -#define MULTIPLY16C16(var,const) ((var) * (const)) -#endif - -/* Same except both inputs are variables. */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) -#endif - -#ifndef MULTIPLY16V16 /* default definition */ -#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) -#endif diff --git a/third_party/jpeg-6/jddctmgr.c b/third_party/jpeg-6/jddctmgr.c deleted file mode 100644 index 8182924..0000000 --- a/third_party/jpeg-6/jddctmgr.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * jddctmgr.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the inverse-DCT management logic. - * This code selects a particular IDCT implementation to be used, - * and it performs related housekeeping chores. No code in this file - * is executed per IDCT step, only during output pass setup. - * - * Note that the IDCT routines are responsible for performing coefficient - * dequantization as well as the IDCT proper. This module sets up the - * dequantization multiplier table needed by the IDCT routine. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* - * The decompressor input side (jdinput.c) saves away the appropriate - * quantization table for each component at the start of the first scan - * involving that component. (This is necessary in order to correctly - * decode files that reuse Q-table slots.) - * When we are ready to make an output pass, the saved Q-table is converted - * to a multiplier table that will actually be used by the IDCT routine. - * The multiplier table contents are IDCT-method-dependent. To support - * application changes in IDCT method between scans, we can remake the - * multiplier tables if necessary. - * In buffered-image mode, the first output pass may occur before any data - * has been seen for some components, and thus before their Q-tables have - * been saved away. To handle this case, multiplier tables are preset - * to zeroes; the result of the IDCT will be a neutral gray level. - */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_inverse_dct pub; /* public fields */ - - /* This array contains the IDCT method code that each multiplier table - * is currently set up for, or -1 if it's not yet set up. - * The actual multiplier tables are pointed to by dct_table in the - * per-component comp_info structures. - */ - int cur_method[MAX_COMPONENTS]; -} my_idct_controller; - -typedef my_idct_controller * my_idct_ptr; - - -/* Allocated multiplier tables: big enough for any supported variant */ - -typedef union { - ISLOW_MULT_TYPE islow_array[DCTSIZE2]; -#ifdef DCT_IFAST_SUPPORTED - IFAST_MULT_TYPE ifast_array[DCTSIZE2]; -#endif -#ifdef DCT_FLOAT_SUPPORTED - FLOAT_MULT_TYPE float_array[DCTSIZE2]; -#endif -} multiplier_table; - - -/* The current scaled-IDCT routines require ISLOW-style multiplier tables, - * so be sure to compile that code if either ISLOW or SCALING is requested. - */ -#ifdef DCT_ISLOW_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#else -#ifdef IDCT_SCALING_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#endif -#endif - - -/* - * Prepare for an output pass. - * Here we select the proper IDCT routine for each component and build - * a matching multiplier table. - */ - -METHODDEF void -start_pass (j_decompress_ptr cinfo) -{ - my_idct_ptr idct = (my_idct_ptr) cinfo->idct; - int ci, i; - jpeg_component_info *compptr; - int method = 0; - inverse_DCT_method_ptr method_ptr = NULL; - JQUANT_TBL * qtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Select the proper IDCT routine for this component's scaling */ - switch (compptr->DCT_scaled_size) { -#ifdef IDCT_SCALING_SUPPORTED - case 1: - method_ptr = jpeg_idct_1x1; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 2: - method_ptr = jpeg_idct_2x2; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 4: - method_ptr = jpeg_idct_4x4; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; -#endif - case DCTSIZE: - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - method_ptr = jpeg_idct_islow; - method = JDCT_ISLOW; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - method_ptr = jpeg_idct_ifast; - method = JDCT_IFAST; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - method_ptr = jpeg_idct_float; - method = JDCT_FLOAT; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - break; - default: - ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); - break; - } - idct->pub.inverse_DCT[ci] = method_ptr; - /* Create multiplier table from quant table. - * However, we can skip this if the component is uninteresting - * or if we already built the table. Also, if no quant table - * has yet been saved for the component, we leave the - * multiplier table all-zero; we'll be reading zeroes from the - * coefficient controller's buffer anyway. - */ - if (! compptr->component_needed || idct->cur_method[ci] == method) - continue; - qtbl = compptr->quant_table; - if (qtbl == NULL) /* happens if no data yet for component */ - continue; - idct->cur_method[ci] = method; - switch (method) { -#ifdef PROVIDE_ISLOW_TABLES - case JDCT_ISLOW: - { - /* For LL&M IDCT method, multipliers are equal to raw quantization - * coefficients, but are stored in natural order as ints. - */ - ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; - for (i = 0; i < DCTSIZE2; i++) { - ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[jpeg_zigzag_order[i]]; - } - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * For integer operation, the multiplier table is to be scaled by - * IFAST_SCALE_BITS. The multipliers are stored in natural order. - */ - IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - for (i = 0; i < DCTSIZE2; i++) { - ifmtbl[i] = (IFAST_MULT_TYPE) - DESCALE(MULTIPLY16V16((JPEG_INT32) qtbl->quantval[jpeg_zigzag_order[i]], - (JPEG_INT32) aanscales[i]), - CONST_BITS-IFAST_SCALE_BITS); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * The multipliers are stored in natural order. - */ - FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fmtbl[i] = (FLOAT_MULT_TYPE) - ((double) qtbl->quantval[jpeg_zigzag_order[i]] * - aanscalefactor[row] * aanscalefactor[col]); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Initialize IDCT manager. - */ - -GLOBAL void -jinit_inverse_dct (j_decompress_ptr cinfo) -{ - my_idct_ptr idct; - int ci; - jpeg_component_info *compptr; - - idct = (my_idct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_idct_controller)); - cinfo->idct = (struct jpeg_inverse_dct *) idct; - idct->pub.start_pass = start_pass; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate and pre-zero a multiplier table for each component */ - compptr->dct_table = - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(multiplier_table)); - MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); - /* Mark multiplier table not yet set up for any method */ - idct->cur_method[ci] = -1; - } -} diff --git a/third_party/jpeg-6/jdhuff.c b/third_party/jpeg-6/jdhuff.c deleted file mode 100644 index 6cd155b..0000000 --- a/third_party/jpeg-6/jdhuff.c +++ /dev/null @@ -1,574 +0,0 @@ -/* - * jdhuff.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdphuff.c */ - - -/* - * Expanded entropy decoder object for Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; -} huff_entropy_decoder; - -typedef huff_entropy_decoder * huff_entropy_ptr; - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF void -start_pass_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning because - * there are some baseline files out there with all zeroes in these bytes. - */ - if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || - cinfo->Ah != 0 || cinfo->Al != 0) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - /* Make sure requested tables are present */ - if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS || - cinfo->dc_huff_tbl_ptrs[dctbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); - if (actbl < 0 || actbl >= NUM_HUFF_TBLS || - cinfo->ac_huff_tbl_ptrs[actbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl], - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl], - & entropy->ac_derived_tbls[actbl]); - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->bitstate.printed_eod = FALSE; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Compute the derived values for a Huffman table. - * Note this is also used by jdphuff.c. - */ - -GLOBAL void -jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl, - d_derived_tbl ** pdtbl) -{ - d_derived_tbl *dtbl; - int p, i, l, si; - int lookbits, ctr; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (d_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(d_derived_tbl)); - dtbl = *pdtbl; - dtbl->pub = htbl; /* fill in back link */ - - /* Figure C.1: make table of Huffman code length for each symbol */ - /* Note that this is in code-length order. */ - - p = 0; - for (l = 1; l <= 16; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - - /* Figure C.2: generate the codes themselves */ - /* Note that this is in code-length order. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - code <<= 1; - si++; - } - - /* Figure F.15: generate decoding tables for bit-sequential decoding */ - - p = 0; - for (l = 1; l <= 16; l++) { - if (htbl->bits[l]) { - dtbl->valptr[l] = p; /* huffval[] index of 1st symbol of code length l */ - dtbl->mincode[l] = huffcode[p]; /* minimum code of length l */ - p += htbl->bits[l]; - dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ - } else { - dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ - } - } - dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ - - /* Compute lookahead tables to speed up decoding. - * First we set all the table entries to 0, indicating "too long"; - * then we iterate through the Huffman codes that are short enough and - * fill in all the entries that correspond to bit sequences starting - * with that code. - */ - - MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); - - p = 0; - for (l = 1; l <= HUFF_LOOKAHEAD; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { - /* l = current code's length, p = its index in huffcode[] & huffval[]. */ - /* Generate left-justified code followed by all possible bit sequences */ - lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); - for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { - dtbl->look_nbits[lookbits] = l; - dtbl->look_sym[lookbits] = htbl->huffval[p]; - lookbits++; - } - } - } -} - - -/* - * Out-of-line code for bit fetching (shared with jdphuff.c). - * See jdhuff.h for info about usage. - * Note: current values of get_buffer and bits_left are passed as parameters, - * but are returned in the corresponding fields of the state struct. - * - * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width - * of get_buffer to be used. (On machines with wider words, an even larger - * buffer could be used.) However, on some machines 32-bit shifts are - * quite slow and take time proportional to the number of places shifted. - * (This is true with most PC compilers, for instance.) In this case it may - * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the - * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. - */ - -#ifdef SLOW_SHIFT_32 -#define MIN_GET_BITS 15 /* minimum allowable value */ -#else -#define MIN_GET_BITS (BIT_BUF_SIZE-7) -#endif - - -GLOBAL boolean -jpeg_fill_bit_buffer (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits) -/* Load up the bit buffer to a depth of at least nbits */ -{ - /* Copy heavily used state fields into locals (hopefully registers) */ - register const JOCTET * next_input_byte = state->next_input_byte; - register size_t bytes_in_buffer = state->bytes_in_buffer; - register int c; - - /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ - /* (It is assumed that no request will be for more than that many bits.) */ - - while (bits_left < MIN_GET_BITS) { - /* Attempt to read a byte */ - if (state->unread_marker != 0) - goto no_more_data; /* can't advance past a marker */ - - if (bytes_in_buffer == 0) { - if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) - return FALSE; - next_input_byte = state->cinfo->src->next_input_byte; - bytes_in_buffer = state->cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - - /* If it's 0xFF, check and discard stuffed zero byte */ - if (c == 0xFF) { - do { - if (bytes_in_buffer == 0) { - if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo)) - return FALSE; - next_input_byte = state->cinfo->src->next_input_byte; - bytes_in_buffer = state->cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - } while (c == 0xFF); - - if (c == 0) { - /* Found FF/00, which represents an FF data byte */ - c = 0xFF; - } else { - /* Oops, it's actually a marker indicating end of compressed data. */ - /* Better put it back for use later */ - state->unread_marker = c; - - no_more_data: - /* There should be enough bits still left in the data segment; */ - /* if so, just break out of the outer while loop. */ - if (bits_left >= nbits) - break; - /* Uh-oh. Report corrupted data to user and stuff zeroes into - * the data stream, so that we can produce some kind of image. - * Note that this code will be repeated for each byte demanded - * for the rest of the segment. We use a nonvolatile flag to ensure - * that only one warning message appears. - */ - if (! *(state->printed_eod_ptr)) { - WARNMS(state->cinfo, JWRN_HIT_MARKER); - *(state->printed_eod_ptr) = TRUE; - } - c = 0; /* insert a zero byte into bit buffer */ - } - } - - /* OK, load c into get_buffer */ - get_buffer = (get_buffer << 8) | c; - bits_left += 8; - } - - /* Unload the local registers */ - state->next_input_byte = next_input_byte; - state->bytes_in_buffer = bytes_in_buffer; - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - return TRUE; -} - - -/* - * Out-of-line code for Huffman code decoding. - * See jdhuff.h for info about usage. - */ - -GLOBAL int -jpeg_huff_decode (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits) -{ - register int l = min_bits; - register JPEG_INT32 code; - - /* HUFF_DECODE has determined that the code is at least min_bits */ - /* bits long, so fetch that many bits in one swoop. */ - - CHECK_BIT_BUFFER(*state, l, return -1); - code = GET_BITS(l); - - /* Collect the rest of the Huffman code one bit at a time. */ - /* This is per Figure F.16 in the JPEG spec. */ - - while (code > htbl->maxcode[l]) { - code <<= 1; - CHECK_BIT_BUFFER(*state, 1, return -1); - code |= GET_BITS(1); - l++; - } - - /* Unload the local registers */ - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - /* With garbage input we may reach the sentinel value l = 17. */ - - if (l > 16) { - WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); - return 0; /* fake a zero as the safest result */ - } - - return htbl->pub->huffval[ htbl->valptr[l] + - ((int) (code - htbl->mincode[l])) ]; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL boolean -process_restart (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Next segment can get another out-of-data warning */ - entropy->bitstate.printed_eod = FALSE; - - return TRUE; -} - - -/* - * Decode and return one MCU's worth of Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. - * (Wholesale zeroing is usually a little faster than retail...) - * - * Returns FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * this module, since we'll just re-assign them on the next call.) - */ - -METHODDEF boolean -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - register int s, k, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * dctbl; - d_derived_tbl * actbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - dctbl = entropy->dc_derived_tbls[compptr->dc_tbl_no]; - actbl = entropy->ac_derived_tbls[compptr->ac_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Shortcut if component's values are not interesting */ - if (! compptr->component_needed) - goto skip_ACs; - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ - (*block)[0] = (JCOEF) s; - - /* Do we need to decode the AC coefficients for this component? */ - if (compptr->DCT_scaled_size > 1) { - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in jpeg_natural_order[] will save us - * if k >= DCTSIZE2, which could happen if the data is corrupted. - */ - (*block)[jpeg_natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - break; - k += 15; - } - } - - } else { -skip_ACs: - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - } - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Module initialization routine for Huffman entropy decoding. - */ - -GLOBAL void -jinit_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_huff_decoder; - entropy->pub.decode_mcu = decode_mcu; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - } -} diff --git a/third_party/jpeg-6/jdhuff.h b/third_party/jpeg-6/jdhuff.h deleted file mode 100644 index b4e7e29..0000000 --- a/third_party/jpeg-6/jdhuff.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * jdhuff.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy decoding routines - * that are shared between the sequential decoder (jdhuff.c) and the - * progressive decoder (jdphuff.c). No other modules need to see these. - */ - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_d_derived_tbl jMkDDerived -#define jpeg_fill_bit_buffer jFilBitBuf -#define jpeg_huff_decode jHufDecode -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Derived data constructed for each Huffman table */ - -#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ - -typedef struct { - /* Basic tables: (element [0] of each array is unused) */ - JPEG_INT32 mincode[17]; /* smallest code of length k */ - JPEG_INT32 maxcode[18]; /* largest code of length k (-1 if none) */ - /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ - int valptr[17]; /* huffval[] index of 1st symbol of length k */ - - /* Link to public Huffman table (needed only in jpeg_huff_decode) */ - JHUFF_TBL *pub; - - /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of - * the input data stream. If the next Huffman code is no more - * than HUFF_LOOKAHEAD bits long, we can obtain its length and - * the corresponding symbol directly from these tables. - */ - int look_nbits[1< 32 bits on your machine, and shifting/masking longs is - * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE - * appropriately should be a win. Unfortunately we can't do this with - * something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) - * because not all machines measure sizeof in 8-bit bytes. - */ - -typedef struct { /* Bitreading state saved across MCUs */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - boolean printed_eod; /* flag to suppress multiple warning msgs */ -} bitread_perm_state; - -typedef struct { /* Bitreading working state within an MCU */ - /* current data source state */ - const JOCTET * next_input_byte; /* => next byte to read from source */ - size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ - int unread_marker; /* nonzero if we have hit a marker */ - /* bit input buffer --- note these values are kept in register variables, - * not in this struct, inside the inner loops. - */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - /* pointers needed by jpeg_fill_bit_buffer */ - j_decompress_ptr cinfo; /* back link to decompress master record */ - boolean * printed_eod_ptr; /* => flag in permanent state */ -} bitread_working_state; - -/* Macros to declare and load/save bitread local variables. */ -#define BITREAD_STATE_VARS \ - register bit_buf_type get_buffer; \ - register int bits_left; \ - bitread_working_state br_state - -#define BITREAD_LOAD_STATE(cinfop,permstate) \ - br_state.cinfo = cinfop; \ - br_state.next_input_byte = cinfop->src->next_input_byte; \ - br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ - br_state.unread_marker = cinfop->unread_marker; \ - get_buffer = permstate.get_buffer; \ - bits_left = permstate.bits_left; \ - br_state.printed_eod_ptr = & permstate.printed_eod - -#define BITREAD_SAVE_STATE(cinfop,permstate) \ - cinfop->src->next_input_byte = br_state.next_input_byte; \ - cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ - cinfop->unread_marker = br_state.unread_marker; \ - permstate.get_buffer = get_buffer; \ - permstate.bits_left = bits_left - -/* - * These macros provide the in-line portion of bit fetching. - * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer - * before using GET_BITS, PEEK_BITS, or DROP_BITS. - * The variables get_buffer and bits_left are assumed to be locals, - * but the state struct might not be (jpeg_huff_decode needs this). - * CHECK_BIT_BUFFER(state,n,action); - * Ensure there are N bits in get_buffer; if suspend, take action. - * val = GET_BITS(n); - * Fetch next N bits. - * val = PEEK_BITS(n); - * Fetch next N bits without removing them from the buffer. - * DROP_BITS(n); - * Discard next N bits. - * The value N should be a simple variable, not an expression, because it - * is evaluated multiple times. - */ - -#define CHECK_BIT_BUFFER(state,nbits,action) \ - { if (bits_left < (nbits)) { \ - if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ - { action; } \ - get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } - -#define GET_BITS(nbits) \ - (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) - -#define PEEK_BITS(nbits) \ - (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) - -#define DROP_BITS(nbits) \ - (bits_left -= (nbits)) - -/* Load up the bit buffer to a depth of at least nbits */ -EXTERN boolean jpeg_fill_bit_buffer JPP((bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits)); - - -/* - * Code for extracting next Huffman-coded symbol from input bit stream. - * Again, this is time-critical and we make the main paths be macros. - * - * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits - * without looping. Usually, more than 95% of the Huffman codes will be 8 - * or fewer bits long. The few overlength codes are handled with a loop, - * which need not be inline code. - * - * Notes about the HUFF_DECODE macro: - * 1. Near the end of the data segment, we may fail to get enough bits - * for a lookahead. In that case, we do it the hard way. - * 2. If the lookahead table contains no entry, the next code must be - * more than HUFF_LOOKAHEAD bits long. - * 3. jpeg_huff_decode returns -1 if forced to suspend. - */ - -#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ -{ register int nb, look; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - nb = 1; goto slowlabel; \ - } \ - } \ - look = PEEK_BITS(HUFF_LOOKAHEAD); \ - if ((nb = htbl->look_nbits[look]) != 0) { \ - DROP_BITS(nb); \ - result = htbl->look_sym[look]; \ - } else { \ - nb = HUFF_LOOKAHEAD+1; \ -slowlabel: \ - if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ - { failaction; } \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - } \ -} - -/* Out-of-line case for Huffman code fetching */ -EXTERN int jpeg_huff_decode JPP((bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits)); diff --git a/third_party/jpeg-6/jdinput.c b/third_party/jpeg-6/jdinput.c deleted file mode 100644 index 3061a17..0000000 --- a/third_party/jpeg-6/jdinput.c +++ /dev/null @@ -1,381 +0,0 @@ -/* - * jdinput.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input control logic for the JPEG decompressor. - * These routines are concerned with controlling the decompressor's input - * processing (marker reading and coefficient decoding). The actual input - * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_input_controller pub; /* public fields */ - - boolean inheaders; /* TRUE until first SOS is reached */ -} my_input_controller; - -typedef my_input_controller * my_inputctl_ptr; - - -/* Forward declarations */ -METHODDEF int consume_markers JPP((j_decompress_ptr cinfo)); - - -/* - * Routines to calculate various quantities related to the size of the image. - */ - -LOCAL void -initial_setup (j_decompress_ptr cinfo) -/* Called once, when first SOS marker is reached */ -{ - int ci; - jpeg_component_info *compptr; - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. - * In the full decompressor, this will be overridden by jdmaster.c; - * but in the transcoder, jdmaster.c is not used, so we must do it here. - */ - cinfo->min_DCT_scaled_size = DCTSIZE; - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* downsampled_width and downsampled_height will also be overridden by - * jdmaster.c if we are doing full decompression. The transcoder library - * doesn't use these values, but the calling application might. - */ - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed, until color conversion says otherwise */ - compptr->component_needed = TRUE; - /* Mark no quantization table yet saved for component */ - compptr->quant_table = NULL; - } - - /* Compute number of fully interleaved MCU rows. */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - /* Decide whether file contains multiple scans */ - if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) - cinfo->inputctl->has_multiple_scans = TRUE; - else - cinfo->inputctl->has_multiple_scans = FALSE; -} - - -LOCAL void -per_scan_setup (j_decompress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } -} - - -/* - * Save away a copy of the Q-table referenced by each component present - * in the current scan, unless already saved during a prior scan. - * - * In a multiple-scan JPEG file, the encoder could assign different components - * the same Q-table slot number, but change table definitions between scans - * so that each component uses a different Q-table. (The IJG encoder is not - * currently capable of doing this, but other encoders might.) Since we want - * to be able to dequantize all the components at the end of the file, this - * means that we have to save away the table actually used for each component. - * We do this by copying the table at the start of the first scan containing - * the component. - * The JPEG spec prohibits the encoder from changing the contents of a Q-table - * slot between scans of a component using that slot. If the encoder does so - * anyway, this decoder will simply use the Q-table values that were current - * at the start of the first scan for the component. - * - * The decompressor output side looks only at the saved quant tables, - * not at the current Q-table slots. - */ - -LOCAL void -latch_quant_tables (j_decompress_ptr cinfo) -{ - int ci, qtblno; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* No work if we already saved Q-table for this component */ - if (compptr->quant_table != NULL) - continue; - /* Make sure specified quantization table is present */ - qtblno = compptr->quant_tbl_no; - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - /* OK, save away the quantization table */ - qtbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(JQUANT_TBL)); - MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); - compptr->quant_table = qtbl; - } -} - - -/* - * Initialize the input modules to read a scan of compressed data. - * The first call to this is done by jdmaster.c after initializing - * the entire decompressor (during jpeg_start_decompress). - * Subsequent calls come from consume_markers, below. - */ - -METHODDEF void -start_input_pass (j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); - latch_quant_tables(cinfo); - (*cinfo->entropy->start_pass) (cinfo); - (*cinfo->coef->start_input_pass) (cinfo); - cinfo->inputctl->consume_input = cinfo->coef->consume_data; -} - - -/* - * Finish up after inputting a compressed-data scan. - * This is called by the coefficient controller after it's read all - * the expected data of the scan. - */ - -METHODDEF void -finish_input_pass (j_decompress_ptr cinfo) -{ - cinfo->inputctl->consume_input = consume_markers; -} - - -/* - * Read JPEG markers before, between, or after compressed-data scans. - * Change state as necessary when a new scan is reached. - * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * The consume_input method pointer points either here or to the - * coefficient controller's consume_data routine, depending on whether - * we are reading a compressed data segment or inter-segment markers. - */ - -METHODDEF int -consume_markers (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - int val; - - if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ - return JPEG_REACHED_EOI; - - val = (*cinfo->marker->read_markers) (cinfo); - - switch (val) { - case JPEG_REACHED_SOS: /* Found SOS */ - if (inputctl->inheaders) { /* 1st SOS */ - initial_setup(cinfo); - inputctl->inheaders = FALSE; - /* Note: start_input_pass must be called by jdmaster.c - * before any more input can be consumed. jdapi.c is - * responsible for enforcing this sequencing. - */ - } else { /* 2nd or later SOS marker */ - if (! inputctl->pub.has_multiple_scans) - ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ - start_input_pass(cinfo); - } - break; - case JPEG_REACHED_EOI: /* Found EOI */ - inputctl->pub.eoi_reached = TRUE; - if (inputctl->inheaders) { /* Tables-only datastream, apparently */ - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_NO_SOS); - } else { - /* Prevent infinite loop in coef ctlr's decompress_data routine - * if user set output_scan_number larger than number of scans. - */ - if (cinfo->output_scan_number > cinfo->input_scan_number) - cinfo->output_scan_number = cinfo->input_scan_number; - } - break; - case JPEG_SUSPENDED: - break; - } - - return val; -} - - -/* - * Reset state to begin a fresh datastream. - */ - -METHODDEF void -reset_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - - inputctl->pub.consume_input = consume_markers; - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; - /* Reset other modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->marker->reset_marker_reader) (cinfo); - /* Reset progression state -- would be cleaner if entropy decoder did this */ - cinfo->coef_bits = NULL; -} - - -/* - * Initialize the input controller module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL void -jinit_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl; - - /* Create subobject in permanent pool */ - inputctl = (my_inputctl_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_input_controller)); - cinfo->inputctl = (struct jpeg_input_controller *) inputctl; - /* Initialize method pointers */ - inputctl->pub.consume_input = consume_markers; - inputctl->pub.reset_input_controller = reset_input_controller; - inputctl->pub.start_input_pass = start_input_pass; - inputctl->pub.finish_input_pass = finish_input_pass; - /* Initialize state: can't use reset_input_controller since we don't - * want to try to reset other modules yet. - */ - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; -} diff --git a/third_party/jpeg-6/jdmainct.c b/third_party/jpeg-6/jdmainct.c deleted file mode 100644 index 6cb0b7a..0000000 --- a/third_party/jpeg-6/jdmainct.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * jdmainct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for decompression. - * The main buffer lies between the JPEG decompressor proper and the - * post-processor; it holds downsampled data in the JPEG colorspace. - * - * Note that this code is bypassed in raw-data mode, since the application - * supplies the equivalent of the main buffer in that case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * In the current system design, the main buffer need never be a full-image - * buffer; any full-height buffers will be found inside the coefficient or - * postprocessing controllers. Nonetheless, the main controller is not - * trivial. Its responsibility is to provide context rows for upsampling/ - * rescaling, and doing this in an efficient fashion is a bit tricky. - * - * Postprocessor input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. (We require DCT_scaled_size values to be - * chosen such that these numbers are integers. In practice DCT_scaled_size - * values will likely be powers of two, so we actually have the stronger - * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) - * Upsampling will typically produce max_v_samp_factor pixel rows from each - * row group (times any additional scale factor that the upsampler is - * applying). - * - * The coefficient controller will deliver data to us one iMCU row at a time; - * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or - * exactly min_DCT_scaled_size row groups. (This amount of data corresponds - * to one row of MCUs when the image is fully interleaved.) Note that the - * number of sample rows varies across components, but the number of row - * groups does not. Some garbage sample rows may be included in the last iMCU - * row at the bottom of the image. - * - * Depending on the vertical scaling algorithm used, the upsampler may need - * access to the sample row(s) above and below its current input row group. - * The upsampler is required to set need_context_rows TRUE at global selection - * time if so. When need_context_rows is FALSE, this controller can simply - * obtain one iMCU row at a time from the coefficient controller and dole it - * out as row groups to the postprocessor. - * - * When need_context_rows is TRUE, this controller guarantees that the buffer - * passed to postprocessing contains at least one row group's worth of samples - * above and below the row group(s) being processed. Note that the context - * rows "above" the first passed row group appear at negative row offsets in - * the passed buffer. At the top and bottom of the image, the required - * context rows are manufactured by duplicating the first or last real sample - * row; this avoids having special cases in the upsampling inner loops. - * - * The amount of context is fixed at one row group just because that's a - * convenient number for this controller to work with. The existing - * upsamplers really only need one sample row of context. An upsampler - * supporting arbitrary output rescaling might wish for more than one row - * group of context when shrinking the image; tough, we don't handle that. - * (This is justified by the assumption that downsizing will be handled mostly - * by adjusting the DCT_scaled_size values, so that the actual scale factor at - * the upsample step needn't be much less than one.) - * - * To provide the desired context, we have to retain the last two row groups - * of one iMCU row while reading in the next iMCU row. (The last row group - * can't be processed until we have another row group for its below-context, - * and so we have to save the next-to-last group too for its above-context.) - * We could do this most simply by copying data around in our buffer, but - * that'd be very slow. We can avoid copying any data by creating a rather - * strange pointer structure. Here's how it works. We allocate a workspace - * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number - * of row groups per iMCU row). We create two sets of redundant pointers to - * the workspace. Labeling the physical row groups 0 to M+1, the synthesized - * pointer lists look like this: - * M+1 M-1 - * master pointer --> 0 master pointer --> 0 - * 1 1 - * ... ... - * M-3 M-3 - * M-2 M - * M-1 M+1 - * M M-2 - * M+1 M-1 - * 0 0 - * We read alternate iMCU rows using each master pointer; thus the last two - * row groups of the previous iMCU row remain un-overwritten in the workspace. - * The pointer lists are set up so that the required context rows appear to - * be adjacent to the proper places when we pass the pointer lists to the - * upsampler. - * - * The above pictures describe the normal state of the pointer lists. - * At top and bottom of the image, we diddle the pointer lists to duplicate - * the first or last sample row as necessary (this is cheaper than copying - * sample rows around). - * - * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that - * situation each iMCU row provides only one row group so the buffering logic - * must be different (eg, we must read two iMCU rows before we can emit the - * first row group). For now, we simply do not support providing context - * rows when min_DCT_scaled_size is 1. That combination seems unlikely to - * be worth providing --- if someone wants a 1/8th-size preview, they probably - * want it quick and dirty, so a context-free upsampler is sufficient. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_main_controller pub; /* public fields */ - - /* Pointer to allocated workspace (M or M+2 row groups). */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - - boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ - JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ - - /* Remaining fields are only used in the context case. */ - - /* These are the master pointers to the funny-order pointer lists. */ - JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ - - int whichptr; /* indicates which pointer set is now in use */ - int context_state; /* process_data state machine status */ - JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ - JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - -/* context_state values: */ -#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ -#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ -#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ - - -/* Forward declarations */ -METHODDEF void process_data_simple_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -METHODDEF void process_data_context_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF void process_data_crank_post - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#endif - - -LOCAL void -alloc_funny_pointers (j_decompress_ptr cinfo) -/* Allocate space for the funny pointer lists. - * This is done only once, not once per pass. - */ -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - int ci, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - /* Get top-level space for component array pointers. - * We alloc both arrays with one call to save a few cycles. - */ - jmain->xbuffer[0] = (JSAMPIMAGE) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); - jmain->xbuffer[1] = jmain->xbuffer[0] + cinfo->num_components; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - /* Get space for pointer lists --- M+4 row groups in each list. - * We alloc both pointer lists with one call to save a few cycles. - */ - xbuf = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); - xbuf += rgroup; /* want one row group at negative offsets */ - jmain->xbuffer[0][ci] = xbuf; - xbuf += rgroup * (M + 4); - jmain->xbuffer[1][ci] = xbuf; - } -} - - -LOCAL void -make_funny_pointers (j_decompress_ptr cinfo) -/* Create the funny pointer lists discussed in the comments above. - * The actual workspace is already allocated (in main->buffer), - * and the space for the pointer lists is allocated too. - * This routine just fills in the curiously ordered lists. - * This will be repeated at the beginning of each pass. - */ -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY buf, xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = jmain->xbuffer[0][ci]; - xbuf1 = jmain->xbuffer[1][ci]; - /* First copy the workspace pointers as-is */ - buf = jmain->buffer[ci]; - for (i = 0; i < rgroup * (M + 2); i++) { - xbuf0[i] = xbuf1[i] = buf[i]; - } - /* In the second list, put the last four row groups in swapped order */ - for (i = 0; i < rgroup * 2; i++) { - xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; - xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; - } - /* The wraparound pointers at top and bottom will be filled later - * (see set_wraparound_pointers, below). Initially we want the "above" - * pointers to duplicate the first actual data line. This only needs - * to happen in xbuffer[0]. - */ - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[0]; - } - } -} - - -LOCAL void -set_wraparound_pointers (j_decompress_ptr cinfo) -/* Set up the "wraparound" pointers at top and bottom of the pointer lists. - * This changes the pointer list state from top-of-image to the normal state. - */ -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = jmain->xbuffer[0][ci]; - xbuf1 = jmain->xbuffer[1][ci]; - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; - xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; - xbuf0[rgroup*(M+2) + i] = xbuf0[i]; - xbuf1[rgroup*(M+2) + i] = xbuf1[i]; - } - } -} - - -LOCAL void -set_bottom_pointers (j_decompress_ptr cinfo) -/* Change the pointer lists to duplicate the last sample row at the bottom - * of the image. whichptr indicates which xbuffer holds the final iMCU row. - * Also sets rowgroups_avail to indicate number of nondummy row groups in row. - */ -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - int ci, i, rgroup, iMCUheight, rows_left; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Count sample rows in one iMCU row and in one row group */ - iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; - rgroup = iMCUheight / cinfo->min_DCT_scaled_size; - /* Count nondummy sample rows remaining for this component */ - rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); - if (rows_left == 0) rows_left = iMCUheight; - /* Count nondummy row groups. Should get same answer for each component, - * so we need only do it once. - */ - if (ci == 0) { - jmain->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); - } - /* Duplicate the last real sample row rgroup*2 times; this pads out the - * last partial rowgroup and ensures at least one full rowgroup of context. - */ - xbuf = jmain->xbuffer[jmain->whichptr][ci]; - for (i = 0; i < rgroup * 2; i++) { - xbuf[rows_left + i] = xbuf[rows_left-1]; - } - } -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->upsample->need_context_rows) { - jmain->pub.process_data = process_data_context_main; - make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ - jmain->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ - jmain->context_state = CTX_PREPARE_FOR_IMCU; - jmain->iMCU_row_ctr = 0; - } else { - /* Simple case with no context needed */ - jmain->pub.process_data = process_data_simple_main; - } - jmain->buffer_full = FALSE; /* Mark buffer empty */ - jmain->rowgroup_ctr = 0; - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_CRANK_DEST: - /* For last pass of 2-pass quantization, just crank the postprocessor */ - jmain->pub.process_data = process_data_crank_post; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This handles the simple case where no context is required. - */ - -METHODDEF void -process_data_simple_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - JDIMENSION rowgroups_avail; - - /* Read input data if we haven't filled the main buffer yet */ - if (! jmain->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, jmain->buffer)) - return; /* suspension forced, can do nothing more */ - jmain->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - } - - /* There are always min_DCT_scaled_size row groups in an iMCU row. */ - rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; - /* Note: at the bottom of the image, we may pass extra garbage row groups - * to the postprocessor. The postprocessor has to check for bottom - * of image anyway (at row resolution), so no point in us doing it too. - */ - - /* Feed the postprocessor */ - (*cinfo->post->post_process_data) (cinfo, jmain->buffer, - &jmain->rowgroup_ctr, rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - - /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ - if (jmain->rowgroup_ctr >= rowgroups_avail) { - jmain->buffer_full = FALSE; - jmain->rowgroup_ctr = 0; - } -} - - -/* - * Process some data. - * This handles the case where context rows must be provided. - */ - -METHODDEF void -process_data_context_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - // bk001204 - no use main - my_main_ptr jmain = (my_main_ptr) cinfo->main; - - /* Read input data if we haven't filled the main buffer yet */ - if (! jmain->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, - jmain->xbuffer[jmain->whichptr])) - return; /* suspension forced, can do nothing more */ - jmain->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - jmain->iMCU_row_ctr++; /* count rows received */ - } - - /* Postprocessor typically will not swallow all the input data it is handed - * in one call (due to filling the output buffer first). Must be prepared - * to exit and restart. This switch lets us keep track of how far we got. - * Note that each case falls through to the next on successful completion. - */ - switch (jmain->context_state) { - case CTX_POSTPONED_ROW: - /* Call postprocessor using previously set pointers for postponed row */ - (*cinfo->post->post_process_data) (cinfo, jmain->xbuffer[jmain->whichptr], - &jmain->rowgroup_ctr, jmain->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (jmain->rowgroup_ctr < jmain->rowgroups_avail) - return; /* Need to suspend */ - jmain->context_state = CTX_PREPARE_FOR_IMCU; - if (*out_row_ctr >= out_rows_avail) - return; /* Postprocessor exactly filled output buf */ - /*FALLTHROUGH*/ - case CTX_PREPARE_FOR_IMCU: - /* Prepare to process first M-1 row groups of this iMCU row */ - jmain->rowgroup_ctr = 0; - jmain->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); - /* Check for bottom of image: if so, tweak pointers to "duplicate" - * the last sample row, and adjust rowgroups_avail to ignore padding rows. - */ - if (jmain->iMCU_row_ctr == cinfo->total_iMCU_rows) - set_bottom_pointers(cinfo); - jmain->context_state = CTX_PROCESS_IMCU; - /*FALLTHROUGH*/ - case CTX_PROCESS_IMCU: - /* Call postprocessor using previously set pointers */ - (*cinfo->post->post_process_data) (cinfo, jmain->xbuffer[jmain->whichptr], - &jmain->rowgroup_ctr, jmain->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (jmain->rowgroup_ctr < jmain->rowgroups_avail) - return; /* Need to suspend */ - /* After the first iMCU, change wraparound pointers to normal state */ - if (jmain->iMCU_row_ctr == 1) - set_wraparound_pointers(cinfo); - /* Prepare to load new iMCU row using other xbuffer list */ - jmain->whichptr ^= 1; /* 0=>1 or 1=>0 */ - jmain->buffer_full = FALSE; - /* Still need to process last row group of this iMCU row, */ - /* which is saved at index M+1 of the other xbuffer */ - jmain->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); - jmain->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); - jmain->context_state = CTX_POSTPONED_ROW; - } -} - - -/* - * Process some data. - * Final pass of two-pass quantization: just call the postprocessor. - * Source data will be the postprocessor controller's internal buffer. - */ - -#ifdef QUANT_2PASS_SUPPORTED - -METHODDEF void -process_data_crank_post (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, - (JDIMENSION *) NULL, (JDIMENSION) 0, - output_buf, out_row_ctr, out_rows_avail); -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL void -jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - // bk001204 - no use main - my_main_ptr jmain; - int ci, rgroup, ngroups; - jpeg_component_info *compptr; - - jmain = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_d_main_controller *) jmain; - jmain->pub.start_pass = start_pass_main; - - if (need_full_buffer) /* shouldn't happen */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Allocate the workspace. - * ngroups is the number of row groups we need. - */ - if (cinfo->upsample->need_context_rows) { - if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ - ERREXIT(cinfo, JERR_NOTIMPL); - alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ - ngroups = cinfo->min_DCT_scaled_size + 2; - } else { - ngroups = cinfo->min_DCT_scaled_size; - } - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - jmain->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_scaled_size, - (JDIMENSION) (rgroup * ngroups)); - } -} diff --git a/third_party/jpeg-6/jdmarker.c b/third_party/jpeg-6/jdmarker.c deleted file mode 100644 index da7205e..0000000 --- a/third_party/jpeg-6/jdmarker.c +++ /dev/null @@ -1,1052 +0,0 @@ -/* - * jdmarker.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to decode JPEG datastream markers. - * Most of the complexity arises from our desire to support input - * suspension: if not all of the data for a marker is available, - * we must exit back to the application. On resumption, we reprocess - * the marker. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* - * Macros for fetching data from the data source module. - * - * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect - * the current restart point; we update them only when we have reached a - * suitable place to restart if a suspension occurs. - */ - -/* Declare and initialize local copies of input pointer/count */ -#define INPUT_VARS(cinfo) \ - struct jpeg_source_mgr * datasrc = (cinfo)->src; \ - const JOCTET * next_input_byte = datasrc->next_input_byte; \ - size_t bytes_in_buffer = datasrc->bytes_in_buffer - -/* Unload the local copies --- do this only at a restart boundary */ -#define INPUT_SYNC(cinfo) \ - ( datasrc->next_input_byte = next_input_byte, \ - datasrc->bytes_in_buffer = bytes_in_buffer ) - -/* Reload the local copies --- seldom used except in MAKE_BYTE_AVAIL */ -#define INPUT_RELOAD(cinfo) \ - ( next_input_byte = datasrc->next_input_byte, \ - bytes_in_buffer = datasrc->bytes_in_buffer ) - -/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. - * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, - * but we must reload the local copies after a successful fill. - */ -#define MAKE_BYTE_AVAIL(cinfo,action) \ - if (bytes_in_buffer == 0) { \ - if (! (*datasrc->fill_input_buffer) (cinfo)) \ - { action; } \ - INPUT_RELOAD(cinfo); \ - } \ - bytes_in_buffer-- - -/* Read a byte into variable V. - * If must suspend, take the specified action (typically "return FALSE"). - */ -#define INPUT_BYTE(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - V = GETJOCTET(*next_input_byte++); ) - -/* As above, but read two bytes interpreted as an unsigned 16-bit integer. - * V should be declared unsigned int or perhaps JPEG_INT32. - */ -#define INPUT_2BYTES(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ - MAKE_BYTE_AVAIL(cinfo,action); \ - V += GETJOCTET(*next_input_byte++); ) - - -/* - * Routines to process JPEG markers. - * - * Entry condition: JPEG marker itself has been read and its code saved - * in cinfo->unread_marker; input restart point is just after the marker. - * - * Exit: if return TRUE, have read and processed any parameters, and have - * updated the restart point to point after the parameters. - * If return FALSE, was forced to suspend before reaching end of - * marker parameters; restart point has not been moved. Same routine - * will be called again after application supplies more input data. - * - * This approach to suspension assumes that all of a marker's parameters can - * fit into a single input bufferload. This should hold for "normal" - * markers. Some COM/APPn markers might have large parameter segments, - * but we use skip_input_data to get past those, and thereby put the problem - * on the source manager's shoulders. - * - * Note that we don't bother to avoid duplicate trace messages if a - * suspension occurs within marker parameters. Other side effects - * require more care. - */ - - -LOCAL boolean -get_soi (j_decompress_ptr cinfo) -/* Process an SOI marker */ -{ - int i; - - TRACEMS(cinfo, 1, JTRC_SOI); - - if (cinfo->marker->saw_SOI) - ERREXIT(cinfo, JERR_SOI_DUPLICATE); - - /* Reset all parameters that are defined to be reset by SOI */ - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - cinfo->restart_interval = 0; - - /* Set initial assumptions for colorspace etc */ - - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ - - cinfo->saw_JFIF_marker = FALSE; - cinfo->density_unit = 0; /* set default JFIF APP0 values */ - cinfo->X_density = 1; - cinfo->Y_density = 1; - cinfo->saw_Adobe_marker = FALSE; - cinfo->Adobe_transform = 0; - - cinfo->marker->saw_SOI = TRUE; - - return TRUE; -} - - -LOCAL boolean -get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith) -/* Process a SOFn marker */ -{ - JPEG_INT32 length; - int c, ci; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - cinfo->progressive_mode = is_prog; - cinfo->arith_code = is_arith; - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); - INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); - - length -= 8; - - TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, - (int) cinfo->image_width, (int) cinfo->image_height, - cinfo->num_components); - - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_DUPLICATE); - - /* We don't support files in which the image height is initially specified */ - /* as 0 and is later redefined by DNL. As long as we have to check that, */ - /* might as well have a general sanity check. */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - if (length != (cinfo->num_components * 3)) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - if (cinfo->comp_info == NULL) /* do only once, even if suspend */ - cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * SIZEOF(jpeg_component_info)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->component_index = ci; - INPUT_BYTE(cinfo, compptr->component_id, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - compptr->h_samp_factor = (c >> 4) & 15; - compptr->v_samp_factor = (c ) & 15; - INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); - - TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, - compptr->component_id, compptr->h_samp_factor, - compptr->v_samp_factor, compptr->quant_tbl_no); - } - - cinfo->marker->saw_SOF = TRUE; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_sos (j_decompress_ptr cinfo) -/* Process a SOS marker */ -{ - JPEG_INT32 length; - int i, ci, n, c, cc; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - if (! cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOS_NO_SOF); - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ - - if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - TRACEMS1(cinfo, 1, JTRC_SOS, n); - - cinfo->comps_in_scan = n; - - /* Collect the component-spec parameters */ - - for (i = 0; i < n; i++) { - INPUT_BYTE(cinfo, cc, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (cc == compptr->component_id) - goto id_found; - } - - ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); - - id_found: - - cinfo->cur_comp_info[i] = compptr; - compptr->dc_tbl_no = (c >> 4) & 15; - compptr->ac_tbl_no = (c ) & 15; - - TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, - compptr->dc_tbl_no, compptr->ac_tbl_no); - } - - /* Collect the additional scan parameters Ss, Se, Ah/Al. */ - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ss = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Se = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ah = (c >> 4) & 15; - cinfo->Al = (c ) & 15; - - TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, - cinfo->Ah, cinfo->Al); - - /* Prepare to scan data & restart markers */ - cinfo->marker->next_restart_num = 0; - - /* Count another SOS marker */ - cinfo->input_scan_number++; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -METHODDEF boolean -get_app0 (j_decompress_ptr cinfo) -/* Process an APP0 marker */ -{ -#define JFIF_LEN 14 - JPEG_INT32 length; - UINT8 b[JFIF_LEN]; - int buffp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* See if a JFIF APP0 marker is present */ - - if (length >= JFIF_LEN) { - for (buffp = 0; buffp < JFIF_LEN; buffp++) - INPUT_BYTE(cinfo, b[buffp], return FALSE); - length -= JFIF_LEN; - - if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) { - /* Found JFIF APP0 marker: check version */ - /* Major version must be 1, anything else signals an incompatible change. - * We used to treat this as an error, but now it's a nonfatal warning, - * because some bozo at Hijaak couldn't read the spec. - * Minor version should be 0..2, but process anyway if newer. - */ - if (b[5] != 1) - WARNMS2(cinfo, JWRN_JFIF_MAJOR, b[5], b[6]); - else if (b[6] > 2) - TRACEMS2(cinfo, 1, JTRC_JFIF_MINOR, b[5], b[6]); - /* Save info */ - cinfo->saw_JFIF_marker = TRUE; - cinfo->density_unit = b[7]; - cinfo->X_density = (b[8] << 8) + b[9]; - cinfo->Y_density = (b[10] << 8) + b[11]; - TRACEMS3(cinfo, 1, JTRC_JFIF, - cinfo->X_density, cinfo->Y_density, cinfo->density_unit); - if (b[12] | b[13]) - TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, b[12], b[13]); - if (length != ((JPEG_INT32) b[12] * (JPEG_INT32) b[13] * (JPEG_INT32) 3)) - TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) length); - } else { - /* Start of APP0 does not match "JFIF" */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) length + JFIF_LEN); - } - } else { - /* Too short to be JFIF marker */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) length); - } - - INPUT_SYNC(cinfo); - if (length > 0) /* skip any remaining data -- could be lots */ - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -METHODDEF boolean -get_app14 (j_decompress_ptr cinfo) -/* Process an APP14 marker */ -{ -#define ADOBE_LEN 12 - JPEG_INT32 length; - UINT8 b[ADOBE_LEN]; - int buffp; - unsigned int version, flags0, flags1, transform; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* See if an Adobe APP14 marker is present */ - - if (length >= ADOBE_LEN) { - for (buffp = 0; buffp < ADOBE_LEN; buffp++) - INPUT_BYTE(cinfo, b[buffp], return FALSE); - length -= ADOBE_LEN; - - if (b[0]==0x41 && b[1]==0x64 && b[2]==0x6F && b[3]==0x62 && b[4]==0x65) { - /* Found Adobe APP14 marker */ - version = (b[5] << 8) + b[6]; - flags0 = (b[7] << 8) + b[8]; - flags1 = (b[9] << 8) + b[10]; - transform = b[11]; - TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); - cinfo->saw_Adobe_marker = TRUE; - cinfo->Adobe_transform = (UINT8) transform; - } else { - /* Start of APP14 does not match "Adobe" */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) length + ADOBE_LEN); - } - } else { - /* Too short to be Adobe marker */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) length); - } - - INPUT_SYNC(cinfo); - if (length > 0) /* skip any remaining data -- could be lots */ - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -LOCAL boolean -get_dac (j_decompress_ptr cinfo) -/* Process a DAC marker */ -{ - JPEG_INT32 length; - int index, val; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - INPUT_BYTE(cinfo, val, return FALSE); - - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_DAC, index, val); - - if (index < 0 || index >= (2*NUM_ARITH_TBLS)) - ERREXIT1(cinfo, JERR_DAC_INDEX, index); - - if (index >= NUM_ARITH_TBLS) { /* define AC table */ - cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; - } else { /* define DC table */ - cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); - cinfo->arith_dc_U[index] = (UINT8) (val >> 4); - if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) - ERREXIT1(cinfo, JERR_DAC_VALUE, val); - } - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dht (j_decompress_ptr cinfo) -/* Process a DHT marker */ -{ - JPEG_INT32 length; - UINT8 bits[17]; - UINT8 huffval[256]; - int i, index, count; - JHUFF_TBL **htblptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DHT, index); - - bits[0] = 0; - count = 0; - for (i = 1; i <= 16; i++) { - INPUT_BYTE(cinfo, bits[i], return FALSE); - count += bits[i]; - } - - length -= 1 + 16; - - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[1], bits[2], bits[3], bits[4], - bits[5], bits[6], bits[7], bits[8]); - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[9], bits[10], bits[11], bits[12], - bits[13], bits[14], bits[15], bits[16]); - - if (count > 256 || ((JPEG_INT32) count) > length) - ERREXIT(cinfo, JERR_DHT_COUNTS); - - for (i = 0; i < count; i++) - INPUT_BYTE(cinfo, huffval[i], return FALSE); - - length -= count; - - if (index & 0x10) { /* AC table definition */ - index -= 0x10; - htblptr = &cinfo->ac_huff_tbl_ptrs[index]; - } else { /* DC table definition */ - htblptr = &cinfo->dc_huff_tbl_ptrs[index]; - } - - if (index < 0 || index >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_DHT_INDEX, index); - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dqt (j_decompress_ptr cinfo) -/* Process a DQT marker */ -{ - JPEG_INT32 length; - int n, i, prec; - unsigned int tmp; - JQUANT_TBL *quant_ptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, n, return FALSE); - prec = n >> 4; - n &= 0x0F; - - TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); - - if (n >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, n); - - if (cinfo->quant_tbl_ptrs[n] == NULL) - cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); - quant_ptr = cinfo->quant_tbl_ptrs[n]; - - for (i = 0; i < DCTSIZE2; i++) { - if (prec) - INPUT_2BYTES(cinfo, tmp, return FALSE); - else - INPUT_BYTE(cinfo, tmp, return FALSE); - quant_ptr->quantval[i] = (UINT16) tmp; - } - - for (i = 0; i < DCTSIZE2; i += 8) { - TRACEMS8(cinfo, 2, JTRC_QUANTVALS, - quant_ptr->quantval[i ], quant_ptr->quantval[i+1], - quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], - quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], - quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); - } - - length -= DCTSIZE2+1; - if (prec) length -= DCTSIZE2; - } - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -get_dri (j_decompress_ptr cinfo) -/* Process a DRI marker */ -{ - JPEG_INT32 length; - unsigned int tmp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - if (length != 4) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_2BYTES(cinfo, tmp, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DRI, tmp); - - cinfo->restart_interval = tmp; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -METHODDEF boolean -skip_variable (j_decompress_ptr cinfo) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - JPEG_INT32 length; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); - - INPUT_SYNC(cinfo); /* do before skip_input_data */ - (*cinfo->src->skip_input_data) (cinfo, (long) length - 2L); - - return TRUE; -} - - -/* - * Find the next JPEG marker, save it in cinfo->unread_marker. - * Returns FALSE if had to suspend before reaching a marker; - * in that case cinfo->unread_marker is unchanged. - * - * Note that the result might not be a valid marker code, - * but it will never be 0 or FF. - */ - -LOCAL boolean -next_marker (j_decompress_ptr cinfo) -{ - int c; - INPUT_VARS(cinfo); - - for (;;) { - INPUT_BYTE(cinfo, c, return FALSE); - /* Skip any non-FF bytes. - * This may look a bit inefficient, but it will not occur in a valid file. - * We sync after each discarded byte so that a suspending data source - * can discard the byte from its buffer. - */ - while (c != 0xFF) { - cinfo->marker->discarded_bytes++; - INPUT_SYNC(cinfo); - INPUT_BYTE(cinfo, c, return FALSE); - } - /* This loop swallows any duplicate FF bytes. Extra FFs are legal as - * pad bytes, so don't count them in discarded_bytes. We assume there - * will not be so many consecutive FF bytes as to overflow a suspending - * data source's input buffer. - */ - do { - INPUT_BYTE(cinfo, c, return FALSE); - } while (c == 0xFF); - if (c != 0) - break; /* found a valid marker, exit loop */ - /* Reach here if we found a stuffed-zero data sequence (FF/00). - * Discard it and loop back to try again. - */ - cinfo->marker->discarded_bytes += 2; - INPUT_SYNC(cinfo); - } - - if (cinfo->marker->discarded_bytes != 0) { - WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); - cinfo->marker->discarded_bytes = 0; - } - - cinfo->unread_marker = c; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL boolean -first_marker (j_decompress_ptr cinfo) -/* Like next_marker, but used to obtain the initial SOI marker. */ -/* For this marker, we do not allow preceding garbage or fill; otherwise, - * we might well scan an entire input file before realizing it ain't JPEG. - * If an application wants to process non-JFIF files, it must seek to the - * SOI before calling the JPEG library. - */ -{ - int c, c2; - INPUT_VARS(cinfo); - - INPUT_BYTE(cinfo, c, return FALSE); - INPUT_BYTE(cinfo, c2, return FALSE); - if (c != 0xFF || c2 != (int) M_SOI) - ERREXIT2(cinfo, JERR_NO_SOI, c, c2); - - cinfo->unread_marker = c2; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Read markers until SOS or EOI. - * - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - -METHODDEF int -read_markers (j_decompress_ptr cinfo) -{ - /* Outer loop repeats once for each marker. */ - for (;;) { - /* Collect the marker proper, unless we already did. */ - /* NB: first_marker() enforces the requirement that SOI appear first. */ - if (cinfo->unread_marker == 0) { - if (! cinfo->marker->saw_SOI) { - if (! first_marker(cinfo)) - return JPEG_SUSPENDED; - } else { - if (! next_marker(cinfo)) - return JPEG_SUSPENDED; - } - } - /* At this point cinfo->unread_marker contains the marker code and the - * input point is just past the marker proper, but before any parameters. - * A suspension will cause us to return with this state still true. - */ - switch (cinfo->unread_marker) { - case M_SOI: - if (! get_soi(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - if (! get_sof(cinfo, FALSE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF2: /* Progressive, Huffman */ - if (! get_sof(cinfo, TRUE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF9: /* Extended sequential, arithmetic */ - if (! get_sof(cinfo, FALSE, TRUE)) - return JPEG_SUSPENDED; - break; - - case M_SOF10: /* Progressive, arithmetic */ - if (! get_sof(cinfo, TRUE, TRUE)) - return JPEG_SUSPENDED; - break; - - /* Currently unsupported SOFn types */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_JPG: /* Reserved for JPEG extensions */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); - break; - - case M_SOS: - if (! get_sos(cinfo)) - return JPEG_SUSPENDED; - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_SOS; - - case M_EOI: - TRACEMS(cinfo, 1, JTRC_EOI); - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_EOI; - - case M_DAC: - if (! get_dac(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DHT: - if (! get_dht(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DQT: - if (! get_dqt(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DRI: - if (! get_dri(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_APP0: - case M_APP1: - case M_APP2: - case M_APP3: - case M_APP4: - case M_APP5: - case M_APP6: - case M_APP7: - case M_APP8: - case M_APP9: - case M_APP10: - case M_APP11: - case M_APP12: - case M_APP13: - case M_APP14: - case M_APP15: - if (! (*cinfo->marker->process_APPn[cinfo->unread_marker - (int) M_APP0]) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_COM: - if (! (*cinfo->marker->process_COM) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_RST0: /* these are all parameterless */ - case M_RST1: - case M_RST2: - case M_RST3: - case M_RST4: - case M_RST5: - case M_RST6: - case M_RST7: - case M_TEM: - TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); - break; - - case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ - if (! skip_variable(cinfo)) - return JPEG_SUSPENDED; - break; - - default: /* must be DHP, EXP, JPGn, or RESn */ - /* For now, we treat the reserved markers as fatal errors since they are - * likely to be used to signal incompatible JPEG Part 3 extensions. - * Once the JPEG 3 version-number marker is well defined, this code - * ought to change! - */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - /* Successfully processed marker, so reset state variable */ - cinfo->unread_marker = 0; - } /* end loop */ -} - - -/* - * Read a restart marker, which is expected to appear next in the datastream; - * if the marker is not there, take appropriate recovery action. - * Returns FALSE if suspension is required. - * - * This is called by the entropy decoder after it has read an appropriate - * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder - * has already read a marker from the data source. Under normal conditions - * cinfo->unread_marker will be reset to 0 before returning; if not reset, - * it holds a marker which the decoder will be unable to read past. - */ - -METHODDEF boolean -read_restart_marker (j_decompress_ptr cinfo) -{ - /* Obtain a marker unless we already did. */ - /* Note that next_marker will complain if it skips any data. */ - if (cinfo->unread_marker == 0) { - if (! next_marker(cinfo)) - return FALSE; - } - - if (cinfo->unread_marker == - ((int) M_RST0 + cinfo->marker->next_restart_num)) { - /* Normal case --- swallow the marker and let entropy decoder continue */ - TRACEMS1(cinfo, 2, JTRC_RST, cinfo->marker->next_restart_num); - cinfo->unread_marker = 0; - } else { - /* Uh-oh, the restart markers have been messed up. */ - /* Let the data source manager determine how to resync. */ - if (! (*cinfo->src->resync_to_restart) (cinfo, - cinfo->marker->next_restart_num)) - return FALSE; - } - - /* Update next-restart state */ - cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; - - return TRUE; -} - - -/* - * This is the default resync_to_restart method for data source managers - * to use if they don't have any better approach. Some data source managers - * may be able to back up, or may have additional knowledge about the data - * which permits a more intelligent recovery strategy; such managers would - * presumably supply their own resync method. - * - * read_restart_marker calls resync_to_restart if it finds a marker other than - * the restart marker it was expecting. (This code is *not* used unless - * a nonzero restart interval has been declared.) cinfo->unread_marker is - * the marker code actually found (might be anything, except 0 or FF). - * The desired restart marker number (0..7) is passed as a parameter. - * This routine is supposed to apply whatever error recovery strategy seems - * appropriate in order to position the input stream to the next data segment. - * Note that cinfo->unread_marker is treated as a marker appearing before - * the current data-source input point; usually it should be reset to zero - * before returning. - * Returns FALSE if suspension is required. - * - * This implementation is substantially constrained by wanting to treat the - * input as a data stream; this means we can't back up. Therefore, we have - * only the following actions to work with: - * 1. Simply discard the marker and let the entropy decoder resume at next - * byte of file. - * 2. Read forward until we find another marker, discarding intervening - * data. (In theory we could look ahead within the current bufferload, - * without having to discard data if we don't find the desired marker. - * This idea is not implemented here, in part because it makes behavior - * dependent on buffer size and chance buffer-boundary positions.) - * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). - * This will cause the entropy decoder to process an empty data segment, - * inserting dummy zeroes, and then we will reprocess the marker. - * - * #2 is appropriate if we think the desired marker lies ahead, while #3 is - * appropriate if the found marker is a future restart marker (indicating - * that we have missed the desired restart marker, probably because it got - * corrupted). - * We apply #2 or #3 if the found marker is a restart marker no more than - * two counts behind or ahead of the expected one. We also apply #2 if the - * found marker is not a legal JPEG marker code (it's certainly bogus data). - * If the found marker is a restart marker more than 2 counts away, we do #1 - * (too much risk that the marker is erroneous; with luck we will be able to - * resync at some future point). - * For any valid non-restart JPEG marker, we apply #3. This keeps us from - * overrunning the end of a scan. An implementation limited to single-scan - * files might find it better to apply #2 for markers other than EOI, since - * any other marker would have to be bogus data in that case. - */ - -GLOBAL boolean -jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) -{ - int marker = cinfo->unread_marker; - int action = 1; - - /* Always put up a warning. */ - WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); - - /* Outer loop handles repeated decision after scanning forward. */ - for (;;) { - if (marker < (int) M_SOF0) - action = 2; /* invalid marker */ - else if (marker < (int) M_RST0 || marker > (int) M_RST7) - action = 3; /* valid non-restart marker */ - else { - if (marker == ((int) M_RST0 + ((desired+1) & 7)) || - marker == ((int) M_RST0 + ((desired+2) & 7))) - action = 3; /* one of the next two expected restarts */ - else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || - marker == ((int) M_RST0 + ((desired-2) & 7))) - action = 2; /* a prior restart, so advance */ - else - action = 1; /* desired restart or too far away */ - } - TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); - switch (action) { - case 1: - /* Discard marker and let entropy decoder resume processing. */ - cinfo->unread_marker = 0; - return TRUE; - case 2: - /* Scan to the next marker, and repeat the decision loop. */ - if (! next_marker(cinfo)) - return FALSE; - marker = cinfo->unread_marker; - break; - case 3: - /* Return without advancing past this marker. */ - /* Entropy decoder will be forced to process an empty segment. */ - return TRUE; - } - } /* end loop */ -} - - -/* - * Reset marker processing state to begin a fresh datastream. - */ - -METHODDEF void -reset_marker_reader (j_decompress_ptr cinfo) -{ - cinfo->comp_info = NULL; /* until allocated by get_sof */ - cinfo->input_scan_number = 0; /* no SOS seen yet */ - cinfo->unread_marker = 0; /* no pending marker */ - cinfo->marker->saw_SOI = FALSE; /* set internal state too */ - cinfo->marker->saw_SOF = FALSE; - cinfo->marker->discarded_bytes = 0; -} - - -/* - * Initialize the marker reader module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL void -jinit_marker_reader (j_decompress_ptr cinfo) -{ - int i; - - /* Create subobject in permanent pool */ - cinfo->marker = (struct jpeg_marker_reader *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(struct jpeg_marker_reader)); - /* Initialize method pointers */ - cinfo->marker->reset_marker_reader = reset_marker_reader; - cinfo->marker->read_markers = read_markers; - cinfo->marker->read_restart_marker = read_restart_marker; - cinfo->marker->process_COM = skip_variable; - for (i = 0; i < 16; i++) - cinfo->marker->process_APPn[i] = skip_variable; - cinfo->marker->process_APPn[0] = get_app0; - cinfo->marker->process_APPn[14] = get_app14; - /* Reset marker processing state */ - reset_marker_reader(cinfo); -} diff --git a/third_party/jpeg-6/jdmaster.c b/third_party/jpeg-6/jdmaster.c deleted file mode 100644 index 18e0880..0000000 --- a/third_party/jpeg-6/jdmaster.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * jdmaster.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG decompressor. - * These routines are concerned with selecting the modules to be executed - * and with determining the number of passes and the work to be done in each - * pass. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_decomp_master pub; /* public fields */ - - int pass_number; /* # of passes completed */ - - boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ - - /* Saved references to initialized quantizer modules, - * in case we need to switch modes. - */ - struct jpeg_color_quantizer * quantizer_1pass; - struct jpeg_color_quantizer * quantizer_2pass; -} my_decomp_master; - -typedef my_decomp_master * my_master_ptr; - - -/* - * Determine whether merged upsample/color conversion should be used. - * CRUCIAL: this must match the actual capabilities of jdmerge.c! - */ - -LOCAL boolean -use_merged_upsample (j_decompress_ptr cinfo) -{ -#ifdef UPSAMPLE_MERGING_SUPPORTED - /* Merging is the equivalent of plain box-filter upsampling */ - if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) - return FALSE; - /* jdmerge.c only supports YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || - cinfo->out_color_space != JCS_RGB || - cinfo->out_color_components != RGB_PIXELSIZE) - return FALSE; - /* and it only handles 2h1v or 2h2v sampling ratios */ - if (cinfo->comp_info[0].h_samp_factor != 2 || - cinfo->comp_info[1].h_samp_factor != 1 || - cinfo->comp_info[2].h_samp_factor != 1 || - cinfo->comp_info[0].v_samp_factor > 2 || - cinfo->comp_info[1].v_samp_factor != 1 || - cinfo->comp_info[2].v_samp_factor != 1) - return FALSE; - /* furthermore, it doesn't work if we've scaled the IDCTs differently */ - if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) - return FALSE; - /* ??? also need to test for upsample-time rescaling, when & if supported */ - return TRUE; /* by golly, it'll work... */ -#else - return FALSE; -#endif -} - - -/* - * Compute output image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - * Also note that it may be called before the master module is initialized! - */ - -GLOBAL void -jpeg_calc_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ -#if 0 // JDC: commented out to remove warning - int ci; - jpeg_component_info *compptr; -#endif - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_READY) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - -#ifdef IDCT_SCALING_SUPPORTED - - /* Compute actual output image dimensions and DCT scaling choices. */ - if (cinfo->scale_num * 8 <= cinfo->scale_denom) { - /* Provide 1/8 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 8L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 8L); - cinfo->min_DCT_scaled_size = 1; - } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { - /* Provide 1/4 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 4L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 4L); - cinfo->min_DCT_scaled_size = 2; - } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { - /* Provide 1/2 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 2L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 2L); - cinfo->min_DCT_scaled_size = 4; - } else { - /* Provide 1/1 scaling */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - cinfo->min_DCT_scaled_size = DCTSIZE; - } - /* In selecting the actual DCT scaling for each component, we try to - * scale up the chroma components via IDCT scaling rather than upsampling. - * This saves time if the upsampler gets to use 1:1 scaling. - * Note this code assumes that the supported DCT scalings are powers of 2. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - int ssize = cinfo->min_DCT_scaled_size; - while (ssize < DCTSIZE && - (compptr->h_samp_factor * ssize * 2 <= - cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && - (compptr->v_samp_factor * ssize * 2 <= - cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { - ssize = ssize * 2; - } - compptr->DCT_scaled_size = ssize; - } - - /* Recompute downsampled dimensions of components; - * application needs to know these if using raw downsampled data. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Size in samples, after IDCT scaling */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * - (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * - (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - } - -#else /* !IDCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, - * and has computed unscaled downsampled_width and downsampled_height. - */ - -#endif /* IDCT_SCALING_SUPPORTED */ - - /* Report number of components in selected colorspace. */ - /* Probably this should be in the color conversion module... */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - break; - case JCS_RGB: -#if RGB_PIXELSIZE != 3 - cinfo->out_color_components = RGB_PIXELSIZE; - break; -#endif /* else share code with YCbCr */ - case JCS_YCbCr: - cinfo->out_color_components = 3; - break; - case JCS_CMYK: - case JCS_YCCK: - cinfo->out_color_components = 4; - break; - default: /* else must be same colorspace as in file */ - cinfo->out_color_components = cinfo->num_components; - break; - } - cinfo->output_components = (cinfo->quantize_colors ? 1 : - cinfo->out_color_components); - - /* See if upsampler will want to emit more than one row at a time */ - if (use_merged_upsample(cinfo)) - cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; - else - cinfo->rec_outbuf_height = 1; -} - - -/* - * Several decompression processes need to range-limit values to the range - * 0..MAXJSAMPLE; the input value may fall somewhat outside this range - * due to noise introduced by quantization, roundoff error, etc. These - * processes are inner loops and need to be as fast as possible. On most - * machines, particularly CPUs with pipelines or instruction prefetch, - * a (subscript-check-less) C table lookup - * x = sample_range_limit[x]; - * is faster than explicit tests - * if (x < 0) x = 0; - * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; - * These processes all use a common table prepared by the routine below. - * - * For most steps we can mathematically guarantee that the initial value - * of x is within MAXJSAMPLE+1 of the legal range, so a table running from - * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial - * limiting step (just after the IDCT), a wildly out-of-range value is - * possible if the input data is corrupt. To avoid any chance of indexing - * off the end of memory and getting a bad-pointer trap, we perform the - * post-IDCT limiting thus: - * x = range_limit[x & MASK]; - * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit - * samples. Under normal circumstances this is more than enough range and - * a correct output will be generated; with bogus input data the mask will - * cause wraparound, and we will safely generate a bogus-but-in-range output. - * For the post-IDCT step, we want to convert the data from signed to unsigned - * representation by adding CENTERJSAMPLE at the same time that we limit it. - * So the post-IDCT limiting table ends up looking like this: - * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, - * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0,1,...,CENTERJSAMPLE-1 - * Negative inputs select values from the upper half of the table after - * masking. - * - * We can save some space by overlapping the start of the post-IDCT table - * with the simpler range limiting table. The post-IDCT table begins at - * sample_range_limit + CENTERJSAMPLE. - * - * Note that the table is allocated in near data space on PCs; it's small - * enough and used often enough to justify this. - */ - -LOCAL void -prepare_range_limit_table (j_decompress_ptr cinfo) -/* Allocate and fill in the sample_range_limit table */ -{ - JSAMPLE * table; - int i; - - table = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ - cinfo->sample_range_limit = table; - /* First segment of "simple" table: limit[x] = 0 for x < 0 */ - MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); - /* Main part of "simple" table: limit[x] = x */ - for (i = 0; i <= MAXJSAMPLE; i++) - table[i] = (JSAMPLE) i; - table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ - /* End of simple table, rest of first half of post-IDCT table */ - for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) - table[i] = MAXJSAMPLE; - /* Second half of post-IDCT table */ - MEMZERO(table + (2 * (MAXJSAMPLE+1)), - (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), - cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); -} - - -/* - * Master selection of decompression modules. - * This is done once at jpeg_start_decompress time. We determine - * which modules will be used and give them appropriate initialization calls. - * We also initialize the decompressor input side to begin consuming data. - * - * Since jpeg_read_header has finished, we know what is in the SOF - * and (first) SOS markers. We also have all the application parameter - * settings. - */ - -LOCAL void -master_selection (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - boolean use_c_buffer; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Initialize dimensions and other stuff */ - jpeg_calc_output_dimensions(cinfo); - prepare_range_limit_table(cinfo); - - /* Width of an output scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* Initialize my private state */ - master->pass_number = 0; - master->using_merged_upsample = use_merged_upsample(cinfo); - - /* Color quantizer selection */ - master->quantizer_1pass = NULL; - master->quantizer_2pass = NULL; - /* No mode changes if not using buffered-image mode. */ - if (! cinfo->quantize_colors || ! cinfo->buffered_image) { - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - } - if (cinfo->quantize_colors) { - if (cinfo->raw_data_out) - ERREXIT(cinfo, JERR_NOTIMPL); - /* 2-pass quantizer only works in 3-component color space. */ - if (cinfo->out_color_components != 3) { - cinfo->enable_1pass_quant = TRUE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - cinfo->colormap = NULL; - } else if (cinfo->colormap != NULL) { - cinfo->enable_external_quant = TRUE; - } else if (cinfo->two_pass_quantize) { - cinfo->enable_2pass_quant = TRUE; - } else { - cinfo->enable_1pass_quant = TRUE; - } - - if (cinfo->enable_1pass_quant) { -#ifdef QUANT_1PASS_SUPPORTED - jinit_1pass_quantizer(cinfo); - master->quantizer_1pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - /* We use the 2-pass code to map to external colormaps. */ - if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { -#ifdef QUANT_2PASS_SUPPORTED - jinit_2pass_quantizer(cinfo); - master->quantizer_2pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - /* If both quantizers are initialized, the 2-pass one is left active; - * this is necessary for starting with quantization to an external map. - */ - } - - /* Post-processing: in particular, color conversion first */ - if (! cinfo->raw_data_out) { - if (master->using_merged_upsample) { -#ifdef UPSAMPLE_MERGING_SUPPORTED - jinit_merged_upsampler(cinfo); /* does color conversion too */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - jinit_color_deconverter(cinfo); - jinit_upsampler(cinfo); - } - jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); - } - /* Inverse DCT */ - jinit_inverse_dct(cinfo); - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); - } - - /* Initialize principal buffer controllers. */ - use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; - jinit_d_coef_controller(cinfo, use_c_buffer); - - if (! cinfo->raw_data_out) - jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* If jpeg_start_decompress will read the whole file, initialize - * progress monitoring appropriately. The input step is counted - * as one pass. - */ - if (cinfo->progress != NULL && ! cinfo->buffered_image && - cinfo->inputctl->has_multiple_scans) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); - /* Count the input pass as done */ - master->pass_number++; - } -#endif /* D_MULTISCAN_FILES_SUPPORTED */ -} - - -/* - * Per-pass setup. - * This is called at the beginning of each output pass. We determine which - * modules will be active during this pass and give them appropriate - * start_pass calls. We also set is_dummy_pass to indicate whether this - * is a "real" output pass or a dummy pass for color quantization. - * (In the latter case, jdapi.c will crank the pass to completion.) - */ - -METHODDEF void -prepare_for_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (master->pub.is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Final pass of 2-pass quantization */ - master->pub.is_dummy_pass = FALSE; - (*cinfo->cquantize->start_pass) (cinfo, FALSE); - (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); - (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - if (cinfo->quantize_colors && cinfo->colormap == NULL) { - /* Select new quantization method */ - if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { - cinfo->cquantize = master->quantizer_2pass; - master->pub.is_dummy_pass = TRUE; - } else if (cinfo->enable_1pass_quant) { - cinfo->cquantize = master->quantizer_1pass; - } else { - ERREXIT(cinfo, JERR_MODE_CHANGE); - } - } - (*cinfo->idct->start_pass) (cinfo); - (*cinfo->coef->start_output_pass) (cinfo); - if (! cinfo->raw_data_out) { - if (! master->using_merged_upsample) - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->upsample->start_pass) (cinfo); - if (cinfo->quantize_colors) - (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); - (*cinfo->post->start_pass) (cinfo, - (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - } - } - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->pass_number + - (master->pub.is_dummy_pass ? 2 : 1); - /* In buffered-image mode, we assume one more output pass if EOI not - * yet reached, but no more passes if EOI has been reached. - */ - if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { - cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); - } - } -} - - -/* - * Finish up at end of an output pass. - */ - -METHODDEF void -finish_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (cinfo->quantize_colors) - (*cinfo->cquantize->finish_pass) (cinfo); - master->pass_number++; -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Switch to a new external colormap between output passes. - */ - -GLOBAL void -jpeg_new_colormap (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_BUFIMAGE) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (cinfo->quantize_colors && cinfo->enable_external_quant && - cinfo->colormap != NULL) { - /* Select 2-pass quantizer for external colormap use */ - cinfo->cquantize = master->quantizer_2pass; - /* Notify quantizer of colormap change */ - (*cinfo->cquantize->new_color_map) (cinfo); - master->pub.is_dummy_pass = FALSE; /* just in case */ - } else - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -/* - * Initialize master decompression control and select active modules. - * This is performed at the start of jpeg_start_decompress. - */ - -GLOBAL void -jinit_master_decompress (j_decompress_ptr cinfo) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_decomp_master)); - cinfo->master = (struct jpeg_decomp_master *) master; - master->pub.prepare_for_output_pass = prepare_for_output_pass; - master->pub.finish_output_pass = finish_output_pass; - - master->pub.is_dummy_pass = FALSE; - - master_selection(cinfo); -} diff --git a/third_party/jpeg-6/jdmerge.c b/third_party/jpeg-6/jdmerge.c deleted file mode 100644 index 95585fb..0000000 --- a/third_party/jpeg-6/jdmerge.c +++ /dev/null @@ -1,400 +0,0 @@ -/* - * jdmerge.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains code for merged upsampling/color conversion. - * - * This file combines functions from jdsample.c and jdcolor.c; - * read those files first to understand what's going on. - * - * When the chroma components are to be upsampled by simple replication - * (ie, box filtering), we can save some work in color conversion by - * calculating all the output pixels corresponding to a pair of chroma - * samples at one time. In the conversion equations - * R = Y + K1 * Cr - * G = Y + K2 * Cb + K3 * Cr - * B = Y + K4 * Cb - * only the Y term varies among the group of pixels corresponding to a pair - * of chroma samples, so the rest of the terms can be calculated just once. - * At typical sampling ratios, this eliminates half or three-quarters of the - * multiplications needed for color conversion. - * - * This file currently provides implementations for the following cases: - * YCbCr => RGB color conversion only. - * Sampling ratios of 2h1v or 2h2v. - * No scaling needed at upsample time. - * Corner-aligned (non-CCIR601) sampling alignment. - * Other special cases could be added, but in most applications these are - * the only common cases. (For uncommon cases we fall back on the more - * general code in jdsample.c and jdcolor.c.) - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef UPSAMPLE_MERGING_SUPPORTED - - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Pointer to routine to do actual upsampling/conversion of one row group */ - JMETHOD(void, upmethod, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf)); - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ - - /* For 2:1 vertical sampling, we produce two output rows at a time. - * We need a "spare" row buffer to hold the second output row if the - * application provides just a one-row buffer; we also use the spare - * to discard the dummy last row if the image height is odd. - */ - JSAMPROW spare_row; - boolean spare_full; /* T if spare buffer is occupied */ - - JDIMENSION out_row_width; /* samples per output row */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. - * This is taken directly from jdcolor.c; see that file for more info. - */ - -LOCAL void -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int i; - INT32 x; - SHIFT_TEMPS - - upsample->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - upsample->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - upsample->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - upsample->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF void -start_pass_merged_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the spare buffer empty */ - upsample->spare_full = FALSE; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * The control routine just handles the row buffering considerations. - */ - -METHODDEF void -merged_2v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 2:1 vertical sampling case: may need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW work_ptrs[2]; - JDIMENSION num_rows; /* number of rows returned to caller */ - - if (upsample->spare_full) { - /* If we have a spare row saved from a previous cycle, just return it. */ - jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, - 1, upsample->out_row_width); - num_rows = 1; - upsample->spare_full = FALSE; - } else { - /* Figure number of rows to return to caller. */ - num_rows = 2; - /* Not more than the distance to the end of the image. */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - /* Create output pointer array for upsampler. */ - work_ptrs[0] = output_buf[*out_row_ctr]; - if (num_rows > 1) { - work_ptrs[1] = output_buf[*out_row_ctr + 1]; - } else { - work_ptrs[1] = upsample->spare_row; - upsample->spare_full = TRUE; - } - /* Now do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); - } - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (! upsample->spare_full) - (*in_row_group_ctr)++; -} - - -METHODDEF void -merged_1v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 1:1 vertical sampling case: much easier, never need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Just do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, - output_buf + *out_row_ctr); - /* Adjust counts */ - (*out_row_ctr)++; - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by the control routines to do - * the actual upsampling/conversion. One row group is processed per call. - * - * Note: since we may be writing directly into application-supplied buffers, - * we have to be honest about the output width; we can't assume the buffer - * has been rounded up to an even width. - */ - - -/* - * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. - */ - -METHODDEF void -h2v1_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr; - JSAMPROW inptr0, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - SHIFT_TEMPS - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - /* Loop for each pair of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 2 Y values and emit 2 pixels */ - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += RGB_PIXELSIZE; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr0); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - } -} - - -/* - * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. - */ - -METHODDEF void -h2v2_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - SHIFT_TEMPS - - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - /* Loop for each group of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 4 Y values and emit 4 pixels */ - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += RGB_PIXELSIZE; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += RGB_PIXELSIZE; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr00); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - y = GETJSAMPLE(*inptr01); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - } -} - - -/* - * Module initialization routine for merged upsampling/color conversion. - * - * NB: this is called under the conditions determined by use_merged_upsample() - * in jdmaster.c. That routine MUST correspond to the actual capabilities - * of this module; no safety checks are made here. - */ - -GLOBAL void -jinit_merged_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_merged_upsample; - upsample->pub.need_context_rows = FALSE; - - upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; - - if (cinfo->max_v_samp_factor == 2) { - upsample->pub.upsample = merged_2v_upsample; - upsample->upmethod = h2v2_merged_upsample; - /* Allocate a spare row buffer */ - upsample->spare_row = (JSAMPROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); - } else { - upsample->pub.upsample = merged_1v_upsample; - upsample->upmethod = h2v1_merged_upsample; - /* No spare row needed */ - upsample->spare_row = NULL; - } - - build_ycc_rgb_table(cinfo); -} - -#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/third_party/jpeg-6/jdphuff.c b/third_party/jpeg-6/jdphuff.c deleted file mode 100644 index 025bfd8..0000000 --- a/third_party/jpeg-6/jdphuff.c +++ /dev/null @@ -1,642 +0,0 @@ -/* - * jdphuff.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines for progressive JPEG. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdhuff.c */ - - -#ifdef D_PROGRESSIVE_SUPPORTED - -/* - * Expanded entropy decoder object for progressive Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).EOBRUN = (src).EOBRUN, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ -} phuff_entropy_decoder; - -typedef phuff_entropy_decoder * phuff_entropy_ptr; - -/* Forward declarations */ -METHODDEF boolean decode_mcu_DC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean decode_mcu_AC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean decode_mcu_DC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF boolean decode_mcu_AC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); - - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF void -start_pass_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band, bad; - int ci, coefi, tbl; - int *coef_bit_ptr; - jpeg_component_info * compptr; - - is_DC_band = (cinfo->Ss == 0); - - /* Validate scan parameters */ - bad = FALSE; - if (is_DC_band) { - if (cinfo->Se != 0) - bad = TRUE; - } else { - /* need not check Ss/Se < 0 since they came from unsigned bytes */ - if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2) - bad = TRUE; - /* AC scans may have only one component */ - if (cinfo->comps_in_scan != 1) - bad = TRUE; - } - if (cinfo->Ah != 0) { - /* Successive approximation refinement scan: must have Al = Ah-1. */ - if (cinfo->Al != cinfo->Ah-1) - bad = TRUE; - } - if (cinfo->Al > 13) /* need not check for < 0 */ - bad = TRUE; - if (bad) - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - /* Update progression status, and verify that scan order is legal. - * Note that inter-scan inconsistencies are treated as warnings - * not fatal errors ... not clear if this is right way to behave. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - int cindex = cinfo->cur_comp_info[ci]->component_index; - coef_bit_ptr = & cinfo->coef_bits[cindex][0]; - if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); - for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { - int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; - if (cinfo->Ah != expected) - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); - coef_bit_ptr[coefi] = cinfo->Al; - } - } - - /* Select MCU decoding routine */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_first; - else - entropy->pub.decode_mcu = decode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_refine; - else - entropy->pub.decode_mcu = decode_mcu_AC_refine; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Make sure requested tables are present, and compute derived tables. - * We may build same derived table more than once, but it's not expensive. - */ - if (is_DC_band) { - if (cinfo->Ah == 0) { /* DC refinement needs no table */ - tbl = compptr->dc_tbl_no; - if (tbl < 0 || tbl >= NUM_HUFF_TBLS || - cinfo->dc_huff_tbl_ptrs[tbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl], - & entropy->derived_tbls[tbl]); - } - } else { - tbl = compptr->ac_tbl_no; - if (tbl < 0 || tbl >= NUM_HUFF_TBLS || - cinfo->ac_huff_tbl_ptrs[tbl] == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl], - & entropy->derived_tbls[tbl]); - /* remember the single active table */ - entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->bitstate.printed_eod = FALSE; - - /* Initialize private state variables */ - entropy->saved.EOBRUN = 0; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL boolean -process_restart (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Re-init EOB run count, too */ - entropy->saved.EOBRUN = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Next segment can get another out-of-data warning */ - entropy->bitstate.printed_eod = FALSE; - - return TRUE; -} - - -/* - * Huffman MCU decoding. - * Each of these routines decodes and returns one MCU's worth of - * Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. - * - * We return FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * spectral selection, since we'll just re-assign them on the next call. - * Successive approximation AC refinement has to be more careful, however.) - */ - -/* - * MCU decoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF boolean -decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Al = cinfo->Al; - register int s, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * tbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - tbl = entropy->derived_tbls[compptr->dc_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, tbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ - (*block)[0] = (JCOEF) (s << Al); - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF boolean -decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int Al = cinfo->Al; - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state. - * We can avoid loading/saving bitread state if in an EOB run. - */ - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */ - - /* There is always only one block per MCU */ - - if (EOBRUN > 0) /* if it's a band of zeroes... */ - EOBRUN--; /* ...process it now (we do nothing) */ - else { - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - for (k = cinfo->Ss; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, return FALSE, label2); - r = s >> 4; - s &= 15; - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Scale and output coefficient in natural (dezigzagged) order */ - (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al); - } else { - if (r == 15) { /* ZRL */ - k += 15; /* skip 15 zeroes in band */ - } else { /* EOBr, run length is 2^r + appended bits */ - EOBRUN = 1 << r; - if (r) { /* EOBr, r > 0 */ - CHECK_BIT_BUFFER(br_state, r, return FALSE); - r = GET_BITS(r); - EOBRUN += r; - } - EOBRUN--; /* this band is processed at this moment */ - break; /* force end-of-band */ - } - } - } - - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - } - - /* Completed MCU, so update state */ - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */ - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF boolean -decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int blkn; - JBLOCKROW block; - BITREAD_STATE_VARS; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* Encoded data is simply the next bit of the two's-complement DC value */ - CHECK_BIT_BUFFER(br_state, 1, return FALSE); - if (GET_BITS(1)) - (*block)[0] |= p1; - /* Note: since we use |=, repeating the assignment later is safe */ - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC successive approximation refinement scan. - */ - -METHODDEF boolean -decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - JCOEFPTR thiscoef; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - int num_newnz; - int newnz_pos[DCTSIZE2]; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */ - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - /* If we are forced to suspend, we must undo the assignments to any newly - * nonzero coefficients in the block, because otherwise we'd get confused - * next time about which coefficients were already nonzero. - * But we need not undo addition of bits to already-nonzero coefficients; - * instead, we can test the current bit position to see if we already did it. - */ - num_newnz = 0; - - /* initialize coefficient loop counter to start of band */ - k = cinfo->Ss; - - if (EOBRUN == 0) { - for (; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, goto undoit, label3); - r = s >> 4; - s &= 15; - if (s) { - if (s != 1) /* size of new coef should always be 1 */ - WARNMS(cinfo, JWRN_HUFF_BAD_CODE); - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) - s = p1; /* newly nonzero coef is positive */ - else - s = m1; /* newly nonzero coef is negative */ - } else { - if (r != 15) { - EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ - if (r) { - CHECK_BIT_BUFFER(br_state, r, goto undoit); - r = GET_BITS(r); - EOBRUN += r; - } - break; /* rest of block is handled by EOB logic */ - } - /* note s = 0 for processing ZRL */ - } - /* Advance over already-nonzero coefs and r still-zero coefs, - * appending correction bits to the nonzeroes. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - do { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } else { - if (--r < 0) - break; /* reached target zero coefficient */ - } - k++; - } while (k <= Se); - if (s) { - int pos = jpeg_natural_order[k]; - /* Output newly nonzero coefficient */ - (*block)[pos] = (JCOEF) s; - /* Remember its position in case we have to suspend */ - newnz_pos[num_newnz++] = pos; - } - } - } - - if (EOBRUN > 0) { - /* Scan any remaining coefficient positions after the end-of-band - * (the last newly nonzero coefficient, if any). Append a correction - * bit to each already-nonzero coefficient. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - for (; k <= Se; k++) { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } - } - /* Count one block completed in EOB run */ - EOBRUN--; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */ - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; - -undoit: - /* Re-zero any output coefficients that we made newly nonzero */ - while (num_newnz > 0) - (*block)[newnz_pos[--num_newnz]] = 0; - - return FALSE; -} - - -/* - * Module initialization routine for progressive Huffman entropy decoding. - */ - -GLOBAL void -jinit_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int *coef_bit_ptr; - int ci, i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_phuff_decoder; - - /* Mark derived tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - } - - /* Create progression status table */ - cinfo->coef_bits = (int (*)[DCTSIZE2]) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components*DCTSIZE2*SIZEOF(int)); - coef_bit_ptr = & cinfo->coef_bits[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (i = 0; i < DCTSIZE2; i++) - *coef_bit_ptr++ = -1; -} - -#endif /* D_PROGRESSIVE_SUPPORTED */ diff --git a/third_party/jpeg-6/jdpostct.c b/third_party/jpeg-6/jdpostct.c deleted file mode 100644 index f612002..0000000 --- a/third_party/jpeg-6/jdpostct.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * jdpostct.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the decompression postprocessing controller. - * This controller manages the upsampling, color conversion, and color - * quantization/reduction steps; specifically, it controls the buffering - * between upsample/color conversion and color quantization/reduction. - * - * If no color quantization/reduction is required, then this module has no - * work to do, and it just hands off to the upsample/color conversion code. - * An integrated upsample/convert/quantize process would replace this module - * entirely. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_post_controller pub; /* public fields */ - - /* Color quantization source buffer: this holds output data from - * the upsample/color conversion step to be passed to the quantizer. - * For two-pass color quantization, we need a full-image buffer; - * for one-pass operation, a strip buffer is sufficient. - */ - jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ - JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ - JDIMENSION strip_height; /* buffer size in rows */ - /* for two-pass mode only: */ - JDIMENSION starting_row; /* row # of first row in current strip */ - JDIMENSION next_row; /* index of next row to fill/empty in strip */ -} my_post_controller; - -typedef my_post_controller * my_post_ptr; - - -/* Forward declarations */ -METHODDEF void post_process_1pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF void post_process_prepass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -METHODDEF void post_process_2pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF void -start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->quantize_colors) { - /* Single-pass processing with color quantization. */ - post->pub.post_process_data = post_process_1pass; - /* We could be doing buffered-image output before starting a 2-pass - * color quantization; in that case, jinit_d_post_controller did not - * allocate a strip buffer. Use the virtual-array buffer as workspace. - */ - if (post->buffer == NULL) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - (JDIMENSION) 0, post->strip_height, TRUE); - } - } else { - /* For single-pass processing without color quantization, - * I have no work to do; just call the upsampler directly. - */ - post->pub.post_process_data = cinfo->upsample->upsample; - } - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_SAVE_AND_PASS: - /* First pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_prepass; - break; - case JBUF_CRANK_DEST: - /* Second pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_2pass; - break; -#endif /* QUANT_2PASS_SUPPORTED */ - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } - post->starting_row = post->next_row = 0; -} - - -/* - * Process some data in the one-pass (strip buffer) case. - * This is used for color precision reduction as well as one-pass quantization. - */ - -METHODDEF void -post_process_1pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Fill the buffer, but not more than what we can dump out in one go. */ - /* Note we rely on the upsampler to detect bottom of image. */ - max_rows = out_rows_avail - *out_row_ctr; - if (max_rows > post->strip_height) - max_rows = post->strip_height; - num_rows = 0; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &num_rows, max_rows); - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer, output_buf + *out_row_ctr, (int) num_rows); - *out_row_ctr += num_rows; -} - - -#ifdef QUANT_2PASS_SUPPORTED - -/* - * Process some data in the first pass of 2-pass quantization. - */ - -METHODDEF void -post_process_prepass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION old_next_row, num_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, TRUE); - } - - /* Upsample some data (up to a strip height's worth). */ - old_next_row = post->next_row; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &post->next_row, post->strip_height); - - /* Allow quantizer to scan new data. No data is emitted, */ - /* but we advance out_row_ctr so outer loop can tell when we're done. */ - if (post->next_row > old_next_row) { - num_rows = post->next_row - old_next_row; - (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, - (JSAMPARRAY) NULL, (int) num_rows); - *out_row_ctr += num_rows; - } - - /* Advance if we filled the strip. */ - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - - -/* - * Process some data in the second pass of 2-pass quantization. - */ - -METHODDEF void -post_process_2pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, FALSE); - } - - /* Determine number of rows to emit. */ - num_rows = post->strip_height - post->next_row; /* available in strip */ - max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ - if (num_rows > max_rows) - num_rows = max_rows; - /* We have to check bottom of image here, can't depend on upsampler. */ - max_rows = cinfo->output_height - post->starting_row; - if (num_rows > max_rows) - num_rows = max_rows; - - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer + post->next_row, output_buf + *out_row_ctr, - (int) num_rows); - *out_row_ctr += num_rows; - - /* Advance if we filled the strip. */ - post->next_row += num_rows; - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize postprocessing controller. - */ - -GLOBAL void -jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_post_ptr post; - - post = (my_post_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_post_controller)); - cinfo->post = (struct jpeg_d_post_controller *) post; - post->pub.start_pass = start_pass_dpost; - post->whole_image = NULL; /* flag for no virtual arrays */ - post->buffer = NULL; /* flag for no strip buffer */ - - /* Create the quantization buffer, if needed */ - if (cinfo->quantize_colors) { - /* The buffer strip height is max_v_samp_factor, which is typically - * an efficient number of rows for upsampling to return. - * (In the presence of output rescaling, we might want to be smarter?) - */ - post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; - if (need_full_buffer) { - /* Two-pass color quantization: need full-image storage. */ - /* We round up the number of rows to a multiple of the strip height. */ -#ifdef QUANT_2PASS_SUPPORTED - post->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - cinfo->output_width * cinfo->out_color_components, - (JDIMENSION) jround_up((long) cinfo->output_height, - (long) post->strip_height), - post->strip_height); -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - /* One-pass color quantization: just make a strip buffer. */ - post->buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->out_color_components, - post->strip_height); - } - } -} diff --git a/third_party/jpeg-6/jdsample.c b/third_party/jpeg-6/jdsample.c deleted file mode 100644 index 887e34a..0000000 --- a/third_party/jpeg-6/jdsample.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * jdsample.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains upsampling routines. - * - * Upsampling input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. Upsampling will normally produce - * max_v_samp_factor pixel rows from each row group (but this could vary - * if the upsampler is applying a scale factor of its own). - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to upsample a single component */ -typedef JMETHOD(void, upsample1_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Color conversion buffer. When using separate upsampling and color - * conversion steps, this buffer holds one upsampled row group until it - * has been color converted and output. - * Note: we do not allocate any storage for component(s) which are full-size, - * ie do not need rescaling. The corresponding entry of color_buf[] is - * simply set to point to the input data array, thereby avoiding copying. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - /* Per-component upsampling method pointers */ - upsample1_ptr methods[MAX_COMPONENTS]; - - int next_row_out; /* counts rows emitted from color_buf */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ - - /* Height of an input row group for each component. */ - int rowgroup_height[MAX_COMPONENTS]; - - /* These arrays save pixel expansion factors so that int_expand need not - * recompute them each time. They are unused for other upsampling methods. - */ - UINT8 h_expand[MAX_COMPONENTS]; - UINT8 v_expand[MAX_COMPONENTS]; -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF void -start_pass_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the conversion buffer empty */ - upsample->next_row_out = cinfo->max_v_samp_factor; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * In this version we upsample each component independently. - * We upsample one row group into the conversion buffer, then apply - * color conversion a row at a time. - */ - -METHODDEF void -sep_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int ci; - jpeg_component_info * compptr; - JDIMENSION num_rows; - - /* Fill the conversion buffer, if it's empty */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Invoke per-component upsample method. Notice we pass a POINTER - * to color_buf[ci], so that fullsize_upsample can change it. - */ - (*upsample->methods[ci]) (cinfo, compptr, - input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), - upsample->color_buf + ci); - } - upsample->next_row_out = 0; - } - - /* Color-convert and emit rows */ - - /* How many we have in the buffer: */ - num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); - /* Not more than the distance to the end of the image. Need this test - * in case the image height is not a multiple of max_v_samp_factor: - */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - - (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, - (JDIMENSION) upsample->next_row_out, - output_buf + *out_row_ctr, - (int) num_rows); - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - upsample->next_row_out += num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by sep_upsample to upsample pixel values - * of a single component. One row group is processed per call. - */ - - -/* - * For full-size components, we just make color_buf[ci] point at the - * input buffer, and thus avoid copying any data. Note that this is - * safe only because sep_upsample doesn't declare the input row group - * "consumed" until we are done color converting and emitting it. - */ - -METHODDEF void -fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = input_data; -} - - -/* - * This is a no-op version used for "uninteresting" components. - * These components will not be referenced by color conversion. - */ - -METHODDEF void -noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = NULL; /* safety check */ -} - - -/* - * This version handles any integral sampling ratios. - * This is not used for typical JPEG files, so it need not be fast. - * Nor, for that matter, is it particularly accurate: the algorithm is - * simple replication of the input pixel onto the corresponding output - * pixels. The hi-falutin sampling literature refers to this as a - * "box filter". A box filter tends to introduce visible artifacts, - * so if you are actually going to use 3:1 or 4:1 sampling ratios - * you would be well advised to improve this code. - */ - -METHODDEF void -int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - register int h; - JSAMPROW outend; - int h_expand, v_expand; - int inrow, outrow; - - h_expand = upsample->h_expand[compptr->component_index]; - v_expand = upsample->v_expand[compptr->component_index]; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - /* Generate one output row with proper horizontal expansion */ - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - for (h = h_expand; h > 0; h--) { - *outptr++ = invalue; - } - } - /* Generate any additional output rows by duplicating the first one */ - if (v_expand > 1) { - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - v_expand-1, cinfo->output_width); - } - inrow++; - outrow += v_expand; - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. - * It's still a box filter. - */ - -METHODDEF void -h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. - * It's still a box filter. - */ - -METHODDEF void -h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow, outrow; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - 1, cinfo->output_width); - inrow++; - outrow += 2; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. - * - * The upsampling algorithm is linear interpolation between pixel centers, - * also known as a "triangle filter". This is a good compromise between - * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 - * of the way between input pixel centers. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF void -h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register int invalue; - register JDIMENSION colctr; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - /* Special case for first column */ - invalue = GETJSAMPLE(*inptr++); - *outptr++ = (JSAMPLE) invalue; - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ - invalue = GETJSAMPLE(*inptr++) * 3; - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); - } - - /* Special case for last column */ - invalue = GETJSAMPLE(*inptr); - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); - *outptr++ = (JSAMPLE) invalue; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. - * Again a triangle filter; see comments for h2v1 case, above. - * - * It is OK for us to reference the adjacent input rows because we demanded - * context from the main buffer controller (see initialization code). - */ - -METHODDEF void -h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr0, inptr1, outptr; -#if BITS_IN_JSAMPLE == 8 - register int thiscolsum, lastcolsum, nextcolsum; -#else - register JPEG_INT32 thiscolsum, lastcolsum, nextcolsum; -#endif - register JDIMENSION colctr; - int inrow, outrow, v; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - for (v = 0; v < 2; v++) { - /* inptr0 points to nearest input row, inptr1 points to next nearest */ - inptr0 = input_data[inrow]; - if (v == 0) /* next nearest is row above */ - inptr1 = input_data[inrow-1]; - else /* next nearest is row below */ - inptr1 = input_data[inrow+1]; - outptr = output_data[outrow++]; - - /* Special case for first column */ - thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ - /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - } - - /* Special case for last column */ - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); - } - inrow++; - } -} - - -/* - * Module initialization routine for upsampling. - */ - -GLOBAL void -jinit_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - int ci; - jpeg_component_info * compptr; - boolean need_buffer, do_fancy; - int h_in_group, v_in_group, h_out_group, v_out_group; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_upsample; - upsample->pub.upsample = sep_upsample; - upsample->pub.need_context_rows = FALSE; /* until we find out differently */ - - if (cinfo->CCIR601_sampling) /* this isn't supported */ - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, - * so don't ask for it. - */ - do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; - - /* Verify we can handle the sampling factors, select per-component methods, - * and create storage as needed. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Compute size of an "input group" after IDCT scaling. This many samples - * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. - */ - h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - h_out_group = cinfo->max_h_samp_factor; - v_out_group = cinfo->max_v_samp_factor; - upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ - need_buffer = TRUE; - if (! compptr->component_needed) { - /* Don't bother to upsample an uninteresting component. */ - upsample->methods[ci] = noop_upsample; - need_buffer = FALSE; - } else if (h_in_group == h_out_group && v_in_group == v_out_group) { - /* Fullsize components can be processed without any work. */ - upsample->methods[ci] = fullsize_upsample; - need_buffer = FALSE; - } else if (h_in_group * 2 == h_out_group && - v_in_group == v_out_group) { - /* Special cases for 2h1v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) - upsample->methods[ci] = h2v1_fancy_upsample; - else - upsample->methods[ci] = h2v1_upsample; - } else if (h_in_group * 2 == h_out_group && - v_in_group * 2 == v_out_group) { - /* Special cases for 2h2v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) { - upsample->methods[ci] = h2v2_fancy_upsample; - upsample->pub.need_context_rows = TRUE; - } else - upsample->methods[ci] = h2v2_upsample; - } else if ((h_out_group % h_in_group) == 0 && - (v_out_group % v_in_group) == 0) { - /* Generic integral-factors upsampling method */ - upsample->methods[ci] = int_upsample; - upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); - upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - if (need_buffer) { - upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) jround_up((long) cinfo->output_width, - (long) cinfo->max_h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/third_party/jpeg-6/jdtrans.c b/third_party/jpeg-6/jdtrans.c deleted file mode 100644 index 5c14adc..0000000 --- a/third_party/jpeg-6/jdtrans.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * jdtrans.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding decompression, - * that is, reading raw DCT coefficient arrays from an input JPEG file. - * The routines in jdapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL void transdecode_master_selection JPP((j_decompress_ptr cinfo)); - - -/* - * Read the coefficient arrays from a JPEG file. - * jpeg_read_header must be completed before calling this. - * - * The entire image is read into a set of virtual coefficient-block arrays, - * one per component. The return value is a pointer to the array of - * virtual-array descriptors. These can be manipulated directly via the - * JPEG memory manager, or handed off to jpeg_write_coefficients(). - * To release the memory occupied by the virtual arrays, call - * jpeg_finish_decompress() when done with the data. - * - * Returns NULL if suspended. This case need be checked only if - * a suspending data source is used. - */ - -GLOBAL jvirt_barray_ptr * -jpeg_read_coefficients (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } else if (cinfo->global_state != DSTATE_RDCOEFS) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Absorb whole file into the coef buffer */ - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return NULL; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - /* Set state so that jpeg_finish_decompress does the right thing */ - cinfo->global_state = DSTATE_STOPPING; - return cinfo->coef->coef_arrays; -} - - -/* - * Master selection of decompression modules for transcoding. - * This substitutes for jdmaster.c's initialization of the full decompressor. - */ - -LOCAL void -transdecode_master_selection (j_decompress_ptr cinfo) -{ - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); - } - - /* Always get a full-image coefficient buffer. */ - jinit_d_coef_controller(cinfo, TRUE); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - - /* Initialize progress monitoring. */ - if (cinfo->progress != NULL) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else if (cinfo->inputctl->has_multiple_scans) { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } else { - nscans = 1; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = 1; - } -} diff --git a/third_party/jpeg-6/jerror.c b/third_party/jpeg-6/jerror.c deleted file mode 100644 index fc9e192..0000000 --- a/third_party/jpeg-6/jerror.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * jerror.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains simple error-reporting and trace-message routines. - * These are suitable for Unix-like systems and others where writing to - * stderr is the right thing to do. Many applications will want to replace - * some or all of these routines. - * - * These routines are used by both the compression and decompression code. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jversion.h" -#include "jerror.h" - -#include "../../source/engine/renderer/tr_local.h" - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif - - -/* - * Create the message string table. - * We do this from the master message list in jerror.h by re-reading - * jerror.h with a suitable definition for macro JMESSAGE. - * The message table is made an external symbol just in case any applications - * want to refer to it directly. - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_message_table jMsgTable -#endif - -#define JMESSAGE(code,string) string , - -const char * const jpeg_std_message_table[] = { -#include "jerror.h" - NULL -}; - - -/* - * Error exit handler: must not return to caller. - * - * Applications may override this if they want to get control back after - * an error. Typically one would longjmp somewhere instead of exiting. - * The setjmp buffer can be made a private field within an expanded error - * handler object. Note that the info needed to generate an error message - * is stored in the error object, so you can generate the message now or - * later, at your convenience. - * You should make sure that the JPEG object is cleaned up (with jpeg_abort - * or jpeg_destroy) at some point. - */ - -METHODDEF void -error_exit (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - - /* Let the memory manager delete any temp files before we die */ - jpeg_destroy(cinfo); - - ri.Error( ERR_FATAL, "%s\n", buffer ); -} - - -/* - * Actual output of an error or trace message. - * Applications may override this method to send JPEG messages somewhere - * other than stderr. - */ - -METHODDEF void -output_message (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - - /* Send it to stderr, adding a newline */ - ri.Printf(PRINT_ALL, "%s\n", buffer); -} - - -/* - * Decide whether to emit a trace or warning message. - * msg_level is one of: - * -1: recoverable corrupt-data warning, may want to abort. - * 0: important advisory messages (always display to user). - * 1: first level of tracing detail. - * 2,3,...: successively more detailed tracing messages. - * An application might override this method if it wanted to abort on warnings - * or change the policy about which messages to display. - */ - -METHODDEF void -emit_message (j_common_ptr cinfo, int msg_level) -{ - struct jpeg_error_mgr * err = cinfo->err; - - if (msg_level < 0) { - /* It's a warning message. Since corrupt files may generate many warnings, - * the policy implemented here is to show only the first warning, - * unless trace_level >= 3. - */ - if (err->num_warnings == 0 || err->trace_level >= 3) - (*err->output_message) (cinfo); - /* Always count warnings in num_warnings. */ - err->num_warnings++; - } else { - /* It's a trace message. Show it if trace_level >= msg_level. */ - if (err->trace_level >= msg_level) - (*err->output_message) (cinfo); - } -} - - -/* - * Format a message string for the most recent JPEG error or message. - * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX - * characters. Note that no '\n' character is added to the string. - * Few applications should need to override this method. - */ - -METHODDEF void -format_message (j_common_ptr cinfo, char * buffer) -{ - struct jpeg_error_mgr * err = cinfo->err; - int msg_code = err->msg_code; - const char * msgtext = NULL; - const char * msgptr; - char ch; - boolean isstring; - - /* Look up message string in proper table */ - if (msg_code > 0 && msg_code <= err->last_jpeg_message) { - msgtext = err->jpeg_message_table[msg_code]; - } else if (err->addon_message_table != NULL && - msg_code >= err->first_addon_message && - msg_code <= err->last_addon_message) { - msgtext = err->addon_message_table[msg_code - err->first_addon_message]; - } - - /* Defend against bogus message number */ - if (msgtext == NULL) { - err->msg_parm.i[0] = msg_code; - msgtext = err->jpeg_message_table[0]; - } - - /* Check for string parameter, as indicated by %s in the message text */ - isstring = FALSE; - msgptr = msgtext; - while ((ch = *msgptr++) != '\0') { - if (ch == '%') { - if (*msgptr == 's') isstring = TRUE; - break; - } - } - - /* Format the message into the passed buffer */ - if (isstring) - sprintf(buffer, msgtext, err->msg_parm.s); - else - sprintf(buffer, msgtext, - err->msg_parm.i[0], err->msg_parm.i[1], - err->msg_parm.i[2], err->msg_parm.i[3], - err->msg_parm.i[4], err->msg_parm.i[5], - err->msg_parm.i[6], err->msg_parm.i[7]); -} - - -/* - * Reset error state variables at start of a new image. - * This is called during compression startup to reset trace/error - * processing to default state, without losing any application-specific - * method pointers. An application might possibly want to override - * this method if it has additional error processing state. - */ - -METHODDEF void -reset_error_mgr (j_common_ptr cinfo) -{ - cinfo->err->num_warnings = 0; - /* trace_level is not reset since it is an application-supplied parameter */ - cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ -} - - -/* - * Fill in the standard error-handling methods in a jpeg_error_mgr object. - * Typical call is: - * struct jpeg_compress_struct cinfo; - * struct jpeg_error_mgr err; - * - * cinfo.err = jpeg_std_error(&err); - * after which the application may override some of the methods. - */ - -GLOBAL struct jpeg_error_mgr * -jpeg_std_error (struct jpeg_error_mgr * err) -{ - err->error_exit = error_exit; - err->emit_message = emit_message; - err->output_message = output_message; - err->format_message = format_message; - err->reset_error_mgr = reset_error_mgr; - - err->trace_level = 0; /* default = no tracing */ - err->num_warnings = 0; /* no warnings emitted yet */ - err->msg_code = 0; /* may be useful as a flag for "no error" */ - - /* Initialize message table pointers */ - err->jpeg_message_table = jpeg_std_message_table; - err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; - - err->addon_message_table = NULL; - err->first_addon_message = 0; /* for safety */ - err->last_addon_message = 0; - - return err; -} diff --git a/third_party/jpeg-6/jerror.h b/third_party/jpeg-6/jerror.h deleted file mode 100644 index bf60e7e..0000000 --- a/third_party/jpeg-6/jerror.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - * jerror.h - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the JPEG library. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - * A set of error-reporting macros are defined too. Some applications using - * the JPEG library may wish to include this file to get the error codes - * and/or the macros. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef JERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* JERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ - -/* For maintenance convenience, list is alphabetical by message code name */ -JMESSAGE(JERR_ARITH_NOTIMPL, - "Sorry, there are legal restrictions on arithmetic coding") -JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") -JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") -JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") -JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") -JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") -JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") -JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") -JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") -JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") -JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") -JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") -JMESSAGE(JERR_BAD_PROGRESSION, - "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") -JMESSAGE(JERR_BAD_PROG_SCRIPT, - "Invalid progressive parameters at scan script entry %d") -JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") -JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") -JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") -JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") -JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") -JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") -JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") -JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") -JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") -JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") -JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") -JMESSAGE(JERR_DHT_COUNTS, "Bogus DHT counts") -JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") -JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") -JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") -JMESSAGE(JERR_EMS_READ, "Read from EMS failed") -JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") -JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") -JMESSAGE(JERR_FILE_READ, "Input file read error") -JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") -JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") -JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") -JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") -JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") -JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") -JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") -JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, - "Cannot transcode due to multiple use of quantization table %d") -JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") -JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") -JMESSAGE(JERR_NOTIMPL, "Not implemented yet") -JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") -JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") -JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") -JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") -JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") -JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") -JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") -JMESSAGE(JERR_QUANT_COMPONENTS, - "Cannot quantize more than %d color components") -JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") -JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") -JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") -JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") -JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") -JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") -JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") -JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") -JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") -JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") -JMESSAGE(JERR_TFILE_WRITE, - "Write failed on temporary file --- out of disk space?") -JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") -JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") -JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") -JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") -JMESSAGE(JERR_XMS_READ, "Read from XMS failed") -JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") -JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) -JMESSAGE(JMSG_VERSION, JVERSION) -JMESSAGE(JTRC_16BIT_TABLES, - "Caution: quantization tables are too coarse for baseline JPEG") -JMESSAGE(JTRC_ADOBE, - "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") -JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") -JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") -JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") -JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") -JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") -JMESSAGE(JTRC_DRI, "Define Restart Interval %u") -JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") -JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") -JMESSAGE(JTRC_EOI, "End Of Image") -JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") -JMESSAGE(JTRC_JFIF, "JFIF APP0 marker, density %dx%d %d") -JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, - "Warning: thumbnail image size does not match data length %u") -JMESSAGE(JTRC_JFIF_MINOR, "Unknown JFIF minor revision number %d.%02d") -JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") -JMESSAGE(JTRC_MISC_MARKER, "Skipping marker 0x%02x, length %u") -JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") -JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") -JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") -JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") -JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") -JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") -JMESSAGE(JTRC_RST, "RST%d") -JMESSAGE(JTRC_SMOOTH_NOTIMPL, - "Smoothing not supported with nonstandard sampling ratios") -JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") -JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") -JMESSAGE(JTRC_SOI, "Start of Image") -JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") -JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") -JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") -JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") -JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") -JMESSAGE(JTRC_UNKNOWN_IDS, - "Unrecognized component IDs %d %d %d, assuming YCbCr") -JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") -JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") -JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") -JMESSAGE(JWRN_BOGUS_PROGRESSION, - "Inconsistent progression sequence for component %d coefficient %d") -JMESSAGE(JWRN_EXTRANEOUS_DATA, - "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") -JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") -JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") -JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") -JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") -JMESSAGE(JWRN_MUST_RESYNC, - "Corrupt JPEG data: found marker 0x%02x instead of RST%d") -JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") -JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTMSGCODE -} J_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE - - -#ifndef JERROR_H -#define JERROR_H - -/* Macros to simplify using the error and trace message stuff */ -/* The first parameter is either type of cinfo pointer */ - -/* Fatal errors (print message and exit) */ -#define ERREXIT(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT3(cinfo,code,p1,p2,p3) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (cinfo)->err->msg_parm.i[3] = (p4), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXITS(cinfo,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) - -#define MAKESTMT(stuff) do { stuff } while (0) - -/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ -#define WARNMS(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) - -/* Informational/debugging messages */ -#define TRACEMS(cinfo,lvl,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS1(cinfo,lvl,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS2(cinfo,lvl,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMSS(cinfo,lvl,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) - -#endif /* JERROR_H */ diff --git a/third_party/jpeg-6/jfdctflt.c b/third_party/jpeg-6/jfdctflt.c deleted file mode 100644 index 21371eb..0000000 --- a/third_party/jpeg-6/jfdctflt.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * jfdctflt.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * forward DCT (Discrete Cosine Transform). - * - * This implementation should be more accurate than either of the integer - * DCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL void -jpeg_fdct_float (FAST_FLOAT * data) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; - FAST_FLOAT *dataptr; - int ctr; - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/third_party/jpeg-6/jfdctfst.c b/third_party/jpeg-6/jfdctfst.c deleted file mode 100644 index a52d7b7..0000000 --- a/third_party/jpeg-6/jfdctfst.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * jfdctfst.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jfdctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * Again to save a few shifts, the intermediate results between pass 1 and - * pass 2 are not upscaled, but are represented only to integral precision. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#define CONST_BITS 8 - - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ -#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ -#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ -#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ -#else -#define FIX_0_382683433 FIX(0.382683433) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_707106781 FIX(0.707106781) -#define FIX_1_306562965 FIX(1.306562965) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL void -jpeg_fdct_ifast (DCTELEM * data) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z1, z2, z3, z4, z5, z11, z13; - DCTELEM *dataptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/third_party/jpeg-6/jfdctint.c b/third_party/jpeg-6/jfdctint.c deleted file mode 100644 index 7df0433..0000000 --- a/third_party/jpeg-6/jfdctint.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * jfdctint.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D DCT step produces outputs which are a factor of sqrt(N) - * larger than the true DCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D DCT, - * because the y0 and y4 outputs need not be divided by sqrt(N). - * In the IJG code, this factor of 8 is removed by the quantization step - * (in jcdctmgr.c), NOT in this module. - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (For 12-bit sample data, the intermediate - * array is INT32 anyway.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL void -jpeg_fdct_islow (DCTELEM * data) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3, z4, z5; - DCTELEM *dataptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS-PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS); - dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS+PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/third_party/jpeg-6/jidctflt.c b/third_party/jpeg-6/jidctflt.c deleted file mode 100644 index 7f908de..0000000 --- a/third_party/jpeg-6/jidctflt.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * jidctflt.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * This implementation should be more accurate than either of the integer - * IDCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a float result. - */ - -#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL void -jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z5, z10, z11, z12, z13; - JCOEFPTR inptr; - FLOAT_MULT_TYPE * quantptr; - FAST_FLOAT * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | - inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero */ - FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = tmp0 + tmp7; - wsptr[DCTSIZE*7] = tmp0 - tmp7; - wsptr[DCTSIZE*1] = tmp1 + tmp6; - wsptr[DCTSIZE*6] = tmp1 - tmp6; - wsptr[DCTSIZE*2] = tmp2 + tmp5; - wsptr[DCTSIZE*5] = tmp2 - tmp5; - wsptr[DCTSIZE*4] = tmp3 + tmp4; - wsptr[DCTSIZE*3] = tmp3 - tmp4; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * And testing floats for zero is relatively expensive, so we don't bother. - */ - - /* Even part */ - - tmp10 = wsptr[0] + wsptr[4]; - tmp11 = wsptr[0] - wsptr[4]; - - tmp13 = wsptr[2] + wsptr[6]; - tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = wsptr[5] + wsptr[3]; - z10 = wsptr[5] - wsptr[3]; - z11 = wsptr[1] + wsptr[7]; - z12 = wsptr[1] - wsptr[7]; - - tmp7 = z11 + z13; - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[(int) DESCALE((JPEG_INT32) (tmp0 + tmp7), 3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE((JPEG_INT32) (tmp0 - tmp7), 3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE((JPEG_INT32) (tmp1 + tmp6), 3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE((JPEG_INT32) (tmp1 - tmp6), 3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE((JPEG_INT32) (tmp2 + tmp5), 3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE((JPEG_INT32) (tmp2 - tmp5), 3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE((JPEG_INT32) (tmp3 + tmp4), 3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE((JPEG_INT32) (tmp3 - tmp4), 3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/third_party/jpeg-6/jidctfst.c b/third_party/jpeg-6/jidctfst.c deleted file mode 100644 index 5736817..0000000 --- a/third_party/jpeg-6/jidctfst.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * jidctfst.c - * - * Copyright (C) 1994-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jidctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * The dequantized coefficients are not integers because the AA&N scaling - * factors have been incorporated. We represent them scaled up by PASS1_BITS, - * so that the first and second IDCT rounds have the same input scaling. - * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to - * avoid a descaling shift; this compromises accuracy rather drastically - * for small quantization table entries, but it saves a lot of shifts. - * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, - * so we use a much larger scaling factor to preserve accuracy. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 8 -#define PASS1_BITS 2 -#else -#define CONST_BITS 8 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ -#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ -#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ -#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ -#else -#define FIX_1_082392200 FIX(1.082392200) -#define FIX_1_414213562 FIX(1.414213562) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_613125930 FIX(2.613125930) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 - * multiplication will do. For 12-bit data, the multiplier table is - * declared INT32, so a 32-bit multiply will be used. - */ - -#if BITS_IN_JSAMPLE == 8 -#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) -#else -#define DEQUANTIZE(coef,quantval) \ - DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) -#endif - - -/* Like DESCALE, but applies to a DCTELEM and produces an int. - * We assume that int right shift is unsigned if INT32 right shift is. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS DCTELEM ishift_temp; -#if BITS_IN_JSAMPLE == 8 -#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ -#else -#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ -#endif -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -#ifdef USE_ACCURATE_ROUNDING -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) -#else -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) -#endif - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL void -jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z5, z10, z11, z12, z13; - JCOEFPTR inptr; - IFAST_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS /* for DESCALE */ - ISHIFT_TEMPS /* for IDESCALE */ - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | - inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero */ - int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); - wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); - wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); - wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); - wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); - wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); - wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); - wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[4] | wsptr[5] | wsptr[6] | - wsptr[7]) == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); - tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); - - tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); - tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) - - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; - z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; - z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; - z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/third_party/jpeg-6/jidctint.c b/third_party/jpeg-6/jidctint.c deleted file mode 100644 index f25b08d..0000000 --- a/third_party/jpeg-6/jidctint.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * jidctint.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) - * larger than the true IDCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D IDCT, - * because the y0 and y4 inputs need not be divided by sqrt(N). - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (To scale up 12-bit sample data further, an - * intermediate INT32 array would be needed.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL void -jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3, z4, z5; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | - inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*7] = (int) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*6] = (int) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*5] = (int) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*4] = (int) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[4] | wsptr[5] | wsptr[6] | - wsptr[7]) == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - tmp0 = ((INT32) wsptr[0] + (INT32) wsptr[4]) << CONST_BITS; - tmp1 = ((INT32) wsptr[0] - (INT32) wsptr[4]) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (INT32) wsptr[7]; - tmp1 = (INT32) wsptr[5]; - tmp2 = (INT32) wsptr[3]; - tmp3 = (INT32) wsptr[1]; - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/third_party/jpeg-6/jidctred.c b/third_party/jpeg-6/jidctred.c deleted file mode 100644 index 019c339..0000000 --- a/third_party/jpeg-6/jidctred.c +++ /dev/null @@ -1,397 +0,0 @@ -/* - * jidctred.c - * - * Copyright (C) 1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains inverse-DCT routines that produce reduced-size output: - * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block. - * - * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M) - * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step - * with an 8-to-4 step that produces the four averages of two adjacent outputs - * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output). - * These steps were derived by computing the corresponding values at the end - * of the normal LL&M code, then simplifying as much as possible. - * - * 1x1 is trivial: just take the DC coefficient divided by 8. - * - * See jidctint.c for additional comments. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef IDCT_SCALING_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling is the same as in jidctint.c. */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_211164243 ((INT32) 1730) /* FIX(0.211164243) */ -#define FIX_0_509795579 ((INT32) 4176) /* FIX(0.509795579) */ -#define FIX_0_601344887 ((INT32) 4926) /* FIX(0.601344887) */ -#define FIX_0_720959822 ((INT32) 5906) /* FIX(0.720959822) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_850430095 ((INT32) 6967) /* FIX(0.850430095) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_061594337 ((INT32) 8697) /* FIX(1.061594337) */ -#define FIX_1_272758580 ((INT32) 10426) /* FIX(1.272758580) */ -#define FIX_1_451774981 ((INT32) 11893) /* FIX(1.451774981) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_2_172734803 ((INT32) 17799) /* FIX(2.172734803) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_624509785 ((INT32) 29692) /* FIX(3.624509785) */ -#else -#define FIX_0_211164243 FIX(0.211164243) -#define FIX_0_509795579 FIX(0.509795579) -#define FIX_0_601344887 FIX(0.601344887) -#define FIX_0_720959822 FIX(0.720959822) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_850430095 FIX(0.850430095) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_061594337 FIX(1.061594337) -#define FIX_1_272758580 FIX(1.272758580) -#define FIX_1_451774981 FIX(1.451774981) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_172734803 FIX(2.172734803) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_624509785 FIX(3.624509785) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 4x4 output block. - */ - -GLOBAL void -jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process column 4, because second pass won't use it */ - if (ctr == DCTSIZE-4) - continue; - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero; we need not examine term 4 for 4x4 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= (CONST_BITS+1); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1); - } - - /* Pass 2: process 4 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[5] | wsptr[6] | - wsptr[7]) == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1); - - tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065) - + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = (INT32) wsptr[7]; - z2 = (INT32) wsptr[5]; - z3 = (INT32) wsptr[3]; - z4 = (INT32) wsptr[1]; - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 2x2 output block. - */ - -GLOBAL void -jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp10, z1; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process columns 2,4,6 */ - if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6) - continue; - if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*3] | - inptr[DCTSIZE*5] | inptr[DCTSIZE*7]) == 0) { - /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - - continue; - } - - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp10 = z1 << (CONST_BITS+2); - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2); - } - - /* Pass 2: process 2 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 2; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if ((wsptr[1] | wsptr[3] | wsptr[5] | wsptr[7]) == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2); - - /* Odd part */ - - tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */ - + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */ - + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */ - + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 1x1 output block. - */ - -GLOBAL void -jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - int dcval; - ISLOW_MULT_TYPE * quantptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* We hardly need an inverse DCT routine for this: just take the - * average pixel value, which is one-eighth of the DC coefficient. - */ - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - dcval = DEQUANTIZE(coef_block[0], quantptr[0]); - dcval = (int) DESCALE((INT32) dcval, 3); - - output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; -} - -#endif /* IDCT_SCALING_SUPPORTED */ diff --git a/third_party/jpeg-6/jinclude.h b/third_party/jpeg-6/jinclude.h deleted file mode 100644 index eadcd19..0000000 --- a/third_party/jpeg-6/jinclude.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * jinclude.h - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file exists to provide a single place to fix any problems with - * including the wrong system include files. (Common problems are taken - * care of by the standard jconfig symbols, but on really weird systems - * you may have to edit this file.) - * - * NOTE: this file is NOT intended to be included by applications using the - * JPEG library. Most applications need only include jpeglib.h. - */ - - -#ifdef _WIN32 - -#pragma warning(disable : 4018) // signed/unsigned mismatch -#pragma warning(disable : 4032) -#pragma warning(disable : 4051) -#pragma warning(disable : 4057) // slightly different base types -#pragma warning(disable : 4100) // unreferenced formal parameter -#pragma warning(disable : 4115) -#pragma warning(disable : 4125) // decimal digit terminates octal escape sequence -#pragma warning(disable : 4127) // conditional expression is constant -#pragma warning(disable : 4136) -#pragma warning(disable : 4152) // nonstandard extension, function/data pointer conversion in expression -#pragma warning(disable : 4201) -#pragma warning(disable : 4214) -#pragma warning(disable : 4244) -#pragma warning(disable : 4305) // truncation from const double to float -#pragma warning(disable : 4310) // cast truncates constant value -#pragma warning(disable: 4505) // unreferenced local function has been removed -#pragma warning(disable : 4514) -#pragma warning(disable : 4702) // unreachable code -#pragma warning(disable : 4711) // selected for automatic inline expansion -#pragma warning(disable : 4220) // varargs matches remaining parameters -#pragma warning(disable : 4761) // integral size mismatch -#endif - -/* Include auto-config file to find out which system include files we need. */ - -#include "../jpeg-6/jconfig.h" /* auto configuration options */ -#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ - -/* - * We need the NULL macro and size_t typedef. - * On an ANSI-conforming system it is sufficient to include . - * Otherwise, we get them from or ; we may have to - * pull in as well. - * Note that the core JPEG library does not require ; - * only the default error handler and data source/destination modules do. - * But we must pull it in because of the references to FILE in jpeglib.h. - * You can remove those references if you want to compile without . - */ - -#ifdef HAVE_STDDEF_H -#include -#endif - -#ifdef HAVE_STDLIB_H -#include -#endif - -#ifdef NEED_SYS_TYPES_H -#include -#endif - -#include - -/* - * We need memory copying and zeroing functions, plus strncpy(). - * ANSI and System V implementations declare these in . - * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). - * Some systems may declare memset and memcpy in . - * - * NOTE: we assume the size parameters to these functions are of type size_t. - * Change the casts in these macros if not! - */ - -#ifdef NEED_BSD_STRINGS - -#include -#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) -#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) - -#else /* not BSD, assume ANSI/SysV string lib */ - -#include -#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) -#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) - -#endif - -/* - * In ANSI C, and indeed any rational implementation, size_t is also the - * type returned by sizeof(). However, it seems there are some irrational - * implementations out there, in which sizeof() returns an int even though - * size_t is defined as long or unsigned long. To ensure consistent results - * we always use this SIZEOF() macro in place of using sizeof() directly. - */ - -#define SIZEOF(object) ((size_t) sizeof(object)) - -/* - * The modules that use fread() and fwrite() always invoke them through - * these macros. On some systems you may need to twiddle the argument casts. - * CAUTION: argument order is different from underlying functions! - */ - -#define JFREAD(file,buf,sizeofbuf) \ - ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) -#define JFWRITE(file,buf,sizeofbuf) \ - ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/third_party/jpeg-6/jload.c b/third_party/jpeg-6/jload.c deleted file mode 100644 index dc82555..0000000 --- a/third_party/jpeg-6/jload.c +++ /dev/null @@ -1,145 +0,0 @@ - -#include "../game/q_shared.h" -#include "../qcommon/qcommon.h" - -/* - * Include file for users of JPEG library. - * You will need to have included system headers that define at least - * the typedefs FILE and size_t before you can include jpeglib.h. - * (stdio.h is sufficient on ANSI-conforming systems.) - * You may also wish to include "jerror.h". - */ - -#include "jpeglib.h" - - -int LoadJPG( const char *filename, unsigned char **pic, int *width, int *height ) { - /* This struct contains the JPEG decompression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - */ - struct jpeg_decompress_struct cinfo; - /* We use our private extension JPEG error handler. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct jpeg_error_mgr jerr; - /* More stuff */ - fileHandle_t infile; /* source file */ - JSAMPARRAY buffer; /* Output row buffer */ - int row_stride; /* physical row width in output buffer */ - unsigned char *out; - - /* In this example we want to open the input file before doing anything else, - * so that the setjmp() error recovery below can assume the file is open. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to read binary files. - */ - - FS_FOpenFileRead( filename, &infile, qfalse ); - if (infile == 0) { - return 0; - } - - /* Step 1: allocate and initialize JPEG decompression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - - /* Now we can initialize the JPEG decompression object. */ - jpeg_create_decompress(&cinfo); - - /* Step 2: specify data source (eg, a file) */ - - jpeg_stdio_src(&cinfo, infile); - - /* Step 3: read file parameters with jpeg_read_header() */ - - (void) jpeg_read_header(&cinfo, TRUE); - /* We can ignore the return value from jpeg_read_header since - * (a) suspension is not possible with the stdio data source, and - * (b) we passed TRUE to reject a tables-only JPEG file as an error. - * See libjpeg.doc for more info. - */ - - /* Step 4: set parameters for decompression */ - - /* In this example, we don't need to change any of the defaults set by - * jpeg_read_header(), so we do nothing here. - */ - - /* Step 5: Start decompressor */ - - (void) jpeg_start_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* We may need to do some setup of our own at this point before reading - * the data. After jpeg_start_decompress() we have the correct scaled - * output image dimensions available, as well as the output colormap - * if we asked for color quantization. - * In this example, we need to make an output work buffer of the right size. - */ - /* JSAMPLEs per row in output buffer */ - row_stride = cinfo.output_width * cinfo.output_components; - - out = Z_Malloc(cinfo.output_width*cinfo.output_height*cinfo.output_components); - - *pic = out; - *width = cinfo.output_width; - *height = cinfo.output_height; - - /* Step 6: while (scan lines remain to be read) */ - /* jpeg_read_scanlines(...); */ - - /* Here we use the library's state variable cinfo.output_scanline as the - * loop counter, so that we don't have to keep track ourselves. - */ - while (cinfo.output_scanline < cinfo.output_height) { - /* jpeg_read_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could ask for - * more than one scanline at a time if that's more convenient. - */ - buffer = (JSAMPARRAY)out+(row_stride*cinfo.output_scanline); - (void) jpeg_read_scanlines(&cinfo, buffer, 1); - } - - /* Step 7: Finish decompression */ - - (void) jpeg_finish_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* Step 8: Release JPEG decompression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_decompress(&cinfo); - - /* After finish_decompress, we can close the input file. - * Here we postpone it until after no more JPEG errors are possible, - * so as to simplify the setjmp error logic above. (Actually, I don't - * think that jpeg_destroy can do an error exit, but why assume anything...) - */ - FS_FCloseFile(infile); - - /* At this point you may want to check to see whether any corrupt-data - * warnings occurred (test whether jerr.pub.num_warnings is nonzero). - */ - - /* And we're done! */ - return 1; -} - diff --git a/third_party/jpeg-6/jmemansi.c b/third_party/jpeg-6/jmemansi.c deleted file mode 100644 index 70010f9..0000000 --- a/third_party/jpeg-6/jmemansi.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * jmemansi.c - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a simple generic implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that you have the ANSI-standard library routine tmpfile(). - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL void * -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL void FAR * -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL long -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF void -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF void -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF void -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); - /* Since this implementation uses tmpfile() to create the file, - * no explicit file deletion is needed. - */ -} - - -/* - * Initial opening of a backing-store object. - * - * This version uses tmpfile(), which constructs a suitable file name - * behind the scenes. We don't have to use info->temp_name[] at all; - * indeed, we can't even find out the actual name of the temp file. - */ - -GLOBAL void -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - if ((info->temp_file = tmpfile()) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL long -jpeg_mem_init (j_common_ptr cinfo) -{ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL void -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/third_party/jpeg-6/jmemdos.c b/third_party/jpeg-6/jmemdos.c deleted file mode 100644 index 4db8ec5..0000000 --- a/third_party/jpeg-6/jmemdos.c +++ /dev/null @@ -1,634 +0,0 @@ -/* - * jmemdos.c - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides an MS-DOS-compatible implementation of the system- - * dependent portion of the JPEG memory manager. Temporary data can be - * stored in extended or expanded memory as well as in regular DOS files. - * - * If you use this file, you must be sure that NEED_FAR_POINTERS is defined - * if you compile in a small-data memory model; it should NOT be defined if - * you use a large-data memory model. This file is not recommended if you - * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. - * Also, this code will NOT work if struct fields are aligned on greater than - * 2-byte boundaries. - * - * Based on code contributed by Ge' Weijers. - */ - -/* - * If you have both extended and expanded memory, you may want to change the - * order in which they are tried in jopen_backing_store. On a 286 machine - * expanded memory is usually faster, since extended memory access involves - * an expensive protected-mode-and-back switch. On 386 and better, extended - * memory is usually faster. As distributed, the code tries extended memory - * first (what? not everyone has a 386? :-). - * - * You can disable use of extended/expanded memory entirely by altering these - * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). - */ - -#ifndef XMS_SUPPORTED -#define XMS_SUPPORTED 1 -#endif -#ifndef EMS_SUPPORTED -#define EMS_SUPPORTED 1 -#endif - - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare these */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -extern char * getenv JPP((const char * name)); -#endif - -#ifdef NEED_FAR_POINTERS - -#ifdef __TURBOC__ -/* These definitions work for Borland C (Turbo C) */ -#include /* need farmalloc(), farfree() */ -#define far_malloc(x) farmalloc(x) -#define far_free(x) farfree(x) -#else -/* These definitions work for Microsoft C and compatible compilers */ -#include /* need _fmalloc(), _ffree() */ -#define far_malloc(x) _fmalloc(x) -#define far_free(x) _ffree(x) -#endif - -#else /* not NEED_FAR_POINTERS */ - -#define far_malloc(x) malloc(x) -#define far_free(x) free(x) - -#endif /* NEED_FAR_POINTERS */ - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#else -#define READ_BINARY "rb" -#endif - -#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ - MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ -#endif - - -/* - * Declarations for assembly-language support routines (see jmemdosa.asm). - * - * The functions are declared "far" as are all pointer arguments; - * this ensures the assembly source code will work regardless of the - * compiler memory model. We assume "short" is 16 bits, "long" is 32. - */ - -typedef void far * XMSDRIVER; /* actually a pointer to code */ -typedef struct { /* registers for calling XMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } XMScontext; -typedef struct { /* registers for calling EMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } EMScontext; - -EXTERN short far jdos_open JPP((short far * handle, char far * filename)); -EXTERN short far jdos_close JPP((short handle)); -EXTERN short far jdos_seek JPP((short handle, long offset)); -EXTERN short far jdos_read JPP((short handle, void far * buffer, - unsigned short count)); -EXTERN short far jdos_write JPP((short handle, void far * buffer, - unsigned short count)); -EXTERN void far jxms_getdriver JPP((XMSDRIVER far *)); -EXTERN void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); -EXTERN short far jems_available JPP((void)); -EXTERN void far jems_calldriver JPP((EMScontext far *)); - - -/* - * Selection of a file name for a temporary file. - * This is highly system-dependent, and you may want to customize it. - */ - -static int next_file_num; /* to distinguish among several temp files */ - -LOCAL void -select_file_name (char * fname) -{ - const char * env; - char * ptr; - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - /* Get temp directory name from environment TMP or TEMP variable; - * if none, use "." - */ - if ((env = (const char *) getenv("TMP")) == NULL) - if ((env = (const char *) getenv("TEMP")) == NULL) - env = "."; - if (*env == '\0') /* null string means "." */ - env = "."; - ptr = fname; /* copy name to fname */ - while (*env != '\0') - *ptr++ = *env++; - if (ptr[-1] != '\\' && ptr[-1] != '/') - *ptr++ = '\\'; /* append backslash if not in env variable */ - /* Append a suitable file name */ - next_file_num++; /* advance counter */ - sprintf(ptr, "JPG%03d.TMP", next_file_num); - /* Probe to see if file name is already in use */ - if ((tfile = fopen(fname, READ_BINARY)) == NULL) - break; - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - - -/* - * Near-memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL void * -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are allocated in far memory, if possible - */ - -GLOBAL void FAR * -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) far_malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - far_free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ -#endif - -GLOBAL long -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - -/* - * For MS-DOS we support three types of backing storage: - * 1. Conventional DOS files. We access these by direct DOS calls rather - * than via the stdio package. This provides a bit better performance, - * but the real reason is that the buffers to be read or written are FAR. - * The stdio library for small-data memory models can't cope with that. - * 2. Extended memory, accessed per the XMS V2.0 specification. - * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. - * You'll need copies of those specs to make sense of the related code. - * The specs are available by Internet FTP from the SIMTEL archives - * (oak.oakland.edu and its various mirror sites). See files - * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. - */ - - -/* - * Access methods for a DOS file. - */ - - -METHODDEF void -read_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_read(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF void -write_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_write(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF void -close_file_store (j_common_ptr cinfo, backing_store_ptr info) -{ - jdos_close(info->handle.file_handle); /* close the file */ - remove(info->temp_name); /* delete the file */ -/* If your system doesn't have remove(), try unlink() instead. - * remove() is the ANSI-standard name for this function, but - * unlink() was more common in pre-ANSI systems. - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -LOCAL boolean -open_file_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - short handle; - - select_file_name(info->temp_name); - if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { - /* might as well exit since jpeg_open_backing_store will fail anyway */ - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - return FALSE; - } - info->handle.file_handle = handle; - info->read_backing_store = read_file_store; - info->write_backing_store = write_file_store; - info->close_backing_store = close_file_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); - return TRUE; /* succeeded */ -} - - -/* - * Access methods for extended memory. - */ - -#if XMS_SUPPORTED - -static XMSDRIVER xms_driver; /* saved address of XMS driver */ - -typedef union { /* either long offset or real-mode pointer */ - long offset; - void far * ptr; - } XMSPTR; - -typedef struct { /* XMS move specification structure */ - long length; - XMSH src_handle; - XMSPTR src; - XMSH dst_handle; - XMSPTR dst; - } XMSspec; - -#define ODD(X) (((X) & 1L) != 0) - - -METHODDEF void -read_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = info->handle.xms_handle; - spec.src.offset = file_offset; - spec.dst_handle = 0; - spec.dst.ptr = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_READ); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; - } -} - - -METHODDEF void -write_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = 0; - spec.src.ptr = buffer_address; - spec.dst_handle = info->handle.xms_handle; - spec.dst.offset = file_offset; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_WRITE); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; - write_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - } -} - - -METHODDEF void -close_xms_store (j_common_ptr cinfo, backing_store_ptr info) -{ - XMScontext ctx; - - ctx.dx = info->handle.xms_handle; - ctx.ax = 0x0a00; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL boolean -open_xms_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - XMScontext ctx; - - /* Get address of XMS driver */ - jxms_getdriver((XMSDRIVER far *) & xms_driver); - if (xms_driver == NULL) - return FALSE; /* no driver to be had */ - - /* Get version number, must be >= 2.00 */ - ctx.ax = 0x0000; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax < (unsigned short) 0x0200) - return FALSE; - - /* Try to get space (expressed in kilobytes) */ - ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); - ctx.ax = 0x0900; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.xms_handle = ctx.dx; - info->read_backing_store = read_xms_store; - info->write_backing_store = write_xms_store; - info->close_backing_store = close_xms_store; - TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* XMS_SUPPORTED */ - - -/* - * Access methods for expanded memory. - */ - -#if EMS_SUPPORTED - -/* The EMS move specification structure requires word and long fields aligned - * at odd byte boundaries. Some compilers will align struct fields at even - * byte boundaries. While it's usually possible to force byte alignment, - * that causes an overall performance penalty and may pose problems in merging - * JPEG into a larger application. Instead we accept some rather dirty code - * here. Note this code would fail if the hardware did not allow odd-byte - * word & long accesses, but all 80x86 CPUs do. - */ - -typedef void far * EMSPTR; - -typedef union { /* EMS move specification structure */ - long length; /* It's easy to access first 4 bytes */ - char bytes[18]; /* Misaligned fields in here! */ - } EMSspec; - -/* Macros for accessing misaligned fields */ -#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) -#define SRC_TYPE(spec) FIELD_AT(spec,4,char) -#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) -#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) -#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) -#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) -#define DST_TYPE(spec) FIELD_AT(spec,11,char) -#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) -#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) -#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) -#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) - -#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ - -#define HIBYTE(W) (((W) >> 8) & 0xFF) -#define LOBYTE(W) ((W) & 0xFF) - - -METHODDEF void -read_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 1; - SRC_HANDLE(spec) = info->handle.ems_handle; - SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - DST_TYPE(spec) = 0; - DST_HANDLE(spec) = 0; - DST_PTR(spec) = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_READ); -} - - -METHODDEF void -write_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 0; - SRC_HANDLE(spec) = 0; - SRC_PTR(spec) = buffer_address; - DST_TYPE(spec) = 1; - DST_HANDLE(spec) = info->handle.ems_handle; - DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_WRITE); -} - - -METHODDEF void -close_ems_store (j_common_ptr cinfo, backing_store_ptr info) -{ - EMScontext ctx; - - ctx.ax = 0x4500; - ctx.dx = info->handle.ems_handle; - jems_calldriver((EMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL boolean -open_ems_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - EMScontext ctx; - - /* Is EMS driver there? */ - if (! jems_available()) - return FALSE; - - /* Get status, make sure EMS is OK */ - ctx.ax = 0x4000; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Get version, must be >= 4.0 */ - ctx.ax = 0x4600; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) - return FALSE; - - /* Try to allocate requested space */ - ctx.ax = 0x4300; - ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.ems_handle = ctx.dx; - info->read_backing_store = read_ems_store; - info->write_backing_store = write_ems_store; - info->close_backing_store = close_ems_store; - TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* EMS_SUPPORTED */ - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL void -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - /* Try extended memory, then expanded memory, then regular file. */ -#if XMS_SUPPORTED - if (open_xms_store(cinfo, info, total_bytes_needed)) - return; -#endif -#if EMS_SUPPORTED - if (open_ems_store(cinfo, info, total_bytes_needed)) - return; -#endif - if (open_file_store(cinfo, info, total_bytes_needed)) - return; - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL long -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL void -jpeg_mem_term (j_common_ptr cinfo) -{ - /* Microsoft C, at least in v6.00A, will not successfully reclaim freed - * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: - */ -#ifdef NEED_FHEAPMIN - _fheapmin(); -#endif -} diff --git a/third_party/jpeg-6/jmemmgr.c b/third_party/jpeg-6/jmemmgr.c deleted file mode 100644 index cc85636..0000000 --- a/third_party/jpeg-6/jmemmgr.c +++ /dev/null @@ -1,1115 +0,0 @@ -/* - * jmemmgr.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the JPEG system-independent memory management - * routines. This code is usable across a wide variety of machines; most - * of the system dependencies have been isolated in a separate file. - * The major functions provided here are: - * * pool-based allocation and freeing of memory; - * * policy decisions about how to divide available memory among the - * virtual arrays; - * * control logic for swapping virtual arrays between main memory and - * backing storage. - * The separate system-dependent file provides the actual backing-storage - * access code, and it contains the policy decision about how much total - * main memory to use. - * This file is system-dependent in the sense that some of its functions - * are unnecessary in some systems. For example, if there is enough virtual - * memory so that backing storage will never be used, much of the virtual - * array control logic could be removed. (Of course, if you have that much - * memory then you shouldn't care about a little bit of unused code...) - */ - -#define JPEG_INTERNALS -#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef NO_GETENV -#ifndef HAVE_STDLIB_H /* should declare getenv() */ -extern char * getenv JPP((const char * name)); -#endif -#endif - - -/* - * Some important notes: - * The allocation routines provided here must never return NULL. - * They should exit to error_exit if unsuccessful. - * - * It's not a good idea to try to merge the sarray and barray routines, - * even though they are textually almost the same, because samples are - * usually stored as bytes while coefficients are shorts or ints. Thus, - * in machines where byte pointers have a different representation from - * word pointers, the resulting machine code could not be the same. - */ - - -/* - * Many machines require storage alignment: longs must start on 4-byte - * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() - * always returns pointers that are multiples of the worst-case alignment - * requirement, and we had better do so too. - * There isn't any really portable way to determine the worst-case alignment - * requirement. This module assumes that the alignment requirement is - * multiples of sizeof(ALIGN_TYPE). - * By default, we define ALIGN_TYPE as double. This is necessary on some - * workstations (where doubles really do need 8-byte alignment) and will work - * fine on nearly everything. If your machine has lesser alignment needs, - * you can save a few bytes by making ALIGN_TYPE smaller. - * The only place I know of where this will NOT work is certain Macintosh - * 680x0 compilers that define double as a 10-byte IEEE extended float. - * Doing 10-byte alignment is counterproductive because longwords won't be - * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have - * such a compiler. - */ - -#ifndef ALIGN_TYPE /* so can override from jconfig.h */ -#define ALIGN_TYPE double -#endif - - -/* - * We allocate objects from "pools", where each pool is gotten with a single - * request to jpeg_get_small() or jpeg_get_large(). There is no per-object - * overhead within a pool, except for alignment padding. Each pool has a - * header with a link to the next pool of the same class. - * Small and large pool headers are identical except that the latter's - * link pointer must be FAR on 80x86 machines. - * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE - * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple - * of the alignment requirement of ALIGN_TYPE. - */ - -typedef union small_pool_struct * small_pool_ptr; - -typedef union small_pool_struct { - struct { - small_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} small_pool_hdr; - -typedef union large_pool_struct FAR * large_pool_ptr; - -typedef union large_pool_struct { - struct { - large_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} large_pool_hdr; - - -/* - * Here is the full definition of a memory manager object. - */ - -typedef struct { - struct jpeg_memory_mgr pub; /* public fields */ - - /* Each pool identifier (lifetime class) names a linked list of pools. */ - small_pool_ptr small_list[JPOOL_NUMPOOLS]; - large_pool_ptr large_list[JPOOL_NUMPOOLS]; - - /* Since we only have one lifetime class of virtual arrays, only one - * linked list is necessary (for each datatype). Note that the virtual - * array control blocks being linked together are actually stored somewhere - * in the small-pool list. - */ - jvirt_sarray_ptr virt_sarray_list; - jvirt_barray_ptr virt_barray_list; - - /* This counts total space obtained from jpeg_get_small/large */ - long total_space_allocated; - - /* alloc_sarray and alloc_barray set this value for use by virtual - * array routines. - */ - JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ -} my_memory_mgr; - -typedef my_memory_mgr * my_mem_ptr; - - -/* - * The control blocks for virtual arrays. - * Note that these blocks are allocated in the "small" pool area. - * System-dependent info for the associated backing store (if any) is hidden - * inside the backing_store_info struct. - */ - -struct jvirt_sarray_control { - JSAMPARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_sarray_ptr next; /* link to next virtual sarray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - -struct jvirt_barray_control { - JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_barray_ptr next; /* link to next virtual barray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - - -#ifdef MEM_STATS /* optional extra stuff for statistics */ - -LOCAL void -print_mem_stats (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - - /* Since this is only a debugging stub, we can cheat a little by using - * fprintf directly rather than going through the trace message code. - * This is helpful because message parm array can't handle longs. - */ - fprintf(stderr, "Freeing pool %d, total space = %ld\n", - pool_id, mem->total_space_allocated); - - for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; - lhdr_ptr = lhdr_ptr->hdr.next) { - fprintf(stderr, " Large chunk used %ld\n", - (long) lhdr_ptr->hdr.bytes_used); - } - - for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; - shdr_ptr = shdr_ptr->hdr.next) { - fprintf(stderr, " Small chunk used %ld free %ld\n", - (long) shdr_ptr->hdr.bytes_used, - (long) shdr_ptr->hdr.bytes_left); - } -} - -#endif /* MEM_STATS */ - - -LOCAL void -out_of_memory (j_common_ptr cinfo, int which) -/* Report an out-of-memory error and stop execution */ -/* If we compiled MEM_STATS support, report alloc requests before dying */ -{ -#ifdef MEM_STATS - cinfo->err->trace_level = 2; /* force self_destruct to report stats */ -#endif - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); -} - - -/* - * Allocation of "small" objects. - * - * For these, we use pooled storage. When a new pool must be created, - * we try to get enough space for the current request plus a "slop" factor, - * where the slop will be the amount of leftover space in the new pool. - * The speed vs. space tradeoff is largely determined by the slop values. - * A different slop value is provided for each pool class (lifetime), - * and we also distinguish the first pool of a class from later ones. - * NOTE: the values given work fairly well on both 16- and 32-bit-int - * machines, but may be too small if longs are 64 bits or more. - */ - -static const size_t first_pool_slop[JPOOL_NUMPOOLS] = -{ - 1600, /* first PERMANENT pool */ - 16000 /* first IMAGE pool */ -}; - -static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = -{ - 0, /* additional PERMANENT pools */ - 5000 /* additional IMAGE pools */ -}; - -#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ - - -METHODDEF void * -alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "small" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr hdr_ptr, prev_hdr_ptr; - char * data_ptr; - size_t odd_bytes, min_request, slop; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) - out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* See if space is available in any existing pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - prev_hdr_ptr = NULL; - hdr_ptr = mem->small_list[pool_id]; - while (hdr_ptr != NULL) { - if (hdr_ptr->hdr.bytes_left >= sizeofobject) - break; /* found pool with enough space */ - prev_hdr_ptr = hdr_ptr; - hdr_ptr = hdr_ptr->hdr.next; - } - - /* Time to make a new pool? */ - if (hdr_ptr == NULL) { - /* min_request is what we need now, slop is what will be leftover */ - min_request = sizeofobject + SIZEOF(small_pool_hdr); - if (prev_hdr_ptr == NULL) /* first pool in class? */ - slop = first_pool_slop[pool_id]; - else - slop = extra_pool_slop[pool_id]; - /* Don't ask for more than MAX_ALLOC_CHUNK */ - if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) - slop = (size_t) (MAX_ALLOC_CHUNK-min_request); - /* Try to get space, if fail reduce slop and try again */ - for (;;) { - hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); - if (hdr_ptr != NULL) - break; - slop /= 2; - if (slop < MIN_SLOP) /* give up when it gets real small */ - out_of_memory(cinfo, 2); /* jpeg_get_small failed */ - } - mem->total_space_allocated += (int)min_request + (int)slop; - /* Success, initialize the new pool header and add to end of list */ - hdr_ptr->hdr.next = NULL; - hdr_ptr->hdr.bytes_used = 0; - hdr_ptr->hdr.bytes_left = sizeofobject + slop; - if (prev_hdr_ptr == NULL) /* first pool in class? */ - mem->small_list[pool_id] = hdr_ptr; - else - prev_hdr_ptr->hdr.next = hdr_ptr; - } - - /* OK, allocate the object from the current pool */ - data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ - data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ - hdr_ptr->hdr.bytes_used += sizeofobject; - hdr_ptr->hdr.bytes_left -= sizeofobject; - - return (void *) data_ptr; -} - - -/* - * Allocation of "large" objects. - * - * The external semantics of these are the same as "small" objects, - * except that FAR pointers are used on 80x86. However the pool - * management heuristics are quite different. We assume that each - * request is large enough that it may as well be passed directly to - * jpeg_get_large; the pool management just links everything together - * so that we can free it all on demand. - * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY - * structures. The routines that create these structures (see below) - * deliberately bunch rows together to ensure a large request size. - */ - -METHODDEF void FAR * -alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "large" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - large_pool_ptr hdr_ptr; - size_t odd_bytes; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) - out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* Always make a new pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + - SIZEOF(large_pool_hdr)); - if (hdr_ptr == NULL) - out_of_memory(cinfo, 4); /* jpeg_get_large failed */ - mem->total_space_allocated += (int)sizeofobject + (int)SIZEOF(large_pool_hdr); - - /* Success, initialize the new pool header and add to list */ - hdr_ptr->hdr.next = mem->large_list[pool_id]; - /* We maintain space counts in each pool header for statistical purposes, - * even though they are not needed for allocation. - */ - hdr_ptr->hdr.bytes_used = sizeofobject; - hdr_ptr->hdr.bytes_left = 0; - mem->large_list[pool_id] = hdr_ptr; - - return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ -} - - -/* - * Creation of 2-D sample arrays. - * The pointers are in near heap, the samples themselves in FAR heap. - * - * To minimize allocation overhead and to allow I/O of large contiguous - * blocks, we allocate the sample rows in groups of as many rows as possible - * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. - * NB: the virtual array control routines, later in this file, know about - * this chunking of rows. The rowsperchunk value is left in the mem manager - * object so that it can be saved away if this sarray is the workspace for - * a virtual array. - */ - -METHODDEF JSAMPARRAY -alloc_sarray (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, JDIMENSION numrows) -/* Allocate a 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JSAMPARRAY result; - JSAMPROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) samplesperrow * SIZEOF(JSAMPLE)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JSAMPARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JSAMPROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JSAMPROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow - * SIZEOF(JSAMPLE))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += samplesperrow; - } - } - - return result; -} - - -/* - * Creation of 2-D coefficient-block arrays. - * This is essentially the same as the code for sample arrays, above. - */ - -METHODDEF JBLOCKARRAY -alloc_barray (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, JDIMENSION numrows) -/* Allocate a 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JBLOCKARRAY result; - JBLOCKROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) blocksperrow * SIZEOF(JBLOCK)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JBLOCKROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow - * SIZEOF(JBLOCK))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += blocksperrow; - } - } - - return result; -} - - -/* - * About virtual array management: - * - * The above "normal" array routines are only used to allocate strip buffers - * (as wide as the image, but just a few rows high). Full-image-sized buffers - * are handled as "virtual" arrays. The array is still accessed a strip at a - * time, but the memory manager must save the whole array for repeated - * accesses. The intended implementation is that there is a strip buffer in - * memory (as high as is possible given the desired memory limit), plus a - * backing file that holds the rest of the array. - * - * The request_virt_array routines are told the total size of the image and - * the maximum number of rows that will be accessed at once. The in-memory - * buffer must be at least as large as the maxaccess value. - * - * The request routines create control blocks but not the in-memory buffers. - * That is postponed until realize_virt_arrays is called. At that time the - * total amount of space needed is known (approximately, anyway), so free - * memory can be divided up fairly. - * - * The access_virt_array routines are responsible for making a specific strip - * area accessible (after reading or writing the backing file, if necessary). - * Note that the access routines are told whether the caller intends to modify - * the accessed strip; during a read-only pass this saves having to rewrite - * data to disk. The access routines are also responsible for pre-zeroing - * any newly accessed rows, if pre-zeroing was requested. - * - * In current usage, the access requests are usually for nonoverlapping - * strips; that is, successive access start_row numbers differ by exactly - * num_rows = maxaccess. This means we can get good performance with simple - * buffer dump/reload logic, by making the in-memory buffer be a multiple - * of the access height; then there will never be accesses across bufferload - * boundaries. The code will still work with overlapping access requests, - * but it doesn't handle bufferload overlaps very efficiently. - */ - - -METHODDEF jvirt_sarray_ptr -request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION samplesperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_sarray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_sarray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->samplesperrow = samplesperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ - mem->virt_sarray_list = result; - - return result; -} - - -METHODDEF jvirt_barray_ptr -request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION blocksperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_barray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_barray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->blocksperrow = blocksperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_barray_list; /* add to list of virtual arrays */ - mem->virt_barray_list = result; - - return result; -} - - -METHODDEF void -realize_virt_arrays (j_common_ptr cinfo) -/* Allocate the in-memory buffers for any unrealized virtual arrays */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - long space_per_minheight, maximum_space, avail_mem; - long minheights, max_minheights; - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - /* Compute the minimum space needed (maxaccess rows in each buffer) - * and the maximum space needed (full image height in each buffer). - * These may be of use to the system-dependent jpeg_mem_available routine. - */ - space_per_minheight = 0; - maximum_space = 0; - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) sptr->maxaccess * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - maximum_space += (long) sptr->rows_in_array * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - } - } - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) bptr->maxaccess * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - maximum_space += (long) bptr->rows_in_array * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - } - } - - if (space_per_minheight <= 0) - return; /* no unrealized arrays, no work */ - - /* Determine amount of memory to actually use; this is system-dependent. */ - avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, - mem->total_space_allocated); - - /* If the maximum space needed is available, make all the buffers full - * height; otherwise parcel it out with the same number of minheights - * in each buffer. - */ - if (avail_mem >= maximum_space) - max_minheights = 1000000000L; - else { - max_minheights = avail_mem / space_per_minheight; - /* If there doesn't seem to be enough space, try to get the minimum - * anyway. This allows a "stub" implementation of jpeg_mem_available(). - */ - if (max_minheights <= 0) - max_minheights = 1; - } - - /* Allocate the in-memory buffers and initialize backing store as needed. */ - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - sptr->rows_in_mem = sptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); - jpeg_open_backing_store(cinfo, & sptr->b_s_info, - (long) sptr->rows_in_array * - (long) sptr->samplesperrow * - (long) SIZEOF(JSAMPLE)); - sptr->b_s_open = TRUE; - } - sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, - sptr->samplesperrow, sptr->rows_in_mem); - sptr->rowsperchunk = mem->last_rowsperchunk; - sptr->cur_start_row = 0; - sptr->first_undef_row = 0; - sptr->dirty = FALSE; - } - } - - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - bptr->rows_in_mem = bptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); - jpeg_open_backing_store(cinfo, & bptr->b_s_info, - (long) bptr->rows_in_array * - (long) bptr->blocksperrow * - (long) SIZEOF(JBLOCK)); - bptr->b_s_open = TRUE; - } - bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, - bptr->blocksperrow, bptr->rows_in_mem); - bptr->rowsperchunk = mem->last_rowsperchunk; - bptr->cur_start_row = 0; - bptr->first_undef_row = 0; - bptr->dirty = FALSE; - } - } -} - - -LOCAL void -do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual sample array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -LOCAL void -do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual coefficient-block array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -METHODDEF JSAMPARRAY -access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual sample array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_sarray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_sarray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -METHODDEF JBLOCKARRAY -access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual block array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_barray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_barray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -/* - * Release all objects belonging to a specified pool. - */ - -METHODDEF void -free_pool (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - size_t space_freed; - - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - -#ifdef MEM_STATS - if (cinfo->err->trace_level > 1) - print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ -#endif - - /* If freeing IMAGE pool, close any virtual arrays first */ - if (pool_id == JPOOL_IMAGE) { - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->b_s_open) { /* there may be no backing store */ - sptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); - } - } - mem->virt_sarray_list = NULL; - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->b_s_open) { /* there may be no backing store */ - bptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); - } - } - mem->virt_barray_list = NULL; - } - - /* Release large objects */ - lhdr_ptr = mem->large_list[pool_id]; - mem->large_list[pool_id] = NULL; - - while (lhdr_ptr != NULL) { - large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; - space_freed = lhdr_ptr->hdr.bytes_used + - lhdr_ptr->hdr.bytes_left + - SIZEOF(large_pool_hdr); - jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); - mem->total_space_allocated -= (int)space_freed; - lhdr_ptr = next_lhdr_ptr; - } - - /* Release small objects */ - shdr_ptr = mem->small_list[pool_id]; - mem->small_list[pool_id] = NULL; - - while (shdr_ptr != NULL) { - small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; - space_freed = shdr_ptr->hdr.bytes_used + - shdr_ptr->hdr.bytes_left + - SIZEOF(small_pool_hdr); - jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); - mem->total_space_allocated -= (int)space_freed; - shdr_ptr = next_shdr_ptr; - } -} - - -/* - * Close up shop entirely. - * Note that this cannot be called unless cinfo->mem is non-NULL. - */ - -METHODDEF void -self_destruct (j_common_ptr cinfo) -{ - int pool; - - /* Close all backing store, release all memory. - * Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - free_pool(cinfo, pool); - } - - /* Release the memory manager control block too. */ - jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); - cinfo->mem = NULL; /* ensures I will be called only once */ - - jpeg_mem_term(cinfo); /* system-dependent cleanup */ -} - - -/* - * Memory manager initialization. - * When this is called, only the error manager pointer is valid in cinfo! - */ - -GLOBAL void -jinit_memory_mgr (j_common_ptr cinfo) -{ - my_mem_ptr mem; - long max_to_use; - int pool; - size_t test_mac; - - cinfo->mem = NULL; /* for safety if init fails */ - - /* Check for configuration errors. - * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably - * doesn't reflect any real hardware alignment requirement. - * The test is a little tricky: for X>0, X and X-1 have no one-bits - * in common if and only if X is a power of 2, ie has only one one-bit. - * Some compilers may give an "unreachable code" warning here; ignore it. - */ - if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) - ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); - /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be - * a multiple of SIZEOF(ALIGN_TYPE). - * Again, an "unreachable code" warning may be ignored here. - * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. - */ - test_mac = (size_t) MAX_ALLOC_CHUNK; - if ((long) test_mac != MAX_ALLOC_CHUNK || - (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - - max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ - - /* Attempt to allocate memory manager's control block */ - mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); - - if (mem == NULL) { - jpeg_mem_term(cinfo); /* system-dependent cleanup */ - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); - } - - /* OK, fill in the method pointers */ - mem->pub.alloc_small = alloc_small; - mem->pub.alloc_large = alloc_large; - mem->pub.alloc_sarray = alloc_sarray; - mem->pub.alloc_barray = alloc_barray; - mem->pub.request_virt_sarray = request_virt_sarray; - mem->pub.request_virt_barray = request_virt_barray; - mem->pub.realize_virt_arrays = realize_virt_arrays; - mem->pub.access_virt_sarray = access_virt_sarray; - mem->pub.access_virt_barray = access_virt_barray; - mem->pub.free_pool = free_pool; - mem->pub.self_destruct = self_destruct; - - /* Initialize working state */ - mem->pub.max_memory_to_use = max_to_use; - - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - mem->small_list[pool] = NULL; - mem->large_list[pool] = NULL; - } - mem->virt_sarray_list = NULL; - mem->virt_barray_list = NULL; - - mem->total_space_allocated = SIZEOF(my_memory_mgr); - - /* Declare ourselves open for business */ - cinfo->mem = & mem->pub; - - /* Check for an environment variable JPEGMEM; if found, override the - * default max_memory setting from jpeg_mem_init. Note that the - * surrounding application may again override this value. - * If your system doesn't support getenv(), define NO_GETENV to disable - * this feature. - */ -#ifndef NO_GETENV - { char * memenv; - - if ((memenv = getenv("JPEGMEM")) != NULL) { - char ch = 'x'; - - if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { - if (ch == 'm' || ch == 'M') - max_to_use *= 1000L; - mem->pub.max_memory_to_use = max_to_use * 1000L; - } - } - } -#endif - -} diff --git a/third_party/jpeg-6/jmemname.c b/third_party/jpeg-6/jmemname.c deleted file mode 100644 index ba826fb..0000000 --- a/third_party/jpeg-6/jmemname.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * jmemname.c - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a generic implementation of the system-dependent - * portion of the JPEG memory manager. This implementation assumes that - * you must explicitly construct a name for each temp file. - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define RW_BINARY "w+" -#else -#define READ_BINARY "rb" -#define RW_BINARY "w+b" -#endif - - -/* - * Selection of a file name for a temporary file. - * This is system-dependent! - * - * The code as given is suitable for most Unix systems, and it is easily - * modified for most non-Unix systems. Some notes: - * 1. The temp file is created in the directory named by TEMP_DIRECTORY. - * The default value is /usr/tmp, which is the conventional place for - * creating large temp files on Unix. On other systems you'll probably - * want to change the file location. You can do this by editing the - * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. - * - * 2. If you need to change the file name as well as its location, - * you can override the TEMP_FILE_NAME macro. (Note that this is - * actually a printf format string; it must contain %s and %d.) - * Few people should need to do this. - * - * 3. mktemp() is used to ensure that multiple processes running - * simultaneously won't select the same file names. If your system - * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. - * (If you don't have , also define NO_ERRNO_H.) - * - * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c - * will cause the temp files to be removed if you stop the program early. - */ - -#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ -#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ -#endif - -static int next_file_num; /* to distinguish among several temp files */ - -#ifdef NO_MKTEMP - -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%03d.TMP" -#endif - -#ifndef NO_ERRNO_H -#include /* to define ENOENT */ -#endif - -/* ANSI C specifies that errno is a macro, but on older systems it's more - * likely to be a plain int variable. And not all versions of errno.h - * bother to declare it, so we have to in order to be most portable. Thus: - */ -#ifndef errno -extern int errno; -#endif - - -LOCAL void -select_file_name (char * fname) -{ - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - if ((tfile = fopen(fname, READ_BINARY)) == NULL) { - /* fopen could have failed for a reason other than the file not - * being there; for example, file there but unreadable. - * If isn't available, then we cannot test the cause. - */ -#ifdef ENOENT - if (errno != ENOENT) - continue; -#endif - break; - } - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - -#else /* ! NO_MKTEMP */ - -/* Note that mktemp() requires the initial filename to end in six X's */ -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%dXXXXXX" -#endif - -LOCAL void -select_file_name (char * fname) -{ - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - mktemp(fname); /* make sure file name is unique */ - /* mktemp replaces the trailing XXXXXX with a unique string of characters */ -} - -#endif /* NO_MKTEMP */ - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL void * -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL void FAR * -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL void -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL long -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF void -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF void -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF void -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); /* close the file */ - unlink(info->temp_name); /* delete the file */ -/* If your system doesn't have unlink(), use remove() instead. - * remove() is the ANSI-standard name for this function, but if - * your system was ANSI you'd be using jmemansi.c, right? - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL void -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - select_file_name(info->temp_name); - if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL long -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL void -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/third_party/jpeg-6/jmemnobs.c b/third_party/jpeg-6/jmemnobs.c deleted file mode 100644 index ba19443..0000000 --- a/third_party/jpeg-6/jmemnobs.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * jmemnobs.c - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a really simple implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that no backing-store files are needed: all required space - * can be obtained from ri.Malloc(). - * This is very portable in the sense that it'll compile on almost anything, - * but you'd better have lots of main memory (or virtual memory) if you want - * to process big images. - * Note that the max_memory_to_use option is ignored by this implementation. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#include "../../source/engine/renderer/tr_local.h" - -/* - * Memory allocation and ri.Freeing are controlled by the regular library - * routines ri.Malloc() and ri.Free(). - */ - -GLOBAL void * -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) ri.Malloc((int)sizeofobject); -} - -GLOBAL void -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - ri.Free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL void FAR * -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) ri.Malloc((int)sizeofobject); -} - -GLOBAL void -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - ri.Free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * Here we always say, "we got all you want bud!" - */ - -GLOBAL long -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return max_bytes_needed; -} - - -/* - * Backing store (temporary file) management. - * Since jpeg_mem_available always promised the moon, - * this should never be called and we can just error out. - */ - -GLOBAL void -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - ERREXIT(cinfo, JERR_NO_BACKING_STORE); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. Here, there isn't any. - */ - -GLOBAL long -jpeg_mem_init (j_common_ptr cinfo) -{ - return 0; /* just set max_memory_to_use to 0 */ -} - -GLOBAL void -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/third_party/jpeg-6/jmemsys.h b/third_party/jpeg-6/jmemsys.h deleted file mode 100644 index 033d29a..0000000 --- a/third_party/jpeg-6/jmemsys.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * jmemsys.h - * - * Copyright (C) 1992-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file defines the interface between the system-independent - * and system-dependent portions of the JPEG memory manager. No other - * modules need include it. (The system-independent portion is jmemmgr.c; - * there are several different versions of the system-dependent portion.) - * - * This file works as-is for the system-dependent memory managers supplied - * in the IJG distribution. You may need to modify it if you write a - * custom memory manager. If system-dependent changes are needed in - * this file, the best method is to #ifdef them based on a configuration - * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR. - */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_get_small jGetSmall -#define jpeg_free_small jFreeSmall -#define jpeg_get_large jGetLarge -#define jpeg_free_large jFreeLarge -#define jpeg_mem_available jMemAvail -#define jpeg_open_backing_store jOpenBackStore -#define jpeg_mem_init jMemInit -#define jpeg_mem_term jMemTerm -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * These two functions are used to allocate and release small chunks of - * memory. (Typically the total amount requested through jpeg_get_small is - * no more than 20K or so; this will be requested in chunks of a few K each.) - * Behavior should be the same as for the standard library functions malloc - * and free; in particular, jpeg_get_small must return NULL on failure. - * On most systems, these ARE malloc and free. jpeg_free_small is passed the - * size of the object being freed, just in case it's needed. - * On an 80x86 machine using small-data memory model, these manage near heap. - */ - -EXTERN void * jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); -EXTERN void jpeg_free_small JPP((j_common_ptr cinfo, void * object, - size_t sizeofobject)); - -/* - * These two functions are used to allocate and release large chunks of - * memory (up to the total free space designated by jpeg_mem_available). - * The interface is the same as above, except that on an 80x86 machine, - * far pointers are used. On most other machines these are identical to - * the jpeg_get/free_small routines; but we keep them separate anyway, - * in case a different allocation strategy is desirable for large chunks. - */ - -EXTERN void FAR * jpeg_get_large JPP((j_common_ptr cinfo,size_t sizeofobject)); -EXTERN void jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, - size_t sizeofobject)); - -/* - * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may - * be requested in a single call to jpeg_get_large (and jpeg_get_small for that - * matter, but that case should never come into play). This macro is needed - * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. - * On those machines, we expect that jconfig.h will provide a proper value. - * On machines with 32-bit flat address spaces, any large constant may be used. - * - * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type - * size_t and will be a multiple of sizeof(align_type). - */ - -#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ -#define MAX_ALLOC_CHUNK 1000000000L -#endif - -/* - * This routine computes the total space still available for allocation by - * jpeg_get_large. If more space than this is needed, backing store will be - * used. NOTE: any memory already allocated must not be counted. - * - * There is a minimum space requirement, corresponding to the minimum - * feasible buffer sizes; jmemmgr.c will request that much space even if - * jpeg_mem_available returns zero. The maximum space needed, enough to hold - * all working storage in memory, is also passed in case it is useful. - * Finally, the total space already allocated is passed. If no better - * method is available, cinfo->mem->max_memory_to_use - already_allocated - * is often a suitable calculation. - * - * It is OK for jpeg_mem_available to underestimate the space available - * (that'll just lead to more backing-store access than is really necessary). - * However, an overestimate will lead to failure. Hence it's wise to subtract - * a slop factor from the true available space. 5% should be enough. - * - * On machines with lots of virtual memory, any large constant may be returned. - * Conversely, zero may be returned to always use the minimum amount of memory. - */ - -EXTERN long jpeg_mem_available JPP((j_common_ptr cinfo, - long min_bytes_needed, - long max_bytes_needed, - long already_allocated)); - - -/* - * This structure holds whatever state is needed to access a single - * backing-store object. The read/write/close method pointers are called - * by jmemmgr.c to manipulate the backing-store object; all other fields - * are private to the system-dependent backing store routines. - */ - -#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ - -#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ - -typedef unsigned short XMSH; /* type of extended-memory handles */ -typedef unsigned short EMSH; /* type of expanded-memory handles */ - -typedef union { - short file_handle; /* DOS file handle if it's a temp file */ - XMSH xms_handle; /* handle if it's a chunk of XMS */ - EMSH ems_handle; /* handle if it's a chunk of EMS */ -} handle_union; - -#endif /* USE_MSDOS_MEMMGR */ - -typedef struct backing_store_struct * backing_store_ptr; - -typedef struct backing_store_struct { - /* Methods for reading/writing/closing this backing-store object */ - JMETHOD(void, read_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, write_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, close_backing_store, (j_common_ptr cinfo, - backing_store_ptr info)); - - /* Private fields for system-dependent backing-store management */ -#ifdef USE_MSDOS_MEMMGR - /* For the MS-DOS manager (jmemdos.c), we need: */ - handle_union handle; /* reference to backing-store storage object */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else - /* For a typical implementation with temp files, we need: */ - FILE * temp_file; /* stdio reference to temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ -#endif -} backing_store_info; - -/* - * Initial opening of a backing-store object. This must fill in the - * read/write/close pointers in the object. The read/write routines - * may take an error exit if the specified maximum file size is exceeded. - * (If jpeg_mem_available always returns a large value, this routine can - * just take an error exit.) - */ - -EXTERN void jpeg_open_backing_store JPP((j_common_ptr cinfo, - backing_store_ptr info, - long total_bytes_needed)); - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. jpeg_mem_init will be called before anything is - * allocated (and, therefore, nothing in cinfo is of use except the error - * manager pointer). It should return a suitable default value for - * max_memory_to_use; this may subsequently be overridden by the surrounding - * application. (Note that max_memory_to_use is only important if - * jpeg_mem_available chooses to consult it ... no one else will.) - * jpeg_mem_term may assume that all requested memory has been freed and that - * all opened backing-store objects have been closed. - */ - -EXTERN long jpeg_mem_init JPP((j_common_ptr cinfo)); -EXTERN void jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/third_party/jpeg-6/jmorecfg.h b/third_party/jpeg-6/jmorecfg.h deleted file mode 100644 index 6209f51..0000000 --- a/third_party/jpeg-6/jmorecfg.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * jmorecfg.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains additional configuration options that customize the - * JPEG software for special applications or support machine-dependent - * optimizations. Most users will not need to touch this file. - */ - - -/* - * Define BITS_IN_JSAMPLE as either - * 8 for 8-bit sample values (the usual setting) - * 12 for 12-bit sample values - * Only 8 and 12 are legal data precisions for lossy JPEG according to the - * JPEG standard, and the IJG code does not support anything else! - * We do not support run-time selection of data precision, sorry. - */ - -#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ - - -/* - * Maximum number of components (color channels) allowed in JPEG image. - * To meet the letter of the JPEG spec, set this to 255. However, darn - * few applications need more than 4 channels (maybe 5 for CMYK + alpha - * mask). We recommend 10 as a reasonable compromise; use 4 if you are - * really short on memory. (Each allowed component costs a hundred or so - * bytes of storage, whether actually used in an image or not.) - */ - -#define MAX_COMPONENTS 10 /* maximum number of image components */ - - -/* - * Basic data types. - * You may need to change these if you have a machine with unusual data - * type sizes; for example, "char" not 8 bits, "short" not 16 bits, - * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, - * but it had better be at least 16. - */ - -/* Representation of a single sample (pixel element value). - * We frequently allocate large arrays of these, so it's important to keep - * them small. But if you have memory to burn and access to char or short - * arrays is very slow on your hardware, you might want to change these. - */ - -#if BITS_IN_JSAMPLE == 8 -/* JSAMPLE should be the smallest type that will hold the values 0..255. - * You can use a signed char by having GETJSAMPLE mask it with 0xFF. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JSAMPLE; -#ifdef CHAR_IS_UNSIGNED -#define GETJSAMPLE(value) ((int) (value)) -#else -#define GETJSAMPLE(value) ((int) (value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - -#define MAXJSAMPLE 255 -#define CENTERJSAMPLE 128 - -#endif /* BITS_IN_JSAMPLE == 8 */ - - -#if BITS_IN_JSAMPLE == 12 -/* JSAMPLE should be the smallest type that will hold the values 0..4095. - * On nearly all machines "short" will do nicely. - */ - -typedef short JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#define MAXJSAMPLE 4095 -#define CENTERJSAMPLE 2048 - -#endif /* BITS_IN_JSAMPLE == 12 */ - - -/* Representation of a DCT frequency coefficient. - * This should be a signed value of at least 16 bits; "short" is usually OK. - * Again, we allocate large arrays of these, but you can change to int - * if you have memory to burn and "short" is really slow. - */ - -typedef short JCOEF; - - -/* Compressed datastreams are represented as arrays of JOCTET. - * These must be EXACTLY 8 bits wide, at least once they are written to - * external storage. Note that when using the stdio data source/destination - * managers, this is also the data type passed to fread/fwrite. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JOCTET; -#define GETJOCTET(value) (value) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JOCTET; -#ifdef CHAR_IS_UNSIGNED -#define GETJOCTET(value) (value) -#else -#define GETJOCTET(value) ((value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - - -/* These typedefs are used for various table entries and so forth. - * They must be at least as wide as specified; but making them too big - * won't cost a huge amount of memory, so we don't provide special - * extraction code like we did for JSAMPLE. (In other words, these - * typedefs live at a different point on the speed/space tradeoff curve.) - */ - -/* UINT8 must hold at least the values 0..255. */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char UINT8; -#else /* not HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char UINT8; -#else /* not CHAR_IS_UNSIGNED */ -typedef short UINT8; -#endif /* CHAR_IS_UNSIGNED */ -#endif /* HAVE_UNSIGNED_CHAR */ - -/* UINT16 must hold at least the values 0..65535. */ - -#ifdef HAVE_UNSIGNED_SHORT -typedef unsigned short UINT16; -#else /* not HAVE_UNSIGNED_SHORT */ -typedef unsigned int UINT16; -#endif /* HAVE_UNSIGNED_SHORT */ - -typedef long JPEG_INT32; - -/* INT16 must hold at least the values -32768..32767. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ -typedef short INT16; -#endif - -/* JPEG_INT32 must hold at least signed 32-bit values. */ - -//#ifndef XMD_H /* X11/xmd.h correctly defines JPEG_INT32 */ -//typedef long JPEG_INT32; -//#endif - -/* Datatype used for image dimensions. The JPEG standard only supports - * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore - * "unsigned int" is sufficient on all machines. However, if you need to - * handle larger images and you don't mind deviating from the spec, you - * can change this datatype. - */ - -typedef unsigned int JDIMENSION; - -#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ - - -/* These defines are used in all function definitions and extern declarations. - * You could modify them if you need to change function linkage conventions. - * Another application is to make all functions global for use with debuggers - * or code profilers that require it. - */ - -#define METHODDEF static /* a function called through method pointers */ -#define LOCAL static /* a function used only in its module */ -#define GLOBAL /* a function referenced thru EXTERNs */ -#define EXTERN extern /* a reference to a GLOBAL function */ - - -/* Here is the pseudo-keyword for declaring pointers that must be "far" - * on 80x86 machines. Most of the specialized coding for 80x86 is handled - * by just saying "FAR *" where such a pointer is needed. In a few places - * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. - */ - -#ifdef NEED_FAR_POINTERS -#undef FAR -#define FAR far -#else -#undef FAR -#define FAR -#endif - - -/* - * On a few systems, type boolean and/or its values FALSE, TRUE may appear - * in standard header files. Or you may have conflicts with application- - * specific header files that you want to include together with these files. - * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. - */ - -//#ifndef HAVE_BOOLEAN -//typedef int boolean; -//#endif -#ifndef FALSE /* in case these macros already exist */ -#define FALSE 0 /* values of boolean */ -#endif -#ifndef TRUE -#define TRUE 1 -#endif - - -/* - * The remaining options affect code selection within the JPEG library, - * but they don't need to be visible to most applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. - */ - -#ifdef JPEG_INTERNALS -#define JPEG_INTERNAL_OPTIONS -#endif - -#ifdef JPEG_INTERNAL_OPTIONS - - -/* - * These defines indicate whether to include various optional functions. - * Undefining some of these symbols will produce a smaller but less capable - * library. Note that you can leave certain source files out of the - * compilation/linking process if you've #undef'd the corresponding symbols. - * (You may HAVE to do that if your compiler doesn't like null source files.) - */ - -/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ - -/* Capability options common to encoder and decoder: */ - -#undef DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ -#undef DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ -#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ - -/* Encoder capability options: */ - -#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ -/* Note: if you selected 12-bit data precision, it is dangerous to turn off - * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit - * precision, so jchuff.c normally uses entropy optimization to compute - * usable tables for higher precision. If you don't want to do optimization, - * you'll have to supply different default Huffman tables. - * The exact same statements apply for progressive JPEG: the default tables - * don't work for progressive mode. (This may get fixed, however.) - */ -#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ - -/* Decoder capability options: */ - -#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#undef D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#undef D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#undef BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ -#undef IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ -#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ -#undef UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ -#undef QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ -#undef QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ - -/* more capability options later, no doubt */ - - -/* - * Ordering of RGB data in scanlines passed to or from the application. - * If your application wants to deal with data in the order B,G,R, just - * change these macros. You can also deal with formats such as R,G,B,X - * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing - * the offsets will also change the order in which colormap data is organized. - * RESTRICTIONS: - * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. - * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not - * useful if you are using JPEG color spaces other than YCbCr or grayscale. - * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE - * is not 3 (they don't understand about dummy color components!). So you - * can't use color quantization if you change that value. - */ - -#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ -#define RGB_GREEN 1 /* Offset of Green */ -#define RGB_BLUE 2 /* Offset of Blue */ -#define RGB_PIXELSIZE 4 /* JSAMPLEs per RGB scanline element */ - - -/* Definitions for speed-related optimizations. */ - - -/* If your compiler supports inline functions, define INLINE - * as the inline keyword; otherwise define it as empty. - */ - -#ifndef INLINE -#ifdef __GNUC__ /* for instance, GNU C knows about inline */ -#define INLINE __inline__ -#endif -#ifndef INLINE -#define INLINE /* default is to define it as empty */ -#endif -#endif - - -/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying - * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER - * as short on such a machine. MULTIPLIER must be at least 16 bits wide. - */ - -#ifndef MULTIPLIER -#define MULTIPLIER int /* type for fastest integer multiply */ -#endif - - -/* FAST_FLOAT should be either float or double, whichever is done faster - * by your compiler. (Note that this type is only used in the floating point - * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) - * Typically, float is faster in ANSI C compilers, while double is faster in - * pre-ANSI compilers (because they insist on converting to double anyway). - * The code below therefore chooses float if we have ANSI-style prototypes. - */ - -#ifndef FAST_FLOAT -#ifdef HAVE_PROTOTYPES -#define FAST_FLOAT float -#else -#define FAST_FLOAT double -#endif -#endif - -#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/third_party/jpeg-6/jpegint.h b/third_party/jpeg-6/jpegint.h deleted file mode 100644 index 031f4b3..0000000 --- a/third_party/jpeg-6/jpegint.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - * jpegint.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides common declarations for the various JPEG modules. - * These declarations are considered internal to the JPEG library; most - * applications using the library shouldn't need to include this file. - */ - - -/* Declarations for both compression & decompression */ - -typedef enum { /* Operating modes for buffer controllers */ - JBUF_PASS_THRU, /* Plain stripwise operation */ - /* Remaining modes require a full-image buffer to have been created */ - JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ - JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ - JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ -} J_BUF_MODE; - -/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ -#define CSTATE_START 100 /* after create_compress */ -#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ -#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ -#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ -#define DSTATE_START 200 /* after create_decompress */ -#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ -#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ -#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ -#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ -#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ -#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ -#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ -#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ -#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ -#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ - - -/* Declarations for compression modules */ - -/* Master control module */ -struct jpeg_comp_master { - JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); - JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean call_pass_startup; /* True if pass_startup must be called */ - boolean is_last_pass; /* True during last pass */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_c_main_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail)); -}; - -/* Compression preprocessing (downsampling input buffer control) */ -struct jpeg_c_prep_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, - JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_c_coef_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf)); -}; - -/* Colorspace conversion */ -struct jpeg_color_converter { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, color_convert, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows)); -}; - -/* Downsampling */ -struct jpeg_downsampler { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, downsample, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, - JDIMENSION out_row_group_index)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Forward DCT (also controls coefficient quantization) */ -struct jpeg_forward_dct { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - /* perhaps this should be an array??? */ - JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, - jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks)); -}; - -/* Entropy encoding */ -struct jpeg_entropy_encoder { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); - JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); -}; - -/* Marker writing */ -struct jpeg_marker_writer { - /* write_any_marker is exported for use by applications */ - /* Probably only COM and APPn markers should be written */ - JMETHOD(void, write_any_marker, (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen)); - JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); - JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); -}; - - -/* Declarations for decompression modules */ - -/* Master control module */ -struct jpeg_decomp_master { - JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ -}; - -/* Input control module */ -struct jpeg_input_controller { - JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); - JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean has_multiple_scans; /* True if file has multiple scans */ - boolean eoi_reached; /* True when EOI has been consumed */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_d_main_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_d_coef_controller { - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); - JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, - JSAMPIMAGE output_buf)); - /* Pointer to array of coefficient virtual arrays, or NULL if none */ - jvirt_barray_ptr *coef_arrays; -}; - -/* Decompression postprocessing (color quantization buffer control) */ -struct jpeg_d_post_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Marker reading & parsing */ -struct jpeg_marker_reader { - JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); - /* Read markers until SOS or EOI. - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); - /* Read a restart marker --- exported for use by entropy decoder only */ - jpeg_marker_parser_method read_restart_marker; - /* Application-overridable marker processing methods */ - jpeg_marker_parser_method process_COM; - jpeg_marker_parser_method process_APPn[16]; - - /* State of marker reader --- nominally internal, but applications - * supplying COM or APPn handlers might like to know the state. - */ - boolean saw_SOI; /* found SOI? */ - boolean saw_SOF; /* found SOF? */ - int next_restart_num; /* next restart number expected (0-7) */ - unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ -}; - -/* Entropy decoding */ -struct jpeg_entropy_decoder { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -}; - -/* Inverse DCT (also performs dequantization) */ -typedef JMETHOD(void, inverse_DCT_method_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col)); - -struct jpeg_inverse_dct { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - /* It is useful to allow each component to have a separate IDCT method. */ - inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; -}; - -/* Upsampling (note that upsampler must also call color converter) */ -struct jpeg_upsampler { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, upsample, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Colorspace conversion */ -struct jpeg_color_deconverter { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, color_convert, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows)); -}; - -/* Color quantization or color precision reduction */ -struct jpeg_color_quantizer { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); - JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, - int num_rows)); - JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); -}; - - -/* Miscellaneous useful macros */ - -#undef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#undef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - - -/* We assume that right shift corresponds to signed division by 2 with - * rounding towards minus infinity. This is correct for typical "arithmetic - * shift" instructions that shift in copies of the sign bit. But some - * C compilers implement >> with an unsigned shift. For these machines you - * must define RIGHT_SHIFT_IS_UNSIGNED. - * RIGHT_SHIFT provides a proper signed right shift of an JPEG_INT32 quantity. - * It is only applied with constant shift counts. SHIFT_TEMPS must be - * included in the variables of any routine using RIGHT_SHIFT. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define SHIFT_TEMPS JPEG_INT32 shift_temp; -#define RIGHT_SHIFT(x,shft) \ - ((shift_temp = (x)) < 0 ? \ - (shift_temp >> (shft)) | ((~((JPEG_INT32) 0)) << (32-(shft))) : \ - (shift_temp >> (shft))) -#else -#define SHIFT_TEMPS -#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_compress_master jICompress -#define jinit_c_master_control jICMaster -#define jinit_c_main_controller jICMainC -#define jinit_c_prep_controller jICPrepC -#define jinit_c_coef_controller jICCoefC -#define jinit_color_converter jICColor -#define jinit_downsampler jIDownsampler -#define jinit_forward_dct jIFDCT -#define jinit_huff_encoder jIHEncoder -#define jinit_phuff_encoder jIPHEncoder -#define jinit_marker_writer jIMWriter -#define jinit_master_decompress jIDMaster -#define jinit_d_main_controller jIDMainC -#define jinit_d_coef_controller jIDCoefC -#define jinit_d_post_controller jIDPostC -#define jinit_input_controller jIInCtlr -#define jinit_marker_reader jIMReader -#define jinit_huff_decoder jIHDecoder -#define jinit_phuff_decoder jIPHDecoder -#define jinit_inverse_dct jIIDCT -#define jinit_upsampler jIUpsampler -#define jinit_color_deconverter jIDColor -#define jinit_1pass_quantizer jI1Quant -#define jinit_2pass_quantizer jI2Quant -#define jinit_merged_upsampler jIMUpsampler -#define jinit_memory_mgr jIMemMgr -#define jdiv_round_up jDivRound -#define jround_up jRound -#define jcopy_sample_rows jCopySamples -#define jcopy_block_row jCopyBlocks -#define jzero_far jZeroFar -#define jpeg_zigzag_order jZIGTable -#define jpeg_natural_order jZAGTable -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Compression module initialization routines */ -EXTERN void jinit_compress_master JPP((j_compress_ptr cinfo)); -EXTERN void jinit_c_master_control JPP((j_compress_ptr cinfo, - boolean transcode_only)); -EXTERN void jinit_c_main_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_c_prep_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_c_coef_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_color_converter JPP((j_compress_ptr cinfo)); -EXTERN void jinit_downsampler JPP((j_compress_ptr cinfo)); -EXTERN void jinit_forward_dct JPP((j_compress_ptr cinfo)); -EXTERN void jinit_huff_encoder JPP((j_compress_ptr cinfo)); -EXTERN void jinit_phuff_encoder JPP((j_compress_ptr cinfo)); -EXTERN void jinit_marker_writer JPP((j_compress_ptr cinfo)); -/* Decompression module initialization routines */ -EXTERN void jinit_master_decompress JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_d_main_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_d_coef_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_d_post_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN void jinit_input_controller JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_marker_reader JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_huff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_inverse_dct JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_upsampler JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_color_deconverter JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN void jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); -/* Memory manager initialization */ -EXTERN void jinit_memory_mgr JPP((j_common_ptr cinfo)); - -/* Utility routines in jutils.c */ -EXTERN long jdiv_round_up JPP((long a, long b)); -EXTERN long jround_up JPP((long a, long b)); -EXTERN void jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols)); -EXTERN void jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks)); -EXTERN void jzero_far JPP((void FAR * target, size_t bytestozero)); -/* Constant tables in jutils.c */ -extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ -extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ - -/* Suppress undefined-structure complaints if necessary. */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -#endif -#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/third_party/jpeg-6/jpeglib.h b/third_party/jpeg-6/jpeglib.h deleted file mode 100644 index edfdda1..0000000 --- a/third_party/jpeg-6/jpeglib.h +++ /dev/null @@ -1,1051 +0,0 @@ -/* - * jpeglib.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the application interface for the JPEG library. - * Most applications using the library need only include this file, - * and perhaps jerror.h if they want to know the exact error codes. - */ - -#ifndef JPEGLIB_H -#define JPEGLIB_H - -typedef unsigned char boolean; -/* - * First we include the configuration files that record how this - * installation of the JPEG library is set up. jconfig.h can be - * generated automatically for many systems. jmorecfg.h contains - * manual configuration options that most people need not worry about. - */ - -#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ -#include "../jpeg-6/jconfig.h" /* widely used configuration options */ -#endif -#include "../jpeg-6/jmorecfg.h" /* seldom changed options */ - - -/* Version ID for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". - */ - -#define JPEG_LIB_VERSION 60 /* Version 6 */ - - -/* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. - */ - -#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ -#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ -#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ -#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ -#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ -#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ -#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ -/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; - * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. - * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU - * to handle it. We even let you do this from the jconfig.h file. However, - * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe - * sometimes emits noncompliant files doesn't mean you should too. - */ -#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ -#ifndef D_MAX_BLOCKS_IN_MCU -#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ -#endif - - -/* This macro is used to declare a "method", that is, a function pointer. - * We want to supply prototype parameters if the compiler can cope. - * Note that the arglist parameter must be parenthesized! - */ - -#ifdef HAVE_PROTOTYPES -#define JMETHOD(type,methodname,arglist) type (*methodname) arglist -#else -#define JMETHOD(type,methodname,arglist) type (*methodname) () -#endif - - -/* Data structures for images (arrays of samples and of DCT coefficients). - * On 80x86 machines, the image arrays are too big for near pointers, - * but the pointer arrays can fit in near memory. - */ - -typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ -typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ -typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ - -typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ -typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ -typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ -typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ - -typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ - - -/* Types for JPEG compression parameters and working tables. */ - - -/* DCT coefficient quantization tables. */ - -typedef struct { - /* This field directly represents the contents of a JPEG DQT marker. - * Note: the values are always given in zigzag order. - */ - UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JQUANT_TBL; - - -/* Huffman coding tables. */ - -typedef struct { - /* These two fields directly represent the contents of a JPEG DHT marker */ - UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ - /* length k bits; bits[0] is unused */ - UINT8 huffval[256]; /* The symbols, in order of incr code length */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JHUFF_TBL; - - -/* Basic info about one component (color channel). */ - -typedef struct { - /* These values are fixed over the whole image. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOF marker. */ - int component_id; /* identifier for this component (0..255) */ - int component_index; /* its index in SOF or cinfo->comp_info[] */ - int h_samp_factor; /* horizontal sampling factor (1..4) */ - int v_samp_factor; /* vertical sampling factor (1..4) */ - int quant_tbl_no; /* quantization table selector (0..3) */ - /* These values may vary between scans. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOS marker. */ - /* The decompressor output side may not use these variables. */ - int dc_tbl_no; /* DC entropy table selector (0..3) */ - int ac_tbl_no; /* AC entropy table selector (0..3) */ - - /* Remaining fields should be treated as private by applications. */ - - /* These values are computed during compression or decompression startup: */ - /* Component's size in DCT blocks. - * Any dummy blocks added to complete an MCU are not counted; therefore - * these values do not depend on whether a scan is interleaved or not. - */ - JDIMENSION width_in_blocks; - JDIMENSION height_in_blocks; - /* Size of a DCT block in samples. Always DCTSIZE for compression. - * For decompression this is the size of the output from one DCT block, - * reflecting any scaling we choose to apply during the IDCT step. - * Values of 1,2,4,8 are likely to be supported. Note that different - * components may receive different IDCT scalings. - */ - int DCT_scaled_size; - /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface), thus - * downsampled_width = ceil(image_width * Hi/Hmax) - * and similarly for height. For decompression, IDCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) - */ - JDIMENSION downsampled_width; /* actual width in samples */ - JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. - */ - boolean component_needed; /* do we need the value of this component? */ - - /* These values are computed before starting a scan of the component. */ - /* The decompressor output side may not use these variables. */ - int MCU_width; /* number of blocks per MCU, horizontally */ - int MCU_height; /* number of blocks per MCU, vertically */ - int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ - int last_col_width; /* # of non-dummy blocks across in last MCU */ - int last_row_height; /* # of non-dummy blocks down in last MCU */ - - /* Saved quantization table for component; NULL if none yet saved. - * See jdinput.c comments about the need for this information. - * This field is not currently used by the compressor. - */ - JQUANT_TBL * quant_table; - - /* Private per-component storage for DCT or IDCT subsystem. */ - void * dct_table; -} jpeg_component_info; - - -/* The script for encoding a multiple-scan file is an array of these: */ - -typedef struct { - int comps_in_scan; /* number of components encoded in this scan */ - int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ - int Ss, Se; /* progressive JPEG spectral selection parms */ - int Ah, Al; /* progressive JPEG successive approx. parms */ -} jpeg_scan_info; - - -/* Known color spaces. */ - -typedef enum { - JCS_UNKNOWN, /* error/unspecified */ - JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ - JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK /* Y/Cb/Cr/K */ -} J_COLOR_SPACE; - -/* DCT/IDCT algorithm options. */ - -typedef enum { - JDCT_ISLOW, /* slow but accurate integer algorithm */ - JDCT_IFAST, /* faster, less accurate integer method */ - JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ -} J_DCT_METHOD; - -#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ -#define JDCT_DEFAULT JDCT_ISLOW -#endif -#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ -#define JDCT_FASTEST JDCT_IFAST -#endif - -/* Dithering options for decompression. */ - -typedef enum { - JDITHER_NONE, /* no dithering */ - JDITHER_ORDERED, /* simple ordered dither */ - JDITHER_FS /* Floyd-Steinberg error diffusion dither */ -} J_DITHER_MODE; - - -/* Common fields between JPEG compression and decompression master structs. */ - -#define jpeg_common_fields \ - struct jpeg_error_mgr * err; /* Error handler module */\ - struct jpeg_memory_mgr * mem; /* Memory manager module */\ - struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ - boolean is_decompressor; /* so common code can tell which is which */\ - int global_state /* for checking call sequence validity */ - -/* Routines that are to be used by both halves of the library are declared - * to receive a pointer to this structure. There are no actual instances of - * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. - */ -struct jpeg_common_struct { - jpeg_common_fields; /* Fields common to both master struct types */ - /* Additional fields follow in an actual jpeg_compress_struct or - * jpeg_decompress_struct. All three structs must agree on these - * initial fields! (This would be a lot cleaner in C++.) - */ -}; - -typedef struct jpeg_common_struct * j_common_ptr; -typedef struct jpeg_compress_struct * j_compress_ptr; -typedef struct jpeg_decompress_struct * j_decompress_ptr; - - -/* Master record for a compression instance */ - -struct jpeg_compress_struct { - jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ - - /* Destination for compressed data */ - struct jpeg_destination_mgr * dest; - - /* Description of source image --- these fields must be filled in by - * outer application before starting compression. in_color_space must - * be correct before you can even call jpeg_set_defaults(). - */ - - JDIMENSION image_width; /* input image width */ - JDIMENSION image_height; /* input image height */ - int input_components; /* # of color components in input image */ - J_COLOR_SPACE in_color_space; /* colorspace of input image */ - - double input_gamma; /* image gamma of input image */ - - /* Compression parameters --- these fields must be set before calling - * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to - * initialize everything to reasonable defaults, then changing anything - * the application specifically wants to change. That way you won't get - * burnt when new parameters are added. Also note that there are several - * helper routines to simplify changing parameters. - */ - - int data_precision; /* bits of precision in image data */ - - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - int num_scans; /* # of entries in scan_info array */ - const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ - /* The default value of scan_info is NULL, which causes a single-scan - * sequential JPEG file to be emitted. To create a multi-scan file, - * set num_scans and scan_info to point to an array of scan definitions. - */ - - boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - int smoothing_factor; /* 1..100, or 0 for no input smoothing */ - J_DCT_METHOD dct_method; /* DCT algorithm selector */ - - /* The restart interval can be specified in absolute MCUs by setting - * restart_interval, or in MCU rows by setting restart_in_rows - * (in which case the correct restart_interval will be figured - * for each scan). - */ - unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ - int restart_in_rows; /* if > 0, MCU rows per restart interval */ - - /* Parameters controlling emission of special markers. */ - - boolean write_JFIF_header; /* should a JFIF marker be written? */ - /* These three values are not used by the JPEG code, merely copied */ - /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ - /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ - /* ratio is defined by X_density/Y_density even when density_unit=0. */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean write_Adobe_marker; /* should an Adobe marker be written? */ - - /* State variable: index of next scanline to be written to - * jpeg_write_scanlines(). Application may use this to control its - * processing loop, e.g., "while (next_scanline < image_height)". - */ - - JDIMENSION next_scanline; /* 0 .. image_height-1 */ - - /* Remaining fields are known throughout compressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during compression startup - */ - boolean progressive_mode; /* TRUE if scan script uses progressive mode */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ - /* The coefficient controller receives data in units of MCU rows as defined - * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. - */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[C_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* - * Links to compression subobjects (methods and private variables of modules) - */ - struct jpeg_comp_master * master; - struct jpeg_c_main_controller * main; - struct jpeg_c_prep_controller * prep; - struct jpeg_c_coef_controller * coef; - struct jpeg_marker_writer * marker; - struct jpeg_color_converter * cconvert; - struct jpeg_downsampler * downsample; - struct jpeg_forward_dct * fdct; - struct jpeg_entropy_encoder * entropy; -}; - - -/* Master record for a decompression instance */ - -struct jpeg_decompress_struct { - jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ - - /* Source of compressed data */ - struct jpeg_source_mgr * src; - - /* Basic description of image --- filled in by jpeg_read_header(). */ - /* Application may inspect these values to decide how to process image. */ - - JDIMENSION image_width; /* nominal image width (from SOF marker) */ - JDIMENSION image_height; /* nominal image height */ - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - /* Decompression processing parameters --- these fields must be set before - * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes - * them to default values. - */ - - J_COLOR_SPACE out_color_space; /* colorspace for output */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - double output_gamma; /* image gamma wanted in output */ - - boolean buffered_image; /* TRUE=multiple output passes */ - boolean raw_data_out; /* TRUE=downsampled data wanted */ - - J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - - boolean quantize_colors; /* TRUE=colormapped output wanted */ - /* the following are ignored if not quantize_colors: */ - J_DITHER_MODE dither_mode; /* type of color dithering to use */ - boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ - int desired_number_of_colors; /* max # colors to use in created colormap */ - /* these are significant only in buffered-image mode: */ - boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - boolean enable_external_quant;/* enable future use of external colormap */ - boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ - - /* Description of actual output image that will be returned to application. - * These fields are computed by jpeg_start_decompress(). - * You can also use jpeg_calc_output_dimensions() to determine these values - * in advance of calling jpeg_start_decompress(). - */ - - JDIMENSION output_width; /* scaled image width */ - JDIMENSION output_height; /* scaled image height */ - int out_color_components; /* # of color components in out_color_space */ - int output_components; /* # of color components returned */ - /* output_components is 1 (a colormap index) when quantizing colors; - * otherwise it equals out_color_components. - */ - int rec_outbuf_height; /* min recommended height of scanline buffer */ - /* If the buffer passed to jpeg_read_scanlines() is less than this many rows - * high, space and time will be wasted due to unnecessary data copying. - * Usually rec_outbuf_height will be 1 or 2, at most 4. - */ - - /* When quantizing colors, the output colormap is described by these fields. - * The application can supply a colormap by setting colormap non-NULL before - * calling jpeg_start_decompress; otherwise a colormap is created during - * jpeg_start_decompress or jpeg_start_output. - * The map has out_color_components rows and actual_number_of_colors columns. - */ - int actual_number_of_colors; /* number of entries in use */ - JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ - - /* State variables: these variables indicate the progress of decompression. - * The application may examine these but must not modify them. - */ - - /* Row index of next scanline to be read from jpeg_read_scanlines(). - * Application may use this to control its processing loop, e.g., - * "while (output_scanline < output_height)". - */ - JDIMENSION output_scanline; /* 0 .. output_height-1 */ - - /* Current input scan number and number of iMCU rows completed in scan. - * These indicate the progress of the decompressor input side. - */ - int input_scan_number; /* Number of SOS markers seen so far */ - JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ - - /* The "output scan number" is the notional scan being displayed by the - * output side. The decompressor will not allow output scan/row number - * to get ahead of input scan/row, but it can fall arbitrarily far behind. - */ - int output_scan_number; /* Nominal scan number being displayed */ - JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ - - /* Current progression status. coef_bits[c][i] indicates the precision - * with which component c's DCT coefficient i (in zigzag order) is known. - * It is -1 when no data has yet been received, otherwise it is the point - * transform (shift) value for the most recent scan of the coefficient - * (thus, 0 at completion of the progression). - * This pointer is NULL when reading a non-progressive file. - */ - int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ - - /* Internal JPEG parameters --- the application usually need not look at - * these fields. Note that the decompressor output side may not use - * any parameters that can change between scans. - */ - - /* Quantization and Huffman tables are carried forward across input - * datastreams when processing abbreviated JPEG datastreams. - */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - /* These parameters are never carried across datastreams, since they - * are given in SOF/SOS markers or defined to be reset by SOI. - */ - - int data_precision; /* bits of precision in image data */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ - - /* These fields record data obtained from optional markers recognized by - * the JPEG library. - */ - boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ - /* Data copied from JFIF marker: */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ - UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - - /* Remaining fields are known throughout decompressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during decompression startup - */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ - /* The coefficient controller's input and output progress is measured in - * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows - * in fully interleaved JPEG scans, but are used whether the scan is - * interleaved or not. We define an iMCU row as v_samp_factor DCT block - * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. - */ - - JSAMPLE * sample_range_limit; /* table for fast range-limiting */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - * Note that the decompressor output side must not use these fields. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[D_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* This field is shared between entropy decoder and marker parser. - * It is either zero or the code of a JPEG marker that has been - * read from the data source, but has not yet been processed. - */ - int unread_marker; - - /* - * Links to decompression subobjects (methods, private variables of modules) - */ - struct jpeg_decomp_master * master; - struct jpeg_d_main_controller * main; - struct jpeg_d_coef_controller * coef; - struct jpeg_d_post_controller * post; - struct jpeg_input_controller * inputctl; - struct jpeg_marker_reader * marker; - struct jpeg_entropy_decoder * entropy; - struct jpeg_inverse_dct * idct; - struct jpeg_upsampler * upsample; - struct jpeg_color_deconverter * cconvert; - struct jpeg_color_quantizer * cquantize; -}; - - -/* "Object" declarations for JPEG modules that may be supplied or called - * directly by the surrounding application. - * As with all objects in the JPEG library, these structs only define the - * publicly visible methods and state variables of a module. Additional - * private fields may exist after the public ones. - */ - - -/* Error handler object */ - -struct jpeg_error_mgr { - /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); - /* Conditionally emit a trace or warning message */ - JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); - /* Routine that actually outputs a trace or error message */ - JMETHOD(void, output_message, (j_common_ptr cinfo)); - /* Format a message string for the most recent JPEG error or message */ - JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); -#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ - /* Reset error state variables at start of a new image */ - JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); - - /* The message ID code and any parameters are saved here. - * A message can have one string parameter or up to 8 int parameters. - */ - int msg_code; -#define JMSG_STR_PARM_MAX 80 - union { - int i[8]; - char s[JMSG_STR_PARM_MAX]; - } msg_parm; - - /* Standard state variables for error facility */ - - int trace_level; /* max msg_level that will be displayed */ - - /* For recoverable corrupt-data errors, we emit a warning message, - * but keep going unless emit_message chooses to abort. emit_message - * should count warnings in num_warnings. The surrounding application - * can check for bad data by seeing if num_warnings is nonzero at the - * end of processing. - */ - long num_warnings; /* number of corrupt-data warnings */ - - /* These fields point to the table(s) of error message strings. - * An application can change the table pointer to switch to a different - * message list (typically, to change the language in which errors are - * reported). Some applications may wish to add additional error codes - * that will be handled by the JPEG library error mechanism; the second - * table pointer is used for this purpose. - * - * First table includes all errors generated by JPEG library itself. - * Error code 0 is reserved for a "no such error string" message. - */ - const char * const * jpeg_message_table; /* Library errors */ - int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ - /* Second table can be added by application (see cjpeg/djpeg for example). - * It contains strings numbered first_addon_message..last_addon_message. - */ - const char * const * addon_message_table; /* Non-library errors */ - int first_addon_message; /* code for first string in addon table */ - int last_addon_message; /* code for last string in addon table */ -}; - - -/* Progress monitor object */ - -struct jpeg_progress_mgr { - JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); - - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -}; - - -/* Data destination object for compression */ - -struct jpeg_destination_mgr { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - - JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); - JMETHOD(void, term_destination, (j_compress_ptr cinfo)); -}; - - -/* Data source object for decompression */ - -struct jpeg_source_mgr { - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - - JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); - JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); - JMETHOD(void, term_source, (j_decompress_ptr cinfo)); -}; - - -/* Memory manager object. - * Allocates "small" objects (a few K total), "large" objects (tens of K), - * and "really big" objects (virtual arrays with backing store if needed). - * The memory manager does not allow individual objects to be freed; rather, - * each created object is assigned to a pool, and whole pools can be freed - * at once. This is faster and more convenient than remembering exactly what - * to free, especially where malloc()/free() are not too speedy. - * NB: alloc routines never return NULL. They exit to error_exit if not - * successful. - */ - -#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ -#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ -#define JPOOL_NUMPOOLS 2 - -typedef struct jvirt_sarray_control * jvirt_sarray_ptr; -typedef struct jvirt_barray_control * jvirt_barray_ptr; - - -struct jpeg_memory_mgr { - /* Method pointers */ - JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, - JDIMENSION numrows)); - JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, - JDIMENSION numrows)); - JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION samplesperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION blocksperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); - JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, - jvirt_sarray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, - jvirt_barray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); - JMETHOD(void, self_destruct, (j_common_ptr cinfo)); - - /* Limit on memory allocation for this JPEG object. (Note that this is - * merely advisory, not a guaranteed maximum; it only affects the space - * used for virtual-array buffers.) May be changed by outer application - * after creating the JPEG object. - */ - long max_memory_to_use; -}; - - -/* Routine signature for application-supplied marker processing methods. - * Need not pass marker code since it is stored in cinfo->unread_marker. - */ -typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); - - -/* Declarations for routines called by application. - * The JPP macro hides prototype parameters from compilers that can't cope. - * Note JPP requires double parentheses. - */ - -#ifdef HAVE_PROTOTYPES -#define JPP(arglist) arglist -#else -#define JPP(arglist) () -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. - * We shorten external names to be unique in the first six letters, which - * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 - * characters, you are out of luck. Get a better compiler.) - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_error jStdError -#define jpeg_create_compress jCreaCompress -#define jpeg_create_decompress jCreaDecompress -#define jpeg_destroy_compress jDestCompress -#define jpeg_destroy_decompress jDestDecompress -#define jpeg_stdio_dest jStdDest -#define jpeg_stdio_src jStdSrc -#define jpeg_set_defaults jSetDefaults -#define jpeg_set_colorspace jSetColorspace -#define jpeg_default_colorspace jDefColorspace -#define jpeg_set_quality jSetQuality -#define jpeg_set_linear_quality jSetLQuality -#define jpeg_add_quant_table jAddQuantTable -#define jpeg_quality_scaling jQualityScaling -#define jpeg_simple_progression jSimProgress -#define jpeg_suppress_tables jSuppressTables -#define jpeg_alloc_quant_table jAlcQTable -#define jpeg_alloc_huff_table jAlcHTable -#define jpeg_start_compress jStrtCompress -#define jpeg_write_scanlines jWrtScanlines -#define jpeg_finish_compress jFinCompress -#define jpeg_write_raw_data jWrtRawData -#define jpeg_write_marker jWrtMarker -#define jpeg_write_tables jWrtTables -#define jpeg_read_header jReadHeader -#define jpeg_start_decompress jStrtDecompress -#define jpeg_read_scanlines jReadScanlines -#define jpeg_finish_decompress jFinDecompress -#define jpeg_read_raw_data jReadRawData -#define jpeg_has_multiple_scans jHasMultScn -#define jpeg_start_output jStrtOutput -#define jpeg_finish_output jFinOutput -#define jpeg_input_complete jInComplete -#define jpeg_new_colormap jNewCMap -#define jpeg_consume_input jConsumeInput -#define jpeg_calc_output_dimensions jCalcDimensions -#define jpeg_set_marker_processor jSetMarker -#define jpeg_read_coefficients jReadCoefs -#define jpeg_write_coefficients jWrtCoefs -#define jpeg_copy_critical_parameters jCopyCrit -#define jpeg_abort_compress jAbrtCompress -#define jpeg_abort_decompress jAbrtDecompress -#define jpeg_abort jAbort -#define jpeg_destroy jDestroy -#define jpeg_resync_to_restart jResyncRestart -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Default error-management setup */ -EXTERN struct jpeg_error_mgr *jpeg_std_error JPP((struct jpeg_error_mgr *err)); - -/* Initialization and destruction of JPEG compression objects */ -/* NB: you must set up the error-manager BEFORE calling jpeg_create_xxx */ -EXTERN void jpeg_create_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_create_decompress JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_destroy_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); - -/* Standard data source and destination managers: stdio streams. */ -/* Caller is responsible for opening the file before and closing after. */ -EXTERN void jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); -EXTERN void jpeg_stdio_src JPP((j_decompress_ptr cinfo, unsigned char *infile)); - -/* Default parameter setup for compression */ -EXTERN void jpeg_set_defaults JPP((j_compress_ptr cinfo)); -/* Compression parameter setup aids */ -EXTERN void jpeg_set_colorspace JPP((j_compress_ptr cinfo, - J_COLOR_SPACE colorspace)); -EXTERN void jpeg_default_colorspace JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - boolean force_baseline)); -EXTERN void jpeg_set_linear_quality JPP((j_compress_ptr cinfo, - int scale_factor, - boolean force_baseline)); -EXTERN void jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, - boolean force_baseline)); -EXTERN int jpeg_quality_scaling JPP((int quality)); -EXTERN void jpeg_simple_progression JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_suppress_tables JPP((j_compress_ptr cinfo, - boolean suppress)); -EXTERN JQUANT_TBL * jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); -EXTERN JHUFF_TBL * jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); - -/* Main entry points for compression */ -EXTERN void jpeg_start_compress JPP((j_compress_ptr cinfo, - boolean write_all_tables)); -EXTERN JDIMENSION jpeg_write_scanlines JPP((j_compress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION num_lines)); -EXTERN void jpeg_finish_compress JPP((j_compress_ptr cinfo)); - -/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ -EXTERN JDIMENSION jpeg_write_raw_data JPP((j_compress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION num_lines)); - -/* Write a special marker. See libjpeg.doc concerning safe usage. */ -EXTERN void jpeg_write_marker JPP((j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen)); - -/* Alternate compression function: just write an abbreviated table file */ -EXTERN void jpeg_write_tables JPP((j_compress_ptr cinfo)); - -/* Decompression startup: read start of JPEG datastream to see what's there */ -EXTERN int jpeg_read_header JPP((j_decompress_ptr cinfo, - boolean require_image)); -/* Return value is one of: */ -#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ -#define JPEG_HEADER_OK 1 /* Found valid image datastream */ -#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ -/* If you pass require_image = TRUE (normal case), you need not check for - * a TABLES_ONLY return code; an abbreviated file will cause an error exit. - * JPEG_SUSPENDED is only possible if you use a data source module that can - * give a suspension return (the stdio source module doesn't). - */ - -/* Main entry points for decompression */ -EXTERN boolean jpeg_start_decompress JPP((j_decompress_ptr cinfo)); -EXTERN JDIMENSION jpeg_read_scanlines JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION max_lines)); -EXTERN boolean jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); - -/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ -EXTERN JDIMENSION jpeg_read_raw_data JPP((j_decompress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION max_lines)); - -/* Additional entry points for buffered-image mode. */ -EXTERN boolean jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN boolean jpeg_start_output JPP((j_decompress_ptr cinfo, - int scan_number)); -EXTERN boolean jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN boolean jpeg_input_complete JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_new_colormap JPP((j_decompress_ptr cinfo)); -EXTERN int jpeg_consume_input JPP((j_decompress_ptr cinfo)); -/* Return value is one of: */ -/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ -#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ -#define JPEG_REACHED_EOI 2 /* Reached end of image */ -#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ -#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ - -/* Precalculate output dimensions for current decompression parameters. */ -EXTERN void jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); - -/* Install a special processing method for COM or APPn markers. */ -EXTERN void jpeg_set_marker_processor JPP((j_decompress_ptr cinfo, - int marker_code, - jpeg_marker_parser_method routine)); - -/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ -EXTERN jvirt_barray_ptr * jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); -EXTERN void jpeg_write_coefficients JPP((j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays)); -EXTERN void jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, - j_compress_ptr dstinfo)); - -/* If you choose to abort compression or decompression before completing - * jpeg_finish_(de)compress, then you need to clean up to release memory, - * temporary files, etc. You can just call jpeg_destroy_(de)compress - * if you're done with the JPEG object, but if you want to clean it up and - * reuse it, call this: - */ -EXTERN void jpeg_abort_compress JPP((j_compress_ptr cinfo)); -EXTERN void jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); - -/* Generic versions of jpeg_abort and jpeg_destroy that work on either - * flavor of JPEG object. These may be more convenient in some places. - */ -EXTERN void jpeg_abort JPP((j_common_ptr cinfo)); -EXTERN void jpeg_destroy JPP((j_common_ptr cinfo)); - -/* Default restart-marker-resync procedure for use by data source modules */ -EXTERN boolean jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, - int desired)); - - -/* These marker codes are exported since applications and data source modules - * are likely to want to use them. - */ - -#define JPEG_RST0 0xD0 /* RST0 marker code */ -#define JPEG_EOI 0xD9 /* EOI marker code */ -#define JPEG_APP0 0xE0 /* APP0 marker code */ -#define JPEG_COM 0xFE /* COM marker code */ - - -/* If we have a brain-damaged compiler that emits warnings (or worse, errors) - * for structure definitions that are never filled in, keep it quiet by - * supplying dummy definitions for the various substructures. - */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -struct jpeg_comp_master { long dummy; }; -struct jpeg_c_main_controller { long dummy; }; -struct jpeg_c_prep_controller { long dummy; }; -struct jpeg_c_coef_controller { long dummy; }; -struct jpeg_marker_writer { long dummy; }; -struct jpeg_color_converter { long dummy; }; -struct jpeg_downsampler { long dummy; }; -struct jpeg_forward_dct { long dummy; }; -struct jpeg_entropy_encoder { long dummy; }; -struct jpeg_decomp_master { long dummy; }; -struct jpeg_d_main_controller { long dummy; }; -struct jpeg_d_coef_controller { long dummy; }; -struct jpeg_d_post_controller { long dummy; }; -struct jpeg_input_controller { long dummy; }; -struct jpeg_marker_reader { long dummy; }; -struct jpeg_entropy_decoder { long dummy; }; -struct jpeg_inverse_dct { long dummy; }; -struct jpeg_upsampler { long dummy; }; -struct jpeg_color_deconverter { long dummy; }; -struct jpeg_color_quantizer { long dummy; }; -#endif /* JPEG_INTERNALS */ -#endif /* INCOMPLETE_TYPES_BROKEN */ - - -/* - * The JPEG library modules define JPEG_INTERNALS before including this file. - * The internal structure declarations are read only when that is true. - * Applications using the library should not include jpegint.h, but may wish - * to include jerror.h. - */ - -#ifdef JPEG_INTERNALS -#include "../jpeg-6/jpegint.h" /* fetch private declarations */ -#include "../jpeg-6/jerror.h" /* fetch error codes too */ -#endif - -#endif /* JPEGLIB_H */ diff --git a/third_party/jpeg-6/jpegtran.c b/third_party/jpeg-6/jpegtran.c deleted file mode 100644 index f602c6b..0000000 --- a/third_party/jpeg-6/jpegtran.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * jpegtran.c - * - * Copyright (C) 1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for JPEG transcoding. - * It is very similar to cjpeg.c, but provides lossless transcoding between - * different JPEG file formats. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "jversion.h" /* for version message */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks declares it here */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ - - -LOCAL void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); -#ifdef ENTROPY_OPT_SUPPORTED - fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); -#endif -#ifdef C_PROGRESSIVE_SUPPORTED - fprintf(stderr, " -progressive Create progressive JPEG file\n"); -#endif - fprintf(stderr, "Switches for advanced users:\n"); - fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - fprintf(stderr, "Switches for wizards:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif -#ifdef C_MULTISCAN_FILES_SUPPORTED - fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); -#endif - exit(EXIT_FAILURE); -} - - -LOCAL int -parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - boolean simple_progressive; - char * scansarg = NULL; /* saves -scans parm if any */ - - /* Set up default JPEG parameters. */ - simple_progressive = FALSE; - outfilename = NULL; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "arithmetic", 1)) { - /* Use arithmetic coding. */ -#ifdef C_ARITH_CODING_SUPPORTED - cinfo->arith_code = TRUE; -#else - fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { - /* Enable entropy parm optimization. */ -#ifdef ENTROPY_OPT_SUPPORTED - cinfo->optimize_coding = TRUE; -#else - fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "progressive", 1)) { - /* Select simple progressive mode. */ -#ifdef C_PROGRESSIVE_SUPPORTED - simple_progressive = TRUE; - /* We must postpone execution until num_components is known. */ -#else - fprintf(stderr, "%s: sorry, progressive output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "restart", 1)) { - /* Restart interval in MCU rows (or in MCUs with 'b'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (lval < 0 || lval > 65535L) - usage(); - if (ch == 'b' || ch == 'B') { - cinfo->restart_interval = (unsigned int) lval; - cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ - } else { - cinfo->restart_in_rows = (int) lval; - /* restart_interval will be computed during startup */ - } - - } else if (keymatch(arg, "scans", 2)) { - /* Set scan script. */ -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - scansarg = argv[argn]; - /* We must postpone reading the file in case -progressive appears. */ -#else - fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else { - usage(); /* bogus switch */ - } - } - - /* Post-switch-scanning cleanup */ - - if (for_real) { - -#ifdef C_PROGRESSIVE_SUPPORTED - if (simple_progressive) /* process -progressive; -scans can override */ - jpeg_simple_progression(cinfo); -#endif - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (scansarg != NULL) /* process -scans if it was present */ - if (! read_scan_script(cinfo, scansarg)) - usage(); -#endif - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * The main program. - */ - -GLOBAL int -main (int argc, char **argv) -{ - struct jpeg_decompress_struct srcinfo; - struct jpeg_compress_struct dstinfo; - struct jpeg_error_mgr jsrcerr, jdsterr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - jvirt_barray_ptr * coef_arrays; - int file_index; - FILE * input_file; - FILE * output_file; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "jpegtran"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG decompression object with default error handling. */ - srcinfo.err = jpeg_std_error(&jsrcerr); - jpeg_create_decompress(&srcinfo); - /* Initialize the JPEG compression object with default error handling. */ - dstinfo.err = jpeg_std_error(&jdsterr); - jpeg_create_compress(&dstinfo); - - /* Now safe to enable signal catcher. - * Note: we assume only the decompression object will have virtual arrays. - */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &srcinfo); -#endif - - /* Scan command line to find file names. - * It is convenient to use just one switch-parsing routine, but the switch - * values read here are ignored; we will rescan the switches after opening - * the input file. - */ - - file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); - jsrcerr.trace_level = jdsterr.trace_level; - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &dstinfo, &progress); -#endif - - /* Specify data source for decompression */ - jpeg_stdio_src(&srcinfo, input_file); - - /* Read file header */ - (void) jpeg_read_header(&srcinfo, TRUE); - - /* Read source file as DCT coefficients */ - coef_arrays = jpeg_read_coefficients(&srcinfo); - - /* Initialize destination compression parameters from source values */ - jpeg_copy_critical_parameters(&srcinfo, &dstinfo); - - /* Adjust default compression parameters by re-parsing the options */ - file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); - - /* Specify data destination for compression */ - jpeg_stdio_dest(&dstinfo, output_file); - - /* Start compressor */ - jpeg_write_coefficients(&dstinfo, coef_arrays); - - /* ought to copy source comments here... */ - - /* Finish compression and release memory */ - jpeg_finish_compress(&dstinfo); - jpeg_destroy_compress(&dstinfo); - (void) jpeg_finish_decompress(&srcinfo); - jpeg_destroy_decompress(&srcinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &dstinfo); -#endif - - /* All done. */ - exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/third_party/jpeg-6/jquant1.c b/third_party/jpeg-6/jquant1.c deleted file mode 100644 index 035e79a..0000000 --- a/third_party/jpeg-6/jquant1.c +++ /dev/null @@ -1,856 +0,0 @@ -/* - * jquant1.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 1-pass color quantization (color mapping) routines. - * These routines provide mapping to a fixed color map using equally spaced - * color values. Optional Floyd-Steinberg or ordered dithering is available. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_1PASS_SUPPORTED - - -/* - * The main purpose of 1-pass quantization is to provide a fast, if not very - * high quality, colormapped output capability. A 2-pass quantizer usually - * gives better visual quality; however, for quantized grayscale output this - * quantizer is perfectly adequate. Dithering is highly recommended with this - * quantizer, though you can turn it off if you really want to. - * - * In 1-pass quantization the colormap must be chosen in advance of seeing the - * image. We use a map consisting of all combinations of Ncolors[i] color - * values for the i'th component. The Ncolors[] values are chosen so that - * their product, the total number of colors, is no more than that requested. - * (In most cases, the product will be somewhat less.) - * - * Since the colormap is orthogonal, the representative value for each color - * component can be determined without considering the other components; - * then these indexes can be combined into a colormap index by a standard - * N-dimensional-array-subscript calculation. Most of the arithmetic involved - * can be precalculated and stored in the lookup table colorindex[]. - * colorindex[i][j] maps pixel value j in component i to the nearest - * representative value (grid plane) for that component; this index is - * multiplied by the array stride for component i, so that the - * index of the colormap entry closest to a given pixel value is just - * sum( colorindex[component-number][pixel-component-value] ) - * Aside from being fast, this scheme allows for variable spacing between - * representative values with no additional lookup cost. - * - * If gamma correction has been applied in color conversion, it might be wise - * to adjust the color grid spacing so that the representative colors are - * equidistant in linear space. At this writing, gamma correction is not - * implemented by jdcolor, so nothing is done here. - */ - - -/* Declarations for ordered dithering. - * - * We use a standard 16x16 ordered dither array. The basic concept of ordered - * dithering is described in many references, for instance Dale Schumacher's - * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). - * In place of Schumacher's comparisons against a "threshold" value, we add a - * "dither" value to the input pixel and then round the result to the nearest - * output value. The dither value is equivalent to (0.5 - threshold) times - * the distance between output values. For ordered dithering, we assume that - * the output colors are equally spaced; if not, results will probably be - * worse, since the dither may be too much or too little at a given point. - * - * The normal calculation would be to form pixel value + dither, range-limit - * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. - * We can skip the separate range-limiting step by extending the colorindex - * table in both directions. - */ - -#define ODITHER_SIZE 16 /* dimension of dither matrix */ -/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ -#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ -#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ - -typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; -typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; - -static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { - /* Bayer's order-4 dither array. Generated by the code given in - * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. - * The values in this array must range from 0 to ODITHER_CELLS-1. - */ - { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, - { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, - { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, - { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, - { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, - { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, - { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, - { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, - { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, - { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, - { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, - { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, - { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, - { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, - { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, - { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } -}; - - -/* Declarations for Floyd-Steinberg dithering. - * - * Errors are accumulated into the array fserrors[], at a resolution of - * 1/16th of a pixel count. The error at a given pixel is propagated - * to its not-yet-processed neighbors using the standard F-S fractions, - * ... (here) 7/16 - * 3/16 5/16 1/16 - * We work left-to-right on even rows, right-to-left on odd rows. - * - * We can get away with a single array (holding one row's worth of errors) - * by using it to store the current row's errors at pixel columns not yet - * processed, but the next row's errors at columns already processed. We - * need only a few extra variables to hold the errors immediately around the - * current column. (If we are lucky, those variables are in registers, but - * even if not, they're probably cheaper to access than array elements are.) - * - * The fserrors[] array is indexed [component#][position]. - * We provide (#columns + 2) entries per component; the extra entry at each - * end saves us from special-casing the first and last pixels. - * - * Note: on a wide image, we might not have enough room in a PC's near data - * segment to hold the error array; so it is allocated with alloc_large. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef INT16 FSERROR; /* 16 bits should be enough */ -typedef int LOCFSERROR; /* use 'int' for calculation temps */ -#else -typedef INT32 FSERROR; /* may need more than 16 bits */ -typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ -#endif - -typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ - - -/* Private subobject */ - -#define MAX_Q_COMPS 4 /* max components I can handle */ - -typedef struct { - struct jpeg_color_quantizer pub; /* public fields */ - - /* Initially allocated colormap is saved here */ - JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ - int sv_actual; /* number of entries in use */ - - JSAMPARRAY colorindex; /* Precomputed mapping for speed */ - /* colorindex[i][j] = index of color closest to pixel value j in component i, - * premultiplied as described above. Since colormap indexes must fit into - * JSAMPLEs, the entries of this array will too. - */ - boolean is_padded; /* is the colorindex padded for odither? */ - - int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ - - /* Variables for ordered dithering */ - int row_index; /* cur row's vertical index in dither matrix */ - ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ - - /* Variables for Floyd-Steinberg dithering */ - FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ - boolean on_odd_row; /* flag to remember which row we are on */ -} my_cquantizer; - -typedef my_cquantizer * my_cquantize_ptr; - - -/* - * Policy-making subroutines for create_colormap and create_colorindex. - * These routines determine the colormap to be used. The rest of the module - * only assumes that the colormap is orthogonal. - * - * * select_ncolors decides how to divvy up the available colors - * among the components. - * * output_value defines the set of representative values for a component. - * * largest_input_value defines the mapping from input values to - * representative values for a component. - * Note that the latter two routines may impose different policies for - * different components, though this is not currently done. - */ - - -LOCAL int -select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) -/* Determine allocation of desired colors to components, */ -/* and fill in Ncolors[] array to indicate choice. */ -/* Return value is total number of colors (product of Ncolors[] values). */ -{ - int nc = cinfo->out_color_components; /* number of color components */ - int max_colors = cinfo->desired_number_of_colors; - int total_colors, iroot, i, j; - boolean changed; - long temp; - static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; - - /* We can allocate at least the nc'th root of max_colors per component. */ - /* Compute floor(nc'th root of max_colors). */ - iroot = 1; - do { - iroot++; - temp = iroot; /* set temp = iroot ** nc */ - for (i = 1; i < nc; i++) - temp *= iroot; - } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ - iroot--; /* now iroot = floor(root) */ - - /* Must have at least 2 color values per component */ - if (iroot < 2) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); - - /* Initialize to iroot color values for each component */ - total_colors = 1; - for (i = 0; i < nc; i++) { - Ncolors[i] = iroot; - total_colors *= iroot; - } - /* We may be able to increment the count for one or more components without - * exceeding max_colors, though we know not all can be incremented. - * Sometimes, the first component can be incremented more than once! - * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) - * In RGB colorspace, try to increment G first, then R, then B. - */ - do { - changed = FALSE; - for (i = 0; i < nc; i++) { - j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); - /* calculate new total_colors if Ncolors[j] is incremented */ - temp = total_colors / Ncolors[j]; - temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ - if (temp > (long) max_colors) - break; /* won't fit, done with this pass */ - Ncolors[j]++; /* OK, apply the increment */ - total_colors = (int) temp; - changed = TRUE; - } - } while (changed); - - return total_colors; -} - - -LOCAL int -output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return j'th output value, where j will range from 0 to maxj */ -/* The output values must fall in 0..MAXJSAMPLE in increasing order */ -{ - /* We always provide values 0 and MAXJSAMPLE for each component; - * any additional values are equally spaced between these limits. - * (Forcing the upper and lower values to the limits ensures that - * dithering can't produce a color outside the selected gamut.) - */ - return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); -} - - -LOCAL int -largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return largest input value that should map to j'th output value */ -/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ -{ - /* Breakpoints are halfway between values returned by output_value */ - return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); -} - - -/* - * Create the colormap. - */ - -LOCAL void -create_colormap (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colormap; /* Created colormap */ - int total_colors; /* Number of distinct output colors */ - int i,j,k, nci, blksize, blkdist, ptr, val; - - /* Select number of colors for each component */ - total_colors = select_ncolors(cinfo, cquantize->Ncolors); - - /* Report selected color counts */ - if (cinfo->out_color_components == 3) - TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, - total_colors, cquantize->Ncolors[0], - cquantize->Ncolors[1], cquantize->Ncolors[2]); - else - TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); - - /* Allocate and fill in the colormap. */ - /* The colors are ordered in the map in standard row-major order, */ - /* i.e. rightmost (highest-indexed) color changes most rapidly. */ - - colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - /* blkdist is distance between groups of identical entries for a component */ - blkdist = total_colors; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colormap entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blkdist / nci; - for (j = 0; j < nci; j++) { - /* Compute j'th output value (out of nci) for component */ - val = output_value(cinfo, i, j, nci-1); - /* Fill in all colormap entries that have this value of this component */ - for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { - /* fill in blksize entries beginning at ptr */ - for (k = 0; k < blksize; k++) - colormap[i][ptr+k] = (JSAMPLE) val; - } - } - blkdist = blksize; /* blksize of this color is blkdist of next */ - } - - /* Save the colormap in private storage, - * where it will survive color quantization mode changes. - */ - cquantize->sv_colormap = colormap; - cquantize->sv_actual = total_colors; -} - - -/* - * Create the color index table. - */ - -LOCAL void -create_colorindex (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPROW indexptr; - int i,j,k, nci, blksize, val, pad; - - /* For ordered dither, we pad the color index tables by MAXJSAMPLE in - * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). - * This is not necessary in the other dithering modes. However, we - * flag whether it was done in case user changes dithering mode. - */ - if (cinfo->dither_mode == JDITHER_ORDERED) { - pad = MAXJSAMPLE*2; - cquantize->is_padded = TRUE; - } else { - pad = 0; - cquantize->is_padded = FALSE; - } - - cquantize->colorindex = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (MAXJSAMPLE+1 + pad), - (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - blksize = cquantize->sv_actual; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colorindex entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blksize / nci; - - /* adjust colorindex pointers to provide padding at negative indexes. */ - if (pad) - cquantize->colorindex[i] += MAXJSAMPLE; - - /* in loop, val = index of current output value, */ - /* and k = largest j that maps to current val */ - indexptr = cquantize->colorindex[i]; - val = 0; - k = largest_input_value(cinfo, i, 0, nci-1); - for (j = 0; j <= MAXJSAMPLE; j++) { - while (j > k) /* advance val if past boundary */ - k = largest_input_value(cinfo, i, ++val, nci-1); - /* premultiply so that no multiplication needed in main processing */ - indexptr[j] = (JSAMPLE) (val * blksize); - } - /* Pad at both ends if necessary */ - if (pad) - for (j = 1; j <= MAXJSAMPLE; j++) { - indexptr[-j] = indexptr[0]; - indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; - } - } -} - - -/* - * Create an ordered-dither array for a component having ncolors - * distinct output values. - */ - -LOCAL ODITHER_MATRIX_PTR -make_odither_array (j_decompress_ptr cinfo, int ncolors) -{ - ODITHER_MATRIX_PTR odither; - int j,k; - INT32 num,den; - - odither = (ODITHER_MATRIX_PTR) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ODITHER_MATRIX)); - /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). - * Hence the dither value for the matrix cell with fill order f - * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). - * On 16-bit-int machine, be careful to avoid overflow. - */ - den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); - for (j = 0; j < ODITHER_SIZE; j++) { - for (k = 0; k < ODITHER_SIZE; k++) { - num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) - * MAXJSAMPLE; - /* Ensure round towards zero despite C's lack of consistency - * about rounding negative values in integer division... - */ - odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); - } - } - return odither; -} - - -/* - * Create the ordered-dither tables. - * Components having the same number of representative colors may - * share a dither table. - */ - -LOCAL void -create_odither_tables (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - ODITHER_MATRIX_PTR odither; - int i, j, nci; - - for (i = 0; i < cinfo->out_color_components; i++) { - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - odither = NULL; /* search for matching prior component */ - for (j = 0; j < i; j++) { - if (nci == cquantize->Ncolors[j]) { - odither = cquantize->odither[j]; - break; - } - } - if (odither == NULL) /* need a new table? */ - odither = make_odither_array(cinfo, nci); - cquantize->odither[i] = odither; - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF void -color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colorindex = cquantize->colorindex; - register int pixcode, ci; - register JSAMPROW ptrin, ptrout; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - register int nc = cinfo->out_color_components; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = 0; - for (ci = 0; ci < nc; ci++) { - pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); - } - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF void -color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW ptrin, ptrout; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF void -quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - int * dither; /* points to active row of dither matrix */ - int row_index, col_index; /* current indexes into dither matrix */ - int nc = cinfo->out_color_components; - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - row_index = cquantize->row_index; - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - colorindex_ci = cquantize->colorindex[ci]; - dither = cquantize->odither[ci][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, - * select output value, accumulate into output code for this pixel. - * Range-limiting need not be done explicitly, as we have extended - * the colorindex table to produce the right answers for out-of-range - * inputs. The maximum dither is +- MAXJSAMPLE; this sets the - * required amount of padding. - */ - *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; - input_ptr += nc; - output_ptr++; - col_index = (col_index + 1) & ODITHER_MASK; - } - } - /* Advance row index for next row */ - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF void -quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int * dither0; /* points to active row of dither matrix */ - int * dither1; - int * dither2; - int row_index, col_index; /* current indexes into dither matrix */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - row_index = cquantize->row_index; - input_ptr = input_buf[row]; - output_ptr = output_buf[row]; - dither0 = cquantize->odither[0][row_index]; - dither1 = cquantize->odither[1][row_index]; - dither2 = cquantize->odither[2][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + - dither0[col_index]]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + - dither1[col_index]]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + - dither2[col_index]]); - *output_ptr++ = (JSAMPLE) pixcode; - col_index = (col_index + 1) & ODITHER_MASK; - } - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF void -quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register LOCFSERROR cur; /* current error or pixel value */ - LOCFSERROR belowerr; /* error for pixel below cur */ - LOCFSERROR bpreverr; /* error for below/prev col */ - LOCFSERROR bnexterr; /* error for below/next col */ - LOCFSERROR delta; - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - JSAMPROW colormap_ci; - int pixcode; - int nc = cinfo->out_color_components; - int dir; /* 1 for left-to-right, -1 for right-to-left */ - int dirnc; /* dir * nc */ - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - input_ptr += (width-1) * nc; /* so point to rightmost pixel */ - output_ptr += width-1; - dir = -1; - dirnc = -nc; - errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ - } else { - /* work left to right in this row */ - dir = 1; - dirnc = nc; - errorptr = cquantize->fserrors[ci]; /* => entry before first column */ - } - colorindex_ci = cquantize->colorindex[ci]; - colormap_ci = cquantize->sv_colormap[ci]; - /* Preset error values: no error propagated to first pixel from left */ - cur = 0; - /* and no error propagated to row below yet */ - belowerr = bpreverr = 0; - - for (col = width; col > 0; col--) { - /* cur holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE; this sets the required size - * of the range_limit array. - */ - cur += GETJSAMPLE(*input_ptr); - cur = GETJSAMPLE(range_limit[cur]); - /* Select output value, accumulate into output code for this pixel */ - pixcode = GETJSAMPLE(colorindex_ci[cur]); - *output_ptr += (JSAMPLE) pixcode; - /* Compute actual representation error at this pixel */ - /* Note: we can do this even though we don't have the final */ - /* pixel code, because the colormap is orthogonal. */ - cur -= GETJSAMPLE(colormap_ci[pixcode]); - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - bnexterr = cur; - delta = cur * 2; - cur += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr + cur); - cur += delta; /* form error * 5 */ - bpreverr = belowerr + cur; - belowerr = bnexterr; - cur += delta; /* form error * 7 */ - /* At this point cur contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - input_ptr += dirnc; /* advance input ptr to next column */ - output_ptr += dir; /* advance output ptr to next column */ - errorptr += dir; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error value into the - * final fserrors[] entry. Note we need not unload belowerr because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ - } - cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); - } -} - - -/* - * Allocate workspace for Floyd-Steinberg errors. - */ - -LOCAL void -alloc_fs_workspace (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) { - cquantize->fserrors[i] = (FSERRPTR) - (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - } -} - - -/* - * Initialize for one-pass color quantization. - */ - -METHODDEF void -start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - /* Install my colormap. */ - cinfo->colormap = cquantize->sv_colormap; - cinfo->actual_number_of_colors = cquantize->sv_actual; - - /* Initialize for desired dithering mode. */ - switch (cinfo->dither_mode) { - case JDITHER_NONE: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = color_quantize3; - else - cquantize->pub.color_quantize = color_quantize; - break; - case JDITHER_ORDERED: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = quantize3_ord_dither; - else - cquantize->pub.color_quantize = quantize_ord_dither; - cquantize->row_index = 0; /* initialize state for ordered dither */ - /* If user changed to ordered dither from another mode, - * we must recreate the color index table with padding. - * This will cost extra space, but probably isn't very likely. - */ - if (! cquantize->is_padded) - create_colorindex(cinfo); - /* Create ordered-dither tables if we didn't already. */ - if (cquantize->odither[0] == NULL) - create_odither_tables(cinfo); - break; - case JDITHER_FS: - cquantize->pub.color_quantize = quantize_fs_dither; - cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ - /* Allocate Floyd-Steinberg workspace if didn't already. */ - if (cquantize->fserrors[0] == NULL) - alloc_fs_workspace(cinfo); - /* Initialize the propagated errors to zero. */ - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) - jzero_far((void FAR *) cquantize->fserrors[i], arraysize); - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } -} - - -/* - * Finish up at the end of the pass. - */ - -METHODDEF void -finish_pass_1_quant (j_decompress_ptr cinfo) -{ - /* no work in 1-pass case */ -} - - -/* - * Switch to a new external colormap between output passes. - * Shouldn't get to this module! - */ - -METHODDEF void -new_color_map_1_quant (j_decompress_ptr cinfo) -{ - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - - -/* - * Module initialization routine for 1-pass color quantization. - */ - -GLOBAL void -jinit_1pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_1_quant; - cquantize->pub.finish_pass = finish_pass_1_quant; - cquantize->pub.new_color_map = new_color_map_1_quant; - cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ - cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ - - /* Make sure my internal arrays won't overflow */ - if (cinfo->out_color_components > MAX_Q_COMPS) - ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); - - /* Create the colormap and color index table. */ - create_colormap(cinfo); - create_colorindex(cinfo); - - /* Allocate Floyd-Steinberg workspace now if requested. - * We do this now since it is FAR storage and may affect the memory - * manager's space calculations. If the user changes to FS dither - * mode in a later pass, we will allocate the space then, and will - * possibly overrun the max_memory_to_use setting. - */ - if (cinfo->dither_mode == JDITHER_FS) - alloc_fs_workspace(cinfo); -} - -#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/third_party/jpeg-6/jquant2.c b/third_party/jpeg-6/jquant2.c deleted file mode 100644 index 2504398..0000000 --- a/third_party/jpeg-6/jquant2.c +++ /dev/null @@ -1,1310 +0,0 @@ -/* - * jquant2.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 2-pass color quantization (color mapping) routines. - * These routines provide selection of a custom color map for an image, - * followed by mapping of the image to that color map, with optional - * Floyd-Steinberg dithering. - * It is also possible to use just the second pass to map to an arbitrary - * externally-given color map. - * - * Note: ordered dithering is not supported, since there isn't any fast - * way to compute intercolor distances; it's unclear that ordered dither's - * fundamental assumptions even hold with an irregularly spaced color map. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_2PASS_SUPPORTED - - -/* - * This module implements the well-known Heckbert paradigm for color - * quantization. Most of the ideas used here can be traced back to - * Heckbert's seminal paper - * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", - * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. - * - * In the first pass over the image, we accumulate a histogram showing the - * usage count of each possible color. To keep the histogram to a reasonable - * size, we reduce the precision of the input; typical practice is to retain - * 5 or 6 bits per color, so that 8 or 4 different input values are counted - * in the same histogram cell. - * - * Next, the color-selection step begins with a box representing the whole - * color space, and repeatedly splits the "largest" remaining box until we - * have as many boxes as desired colors. Then the mean color in each - * remaining box becomes one of the possible output colors. - * - * The second pass over the image maps each input pixel to the closest output - * color (optionally after applying a Floyd-Steinberg dithering correction). - * This mapping is logically trivial, but making it go fast enough requires - * considerable care. - * - * Heckbert-style quantizers vary a good deal in their policies for choosing - * the "largest" box and deciding where to cut it. The particular policies - * used here have proved out well in experimental comparisons, but better ones - * may yet be found. - * - * In earlier versions of the IJG code, this module quantized in YCbCr color - * space, processing the raw upsampled data without a color conversion step. - * This allowed the color conversion math to be done only once per colormap - * entry, not once per pixel. However, that optimization precluded other - * useful optimizations (such as merging color conversion with upsampling) - * and it also interfered with desired capabilities such as quantizing to an - * externally-supplied colormap. We have therefore abandoned that approach. - * The present code works in the post-conversion color space, typically RGB. - * - * To improve the visual quality of the results, we actually work in scaled - * RGB space, giving G distances more weight than R, and R in turn more than - * B. To do everything in integer math, we must use integer scale factors. - * The 2/3/1 scale factors used here correspond loosely to the relative - * weights of the colors in the NTSC grayscale equation. - * If you want to use this code to quantize a non-RGB color space, you'll - * probably need to change these scale factors. - */ - -#define R_SCALE 2 /* scale R distances by this much */ -#define G_SCALE 3 /* scale G distances by this much */ -#define B_SCALE 1 /* and B by this much */ - -/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined - * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B - * and B,G,R orders. If you define some other weird order in jmorecfg.h, - * you'll get compile errors until you extend this logic. In that case - * you'll probably want to tweak the histogram sizes too. - */ - -#if RGB_RED == 0 -#define C0_SCALE R_SCALE -#endif -#if RGB_BLUE == 0 -#define C0_SCALE B_SCALE -#endif -#if RGB_GREEN == 1 -#define C1_SCALE G_SCALE -#endif -#if RGB_RED == 2 -#define C2_SCALE R_SCALE -#endif -#if RGB_BLUE == 2 -#define C2_SCALE B_SCALE -#endif - - -/* - * First we have the histogram data structure and routines for creating it. - * - * The number of bits of precision can be adjusted by changing these symbols. - * We recommend keeping 6 bits for G and 5 each for R and B. - * If you have plenty of memory and cycles, 6 bits all around gives marginally - * better results; if you are short of memory, 5 bits all around will save - * some space but degrade the results. - * To maintain a fully accurate histogram, we'd need to allocate a "long" - * (preferably unsigned long) for each cell. In practice this is overkill; - * we can get by with 16 bits per cell. Few of the cell counts will overflow, - * and clamping those that do overflow to the maximum value will give close- - * enough results. This reduces the recommended histogram size from 256Kb - * to 128Kb, which is a useful savings on PC-class machines. - * (In the second pass the histogram space is re-used for pixel mapping data; - * in that capacity, each cell must be able to store zero to the number of - * desired colors. 16 bits/cell is plenty for that too.) - * Since the JPEG code is intended to run in small memory model on 80x86 - * machines, we can't just allocate the histogram in one chunk. Instead - * of a true 3-D array, we use a row of pointers to 2-D arrays. Each - * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and - * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that - * on 80x86 machines, the pointer row is in near memory but the actual - * arrays are in far memory (same arrangement as we use for image arrays). - */ - -#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ - -/* These will do the right thing for either R,G,B or B,G,R color order, - * but you may not like the results for other color orders. - */ -#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ -#define HIST_C1_BITS 6 /* bits of precision in G histogram */ -#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ - -/* Number of elements along histogram axes. */ -#define HIST_C0_ELEMS (1<cquantize; - register JSAMPROW ptr; - register histptr histp; - register hist3d histogram = cquantize->histogram; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptr = input_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the histogram */ - histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] - [GETJSAMPLE(ptr[1]) >> C1_SHIFT] - [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; - /* increment, check for overflow and undo increment if so. */ - if (++(*histp) <= 0) - (*histp)--; - ptr += 3; - } - } -} - - -/* - * Next we have the really interesting routines: selection of a colormap - * given the completed histogram. - * These routines work with a list of "boxes", each representing a rectangular - * subset of the input color space (to histogram precision). - */ - -typedef struct { - /* The bounds of the box (inclusive); expressed as histogram indexes */ - int c0min, c0max; - int c1min, c1max; - int c2min, c2max; - /* The volume (actually 2-norm) of the box */ - INT32 volume; - /* The number of nonzero histogram cells within this box */ - long colorcount; -} box; - -typedef box * boxptr; - - -LOCAL boxptr -find_biggest_color_pop (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest color population */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register long maxc = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->colorcount > maxc && boxp->volume > 0) { - which = boxp; - maxc = boxp->colorcount; - } - } - return which; -} - - -LOCAL boxptr -find_biggest_volume (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest (scaled) volume */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register INT32 maxv = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->volume > maxv) { - which = boxp; - maxv = boxp->volume; - } - } - return which; -} - - -LOCAL void -update_box (j_decompress_ptr cinfo, boxptr boxp) -/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ -/* and recompute its volume and population */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - INT32 dist0,dist1,dist2; - long ccount; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - if (c0max > c0min) - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0min = c0min = c0; - goto have_c0min; - } - } - have_c0min: - if (c0max > c0min) - for (c0 = c0max; c0 >= c0min; c0--) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0max = c0max = c0; - goto have_c0max; - } - } - have_c0max: - if (c1max > c1min) - for (c1 = c1min; c1 <= c1max; c1++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1min = c1min = c1; - goto have_c1min; - } - } - have_c1min: - if (c1max > c1min) - for (c1 = c1max; c1 >= c1min; c1--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1max = c1max = c1; - goto have_c1max; - } - } - have_c1max: - if (c2max > c2min) - for (c2 = c2min; c2 <= c2max; c2++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2min = c2min = c2; - goto have_c2min; - } - } - have_c2min: - if (c2max > c2min) - for (c2 = c2max; c2 >= c2min; c2--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2max = c2max = c2; - goto have_c2max; - } - } - have_c2max: - - /* Update box volume. - * We use 2-norm rather than real volume here; this biases the method - * against making long narrow boxes, and it has the side benefit that - * a box is splittable iff norm > 0. - * Since the differences are expressed in histogram-cell units, - * we have to shift back to JSAMPLE units to get consistent distances; - * after which, we scale according to the selected distance scale factors. - */ - dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; - dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; - dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; - boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; - - /* Now scan remaining volume of box and compute population */ - ccount = 0; - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++, histp++) - if (*histp != 0) { - ccount++; - } - } - boxp->colorcount = ccount; -} - - -LOCAL int -median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, - int desired_colors) -/* Repeatedly select and split the largest box until we have enough boxes */ -{ - int n,lb; - int c0,c1,c2,cmax; - register boxptr b1,b2; - - while (numboxes < desired_colors) { - /* Select box to split. - * Current algorithm: by population for first half, then by volume. - */ - if (numboxes*2 <= desired_colors) { - b1 = find_biggest_color_pop(boxlist, numboxes); - } else { - b1 = find_biggest_volume(boxlist, numboxes); - } - if (b1 == NULL) /* no splittable boxes left! */ - break; - b2 = &boxlist[numboxes]; /* where new box will go */ - /* Copy the color bounds to the new box. */ - b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; - b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; - /* Choose which axis to split the box on. - * Current algorithm: longest scaled axis. - * See notes in update_box about scaling distances. - */ - c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; - c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; - c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; - /* We want to break any ties in favor of green, then red, blue last. - * This code does the right thing for R,G,B or B,G,R color orders only. - */ -#if RGB_RED == 0 - cmax = c1; n = 1; - if (c0 > cmax) { cmax = c0; n = 0; } - if (c2 > cmax) { n = 2; } -#else - cmax = c1; n = 1; - if (c2 > cmax) { cmax = c2; n = 2; } - if (c0 > cmax) { n = 0; } -#endif - /* Choose split point along selected axis, and update box bounds. - * Current algorithm: split at halfway point. - * (Since the box has been shrunk to minimum volume, - * any split will produce two nonempty subboxes.) - * Note that lb value is max for lower box, so must be < old max. - */ - switch (n) { - case 0: - lb = (b1->c0max + b1->c0min) / 2; - b1->c0max = lb; - b2->c0min = lb+1; - break; - case 1: - lb = (b1->c1max + b1->c1min) / 2; - b1->c1max = lb; - b2->c1min = lb+1; - break; - case 2: - lb = (b1->c2max + b1->c2min) / 2; - b1->c2max = lb; - b2->c2min = lb+1; - break; - } - /* Update stats for boxes */ - update_box(cinfo, b1); - update_box(cinfo, b2); - numboxes++; - } - return numboxes; -} - - -LOCAL void -compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) -/* Compute representative color for a box, put it in colormap[icolor] */ -{ - /* Current algorithm: mean weighted by pixels (not colors) */ - /* Note it is important to get the rounding correct! */ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - long count; - long total = 0; - long c0total = 0; - long c1total = 0; - long c2total = 0; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) { - if ((count = *histp++) != 0) { - total += count; - c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; - c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; - c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; - } - } - } - - cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); - cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); - cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); -} - - -LOCAL void -select_colors (j_decompress_ptr cinfo, int desired_colors) -/* Master routine for color selection */ -{ - boxptr boxlist; - int numboxes; - int i; - - /* Allocate workspace for box list */ - boxlist = (boxptr) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); - /* Initialize one box containing whole space */ - numboxes = 1; - boxlist[0].c0min = 0; - boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; - boxlist[0].c1min = 0; - boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; - boxlist[0].c2min = 0; - boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; - /* Shrink it to actually-used volume and set its statistics */ - update_box(cinfo, & boxlist[0]); - /* Perform median-cut to produce final box list */ - numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); - /* Compute the representative color for each box, fill colormap */ - for (i = 0; i < numboxes; i++) - compute_color(cinfo, & boxlist[i], i); - cinfo->actual_number_of_colors = numboxes; - TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); -} - - -/* - * These routines are concerned with the time-critical task of mapping input - * colors to the nearest color in the selected colormap. - * - * We re-use the histogram space as an "inverse color map", essentially a - * cache for the results of nearest-color searches. All colors within a - * histogram cell will be mapped to the same colormap entry, namely the one - * closest to the cell's center. This may not be quite the closest entry to - * the actual input color, but it's almost as good. A zero in the cache - * indicates we haven't found the nearest color for that cell yet; the array - * is cleared to zeroes before starting the mapping pass. When we find the - * nearest color for a cell, its colormap index plus one is recorded in the - * cache for future use. The pass2 scanning routines call fill_inverse_cmap - * when they need to use an unfilled entry in the cache. - * - * Our method of efficiently finding nearest colors is based on the "locally - * sorted search" idea described by Heckbert and on the incremental distance - * calculation described by Spencer W. Thomas in chapter III.1 of Graphics - * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that - * the distances from a given colormap entry to each cell of the histogram can - * be computed quickly using an incremental method: the differences between - * distances to adjacent cells themselves differ by a constant. This allows a - * fairly fast implementation of the "brute force" approach of computing the - * distance from every colormap entry to every histogram cell. Unfortunately, - * it needs a work array to hold the best-distance-so-far for each histogram - * cell (because the inner loop has to be over cells, not colormap entries). - * The work array elements have to be INT32s, so the work array would need - * 256Kb at our recommended precision. This is not feasible in DOS machines. - * - * To get around these problems, we apply Thomas' method to compute the - * nearest colors for only the cells within a small subbox of the histogram. - * The work array need be only as big as the subbox, so the memory usage - * problem is solved. Furthermore, we need not fill subboxes that are never - * referenced in pass2; many images use only part of the color gamut, so a - * fair amount of work is saved. An additional advantage of this - * approach is that we can apply Heckbert's locality criterion to quickly - * eliminate colormap entries that are far away from the subbox; typically - * three-fourths of the colormap entries are rejected by Heckbert's criterion, - * and we need not compute their distances to individual cells in the subbox. - * The speed of this approach is heavily influenced by the subbox size: too - * small means too much overhead, too big loses because Heckbert's criterion - * can't eliminate as many colormap entries. Empirically the best subbox - * size seems to be about 1/512th of the histogram (1/8th in each direction). - * - * Thomas' article also describes a refined method which is asymptotically - * faster than the brute-force method, but it is also far more complex and - * cannot efficiently be applied to small subboxes. It is therefore not - * useful for programs intended to be portable to DOS machines. On machines - * with plenty of memory, filling the whole histogram in one shot with Thomas' - * refined method might be faster than the present code --- but then again, - * it might not be any faster, and it's certainly more complicated. - */ - - -/* log2(histogram cells in update box) for each axis; this can be adjusted */ -#define BOX_C0_LOG (HIST_C0_BITS-3) -#define BOX_C1_LOG (HIST_C1_BITS-3) -#define BOX_C2_LOG (HIST_C2_BITS-3) - -#define BOX_C0_ELEMS (1<actual_number_of_colors; - int maxc0, maxc1, maxc2; - int centerc0, centerc1, centerc2; - int i, x, ncolors; - INT32 minmaxdist, min_dist, max_dist, tdist; - INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ - - /* Compute true coordinates of update box's upper corner and center. - * Actually we compute the coordinates of the center of the upper-corner - * histogram cell, which are the upper bounds of the volume we care about. - * Note that since ">>" rounds down, the "center" values may be closer to - * min than to max; hence comparisons to them must be "<=", not "<". - */ - maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); - centerc0 = (minc0 + maxc0) >> 1; - maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); - centerc1 = (minc1 + maxc1) >> 1; - maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); - centerc2 = (minc2 + maxc2) >> 1; - - /* For each color in colormap, find: - * 1. its minimum squared-distance to any point in the update box - * (zero if color is within update box); - * 2. its maximum squared-distance to any point in the update box. - * Both of these can be found by considering only the corners of the box. - * We save the minimum distance for each color in mindist[]; - * only the smallest maximum distance is of interest. - */ - minmaxdist = 0x7FFFFFFFL; - - for (i = 0; i < numcolors; i++) { - /* We compute the squared-c0-distance term, then add in the other two. */ - x = GETJSAMPLE(cinfo->colormap[0][i]); - if (x < minc0) { - tdist = (x - minc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else if (x > maxc0) { - tdist = (x - maxc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - min_dist = 0; - if (x <= centerc0) { - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[1][i]); - if (x < minc1) { - tdist = (x - minc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc1) { - tdist = (x - maxc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc1) { - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[2][i]); - if (x < minc2) { - tdist = (x - minc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc2) { - tdist = (x - maxc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc2) { - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } - } - - mindist[i] = min_dist; /* save away the results */ - if (max_dist < minmaxdist) - minmaxdist = max_dist; - } - - /* Now we know that no cell in the update box is more than minmaxdist - * away from some colormap entry. Therefore, only colors that are - * within minmaxdist of some part of the box need be considered. - */ - ncolors = 0; - for (i = 0; i < numcolors; i++) { - if (mindist[i] <= minmaxdist) - colorlist[ncolors++] = (JSAMPLE) i; - } - return ncolors; -} - - -LOCAL void -find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, - int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) -/* Find the closest colormap entry for each cell in the update box, - * given the list of candidate colors prepared by find_nearby_colors. - * Return the indexes of the closest entries in the bestcolor[] array. - * This routine uses Thomas' incremental distance calculation method to - * find the distance from a colormap entry to successive cells in the box. - */ -{ - int ic0, ic1, ic2; - int i, icolor; - register INT32 * bptr; /* pointer into bestdist[] array */ - JSAMPLE * cptr; /* pointer into bestcolor[] array */ - INT32 dist0, dist1; /* initial distance values */ - register INT32 dist2; /* current distance in inner loop */ - INT32 xx0, xx1; /* distance increments */ - register INT32 xx2; - INT32 inc0, inc1, inc2; /* initial values for increments */ - /* This array holds the distance to the nearest-so-far color for each cell */ - INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Initialize best-distance for each cell of the update box */ - bptr = bestdist; - for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) - *bptr++ = 0x7FFFFFFFL; - - /* For each color selected by find_nearby_colors, - * compute its distance to the center of each cell in the box. - * If that's less than best-so-far, update best distance and color number. - */ - - /* Nominal steps between cell centers ("x" in Thomas article) */ -#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) -#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) -#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) - - for (i = 0; i < numcolors; i++) { - icolor = GETJSAMPLE(colorlist[i]); - /* Compute (square of) distance from minc0/c1/c2 to this color */ - inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; - dist0 = inc0*inc0; - inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; - dist0 += inc1*inc1; - inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; - dist0 += inc2*inc2; - /* Form the initial difference increments */ - inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; - inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; - inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; - /* Now loop over all cells in box, updating distance per Thomas method */ - bptr = bestdist; - cptr = bestcolor; - xx0 = inc0; - for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { - dist1 = dist0; - xx1 = inc1; - for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { - dist2 = dist1; - xx2 = inc2; - for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { - if (dist2 < *bptr) { - *bptr = dist2; - *cptr = (JSAMPLE) icolor; - } - dist2 += xx2; - xx2 += 2 * STEP_C2 * STEP_C2; - bptr++; - cptr++; - } - dist1 += xx1; - xx1 += 2 * STEP_C1 * STEP_C1; - } - dist0 += xx0; - xx0 += 2 * STEP_C0 * STEP_C0; - } - } -} - - -LOCAL void -fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) -/* Fill the inverse-colormap entries in the update box that contains */ -/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ -/* we can fill as many others as we wish.) */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int minc0, minc1, minc2; /* lower left corner of update box */ - int ic0, ic1, ic2; - register JSAMPLE * cptr; /* pointer into bestcolor[] array */ - register histptr cachep; /* pointer into main cache array */ - /* This array lists the candidate colormap indexes. */ - JSAMPLE colorlist[MAXNUMCOLORS]; - int numcolors; /* number of candidate colors */ - /* This array holds the actually closest colormap index for each cell. */ - JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Convert cell coordinates to update box ID */ - c0 >>= BOX_C0_LOG; - c1 >>= BOX_C1_LOG; - c2 >>= BOX_C2_LOG; - - /* Compute true coordinates of update box's origin corner. - * Actually we compute the coordinates of the center of the corner - * histogram cell, which are the lower bounds of the volume we care about. - */ - minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); - minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); - minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); - - /* Determine which colormap entries are close enough to be candidates - * for the nearest entry to some cell in the update box. - */ - numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); - - /* Determine the actually nearest colors. */ - find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, - bestcolor); - - /* Save the best color numbers (plus 1) in the main cache array */ - c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ - c1 <<= BOX_C1_LOG; - c2 <<= BOX_C2_LOG; - cptr = bestcolor; - for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { - for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { - cachep = & histogram[c0+ic0][c1+ic1][c2]; - for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { - *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); - } - } - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF void -pass2_no_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register JSAMPROW inptr, outptr; - register histptr cachep; - register int c0, c1, c2; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the cache */ - c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; - c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; - c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; - cachep = & histogram[c0][c1][c2]; - /* If we have not seen this color before, find nearest colormap entry */ - /* and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, c0,c1,c2); - /* Now emit the colormap index for this cell */ - *outptr++ = (JSAMPLE) (*cachep - 1); - } - } -} - - -METHODDEF void -pass2_fs_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ - LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ - LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - JSAMPROW inptr; /* => current input pixel */ - JSAMPROW outptr; /* => current output pixel */ - histptr cachep; - int dir; /* +1 or -1 depending on direction */ - int dir3; /* 3*dir, for advancing inptr & errorptr */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - int *error_limit = cquantize->error_limiter; - JSAMPROW colormap0 = cinfo->colormap[0]; - JSAMPROW colormap1 = cinfo->colormap[1]; - JSAMPROW colormap2 = cinfo->colormap[2]; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - inptr += (width-1) * 3; /* so point to rightmost pixel */ - outptr += width-1; - dir = -1; - dir3 = -3; - errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ - cquantize->on_odd_row = FALSE; /* flip for next time */ - } else { - /* work left to right in this row */ - dir = 1; - dir3 = 3; - errorptr = cquantize->fserrors; /* => entry before first real column */ - cquantize->on_odd_row = TRUE; /* flip for next time */ - } - /* Preset error values: no error propagated to first pixel from left */ - cur0 = cur1 = cur2 = 0; - /* and no error propagated to row below yet */ - belowerr0 = belowerr1 = belowerr2 = 0; - bpreverr0 = bpreverr1 = bpreverr2 = 0; - - for (col = width; col > 0; col--) { - /* curN holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); - cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); - cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); - /* Limit the error using transfer function set by init_error_limit. - * See comments with init_error_limit for rationale. - */ - cur0 = error_limit[cur0]; - cur1 = error_limit[cur1]; - cur2 = error_limit[cur2]; - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE (or less with error limiting); - * this sets the required size of the range_limit array. - */ - cur0 += GETJSAMPLE(inptr[0]); - cur1 += GETJSAMPLE(inptr[1]); - cur2 += GETJSAMPLE(inptr[2]); - cur0 = GETJSAMPLE(range_limit[cur0]); - cur1 = GETJSAMPLE(range_limit[cur1]); - cur2 = GETJSAMPLE(range_limit[cur2]); - /* Index into the cache with adjusted pixel value */ - cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; - /* If we have not seen this color before, find nearest colormap */ - /* entry and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); - /* Now emit the colormap index for this cell */ - { register int pixcode = *cachep - 1; - *outptr = (JSAMPLE) pixcode; - /* Compute representation error for this pixel */ - cur0 -= GETJSAMPLE(colormap0[pixcode]); - cur1 -= GETJSAMPLE(colormap1[pixcode]); - cur2 -= GETJSAMPLE(colormap2[pixcode]); - } - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - { register LOCFSERROR bnexterr, delta; - - bnexterr = cur0; /* Process component 0 */ - delta = cur0 * 2; - cur0 += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr0 + cur0); - cur0 += delta; /* form error * 5 */ - bpreverr0 = belowerr0 + cur0; - belowerr0 = bnexterr; - cur0 += delta; /* form error * 7 */ - bnexterr = cur1; /* Process component 1 */ - delta = cur1 * 2; - cur1 += delta; /* form error * 3 */ - errorptr[1] = (FSERROR) (bpreverr1 + cur1); - cur1 += delta; /* form error * 5 */ - bpreverr1 = belowerr1 + cur1; - belowerr1 = bnexterr; - cur1 += delta; /* form error * 7 */ - bnexterr = cur2; /* Process component 2 */ - delta = cur2 * 2; - cur2 += delta; /* form error * 3 */ - errorptr[2] = (FSERROR) (bpreverr2 + cur2); - cur2 += delta; /* form error * 5 */ - bpreverr2 = belowerr2 + cur2; - belowerr2 = bnexterr; - cur2 += delta; /* form error * 7 */ - } - /* At this point curN contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - inptr += dir3; /* Advance pixel pointers to next column */ - outptr += dir; - errorptr += dir3; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error values into the - * final fserrors[] entry. Note we need not unload belowerrN because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ - errorptr[1] = (FSERROR) bpreverr1; - errorptr[2] = (FSERROR) bpreverr2; - } -} - - -/* - * Initialize the error-limiting transfer function (lookup table). - * The raw F-S error computation can potentially compute error values of up to - * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be - * much less, otherwise obviously wrong pixels will be created. (Typical - * effects include weird fringes at color-area boundaries, isolated bright - * pixels in a dark area, etc.) The standard advice for avoiding this problem - * is to ensure that the "corners" of the color cube are allocated as output - * colors; then repeated errors in the same direction cannot cause cascading - * error buildup. However, that only prevents the error from getting - * completely out of hand; Aaron Giles reports that error limiting improves - * the results even with corner colors allocated. - * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty - * well, but the smoother transfer function used below is even better. Thanks - * to Aaron Giles for this idea. - */ - -LOCAL void -init_error_limit (j_decompress_ptr cinfo) -/* Allocate and fill in the error_limiter table */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - int * table; - int in, out; - - table = (int *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); - table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ - cquantize->error_limiter = table; - -#define STEPSIZE ((MAXJSAMPLE+1)/16) - /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ - out = 0; - for (in = 0; in < STEPSIZE; in++, out++) { - table[in] = out; table[-in] = -out; - } - /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ - for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { - table[in] = out; table[-in] = -out; - } - /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ - for (; in <= MAXJSAMPLE; in++) { - table[in] = out; table[-in] = -out; - } -#undef STEPSIZE -} - - -/* - * Finish up at the end of each pass. - */ - -METHODDEF void -finish_pass1 (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Select the representative colors and fill in cinfo->colormap */ - cinfo->colormap = cquantize->sv_colormap; - select_colors(cinfo, cquantize->desired); - /* Force next pass to zero the color index table */ - cquantize->needs_zeroed = TRUE; -} - - -METHODDEF void -finish_pass2 (j_decompress_ptr cinfo) -{ - /* no work */ -} - - -/* - * Initialize for each processing pass. - */ - -METHODDEF void -start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int i; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - if (is_pre_scan) { - /* Set up method pointers */ - cquantize->pub.color_quantize = prescan_quantize; - cquantize->pub.finish_pass = finish_pass1; - cquantize->needs_zeroed = TRUE; /* Always zero histogram */ - } else { - /* Set up method pointers */ - if (cinfo->dither_mode == JDITHER_FS) - cquantize->pub.color_quantize = pass2_fs_dither; - else - cquantize->pub.color_quantize = pass2_no_dither; - cquantize->pub.finish_pass = finish_pass2; - - /* Make sure color count is acceptable */ - i = cinfo->actual_number_of_colors; - if (i < 1) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); - if (i > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - - if (cinfo->dither_mode == JDITHER_FS) { - size_t arraysize = (size_t) ((cinfo->output_width + 2) * - (3 * SIZEOF(FSERROR))); - /* Allocate Floyd-Steinberg workspace if we didn't already. */ - if (cquantize->fserrors == NULL) - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - /* Initialize the propagated errors to zero. */ - jzero_far((void FAR *) cquantize->fserrors, arraysize); - /* Make the error-limit table if we didn't already. */ - if (cquantize->error_limiter == NULL) - init_error_limit(cinfo); - cquantize->on_odd_row = FALSE; - } - - } - /* Zero the histogram or inverse color map, if necessary */ - if (cquantize->needs_zeroed) { - for (i = 0; i < HIST_C0_ELEMS; i++) { - jzero_far((void FAR *) histogram[i], - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = FALSE; - } -} - - -/* - * Switch to a new external colormap between output passes. - */ - -METHODDEF void -new_color_map_2_quant (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Reset the inverse color map */ - cquantize->needs_zeroed = TRUE; -} - - -/* - * Module initialization routine for 2-pass color quantization. - */ - -GLOBAL void -jinit_2pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - int i; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_2_quant; - cquantize->pub.new_color_map = new_color_map_2_quant; - cquantize->fserrors = NULL; /* flag optional arrays not allocated */ - cquantize->error_limiter = NULL; - - /* Make sure jdmaster didn't give me a case I can't handle */ - if (cinfo->out_color_components != 3) - ERREXIT(cinfo, JERR_NOTIMPL); - - /* Allocate the histogram/inverse colormap storage */ - cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); - for (i = 0; i < HIST_C0_ELEMS; i++) { - cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ - - /* Allocate storage for the completed colormap, if required. - * We do this now since it is FAR storage and may affect - * the memory manager's space calculations. - */ - if (cinfo->enable_2pass_quant) { - /* Make sure color count is acceptable */ - int desired = cinfo->desired_number_of_colors; - /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ - if (desired < 8) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (desired > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); - cquantize->desired = desired; - } else - cquantize->sv_colormap = NULL; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - /* Allocate Floyd-Steinberg workspace if necessary. - * This isn't really needed until pass 2, but again it is FAR storage. - * Although we will cope with a later change in dither_mode, - * we do not promise to honor max_memory_to_use if dither_mode changes. - */ - if (cinfo->dither_mode == JDITHER_FS) { - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); - /* Might as well create the error-limiting table too. */ - init_error_limit(cinfo); - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/third_party/jpeg-6/jutils.c b/third_party/jpeg-6/jutils.c deleted file mode 100644 index 4ba2a54..0000000 --- a/third_party/jpeg-6/jutils.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * jutils.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains tables and miscellaneous utility routines needed - * for both compression and decompression. - * Note we prefix all global names with "j" to minimize conflicts with - * a surrounding application. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element - * of a DCT block read in natural order (left to right, top to bottom). - */ - -const int jpeg_zigzag_order[DCTSIZE2] = { - 0, 1, 5, 6, 14, 15, 27, 28, - 2, 4, 7, 13, 16, 26, 29, 42, - 3, 8, 12, 17, 25, 30, 41, 43, - 9, 11, 18, 24, 31, 40, 44, 53, - 10, 19, 23, 32, 39, 45, 52, 54, - 20, 22, 33, 38, 46, 51, 55, 60, - 21, 34, 37, 47, 50, 56, 59, 61, - 35, 36, 48, 49, 57, 58, 62, 63 -}; - -/* - * jpeg_natural_order[i] is the natural-order position of the i'th element - * of zigzag order. - * - * When reading corrupted data, the Huffman decoders could attempt - * to reference an entry beyond the end of this array (if the decoded - * zero run length reaches past the end of the block). To prevent - * wild stores without adding an inner-loop test, we put some extra - * "63"s after the real entries. This will cause the extra coefficient - * to be stored in location 63 of the block, not somewhere random. - * The worst case would be a run-length of 15, which means we need 16 - * fake entries. - */ - -const int jpeg_natural_order[DCTSIZE2+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 48, 41, 34, - 27, 20, 13, 6, 7, 14, 21, 28, - 35, 42, 49, 56, 57, 50, 43, 36, - 29, 22, 15, 23, 30, 37, 44, 51, - 58, 59, 52, 45, 38, 31, 39, 46, - 53, 60, 61, 54, 47, 55, 62, 63, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - - -/* - * Arithmetic utilities - */ - -GLOBAL long -jdiv_round_up (long a, long b) -/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ -/* Assumes a >= 0, b > 0 */ -{ - return (a + b - 1L) / b; -} - - -GLOBAL long -jround_up (long a, long b) -/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ -/* Assumes a >= 0, b > 0 */ -{ - a += b - 1L; - return a - (a % b); -} - - -/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays - * and coefficient-block arrays. This won't work on 80x86 because the arrays - * are FAR and we're assuming a small-pointer memory model. However, some - * DOS compilers provide far-pointer versions of memcpy() and memset() even - * in the small-model libraries. These will be used if USE_FMEM is defined. - * Otherwise, the routines below do it the hard way. (The performance cost - * is not all that great, because these routines aren't very heavily used.) - */ - -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ -#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) -#define FMEMZERO(target,size) MEMZERO(target,size) -#else /* 80x86 case, define if we can */ -#ifdef USE_FMEM -#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) -#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) -#endif -#endif - - -GLOBAL void -jcopy_sample_rows (JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols) -/* Copy some rows of samples from one place to another. - * num_rows rows are copied from input_array[source_row++] - * to output_array[dest_row++]; these areas may overlap for duplication. - * The source and destination arrays must be at least as wide as num_cols. - */ -{ - register JSAMPROW inptr, outptr; -#ifdef FMEMCOPY - register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); -#else - register JDIMENSION count; -#endif - register int row; - - input_array += source_row; - output_array += dest_row; - - for (row = num_rows; row > 0; row--) { - inptr = *input_array++; - outptr = *output_array++; -#ifdef FMEMCOPY - FMEMCOPY(outptr, inptr, count); -#else - for (count = num_cols; count > 0; count--) - *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ -#endif - } -} - - -GLOBAL void -jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks) -/* Copy a row of coefficient blocks from one place to another. */ -{ -#ifdef FMEMCOPY - FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); -#else - register JCOEFPTR inptr, outptr; - register long count; - - inptr = (JCOEFPTR) input_row; - outptr = (JCOEFPTR) output_row; - for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { - *outptr++ = *inptr++; - } -#endif -} - - -GLOBAL void -jzero_far (void FAR * target, size_t bytestozero) -/* Zero out a chunk of FAR memory. */ -/* This might be sample-array data, block-array data, or alloc_large data. */ -{ -#ifdef FMEMZERO - FMEMZERO(target, bytestozero); -#else - register char FAR * ptr = (char FAR *) target; - register size_t count; - - for (count = bytestozero; count > 0; count--) { - *ptr++ = 0; - } -#endif -} diff --git a/third_party/jpeg-6/jversion.h b/third_party/jpeg-6/jversion.h deleted file mode 100644 index f2f1b8d..0000000 --- a/third_party/jpeg-6/jversion.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * jversion.h - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains software version identification. - */ - - -#define JVERSION "6 2-Aug-95" - -#define JCOPYRIGHT "Copyright (C) 1995, Thomas G. Lane" diff --git a/third_party/stb_image.h b/third_party/stb_image.h new file mode 100644 index 0000000..023d247 --- /dev/null +++ b/third_party/stb_image.h @@ -0,0 +1,7049 @@ +/* stb_image - v2.14 - public domain image loader - http://nothings.org/stb_image.h + no warranty implied; use at your own risk + + Do this: + #define STB_IMAGE_IMPLEMENTATION + before you include this file in *one* C or C++ file to create the implementation. + + // i.e. it should look like this: + #include ... + #include ... + #include ... + #define STB_IMAGE_IMPLEMENTATION + #include "stb_image.h" + + You can #define STBI_ASSERT(x) before the #include to avoid using assert.h. + And #define STBI_MALLOC, STBI_REALLOC, and STBI_FREE to avoid using malloc,realloc,free + + + QUICK NOTES: + Primarily of interest to game developers and other people who can + avoid problematic images and only need the trivial interface + + JPEG baseline & progressive (12 bpc/arithmetic not supported, same as stock IJG lib) + PNG 1/2/4/8/16-bit-per-channel + + TGA (not sure what subset, if a subset) + BMP non-1bpp, non-RLE + PSD (composited view only, no extra channels, 8/16 bit-per-channel) + + GIF (*comp always reports as 4-channel) + HDR (radiance rgbE format) + PIC (Softimage PIC) + PNM (PPM and PGM binary only) + + Animated GIF still needs a proper API, but here's one way to do it: + http://gist.github.com/urraka/685d9a6340b26b830d49 + + - decode from memory or through FILE (define STBI_NO_STDIO to remove code) + - decode from arbitrary I/O callbacks + - SIMD acceleration on x86/x64 (SSE2) and ARM (NEON) + + Full documentation under "DOCUMENTATION" below. + + +LICENSE + + See end of file for license information. + +RECENT REVISION HISTORY: + + 2.14 (2017-03-03) remove deprecated STBI_JPEG_OLD; fixes for Imagenet JPGs + 2.13 (2016-12-04) experimental 16-bit API, only for PNG so far; fixes + 2.12 (2016-04-02) fix typo in 2.11 PSD fix that caused crashes + 2.11 (2016-04-02) 16-bit PNGS; enable SSE2 in non-gcc x64 + RGB-format JPEG; remove white matting in PSD; + allocate large structures on the stack; + correct channel count for PNG & BMP + 2.10 (2016-01-22) avoid warning introduced in 2.09 + 2.09 (2016-01-16) 16-bit TGA; comments in PNM files; STBI_REALLOC_SIZED + 2.08 (2015-09-13) fix to 2.07 cleanup, reading RGB PSD as RGBA + 2.07 (2015-09-13) partial animated GIF support + limited 16-bit PSD support + minor bugs, code cleanup, and compiler warnings + + See end of file for full revision history. + + + ============================ Contributors ========================= + + Image formats Extensions, features + Sean Barrett (jpeg, png, bmp) Jetro Lauha (stbi_info) + Nicolas Schulz (hdr, psd) Martin "SpartanJ" Golini (stbi_info) + Jonathan Dummer (tga) James "moose2000" Brown (iPhone PNG) + Jean-Marc Lienher (gif) Ben "Disch" Wenger (io callbacks) + Tom Seddon (pic) Omar Cornut (1/2/4-bit PNG) + Thatcher Ulrich (psd) Nicolas Guillemot (vertical flip) + Ken Miller (pgm, ppm) Richard Mitton (16-bit PSD) + github:urraka (animated gif) Junggon Kim (PNM comments) + Daniel Gibson (16-bit TGA) + socks-the-fox (16-bit TGA) + Jeremy Sawicki (handle all ImageNet JPGs) + Optimizations & bugfixes + Fabian "ryg" Giesen + Arseny Kapoulkine + + Bug & warning fixes + Marc LeBlanc David Woo Guillaume George Martins Mozeiko + Christpher Lloyd Martin Golini Jerry Jansson Joseph Thomson + Dave Moore Roy Eltham Hayaki Saito Phil Jordan + Won Chun Luke Graham Johan Duparc Nathan Reed + the Horde3D community Thomas Ruf Ronny Chevalier Nick Verigakis + Janez Zemva John Bartholomew Michal Cichon github:svdijk + Jonathan Blow Ken Hamada Tero Hanninen Baldur Karlsson + Laurent Gomila Cort Stratton Sergio Gonzalez github:romigrou + Aruelien Pocheville Thibault Reuille Cass Everitt Matthew Gregan + Ryamond Barbiero Paul Du Bois Engin Manap github:snagar + Michaelangel007@github Oriol Ferrer Mesia Dale Weiler github:Zelex + Philipp Wiesemann Josh Tobin github:rlyeh github:grim210@github + Blazej Dariusz Roszkowski github:sammyhw + +*/ + +#ifndef STBI_INCLUDE_STB_IMAGE_H +#define STBI_INCLUDE_STB_IMAGE_H + +// DOCUMENTATION +// +// Limitations: +// - no 16-bit-per-channel PNG +// - no 12-bit-per-channel JPEG +// - no JPEGs with arithmetic coding +// - no 1-bit BMP +// - GIF always returns *comp=4 +// +// Basic usage (see HDR discussion below for HDR usage): +// int x,y,n; +// unsigned char *data = stbi_load(filename, &x, &y, &n, 0); +// // ... process data if not NULL ... +// // ... x = width, y = height, n = # 8-bit components per pixel ... +// // ... replace '0' with '1'..'4' to force that many components per pixel +// // ... but 'n' will always be the number that it would have been if you said 0 +// stbi_image_free(data) +// +// Standard parameters: +// int *x -- outputs image width in pixels +// int *y -- outputs image height in pixels +// int *channels_in_file -- outputs # of image components in image file +// int desired_channels -- if non-zero, # of image components requested in result +// +// The return value from an image loader is an 'unsigned char *' which points +// to the pixel data, or NULL on an allocation failure or if the image is +// corrupt or invalid. The pixel data consists of *y scanlines of *x pixels, +// with each pixel consisting of N interleaved 8-bit components; the first +// pixel pointed to is top-left-most in the image. There is no padding between +// image scanlines or between pixels, regardless of format. The number of +// components N is 'req_comp' if req_comp is non-zero, or *comp otherwise. +// If req_comp is non-zero, *comp has the number of components that _would_ +// have been output otherwise. E.g. if you set req_comp to 4, you will always +// get RGBA output, but you can check *comp to see if it's trivially opaque +// because e.g. there were only 3 channels in the source image. +// +// An output image with N components has the following components interleaved +// in this order in each pixel: +// +// N=#comp components +// 1 grey +// 2 grey, alpha +// 3 red, green, blue +// 4 red, green, blue, alpha +// +// If image loading fails for any reason, the return value will be NULL, +// and *x, *y, *comp will be unchanged. The function stbi_failure_reason() +// can be queried for an extremely brief, end-user unfriendly explanation +// of why the load failed. Define STBI_NO_FAILURE_STRINGS to avoid +// compiling these strings at all, and STBI_FAILURE_USERMSG to get slightly +// more user-friendly ones. +// +// Paletted PNG, BMP, GIF, and PIC images are automatically depalettized. +// +// =========================================================================== +// +// Philosophy +// +// stb libraries are designed with the following priorities: +// +// 1. easy to use +// 2. easy to maintain +// 3. good performance +// +// Sometimes I let "good performance" creep up in priority over "easy to maintain", +// and for best performance I may provide less-easy-to-use APIs that give higher +// performance, in addition to the easy to use ones. Nevertheless, it's important +// to keep in mind that from the standpoint of you, a client of this library, +// all you care about is #1 and #3, and stb libraries DO NOT emphasize #3 above all. +// +// Some secondary priorities arise directly from the first two, some of which +// make more explicit reasons why performance can't be emphasized. +// +// - Portable ("ease of use") +// - Small source code footprint ("easy to maintain") +// - No dependencies ("ease of use") +// +// =========================================================================== +// +// I/O callbacks +// +// I/O callbacks allow you to read from arbitrary sources, like packaged +// files or some other source. Data read from callbacks are processed +// through a small internal buffer (currently 128 bytes) to try to reduce +// overhead. +// +// The three functions you must define are "read" (reads some bytes of data), +// "skip" (skips some bytes of data), "eof" (reports if the stream is at the end). +// +// =========================================================================== +// +// SIMD support +// +// The JPEG decoder will try to automatically use SIMD kernels on x86 when +// supported by the compiler. For ARM Neon support, you must explicitly +// request it. +// +// (The old do-it-yourself SIMD API is no longer supported in the current +// code.) +// +// On x86, SSE2 will automatically be used when available based on a run-time +// test; if not, the generic C versions are used as a fall-back. On ARM targets, +// the typical path is to have separate builds for NEON and non-NEON devices +// (at least this is true for iOS and Android). Therefore, the NEON support is +// toggled by a build flag: define STBI_NEON to get NEON loops. +// +// If for some reason you do not want to use any of SIMD code, or if +// you have issues compiling it, you can disable it entirely by +// defining STBI_NO_SIMD. +// +// =========================================================================== +// +// HDR image support (disable by defining STBI_NO_HDR) +// +// stb_image now supports loading HDR images in general, and currently +// the Radiance .HDR file format, although the support is provided +// generically. You can still load any file through the existing interface; +// if you attempt to load an HDR file, it will be automatically remapped to +// LDR, assuming gamma 2.2 and an arbitrary scale factor defaulting to 1; +// both of these constants can be reconfigured through this interface: +// +// stbi_hdr_to_ldr_gamma(2.2f); +// stbi_hdr_to_ldr_scale(1.0f); +// +// (note, do not use _inverse_ constants; stbi_image will invert them +// appropriately). +// +// Additionally, there is a new, parallel interface for loading files as +// (linear) floats to preserve the full dynamic range: +// +// float *data = stbi_loadf(filename, &x, &y, &n, 0); +// +// If you load LDR images through this interface, those images will +// be promoted to floating point values, run through the inverse of +// constants corresponding to the above: +// +// stbi_ldr_to_hdr_scale(1.0f); +// stbi_ldr_to_hdr_gamma(2.2f); +// +// Finally, given a filename (or an open file or memory block--see header +// file for details) containing image data, you can query for the "most +// appropriate" interface to use (that is, whether the image is HDR or +// not), using: +// +// stbi_is_hdr(char *filename); +// +// =========================================================================== +// +// iPhone PNG support: +// +// By default we convert iphone-formatted PNGs back to RGB, even though +// they are internally encoded differently. You can disable this conversion +// by by calling stbi_convert_iphone_png_to_rgb(0), in which case +// you will always just get the native iphone "format" through (which +// is BGR stored in RGB). +// +// Call stbi_set_unpremultiply_on_load(1) as well to force a divide per +// pixel to remove any premultiplied alpha *only* if the image file explicitly +// says there's premultiplied data (currently only happens in iPhone images, +// and only if iPhone convert-to-rgb processing is on). +// +// =========================================================================== +// +// ADDITIONAL CONFIGURATION +// +// - You can suppress implementation of any of the decoders to reduce +// your code footprint by #defining one or more of the following +// symbols before creating the implementation. +// +// STBI_NO_JPEG +// STBI_NO_PNG +// STBI_NO_BMP +// STBI_NO_PSD +// STBI_NO_TGA +// STBI_NO_GIF +// STBI_NO_HDR +// STBI_NO_PIC +// STBI_NO_PNM (.ppm and .pgm) +// +// - You can request *only* certain decoders and suppress all other ones +// (this will be more forward-compatible, as addition of new decoders +// doesn't require you to disable them explicitly): +// +// STBI_ONLY_JPEG +// STBI_ONLY_PNG +// STBI_ONLY_BMP +// STBI_ONLY_PSD +// STBI_ONLY_TGA +// STBI_ONLY_GIF +// STBI_ONLY_HDR +// STBI_ONLY_PIC +// STBI_ONLY_PNM (.ppm and .pgm) +// +// - If you use STBI_NO_PNG (or _ONLY_ without PNG), and you still +// want the zlib decoder to be available, #define STBI_SUPPORT_ZLIB +// + + +#ifndef STBI_NO_STDIO +#include +#endif // STBI_NO_STDIO + +#define STBI_VERSION 1 + +enum +{ + STBI_default = 0, // only used for req_comp + + STBI_grey = 1, + STBI_grey_alpha = 2, + STBI_rgb = 3, + STBI_rgb_alpha = 4 +}; + +typedef unsigned char stbi_uc; +typedef unsigned short stbi_us; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef STB_IMAGE_STATIC +#define STBIDEF static +#else +#define STBIDEF extern +#endif + +////////////////////////////////////////////////////////////////////////////// +// +// PRIMARY API - works on images of any type +// + +// +// load image by filename, open file, or memory buffer +// + +typedef struct +{ + int (*read) (void *user,char *data,int size); // fill 'data' with 'size' bytes. return number of bytes actually read + void (*skip) (void *user,int n); // skip the next 'n' bytes, or 'unget' the last -n bytes if negative + int (*eof) (void *user); // returns nonzero if we are at end of file/data +} stbi_io_callbacks; + +//////////////////////////////////// +// +// 8-bits-per-channel interface +// + +STBIDEF stbi_uc *stbi_load (char const *filename, int *x, int *y, int *channels_in_file, int desired_channels); +STBIDEF stbi_uc *stbi_load_from_memory (stbi_uc const *buffer, int len , int *x, int *y, int *channels_in_file, int desired_channels); +STBIDEF stbi_uc *stbi_load_from_callbacks(stbi_io_callbacks const *clbk , void *user, int *x, int *y, int *channels_in_file, int desired_channels); + +#ifndef STBI_NO_STDIO +STBIDEF stbi_uc *stbi_load_from_file (FILE *f, int *x, int *y, int *channels_in_file, int desired_channels); +// for stbi_load_from_file, file pointer is left pointing immediately after image +#endif + +//////////////////////////////////// +// +// 16-bits-per-channel interface +// + +STBIDEF stbi_us *stbi_load_16(char const *filename, int *x, int *y, int *channels_in_file, int desired_channels); +#ifndef STBI_NO_STDIO +STBIDEF stbi_us *stbi_load_from_file_16(FILE *f, int *x, int *y, int *channels_in_file, int desired_channels); +#endif +// @TODO the other variants + +//////////////////////////////////// +// +// float-per-channel interface +// +#ifndef STBI_NO_LINEAR + STBIDEF float *stbi_loadf (char const *filename, int *x, int *y, int *channels_in_file, int desired_channels); + STBIDEF float *stbi_loadf_from_memory (stbi_uc const *buffer, int len, int *x, int *y, int *channels_in_file, int desired_channels); + STBIDEF float *stbi_loadf_from_callbacks (stbi_io_callbacks const *clbk, void *user, int *x, int *y, int *channels_in_file, int desired_channels); + + #ifndef STBI_NO_STDIO + STBIDEF float *stbi_loadf_from_file (FILE *f, int *x, int *y, int *channels_in_file, int desired_channels); + #endif +#endif + +#ifndef STBI_NO_HDR + STBIDEF void stbi_hdr_to_ldr_gamma(float gamma); + STBIDEF void stbi_hdr_to_ldr_scale(float scale); +#endif // STBI_NO_HDR + +#ifndef STBI_NO_LINEAR + STBIDEF void stbi_ldr_to_hdr_gamma(float gamma); + STBIDEF void stbi_ldr_to_hdr_scale(float scale); +#endif // STBI_NO_LINEAR + +// stbi_is_hdr is always defined, but always returns false if STBI_NO_HDR +STBIDEF int stbi_is_hdr_from_callbacks(stbi_io_callbacks const *clbk, void *user); +STBIDEF int stbi_is_hdr_from_memory(stbi_uc const *buffer, int len); +#ifndef STBI_NO_STDIO +STBIDEF int stbi_is_hdr (char const *filename); +STBIDEF int stbi_is_hdr_from_file(FILE *f); +#endif // STBI_NO_STDIO + + +// get a VERY brief reason for failure +// NOT THREADSAFE +STBIDEF const char *stbi_failure_reason (void); + +// free the loaded image -- this is just free() +STBIDEF void stbi_image_free (void *retval_from_stbi_load); + +// get image dimensions & components without fully decoding +STBIDEF int stbi_info_from_memory(stbi_uc const *buffer, int len, int *x, int *y, int *comp); +STBIDEF int stbi_info_from_callbacks(stbi_io_callbacks const *clbk, void *user, int *x, int *y, int *comp); + +#ifndef STBI_NO_STDIO +STBIDEF int stbi_info (char const *filename, int *x, int *y, int *comp); +STBIDEF int stbi_info_from_file (FILE *f, int *x, int *y, int *comp); + +#endif + + + +// for image formats that explicitly notate that they have premultiplied alpha, +// we just return the colors as stored in the file. set this flag to force +// unpremultiplication. results are undefined if the unpremultiply overflow. +STBIDEF void stbi_set_unpremultiply_on_load(int flag_true_if_should_unpremultiply); + +// indicate whether we should process iphone images back to canonical format, +// or just pass them through "as-is" +STBIDEF void stbi_convert_iphone_png_to_rgb(int flag_true_if_should_convert); + +// flip the image vertically, so the first pixel in the output array is the bottom left +STBIDEF void stbi_set_flip_vertically_on_load(int flag_true_if_should_flip); + +// ZLIB client - used by PNG, available for other purposes + +STBIDEF char *stbi_zlib_decode_malloc_guesssize(const char *buffer, int len, int initial_size, int *outlen); +STBIDEF char *stbi_zlib_decode_malloc_guesssize_headerflag(const char *buffer, int len, int initial_size, int *outlen, int parse_header); +STBIDEF char *stbi_zlib_decode_malloc(const char *buffer, int len, int *outlen); +STBIDEF int stbi_zlib_decode_buffer(char *obuffer, int olen, const char *ibuffer, int ilen); + +STBIDEF char *stbi_zlib_decode_noheader_malloc(const char *buffer, int len, int *outlen); +STBIDEF int stbi_zlib_decode_noheader_buffer(char *obuffer, int olen, const char *ibuffer, int ilen); + + +#ifdef __cplusplus +} +#endif + +// +// +//// end header file ///////////////////////////////////////////////////// +#endif // STBI_INCLUDE_STB_IMAGE_H + +#ifdef STB_IMAGE_IMPLEMENTATION + +#if defined(STBI_ONLY_JPEG) || defined(STBI_ONLY_PNG) || defined(STBI_ONLY_BMP) \ + || defined(STBI_ONLY_TGA) || defined(STBI_ONLY_GIF) || defined(STBI_ONLY_PSD) \ + || defined(STBI_ONLY_HDR) || defined(STBI_ONLY_PIC) || defined(STBI_ONLY_PNM) \ + || defined(STBI_ONLY_ZLIB) + #ifndef STBI_ONLY_JPEG + #define STBI_NO_JPEG + #endif + #ifndef STBI_ONLY_PNG + #define STBI_NO_PNG + #endif + #ifndef STBI_ONLY_BMP + #define STBI_NO_BMP + #endif + #ifndef STBI_ONLY_PSD + #define STBI_NO_PSD + #endif + #ifndef STBI_ONLY_TGA + #define STBI_NO_TGA + #endif + #ifndef STBI_ONLY_GIF + #define STBI_NO_GIF + #endif + #ifndef STBI_ONLY_HDR + #define STBI_NO_HDR + #endif + #ifndef STBI_ONLY_PIC + #define STBI_NO_PIC + #endif + #ifndef STBI_ONLY_PNM + #define STBI_NO_PNM + #endif +#endif + +#if defined(STBI_NO_PNG) && !defined(STBI_SUPPORT_ZLIB) && !defined(STBI_NO_ZLIB) +#define STBI_NO_ZLIB +#endif + + +#include +#include // ptrdiff_t on osx +#include +#include +#include + +#if !defined(STBI_NO_LINEAR) || !defined(STBI_NO_HDR) +#include // ldexp +#endif + +#ifndef STBI_NO_STDIO +#include +#endif + +#ifndef STBI_ASSERT +#include +#define STBI_ASSERT(x) assert(x) +#endif + + +#ifndef _MSC_VER + #ifdef __cplusplus + #define stbi_inline inline + #else + #define stbi_inline + #endif +#else + #define stbi_inline __forceinline +#endif + + +#ifdef _MSC_VER +typedef unsigned short stbi__uint16; +typedef signed short stbi__int16; +typedef unsigned int stbi__uint32; +typedef signed int stbi__int32; +#else +#include +typedef uint16_t stbi__uint16; +typedef int16_t stbi__int16; +typedef uint32_t stbi__uint32; +typedef int32_t stbi__int32; +#endif + +// should produce compiler error if size is wrong +typedef unsigned char validate_uint32[sizeof(stbi__uint32)==4 ? 1 : -1]; + +#ifdef _MSC_VER +#define STBI_NOTUSED(v) (void)(v) +#else +#define STBI_NOTUSED(v) (void)sizeof(v) +#endif + +#ifdef _MSC_VER +#define STBI_HAS_LROTL +#endif + +#ifdef STBI_HAS_LROTL + #define stbi_lrot(x,y) _lrotl(x,y) +#else + #define stbi_lrot(x,y) (((x) << (y)) | ((x) >> (32 - (y)))) +#endif + +#if defined(STBI_MALLOC) && defined(STBI_FREE) && (defined(STBI_REALLOC) || defined(STBI_REALLOC_SIZED)) +// ok +#elif !defined(STBI_MALLOC) && !defined(STBI_FREE) && !defined(STBI_REALLOC) && !defined(STBI_REALLOC_SIZED) +// ok +#else +#error "Must define all or none of STBI_MALLOC, STBI_FREE, and STBI_REALLOC (or STBI_REALLOC_SIZED)." +#endif + +#ifndef STBI_MALLOC +#define STBI_MALLOC(sz) malloc(sz) +#define STBI_REALLOC(p,newsz) realloc(p,newsz) +#define STBI_FREE(p) free(p) +#endif + +#ifndef STBI_REALLOC_SIZED +#define STBI_REALLOC_SIZED(p,oldsz,newsz) STBI_REALLOC(p,newsz) +#endif + +// x86/x64 detection +#if defined(__x86_64__) || defined(_M_X64) +#define STBI__X64_TARGET +#elif defined(__i386) || defined(_M_IX86) +#define STBI__X86_TARGET +#endif + +#if defined(__GNUC__) && (defined(STBI__X86_TARGET) || defined(STBI__X64_TARGET)) && !defined(__SSE2__) && !defined(STBI_NO_SIMD) +// NOTE: not clear do we actually need this for the 64-bit path? +// gcc doesn't support sse2 intrinsics unless you compile with -msse2, +// (but compiling with -msse2 allows the compiler to use SSE2 everywhere; +// this is just broken and gcc are jerks for not fixing it properly +// http://www.virtualdub.org/blog/pivot/entry.php?id=363 ) +#define STBI_NO_SIMD +#endif + +#if defined(__MINGW32__) && defined(STBI__X86_TARGET) && !defined(STBI_MINGW_ENABLE_SSE2) && !defined(STBI_NO_SIMD) +// Note that __MINGW32__ doesn't actually mean 32-bit, so we have to avoid STBI__X64_TARGET +// +// 32-bit MinGW wants ESP to be 16-byte aligned, but this is not in the +// Windows ABI and VC++ as well as Windows DLLs don't maintain that invariant. +// As a result, enabling SSE2 on 32-bit MinGW is dangerous when not +// simultaneously enabling "-mstackrealign". +// +// See https://github.com/nothings/stb/issues/81 for more information. +// +// So default to no SSE2 on 32-bit MinGW. If you've read this far and added +// -mstackrealign to your build settings, feel free to #define STBI_MINGW_ENABLE_SSE2. +#define STBI_NO_SIMD +#endif + +#if !defined(STBI_NO_SIMD) && (defined(STBI__X86_TARGET) || defined(STBI__X64_TARGET)) +#define STBI_SSE2 +#include + +#ifdef _MSC_VER + +#if _MSC_VER >= 1400 // not VC6 +#include // __cpuid +static int stbi__cpuid3(void) +{ + int info[4]; + __cpuid(info,1); + return info[3]; +} +#else +static int stbi__cpuid3(void) +{ + int res; + __asm { + mov eax,1 + cpuid + mov res,edx + } + return res; +} +#endif + +#define STBI_SIMD_ALIGN(type, name) __declspec(align(16)) type name + +static int stbi__sse2_available() +{ + int info3 = stbi__cpuid3(); + return ((info3 >> 26) & 1) != 0; +} +#else // assume GCC-style if not VC++ +#define STBI_SIMD_ALIGN(type, name) type name __attribute__((aligned(16))) + +static int stbi__sse2_available() +{ +#if defined(__GNUC__) && (__GNUC__ * 100 + __GNUC_MINOR__) >= 408 // GCC 4.8 or later + // GCC 4.8+ has a nice way to do this + return __builtin_cpu_supports("sse2"); +#else + // portable way to do this, preferably without using GCC inline ASM? + // just bail for now. + return 0; +#endif +} +#endif +#endif + +// ARM NEON +#if defined(STBI_NO_SIMD) && defined(STBI_NEON) +#undef STBI_NEON +#endif + +#ifdef STBI_NEON +#include +// assume GCC or Clang on ARM targets +#define STBI_SIMD_ALIGN(type, name) type name __attribute__((aligned(16))) +#endif + +#ifndef STBI_SIMD_ALIGN +#define STBI_SIMD_ALIGN(type, name) type name +#endif + +/////////////////////////////////////////////// +// +// stbi__context struct and start_xxx functions + +// stbi__context structure is our basic context used by all images, so it +// contains all the IO context, plus some basic image information +typedef struct +{ + stbi__uint32 img_x, img_y; + int img_n, img_out_n; + + stbi_io_callbacks io; + void *io_user_data; + + int read_from_callbacks; + int buflen; + stbi_uc buffer_start[128]; + + stbi_uc *img_buffer, *img_buffer_end; + stbi_uc *img_buffer_original, *img_buffer_original_end; +} stbi__context; + + +static void stbi__refill_buffer(stbi__context *s); + +// initialize a memory-decode context +static void stbi__start_mem(stbi__context *s, stbi_uc const *buffer, int len) +{ + s->io.read = NULL; + s->read_from_callbacks = 0; + s->img_buffer = s->img_buffer_original = (stbi_uc *) buffer; + s->img_buffer_end = s->img_buffer_original_end = (stbi_uc *) buffer+len; +} + +// initialize a callback-based context +static void stbi__start_callbacks(stbi__context *s, stbi_io_callbacks *c, void *user) +{ + s->io = *c; + s->io_user_data = user; + s->buflen = sizeof(s->buffer_start); + s->read_from_callbacks = 1; + s->img_buffer_original = s->buffer_start; + stbi__refill_buffer(s); + s->img_buffer_original_end = s->img_buffer_end; +} + +#ifndef STBI_NO_STDIO + +static int stbi__stdio_read(void *user, char *data, int size) +{ + return (int) fread(data,1,size,(FILE*) user); +} + +static void stbi__stdio_skip(void *user, int n) +{ + fseek((FILE*) user, n, SEEK_CUR); +} + +static int stbi__stdio_eof(void *user) +{ + return feof((FILE*) user); +} + +static stbi_io_callbacks stbi__stdio_callbacks = +{ + stbi__stdio_read, + stbi__stdio_skip, + stbi__stdio_eof, +}; + +static void stbi__start_file(stbi__context *s, FILE *f) +{ + stbi__start_callbacks(s, &stbi__stdio_callbacks, (void *) f); +} + +//static void stop_file(stbi__context *s) { } + +#endif // !STBI_NO_STDIO + +static void stbi__rewind(stbi__context *s) +{ + // conceptually rewind SHOULD rewind to the beginning of the stream, + // but we just rewind to the beginning of the initial buffer, because + // we only use it after doing 'test', which only ever looks at at most 92 bytes + s->img_buffer = s->img_buffer_original; + s->img_buffer_end = s->img_buffer_original_end; +} + +enum +{ + STBI_ORDER_RGB, + STBI_ORDER_BGR +}; + +typedef struct +{ + int bits_per_channel; + int num_channels; + int channel_order; +} stbi__result_info; + +#ifndef STBI_NO_JPEG +static int stbi__jpeg_test(stbi__context *s); +static void *stbi__jpeg_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__jpeg_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_PNG +static int stbi__png_test(stbi__context *s); +static void *stbi__png_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__png_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_BMP +static int stbi__bmp_test(stbi__context *s); +static void *stbi__bmp_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__bmp_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_TGA +static int stbi__tga_test(stbi__context *s); +static void *stbi__tga_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__tga_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_PSD +static int stbi__psd_test(stbi__context *s); +static void *stbi__psd_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri, int bpc); +static int stbi__psd_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_HDR +static int stbi__hdr_test(stbi__context *s); +static float *stbi__hdr_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__hdr_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_PIC +static int stbi__pic_test(stbi__context *s); +static void *stbi__pic_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__pic_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_GIF +static int stbi__gif_test(stbi__context *s); +static void *stbi__gif_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__gif_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +#ifndef STBI_NO_PNM +static int stbi__pnm_test(stbi__context *s); +static void *stbi__pnm_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri); +static int stbi__pnm_info(stbi__context *s, int *x, int *y, int *comp); +#endif + +// this is not threadsafe +static const char *stbi__g_failure_reason; + +STBIDEF const char *stbi_failure_reason(void) +{ + return stbi__g_failure_reason; +} + +static int stbi__err(const char *str) +{ + stbi__g_failure_reason = str; + return 0; +} + +static void *stbi__malloc(size_t size) +{ + return STBI_MALLOC(size); +} + +// stb_image uses ints pervasively, including for offset calculations. +// therefore the largest decoded image size we can support with the +// current code, even on 64-bit targets, is INT_MAX. this is not a +// significant limitation for the intended use case. +// +// we do, however, need to make sure our size calculations don't +// overflow. hence a few helper functions for size calculations that +// multiply integers together, making sure that they're non-negative +// and no overflow occurs. + +// return 1 if the sum is valid, 0 on overflow. +// negative terms are considered invalid. +static int stbi__addsizes_valid(int a, int b) +{ + if (b < 0) return 0; + // now 0 <= b <= INT_MAX, hence also + // 0 <= INT_MAX - b <= INTMAX. + // And "a + b <= INT_MAX" (which might overflow) is the + // same as a <= INT_MAX - b (no overflow) + return a <= INT_MAX - b; +} + +// returns 1 if the product is valid, 0 on overflow. +// negative factors are considered invalid. +static int stbi__mul2sizes_valid(int a, int b) +{ + if (a < 0 || b < 0) return 0; + if (b == 0) return 1; // mul-by-0 is always safe + // portable way to check for no overflows in a*b + return a <= INT_MAX/b; +} + +// returns 1 if "a*b + add" has no negative terms/factors and doesn't overflow +static int stbi__mad2sizes_valid(int a, int b, int add) +{ + return stbi__mul2sizes_valid(a, b) && stbi__addsizes_valid(a*b, add); +} + +// returns 1 if "a*b*c + add" has no negative terms/factors and doesn't overflow +static int stbi__mad3sizes_valid(int a, int b, int c, int add) +{ + return stbi__mul2sizes_valid(a, b) && stbi__mul2sizes_valid(a*b, c) && + stbi__addsizes_valid(a*b*c, add); +} + +// returns 1 if "a*b*c*d + add" has no negative terms/factors and doesn't overflow +static int stbi__mad4sizes_valid(int a, int b, int c, int d, int add) +{ + return stbi__mul2sizes_valid(a, b) && stbi__mul2sizes_valid(a*b, c) && + stbi__mul2sizes_valid(a*b*c, d) && stbi__addsizes_valid(a*b*c*d, add); +} + +// mallocs with size overflow checking +static void *stbi__malloc_mad2(int a, int b, int add) +{ + if (!stbi__mad2sizes_valid(a, b, add)) return NULL; + return stbi__malloc(a*b + add); +} + +static void *stbi__malloc_mad3(int a, int b, int c, int add) +{ + if (!stbi__mad3sizes_valid(a, b, c, add)) return NULL; + return stbi__malloc(a*b*c + add); +} + +static void *stbi__malloc_mad4(int a, int b, int c, int d, int add) +{ + if (!stbi__mad4sizes_valid(a, b, c, d, add)) return NULL; + return stbi__malloc(a*b*c*d + add); +} + +// stbi__err - error +// stbi__errpf - error returning pointer to float +// stbi__errpuc - error returning pointer to unsigned char + +#ifdef STBI_NO_FAILURE_STRINGS + #define stbi__err(x,y) 0 +#elif defined(STBI_FAILURE_USERMSG) + #define stbi__err(x,y) stbi__err(y) +#else + #define stbi__err(x,y) stbi__err(x) +#endif + +#define stbi__errpf(x,y) ((float *)(size_t) (stbi__err(x,y)?NULL:NULL)) +#define stbi__errpuc(x,y) ((unsigned char *)(size_t) (stbi__err(x,y)?NULL:NULL)) + +STBIDEF void stbi_image_free(void *retval_from_stbi_load) +{ + STBI_FREE(retval_from_stbi_load); +} + +#ifndef STBI_NO_LINEAR +static float *stbi__ldr_to_hdr(stbi_uc *data, int x, int y, int comp); +#endif + +#ifndef STBI_NO_HDR +static stbi_uc *stbi__hdr_to_ldr(float *data, int x, int y, int comp); +#endif + +static int stbi__vertically_flip_on_load = 0; + +STBIDEF void stbi_set_flip_vertically_on_load(int flag_true_if_should_flip) +{ + stbi__vertically_flip_on_load = flag_true_if_should_flip; +} + +static void *stbi__load_main(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri, int bpc) +{ + memset(ri, 0, sizeof(*ri)); // make sure it's initialized if we add new fields + ri->bits_per_channel = 8; // default is 8 so most paths don't have to be changed + ri->channel_order = STBI_ORDER_RGB; // all current input & output are this, but this is here so we can add BGR order + ri->num_channels = 0; + + #ifndef STBI_NO_JPEG + if (stbi__jpeg_test(s)) return stbi__jpeg_load(s,x,y,comp,req_comp, ri); + #endif + #ifndef STBI_NO_PNG + if (stbi__png_test(s)) return stbi__png_load(s,x,y,comp,req_comp, ri); + #endif + #ifndef STBI_NO_BMP + if (stbi__bmp_test(s)) return stbi__bmp_load(s,x,y,comp,req_comp, ri); + #endif + #ifndef STBI_NO_GIF + if (stbi__gif_test(s)) return stbi__gif_load(s,x,y,comp,req_comp, ri); + #endif + #ifndef STBI_NO_PSD + if (stbi__psd_test(s)) return stbi__psd_load(s,x,y,comp,req_comp, ri, bpc); + #endif + #ifndef STBI_NO_PIC + if (stbi__pic_test(s)) return stbi__pic_load(s,x,y,comp,req_comp, ri); + #endif + #ifndef STBI_NO_PNM + if (stbi__pnm_test(s)) return stbi__pnm_load(s,x,y,comp,req_comp, ri); + #endif + + #ifndef STBI_NO_HDR + if (stbi__hdr_test(s)) { + float *hdr = stbi__hdr_load(s, x,y,comp,req_comp, ri); + return stbi__hdr_to_ldr(hdr, *x, *y, req_comp ? req_comp : *comp); + } + #endif + + #ifndef STBI_NO_TGA + // test tga last because it's a crappy test! + if (stbi__tga_test(s)) + return stbi__tga_load(s,x,y,comp,req_comp, ri); + #endif + + return stbi__errpuc("unknown image type", "Image not of any known type, or corrupt"); +} + +static stbi_uc *stbi__convert_16_to_8(stbi__uint16 *orig, int w, int h, int channels) +{ + int i; + int img_len = w * h * channels; + stbi_uc *reduced; + + reduced = (stbi_uc *) stbi__malloc(img_len); + if (reduced == NULL) return stbi__errpuc("outofmem", "Out of memory"); + + for (i = 0; i < img_len; ++i) + reduced[i] = (stbi_uc)((orig[i] >> 8) & 0xFF); // top half of each byte is sufficient approx of 16->8 bit scaling + + STBI_FREE(orig); + return reduced; +} + +static stbi__uint16 *stbi__convert_8_to_16(stbi_uc *orig, int w, int h, int channels) +{ + int i; + int img_len = w * h * channels; + stbi__uint16 *enlarged; + + enlarged = (stbi__uint16 *) stbi__malloc(img_len*2); + if (enlarged == NULL) return (stbi__uint16 *) stbi__errpuc("outofmem", "Out of memory"); + + for (i = 0; i < img_len; ++i) + enlarged[i] = (stbi__uint16)((orig[i] << 8) + orig[i]); // replicate to high and low byte, maps 0->0, 255->0xffff + + STBI_FREE(orig); + return enlarged; +} + +static unsigned char *stbi__load_and_postprocess_8bit(stbi__context *s, int *x, int *y, int *comp, int req_comp) +{ + stbi__result_info ri; + void *result = stbi__load_main(s, x, y, comp, req_comp, &ri, 8); + + if (result == NULL) + return NULL; + + if (ri.bits_per_channel != 8) { + STBI_ASSERT(ri.bits_per_channel == 16); + result = stbi__convert_16_to_8((stbi__uint16 *) result, *x, *y, req_comp == 0 ? *comp : req_comp); + ri.bits_per_channel = 8; + } + + // @TODO: move stbi__convert_format to here + + if (stbi__vertically_flip_on_load) { + int w = *x, h = *y; + int channels = req_comp ? req_comp : *comp; + int row,col,z; + stbi_uc *image = (stbi_uc *) result; + + // @OPTIMIZE: use a bigger temp buffer and memcpy multiple pixels at once + for (row = 0; row < (h>>1); row++) { + for (col = 0; col < w; col++) { + for (z = 0; z < channels; z++) { + stbi_uc temp = image[(row * w + col) * channels + z]; + image[(row * w + col) * channels + z] = image[((h - row - 1) * w + col) * channels + z]; + image[((h - row - 1) * w + col) * channels + z] = temp; + } + } + } + } + + return (unsigned char *) result; +} + +static stbi__uint16 *stbi__load_and_postprocess_16bit(stbi__context *s, int *x, int *y, int *comp, int req_comp) +{ + stbi__result_info ri; + void *result = stbi__load_main(s, x, y, comp, req_comp, &ri, 16); + + if (result == NULL) + return NULL; + + if (ri.bits_per_channel != 16) { + STBI_ASSERT(ri.bits_per_channel == 8); + result = stbi__convert_8_to_16((stbi_uc *) result, *x, *y, req_comp == 0 ? *comp : req_comp); + ri.bits_per_channel = 16; + } + + // @TODO: move stbi__convert_format16 to here + // @TODO: special case RGB-to-Y (and RGBA-to-YA) for 8-bit-to-16-bit case to keep more precision + + if (stbi__vertically_flip_on_load) { + int w = *x, h = *y; + int channels = req_comp ? req_comp : *comp; + int row,col,z; + stbi__uint16 *image = (stbi__uint16 *) result; + + // @OPTIMIZE: use a bigger temp buffer and memcpy multiple pixels at once + for (row = 0; row < (h>>1); row++) { + for (col = 0; col < w; col++) { + for (z = 0; z < channels; z++) { + stbi__uint16 temp = image[(row * w + col) * channels + z]; + image[(row * w + col) * channels + z] = image[((h - row - 1) * w + col) * channels + z]; + image[((h - row - 1) * w + col) * channels + z] = temp; + } + } + } + } + + return (stbi__uint16 *) result; +} + +#ifndef STBI_NO_HDR +static void stbi__float_postprocess(float *result, int *x, int *y, int *comp, int req_comp) +{ + if (stbi__vertically_flip_on_load && result != NULL) { + int w = *x, h = *y; + int depth = req_comp ? req_comp : *comp; + int row,col,z; + float temp; + + // @OPTIMIZE: use a bigger temp buffer and memcpy multiple pixels at once + for (row = 0; row < (h>>1); row++) { + for (col = 0; col < w; col++) { + for (z = 0; z < depth; z++) { + temp = result[(row * w + col) * depth + z]; + result[(row * w + col) * depth + z] = result[((h - row - 1) * w + col) * depth + z]; + result[((h - row - 1) * w + col) * depth + z] = temp; + } + } + } + } +} +#endif + +#ifndef STBI_NO_STDIO + +static FILE *stbi__fopen(char const *filename, char const *mode) +{ + FILE *f; +#if defined(_MSC_VER) && _MSC_VER >= 1400 + if (0 != fopen_s(&f, filename, mode)) + f=0; +#else + f = fopen(filename, mode); +#endif + return f; +} + + +STBIDEF stbi_uc *stbi_load(char const *filename, int *x, int *y, int *comp, int req_comp) +{ + FILE *f = stbi__fopen(filename, "rb"); + unsigned char *result; + if (!f) return stbi__errpuc("can't fopen", "Unable to open file"); + result = stbi_load_from_file(f,x,y,comp,req_comp); + fclose(f); + return result; +} + +STBIDEF stbi_uc *stbi_load_from_file(FILE *f, int *x, int *y, int *comp, int req_comp) +{ + unsigned char *result; + stbi__context s; + stbi__start_file(&s,f); + result = stbi__load_and_postprocess_8bit(&s,x,y,comp,req_comp); + if (result) { + // need to 'unget' all the characters in the IO buffer + fseek(f, - (int) (s.img_buffer_end - s.img_buffer), SEEK_CUR); + } + return result; +} + +STBIDEF stbi__uint16 *stbi_load_from_file_16(FILE *f, int *x, int *y, int *comp, int req_comp) +{ + stbi__uint16 *result; + stbi__context s; + stbi__start_file(&s,f); + result = stbi__load_and_postprocess_16bit(&s,x,y,comp,req_comp); + if (result) { + // need to 'unget' all the characters in the IO buffer + fseek(f, - (int) (s.img_buffer_end - s.img_buffer), SEEK_CUR); + } + return result; +} + +STBIDEF stbi_us *stbi_load_16(char const *filename, int *x, int *y, int *comp, int req_comp) +{ + FILE *f = stbi__fopen(filename, "rb"); + stbi__uint16 *result; + if (!f) return (stbi_us *) stbi__errpuc("can't fopen", "Unable to open file"); + result = stbi_load_from_file_16(f,x,y,comp,req_comp); + fclose(f); + return result; +} + + +#endif //!STBI_NO_STDIO + +STBIDEF stbi_uc *stbi_load_from_memory(stbi_uc const *buffer, int len, int *x, int *y, int *comp, int req_comp) +{ + stbi__context s; + stbi__start_mem(&s,buffer,len); + return stbi__load_and_postprocess_8bit(&s,x,y,comp,req_comp); +} + +STBIDEF stbi_uc *stbi_load_from_callbacks(stbi_io_callbacks const *clbk, void *user, int *x, int *y, int *comp, int req_comp) +{ + stbi__context s; + stbi__start_callbacks(&s, (stbi_io_callbacks *) clbk, user); + return stbi__load_and_postprocess_8bit(&s,x,y,comp,req_comp); +} + +#ifndef STBI_NO_LINEAR +static float *stbi__loadf_main(stbi__context *s, int *x, int *y, int *comp, int req_comp) +{ + unsigned char *data; + #ifndef STBI_NO_HDR + if (stbi__hdr_test(s)) { + stbi__result_info ri; + float *hdr_data = stbi__hdr_load(s,x,y,comp,req_comp, &ri); + if (hdr_data) + stbi__float_postprocess(hdr_data,x,y,comp,req_comp); + return hdr_data; + } + #endif + data = stbi__load_and_postprocess_8bit(s, x, y, comp, req_comp); + if (data) + return stbi__ldr_to_hdr(data, *x, *y, req_comp ? req_comp : *comp); + return stbi__errpf("unknown image type", "Image not of any known type, or corrupt"); +} + +STBIDEF float *stbi_loadf_from_memory(stbi_uc const *buffer, int len, int *x, int *y, int *comp, int req_comp) +{ + stbi__context s; + stbi__start_mem(&s,buffer,len); + return stbi__loadf_main(&s,x,y,comp,req_comp); +} + +STBIDEF float *stbi_loadf_from_callbacks(stbi_io_callbacks const *clbk, void *user, int *x, int *y, int *comp, int req_comp) +{ + stbi__context s; + stbi__start_callbacks(&s, (stbi_io_callbacks *) clbk, user); + return stbi__loadf_main(&s,x,y,comp,req_comp); +} + +#ifndef STBI_NO_STDIO +STBIDEF float *stbi_loadf(char const *filename, int *x, int *y, int *comp, int req_comp) +{ + float *result; + FILE *f = stbi__fopen(filename, "rb"); + if (!f) return stbi__errpf("can't fopen", "Unable to open file"); + result = stbi_loadf_from_file(f,x,y,comp,req_comp); + fclose(f); + return result; +} + +STBIDEF float *stbi_loadf_from_file(FILE *f, int *x, int *y, int *comp, int req_comp) +{ + stbi__context s; + stbi__start_file(&s,f); + return stbi__loadf_main(&s,x,y,comp,req_comp); +} +#endif // !STBI_NO_STDIO + +#endif // !STBI_NO_LINEAR + +// these is-hdr-or-not is defined independent of whether STBI_NO_LINEAR is +// defined, for API simplicity; if STBI_NO_LINEAR is defined, it always +// reports false! + +STBIDEF int stbi_is_hdr_from_memory(stbi_uc const *buffer, int len) +{ + #ifndef STBI_NO_HDR + stbi__context s; + stbi__start_mem(&s,buffer,len); + return stbi__hdr_test(&s); + #else + STBI_NOTUSED(buffer); + STBI_NOTUSED(len); + return 0; + #endif +} + +#ifndef STBI_NO_STDIO +STBIDEF int stbi_is_hdr (char const *filename) +{ + FILE *f = stbi__fopen(filename, "rb"); + int result=0; + if (f) { + result = stbi_is_hdr_from_file(f); + fclose(f); + } + return result; +} + +STBIDEF int stbi_is_hdr_from_file(FILE *f) +{ + #ifndef STBI_NO_HDR + stbi__context s; + stbi__start_file(&s,f); + return stbi__hdr_test(&s); + #else + STBI_NOTUSED(f); + return 0; + #endif +} +#endif // !STBI_NO_STDIO + +STBIDEF int stbi_is_hdr_from_callbacks(stbi_io_callbacks const *clbk, void *user) +{ + #ifndef STBI_NO_HDR + stbi__context s; + stbi__start_callbacks(&s, (stbi_io_callbacks *) clbk, user); + return stbi__hdr_test(&s); + #else + STBI_NOTUSED(clbk); + STBI_NOTUSED(user); + return 0; + #endif +} + +#ifndef STBI_NO_LINEAR +static float stbi__l2h_gamma=2.2f, stbi__l2h_scale=1.0f; + +STBIDEF void stbi_ldr_to_hdr_gamma(float gamma) { stbi__l2h_gamma = gamma; } +STBIDEF void stbi_ldr_to_hdr_scale(float scale) { stbi__l2h_scale = scale; } +#endif + +static float stbi__h2l_gamma_i=1.0f/2.2f, stbi__h2l_scale_i=1.0f; + +STBIDEF void stbi_hdr_to_ldr_gamma(float gamma) { stbi__h2l_gamma_i = 1/gamma; } +STBIDEF void stbi_hdr_to_ldr_scale(float scale) { stbi__h2l_scale_i = 1/scale; } + + +////////////////////////////////////////////////////////////////////////////// +// +// Common code used by all image loaders +// + +enum +{ + STBI__SCAN_load=0, + STBI__SCAN_type, + STBI__SCAN_header +}; + +static void stbi__refill_buffer(stbi__context *s) +{ + int n = (s->io.read)(s->io_user_data,(char*)s->buffer_start,s->buflen); + if (n == 0) { + // at end of file, treat same as if from memory, but need to handle case + // where s->img_buffer isn't pointing to safe memory, e.g. 0-byte file + s->read_from_callbacks = 0; + s->img_buffer = s->buffer_start; + s->img_buffer_end = s->buffer_start+1; + *s->img_buffer = 0; + } else { + s->img_buffer = s->buffer_start; + s->img_buffer_end = s->buffer_start + n; + } +} + +stbi_inline static stbi_uc stbi__get8(stbi__context *s) +{ + if (s->img_buffer < s->img_buffer_end) + return *s->img_buffer++; + if (s->read_from_callbacks) { + stbi__refill_buffer(s); + return *s->img_buffer++; + } + return 0; +} + +stbi_inline static int stbi__at_eof(stbi__context *s) +{ + if (s->io.read) { + if (!(s->io.eof)(s->io_user_data)) return 0; + // if feof() is true, check if buffer = end + // special case: we've only got the special 0 character at the end + if (s->read_from_callbacks == 0) return 1; + } + + return s->img_buffer >= s->img_buffer_end; +} + +static void stbi__skip(stbi__context *s, int n) +{ + if (n < 0) { + s->img_buffer = s->img_buffer_end; + return; + } + if (s->io.read) { + int blen = (int) (s->img_buffer_end - s->img_buffer); + if (blen < n) { + s->img_buffer = s->img_buffer_end; + (s->io.skip)(s->io_user_data, n - blen); + return; + } + } + s->img_buffer += n; +} + +static int stbi__getn(stbi__context *s, stbi_uc *buffer, int n) +{ + if (s->io.read) { + int blen = (int) (s->img_buffer_end - s->img_buffer); + if (blen < n) { + int res, count; + + memcpy(buffer, s->img_buffer, blen); + + count = (s->io.read)(s->io_user_data, (char*) buffer + blen, n - blen); + res = (count == (n-blen)); + s->img_buffer = s->img_buffer_end; + return res; + } + } + + if (s->img_buffer+n <= s->img_buffer_end) { + memcpy(buffer, s->img_buffer, n); + s->img_buffer += n; + return 1; + } else + return 0; +} + +static int stbi__get16be(stbi__context *s) +{ + int z = stbi__get8(s); + return (z << 8) + stbi__get8(s); +} + +static stbi__uint32 stbi__get32be(stbi__context *s) +{ + stbi__uint32 z = stbi__get16be(s); + return (z << 16) + stbi__get16be(s); +} + +#if defined(STBI_NO_BMP) && defined(STBI_NO_TGA) && defined(STBI_NO_GIF) +// nothing +#else +static int stbi__get16le(stbi__context *s) +{ + int z = stbi__get8(s); + return z + (stbi__get8(s) << 8); +} +#endif + +#ifndef STBI_NO_BMP +static stbi__uint32 stbi__get32le(stbi__context *s) +{ + stbi__uint32 z = stbi__get16le(s); + return z + (stbi__get16le(s) << 16); +} +#endif + +#define STBI__BYTECAST(x) ((stbi_uc) ((x) & 255)) // truncate int to byte without warnings + + +////////////////////////////////////////////////////////////////////////////// +// +// generic converter from built-in img_n to req_comp +// individual types do this automatically as much as possible (e.g. jpeg +// does all cases internally since it needs to colorspace convert anyway, +// and it never has alpha, so very few cases ). png can automatically +// interleave an alpha=255 channel, but falls back to this for other cases +// +// assume data buffer is malloced, so malloc a new one and free that one +// only failure mode is malloc failing + +static stbi_uc stbi__compute_y(int r, int g, int b) +{ + return (stbi_uc) (((r*77) + (g*150) + (29*b)) >> 8); +} + +static unsigned char *stbi__convert_format(unsigned char *data, int img_n, int req_comp, unsigned int x, unsigned int y) +{ + int i,j; + unsigned char *good; + + if (req_comp == img_n) return data; + STBI_ASSERT(req_comp >= 1 && req_comp <= 4); + + good = (unsigned char *) stbi__malloc_mad3(req_comp, x, y, 0); + if (good == NULL) { + STBI_FREE(data); + return stbi__errpuc("outofmem", "Out of memory"); + } + + for (j=0; j < (int) y; ++j) { + unsigned char *src = data + j * x * img_n ; + unsigned char *dest = good + j * x * req_comp; + + #define STBI__COMBO(a,b) ((a)*8+(b)) + #define STBI__CASE(a,b) case STBI__COMBO(a,b): for(i=x-1; i >= 0; --i, src += a, dest += b) + // convert source image with img_n components to one with req_comp components; + // avoid switch per pixel, so use switch per scanline and massive macros + switch (STBI__COMBO(img_n, req_comp)) { + STBI__CASE(1,2) { dest[0]=src[0], dest[1]=255; } break; + STBI__CASE(1,3) { dest[0]=dest[1]=dest[2]=src[0]; } break; + STBI__CASE(1,4) { dest[0]=dest[1]=dest[2]=src[0], dest[3]=255; } break; + STBI__CASE(2,1) { dest[0]=src[0]; } break; + STBI__CASE(2,3) { dest[0]=dest[1]=dest[2]=src[0]; } break; + STBI__CASE(2,4) { dest[0]=dest[1]=dest[2]=src[0], dest[3]=src[1]; } break; + STBI__CASE(3,4) { dest[0]=src[0],dest[1]=src[1],dest[2]=src[2],dest[3]=255; } break; + STBI__CASE(3,1) { dest[0]=stbi__compute_y(src[0],src[1],src[2]); } break; + STBI__CASE(3,2) { dest[0]=stbi__compute_y(src[0],src[1],src[2]), dest[1] = 255; } break; + STBI__CASE(4,1) { dest[0]=stbi__compute_y(src[0],src[1],src[2]); } break; + STBI__CASE(4,2) { dest[0]=stbi__compute_y(src[0],src[1],src[2]), dest[1] = src[3]; } break; + STBI__CASE(4,3) { dest[0]=src[0],dest[1]=src[1],dest[2]=src[2]; } break; + default: STBI_ASSERT(0); + } + #undef STBI__CASE + } + + STBI_FREE(data); + return good; +} + +static stbi__uint16 stbi__compute_y_16(int r, int g, int b) +{ + return (stbi__uint16) (((r*77) + (g*150) + (29*b)) >> 8); +} + +static stbi__uint16 *stbi__convert_format16(stbi__uint16 *data, int img_n, int req_comp, unsigned int x, unsigned int y) +{ + int i,j; + stbi__uint16 *good; + + if (req_comp == img_n) return data; + STBI_ASSERT(req_comp >= 1 && req_comp <= 4); + + good = (stbi__uint16 *) stbi__malloc(req_comp * x * y * 2); + if (good == NULL) { + STBI_FREE(data); + return (stbi__uint16 *) stbi__errpuc("outofmem", "Out of memory"); + } + + for (j=0; j < (int) y; ++j) { + stbi__uint16 *src = data + j * x * img_n ; + stbi__uint16 *dest = good + j * x * req_comp; + + #define STBI__COMBO(a,b) ((a)*8+(b)) + #define STBI__CASE(a,b) case STBI__COMBO(a,b): for(i=x-1; i >= 0; --i, src += a, dest += b) + // convert source image with img_n components to one with req_comp components; + // avoid switch per pixel, so use switch per scanline and massive macros + switch (STBI__COMBO(img_n, req_comp)) { + STBI__CASE(1,2) { dest[0]=src[0], dest[1]=0xffff; } break; + STBI__CASE(1,3) { dest[0]=dest[1]=dest[2]=src[0]; } break; + STBI__CASE(1,4) { dest[0]=dest[1]=dest[2]=src[0], dest[3]=0xffff; } break; + STBI__CASE(2,1) { dest[0]=src[0]; } break; + STBI__CASE(2,3) { dest[0]=dest[1]=dest[2]=src[0]; } break; + STBI__CASE(2,4) { dest[0]=dest[1]=dest[2]=src[0], dest[3]=src[1]; } break; + STBI__CASE(3,4) { dest[0]=src[0],dest[1]=src[1],dest[2]=src[2],dest[3]=0xffff; } break; + STBI__CASE(3,1) { dest[0]=stbi__compute_y_16(src[0],src[1],src[2]); } break; + STBI__CASE(3,2) { dest[0]=stbi__compute_y_16(src[0],src[1],src[2]), dest[1] = 0xffff; } break; + STBI__CASE(4,1) { dest[0]=stbi__compute_y_16(src[0],src[1],src[2]); } break; + STBI__CASE(4,2) { dest[0]=stbi__compute_y_16(src[0],src[1],src[2]), dest[1] = src[3]; } break; + STBI__CASE(4,3) { dest[0]=src[0],dest[1]=src[1],dest[2]=src[2]; } break; + default: STBI_ASSERT(0); + } + #undef STBI__CASE + } + + STBI_FREE(data); + return good; +} + +#ifndef STBI_NO_LINEAR +static float *stbi__ldr_to_hdr(stbi_uc *data, int x, int y, int comp) +{ + int i,k,n; + float *output; + if (!data) return NULL; + output = (float *) stbi__malloc_mad4(x, y, comp, sizeof(float), 0); + if (output == NULL) { STBI_FREE(data); return stbi__errpf("outofmem", "Out of memory"); } + // compute number of non-alpha components + if (comp & 1) n = comp; else n = comp-1; + for (i=0; i < x*y; ++i) { + for (k=0; k < n; ++k) { + output[i*comp + k] = (float) (pow(data[i*comp+k]/255.0f, stbi__l2h_gamma) * stbi__l2h_scale); + } + if (k < comp) output[i*comp + k] = data[i*comp+k]/255.0f; + } + STBI_FREE(data); + return output; +} +#endif + +#ifndef STBI_NO_HDR +#define stbi__float2int(x) ((int) (x)) +static stbi_uc *stbi__hdr_to_ldr(float *data, int x, int y, int comp) +{ + int i,k,n; + stbi_uc *output; + if (!data) return NULL; + output = (stbi_uc *) stbi__malloc_mad3(x, y, comp, 0); + if (output == NULL) { STBI_FREE(data); return stbi__errpuc("outofmem", "Out of memory"); } + // compute number of non-alpha components + if (comp & 1) n = comp; else n = comp-1; + for (i=0; i < x*y; ++i) { + for (k=0; k < n; ++k) { + float z = (float) pow(data[i*comp+k]*stbi__h2l_scale_i, stbi__h2l_gamma_i) * 255 + 0.5f; + if (z < 0) z = 0; + if (z > 255) z = 255; + output[i*comp + k] = (stbi_uc) stbi__float2int(z); + } + if (k < comp) { + float z = data[i*comp+k] * 255 + 0.5f; + if (z < 0) z = 0; + if (z > 255) z = 255; + output[i*comp + k] = (stbi_uc) stbi__float2int(z); + } + } + STBI_FREE(data); + return output; +} +#endif + +////////////////////////////////////////////////////////////////////////////// +// +// "baseline" JPEG/JFIF decoder +// +// simple implementation +// - doesn't support delayed output of y-dimension +// - simple interface (only one output format: 8-bit interleaved RGB) +// - doesn't try to recover corrupt jpegs +// - doesn't allow partial loading, loading multiple at once +// - still fast on x86 (copying globals into locals doesn't help x86) +// - allocates lots of intermediate memory (full size of all components) +// - non-interleaved case requires this anyway +// - allows good upsampling (see next) +// high-quality +// - upsampled channels are bilinearly interpolated, even across blocks +// - quality integer IDCT derived from IJG's 'slow' +// performance +// - fast huffman; reasonable integer IDCT +// - some SIMD kernels for common paths on targets with SSE2/NEON +// - uses a lot of intermediate memory, could cache poorly + +#ifndef STBI_NO_JPEG + +// huffman decoding acceleration +#define FAST_BITS 9 // larger handles more cases; smaller stomps less cache + +typedef struct +{ + stbi_uc fast[1 << FAST_BITS]; + // weirdly, repacking this into AoS is a 10% speed loss, instead of a win + stbi__uint16 code[256]; + stbi_uc values[256]; + stbi_uc size[257]; + unsigned int maxcode[18]; + int delta[17]; // old 'firstsymbol' - old 'firstcode' +} stbi__huffman; + +typedef struct +{ + stbi__context *s; + stbi__huffman huff_dc[4]; + stbi__huffman huff_ac[4]; + stbi__uint16 dequant[4][64]; + stbi__int16 fast_ac[4][1 << FAST_BITS]; + +// sizes for components, interleaved MCUs + int img_h_max, img_v_max; + int img_mcu_x, img_mcu_y; + int img_mcu_w, img_mcu_h; + +// definition of jpeg image component + struct + { + int id; + int h,v; + int tq; + int hd,ha; + int dc_pred; + + int x,y,w2,h2; + stbi_uc *data; + void *raw_data, *raw_coeff; + stbi_uc *linebuf; + short *coeff; // progressive only + int coeff_w, coeff_h; // number of 8x8 coefficient blocks + } img_comp[4]; + + stbi__uint32 code_buffer; // jpeg entropy-coded buffer + int code_bits; // number of valid bits + unsigned char marker; // marker seen while filling entropy buffer + int nomore; // flag if we saw a marker so must stop + + int progressive; + int spec_start; + int spec_end; + int succ_high; + int succ_low; + int eob_run; + int rgb; + + int scan_n, order[4]; + int restart_interval, todo; + +// kernels + void (*idct_block_kernel)(stbi_uc *out, int out_stride, short data[64]); + void (*YCbCr_to_RGB_kernel)(stbi_uc *out, const stbi_uc *y, const stbi_uc *pcb, const stbi_uc *pcr, int count, int step); + stbi_uc *(*resample_row_hv_2_kernel)(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs); +} stbi__jpeg; + +static int stbi__build_huffman(stbi__huffman *h, int *count) +{ + int i,j,k=0,code; + // build size list for each symbol (from JPEG spec) + for (i=0; i < 16; ++i) + for (j=0; j < count[i]; ++j) + h->size[k++] = (stbi_uc) (i+1); + h->size[k] = 0; + + // compute actual symbols (from jpeg spec) + code = 0; + k = 0; + for(j=1; j <= 16; ++j) { + // compute delta to add to code to compute symbol id + h->delta[j] = k - code; + if (h->size[k] == j) { + while (h->size[k] == j) + h->code[k++] = (stbi__uint16) (code++); + if (code-1 >= (1 << j)) return stbi__err("bad code lengths","Corrupt JPEG"); + } + // compute largest code + 1 for this size, preshifted as needed later + h->maxcode[j] = code << (16-j); + code <<= 1; + } + h->maxcode[j] = 0xffffffff; + + // build non-spec acceleration table; 255 is flag for not-accelerated + memset(h->fast, 255, 1 << FAST_BITS); + for (i=0; i < k; ++i) { + int s = h->size[i]; + if (s <= FAST_BITS) { + int c = h->code[i] << (FAST_BITS-s); + int m = 1 << (FAST_BITS-s); + for (j=0; j < m; ++j) { + h->fast[c+j] = (stbi_uc) i; + } + } + } + return 1; +} + +// build a table that decodes both magnitude and value of small ACs in +// one go. +static void stbi__build_fast_ac(stbi__int16 *fast_ac, stbi__huffman *h) +{ + int i; + for (i=0; i < (1 << FAST_BITS); ++i) { + stbi_uc fast = h->fast[i]; + fast_ac[i] = 0; + if (fast < 255) { + int rs = h->values[fast]; + int run = (rs >> 4) & 15; + int magbits = rs & 15; + int len = h->size[fast]; + + if (magbits && len + magbits <= FAST_BITS) { + // magnitude code followed by receive_extend code + int k = ((i << len) & ((1 << FAST_BITS) - 1)) >> (FAST_BITS - magbits); + int m = 1 << (magbits - 1); + if (k < m) k += (-1 << magbits) + 1; + // if the result is small enough, we can fit it in fast_ac table + if (k >= -128 && k <= 127) + fast_ac[i] = (stbi__int16) ((k << 8) + (run << 4) + (len + magbits)); + } + } + } +} + +static void stbi__grow_buffer_unsafe(stbi__jpeg *j) +{ + do { + int b = j->nomore ? 0 : stbi__get8(j->s); + if (b == 0xff) { + int c = stbi__get8(j->s); + while (c == 0xff) c = stbi__get8(j->s); // consume fill bytes + if (c != 0) { + j->marker = (unsigned char) c; + j->nomore = 1; + return; + } + } + j->code_buffer |= b << (24 - j->code_bits); + j->code_bits += 8; + } while (j->code_bits <= 24); +} + +// (1 << n) - 1 +static stbi__uint32 stbi__bmask[17]={0,1,3,7,15,31,63,127,255,511,1023,2047,4095,8191,16383,32767,65535}; + +// decode a jpeg huffman value from the bitstream +stbi_inline static int stbi__jpeg_huff_decode(stbi__jpeg *j, stbi__huffman *h) +{ + unsigned int temp; + int c,k; + + if (j->code_bits < 16) stbi__grow_buffer_unsafe(j); + + // look at the top FAST_BITS and determine what symbol ID it is, + // if the code is <= FAST_BITS + c = (j->code_buffer >> (32 - FAST_BITS)) & ((1 << FAST_BITS)-1); + k = h->fast[c]; + if (k < 255) { + int s = h->size[k]; + if (s > j->code_bits) + return -1; + j->code_buffer <<= s; + j->code_bits -= s; + return h->values[k]; + } + + // naive test is to shift the code_buffer down so k bits are + // valid, then test against maxcode. To speed this up, we've + // preshifted maxcode left so that it has (16-k) 0s at the + // end; in other words, regardless of the number of bits, it + // wants to be compared against something shifted to have 16; + // that way we don't need to shift inside the loop. + temp = j->code_buffer >> 16; + for (k=FAST_BITS+1 ; ; ++k) + if (temp < h->maxcode[k]) + break; + if (k == 17) { + // error! code not found + j->code_bits -= 16; + return -1; + } + + if (k > j->code_bits) + return -1; + + // convert the huffman code to the symbol id + c = ((j->code_buffer >> (32 - k)) & stbi__bmask[k]) + h->delta[k]; + STBI_ASSERT((((j->code_buffer) >> (32 - h->size[c])) & stbi__bmask[h->size[c]]) == h->code[c]); + + // convert the id to a symbol + j->code_bits -= k; + j->code_buffer <<= k; + return h->values[c]; +} + +// bias[n] = (-1<code_bits < n) stbi__grow_buffer_unsafe(j); + + sgn = (stbi__int32)j->code_buffer >> 31; // sign bit is always in MSB + k = stbi_lrot(j->code_buffer, n); + STBI_ASSERT(n >= 0 && n < (int) (sizeof(stbi__bmask)/sizeof(*stbi__bmask))); + j->code_buffer = k & ~stbi__bmask[n]; + k &= stbi__bmask[n]; + j->code_bits -= n; + return k + (stbi__jbias[n] & ~sgn); +} + +// get some unsigned bits +stbi_inline static int stbi__jpeg_get_bits(stbi__jpeg *j, int n) +{ + unsigned int k; + if (j->code_bits < n) stbi__grow_buffer_unsafe(j); + k = stbi_lrot(j->code_buffer, n); + j->code_buffer = k & ~stbi__bmask[n]; + k &= stbi__bmask[n]; + j->code_bits -= n; + return k; +} + +stbi_inline static int stbi__jpeg_get_bit(stbi__jpeg *j) +{ + unsigned int k; + if (j->code_bits < 1) stbi__grow_buffer_unsafe(j); + k = j->code_buffer; + j->code_buffer <<= 1; + --j->code_bits; + return k & 0x80000000; +} + +// given a value that's at position X in the zigzag stream, +// where does it appear in the 8x8 matrix coded as row-major? +static stbi_uc stbi__jpeg_dezigzag[64+15] = +{ + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + // let corrupt input sample past end + 63, 63, 63, 63, 63, 63, 63, 63, + 63, 63, 63, 63, 63, 63, 63 +}; + +// decode one 64-entry block-- +static int stbi__jpeg_decode_block(stbi__jpeg *j, short data[64], stbi__huffman *hdc, stbi__huffman *hac, stbi__int16 *fac, int b, stbi__uint16 *dequant) +{ + int diff,dc,k; + int t; + + if (j->code_bits < 16) stbi__grow_buffer_unsafe(j); + t = stbi__jpeg_huff_decode(j, hdc); + if (t < 0) return stbi__err("bad huffman code","Corrupt JPEG"); + + // 0 all the ac values now so we can do it 32-bits at a time + memset(data,0,64*sizeof(data[0])); + + diff = t ? stbi__extend_receive(j, t) : 0; + dc = j->img_comp[b].dc_pred + diff; + j->img_comp[b].dc_pred = dc; + data[0] = (short) (dc * dequant[0]); + + // decode AC components, see JPEG spec + k = 1; + do { + unsigned int zig; + int c,r,s; + if (j->code_bits < 16) stbi__grow_buffer_unsafe(j); + c = (j->code_buffer >> (32 - FAST_BITS)) & ((1 << FAST_BITS)-1); + r = fac[c]; + if (r) { // fast-AC path + k += (r >> 4) & 15; // run + s = r & 15; // combined length + j->code_buffer <<= s; + j->code_bits -= s; + // decode into unzigzag'd location + zig = stbi__jpeg_dezigzag[k++]; + data[zig] = (short) ((r >> 8) * dequant[zig]); + } else { + int rs = stbi__jpeg_huff_decode(j, hac); + if (rs < 0) return stbi__err("bad huffman code","Corrupt JPEG"); + s = rs & 15; + r = rs >> 4; + if (s == 0) { + if (rs != 0xf0) break; // end block + k += 16; + } else { + k += r; + // decode into unzigzag'd location + zig = stbi__jpeg_dezigzag[k++]; + data[zig] = (short) (stbi__extend_receive(j,s) * dequant[zig]); + } + } + } while (k < 64); + return 1; +} + +static int stbi__jpeg_decode_block_prog_dc(stbi__jpeg *j, short data[64], stbi__huffman *hdc, int b) +{ + int diff,dc; + int t; + if (j->spec_end != 0) return stbi__err("can't merge dc and ac", "Corrupt JPEG"); + + if (j->code_bits < 16) stbi__grow_buffer_unsafe(j); + + if (j->succ_high == 0) { + // first scan for DC coefficient, must be first + memset(data,0,64*sizeof(data[0])); // 0 all the ac values now + t = stbi__jpeg_huff_decode(j, hdc); + diff = t ? stbi__extend_receive(j, t) : 0; + + dc = j->img_comp[b].dc_pred + diff; + j->img_comp[b].dc_pred = dc; + data[0] = (short) (dc << j->succ_low); + } else { + // refinement scan for DC coefficient + if (stbi__jpeg_get_bit(j)) + data[0] += (short) (1 << j->succ_low); + } + return 1; +} + +// @OPTIMIZE: store non-zigzagged during the decode passes, +// and only de-zigzag when dequantizing +static int stbi__jpeg_decode_block_prog_ac(stbi__jpeg *j, short data[64], stbi__huffman *hac, stbi__int16 *fac) +{ + int k; + if (j->spec_start == 0) return stbi__err("can't merge dc and ac", "Corrupt JPEG"); + + if (j->succ_high == 0) { + int shift = j->succ_low; + + if (j->eob_run) { + --j->eob_run; + return 1; + } + + k = j->spec_start; + do { + unsigned int zig; + int c,r,s; + if (j->code_bits < 16) stbi__grow_buffer_unsafe(j); + c = (j->code_buffer >> (32 - FAST_BITS)) & ((1 << FAST_BITS)-1); + r = fac[c]; + if (r) { // fast-AC path + k += (r >> 4) & 15; // run + s = r & 15; // combined length + j->code_buffer <<= s; + j->code_bits -= s; + zig = stbi__jpeg_dezigzag[k++]; + data[zig] = (short) ((r >> 8) << shift); + } else { + int rs = stbi__jpeg_huff_decode(j, hac); + if (rs < 0) return stbi__err("bad huffman code","Corrupt JPEG"); + s = rs & 15; + r = rs >> 4; + if (s == 0) { + if (r < 15) { + j->eob_run = (1 << r); + if (r) + j->eob_run += stbi__jpeg_get_bits(j, r); + --j->eob_run; + break; + } + k += 16; + } else { + k += r; + zig = stbi__jpeg_dezigzag[k++]; + data[zig] = (short) (stbi__extend_receive(j,s) << shift); + } + } + } while (k <= j->spec_end); + } else { + // refinement scan for these AC coefficients + + short bit = (short) (1 << j->succ_low); + + if (j->eob_run) { + --j->eob_run; + for (k = j->spec_start; k <= j->spec_end; ++k) { + short *p = &data[stbi__jpeg_dezigzag[k]]; + if (*p != 0) + if (stbi__jpeg_get_bit(j)) + if ((*p & bit)==0) { + if (*p > 0) + *p += bit; + else + *p -= bit; + } + } + } else { + k = j->spec_start; + do { + int r,s; + int rs = stbi__jpeg_huff_decode(j, hac); // @OPTIMIZE see if we can use the fast path here, advance-by-r is so slow, eh + if (rs < 0) return stbi__err("bad huffman code","Corrupt JPEG"); + s = rs & 15; + r = rs >> 4; + if (s == 0) { + if (r < 15) { + j->eob_run = (1 << r) - 1; + if (r) + j->eob_run += stbi__jpeg_get_bits(j, r); + r = 64; // force end of block + } else { + // r=15 s=0 should write 16 0s, so we just do + // a run of 15 0s and then write s (which is 0), + // so we don't have to do anything special here + } + } else { + if (s != 1) return stbi__err("bad huffman code", "Corrupt JPEG"); + // sign bit + if (stbi__jpeg_get_bit(j)) + s = bit; + else + s = -bit; + } + + // advance by r + while (k <= j->spec_end) { + short *p = &data[stbi__jpeg_dezigzag[k++]]; + if (*p != 0) { + if (stbi__jpeg_get_bit(j)) + if ((*p & bit)==0) { + if (*p > 0) + *p += bit; + else + *p -= bit; + } + } else { + if (r == 0) { + *p = (short) s; + break; + } + --r; + } + } + } while (k <= j->spec_end); + } + } + return 1; +} + +// take a -128..127 value and stbi__clamp it and convert to 0..255 +stbi_inline static stbi_uc stbi__clamp(int x) +{ + // trick to use a single test to catch both cases + if ((unsigned int) x > 255) { + if (x < 0) return 0; + if (x > 255) return 255; + } + return (stbi_uc) x; +} + +#define stbi__f2f(x) ((int) (((x) * 4096 + 0.5))) +#define stbi__fsh(x) ((x) << 12) + +// derived from jidctint -- DCT_ISLOW +#define STBI__IDCT_1D(s0,s1,s2,s3,s4,s5,s6,s7) \ + int t0,t1,t2,t3,p1,p2,p3,p4,p5,x0,x1,x2,x3; \ + p2 = s2; \ + p3 = s6; \ + p1 = (p2+p3) * stbi__f2f(0.5411961f); \ + t2 = p1 + p3*stbi__f2f(-1.847759065f); \ + t3 = p1 + p2*stbi__f2f( 0.765366865f); \ + p2 = s0; \ + p3 = s4; \ + t0 = stbi__fsh(p2+p3); \ + t1 = stbi__fsh(p2-p3); \ + x0 = t0+t3; \ + x3 = t0-t3; \ + x1 = t1+t2; \ + x2 = t1-t2; \ + t0 = s7; \ + t1 = s5; \ + t2 = s3; \ + t3 = s1; \ + p3 = t0+t2; \ + p4 = t1+t3; \ + p1 = t0+t3; \ + p2 = t1+t2; \ + p5 = (p3+p4)*stbi__f2f( 1.175875602f); \ + t0 = t0*stbi__f2f( 0.298631336f); \ + t1 = t1*stbi__f2f( 2.053119869f); \ + t2 = t2*stbi__f2f( 3.072711026f); \ + t3 = t3*stbi__f2f( 1.501321110f); \ + p1 = p5 + p1*stbi__f2f(-0.899976223f); \ + p2 = p5 + p2*stbi__f2f(-2.562915447f); \ + p3 = p3*stbi__f2f(-1.961570560f); \ + p4 = p4*stbi__f2f(-0.390180644f); \ + t3 += p1+p4; \ + t2 += p2+p3; \ + t1 += p2+p4; \ + t0 += p1+p3; + +static void stbi__idct_block(stbi_uc *out, int out_stride, short data[64]) +{ + int i,val[64],*v=val; + stbi_uc *o; + short *d = data; + + // columns + for (i=0; i < 8; ++i,++d, ++v) { + // if all zeroes, shortcut -- this avoids dequantizing 0s and IDCTing + if (d[ 8]==0 && d[16]==0 && d[24]==0 && d[32]==0 + && d[40]==0 && d[48]==0 && d[56]==0) { + // no shortcut 0 seconds + // (1|2|3|4|5|6|7)==0 0 seconds + // all separate -0.047 seconds + // 1 && 2|3 && 4|5 && 6|7: -0.047 seconds + int dcterm = d[0] << 2; + v[0] = v[8] = v[16] = v[24] = v[32] = v[40] = v[48] = v[56] = dcterm; + } else { + STBI__IDCT_1D(d[ 0],d[ 8],d[16],d[24],d[32],d[40],d[48],d[56]) + // constants scaled things up by 1<<12; let's bring them back + // down, but keep 2 extra bits of precision + x0 += 512; x1 += 512; x2 += 512; x3 += 512; + v[ 0] = (x0+t3) >> 10; + v[56] = (x0-t3) >> 10; + v[ 8] = (x1+t2) >> 10; + v[48] = (x1-t2) >> 10; + v[16] = (x2+t1) >> 10; + v[40] = (x2-t1) >> 10; + v[24] = (x3+t0) >> 10; + v[32] = (x3-t0) >> 10; + } + } + + for (i=0, v=val, o=out; i < 8; ++i,v+=8,o+=out_stride) { + // no fast case since the first 1D IDCT spread components out + STBI__IDCT_1D(v[0],v[1],v[2],v[3],v[4],v[5],v[6],v[7]) + // constants scaled things up by 1<<12, plus we had 1<<2 from first + // loop, plus horizontal and vertical each scale by sqrt(8) so together + // we've got an extra 1<<3, so 1<<17 total we need to remove. + // so we want to round that, which means adding 0.5 * 1<<17, + // aka 65536. Also, we'll end up with -128 to 127 that we want + // to encode as 0..255 by adding 128, so we'll add that before the shift + x0 += 65536 + (128<<17); + x1 += 65536 + (128<<17); + x2 += 65536 + (128<<17); + x3 += 65536 + (128<<17); + // tried computing the shifts into temps, or'ing the temps to see + // if any were out of range, but that was slower + o[0] = stbi__clamp((x0+t3) >> 17); + o[7] = stbi__clamp((x0-t3) >> 17); + o[1] = stbi__clamp((x1+t2) >> 17); + o[6] = stbi__clamp((x1-t2) >> 17); + o[2] = stbi__clamp((x2+t1) >> 17); + o[5] = stbi__clamp((x2-t1) >> 17); + o[3] = stbi__clamp((x3+t0) >> 17); + o[4] = stbi__clamp((x3-t0) >> 17); + } +} + +#ifdef STBI_SSE2 +// sse2 integer IDCT. not the fastest possible implementation but it +// produces bit-identical results to the generic C version so it's +// fully "transparent". +static void stbi__idct_simd(stbi_uc *out, int out_stride, short data[64]) +{ + // This is constructed to match our regular (generic) integer IDCT exactly. + __m128i row0, row1, row2, row3, row4, row5, row6, row7; + __m128i tmp; + + // dot product constant: even elems=x, odd elems=y + #define dct_const(x,y) _mm_setr_epi16((x),(y),(x),(y),(x),(y),(x),(y)) + + // out(0) = c0[even]*x + c0[odd]*y (c0, x, y 16-bit, out 32-bit) + // out(1) = c1[even]*x + c1[odd]*y + #define dct_rot(out0,out1, x,y,c0,c1) \ + __m128i c0##lo = _mm_unpacklo_epi16((x),(y)); \ + __m128i c0##hi = _mm_unpackhi_epi16((x),(y)); \ + __m128i out0##_l = _mm_madd_epi16(c0##lo, c0); \ + __m128i out0##_h = _mm_madd_epi16(c0##hi, c0); \ + __m128i out1##_l = _mm_madd_epi16(c0##lo, c1); \ + __m128i out1##_h = _mm_madd_epi16(c0##hi, c1) + + // out = in << 12 (in 16-bit, out 32-bit) + #define dct_widen(out, in) \ + __m128i out##_l = _mm_srai_epi32(_mm_unpacklo_epi16(_mm_setzero_si128(), (in)), 4); \ + __m128i out##_h = _mm_srai_epi32(_mm_unpackhi_epi16(_mm_setzero_si128(), (in)), 4) + + // wide add + #define dct_wadd(out, a, b) \ + __m128i out##_l = _mm_add_epi32(a##_l, b##_l); \ + __m128i out##_h = _mm_add_epi32(a##_h, b##_h) + + // wide sub + #define dct_wsub(out, a, b) \ + __m128i out##_l = _mm_sub_epi32(a##_l, b##_l); \ + __m128i out##_h = _mm_sub_epi32(a##_h, b##_h) + + // butterfly a/b, add bias, then shift by "s" and pack + #define dct_bfly32o(out0, out1, a,b,bias,s) \ + { \ + __m128i abiased_l = _mm_add_epi32(a##_l, bias); \ + __m128i abiased_h = _mm_add_epi32(a##_h, bias); \ + dct_wadd(sum, abiased, b); \ + dct_wsub(dif, abiased, b); \ + out0 = _mm_packs_epi32(_mm_srai_epi32(sum_l, s), _mm_srai_epi32(sum_h, s)); \ + out1 = _mm_packs_epi32(_mm_srai_epi32(dif_l, s), _mm_srai_epi32(dif_h, s)); \ + } + + // 8-bit interleave step (for transposes) + #define dct_interleave8(a, b) \ + tmp = a; \ + a = _mm_unpacklo_epi8(a, b); \ + b = _mm_unpackhi_epi8(tmp, b) + + // 16-bit interleave step (for transposes) + #define dct_interleave16(a, b) \ + tmp = a; \ + a = _mm_unpacklo_epi16(a, b); \ + b = _mm_unpackhi_epi16(tmp, b) + + #define dct_pass(bias,shift) \ + { \ + /* even part */ \ + dct_rot(t2e,t3e, row2,row6, rot0_0,rot0_1); \ + __m128i sum04 = _mm_add_epi16(row0, row4); \ + __m128i dif04 = _mm_sub_epi16(row0, row4); \ + dct_widen(t0e, sum04); \ + dct_widen(t1e, dif04); \ + dct_wadd(x0, t0e, t3e); \ + dct_wsub(x3, t0e, t3e); \ + dct_wadd(x1, t1e, t2e); \ + dct_wsub(x2, t1e, t2e); \ + /* odd part */ \ + dct_rot(y0o,y2o, row7,row3, rot2_0,rot2_1); \ + dct_rot(y1o,y3o, row5,row1, rot3_0,rot3_1); \ + __m128i sum17 = _mm_add_epi16(row1, row7); \ + __m128i sum35 = _mm_add_epi16(row3, row5); \ + dct_rot(y4o,y5o, sum17,sum35, rot1_0,rot1_1); \ + dct_wadd(x4, y0o, y4o); \ + dct_wadd(x5, y1o, y5o); \ + dct_wadd(x6, y2o, y5o); \ + dct_wadd(x7, y3o, y4o); \ + dct_bfly32o(row0,row7, x0,x7,bias,shift); \ + dct_bfly32o(row1,row6, x1,x6,bias,shift); \ + dct_bfly32o(row2,row5, x2,x5,bias,shift); \ + dct_bfly32o(row3,row4, x3,x4,bias,shift); \ + } + + __m128i rot0_0 = dct_const(stbi__f2f(0.5411961f), stbi__f2f(0.5411961f) + stbi__f2f(-1.847759065f)); + __m128i rot0_1 = dct_const(stbi__f2f(0.5411961f) + stbi__f2f( 0.765366865f), stbi__f2f(0.5411961f)); + __m128i rot1_0 = dct_const(stbi__f2f(1.175875602f) + stbi__f2f(-0.899976223f), stbi__f2f(1.175875602f)); + __m128i rot1_1 = dct_const(stbi__f2f(1.175875602f), stbi__f2f(1.175875602f) + stbi__f2f(-2.562915447f)); + __m128i rot2_0 = dct_const(stbi__f2f(-1.961570560f) + stbi__f2f( 0.298631336f), stbi__f2f(-1.961570560f)); + __m128i rot2_1 = dct_const(stbi__f2f(-1.961570560f), stbi__f2f(-1.961570560f) + stbi__f2f( 3.072711026f)); + __m128i rot3_0 = dct_const(stbi__f2f(-0.390180644f) + stbi__f2f( 2.053119869f), stbi__f2f(-0.390180644f)); + __m128i rot3_1 = dct_const(stbi__f2f(-0.390180644f), stbi__f2f(-0.390180644f) + stbi__f2f( 1.501321110f)); + + // rounding biases in column/row passes, see stbi__idct_block for explanation. + __m128i bias_0 = _mm_set1_epi32(512); + __m128i bias_1 = _mm_set1_epi32(65536 + (128<<17)); + + // load + row0 = _mm_load_si128((const __m128i *) (data + 0*8)); + row1 = _mm_load_si128((const __m128i *) (data + 1*8)); + row2 = _mm_load_si128((const __m128i *) (data + 2*8)); + row3 = _mm_load_si128((const __m128i *) (data + 3*8)); + row4 = _mm_load_si128((const __m128i *) (data + 4*8)); + row5 = _mm_load_si128((const __m128i *) (data + 5*8)); + row6 = _mm_load_si128((const __m128i *) (data + 6*8)); + row7 = _mm_load_si128((const __m128i *) (data + 7*8)); + + // column pass + dct_pass(bias_0, 10); + + { + // 16bit 8x8 transpose pass 1 + dct_interleave16(row0, row4); + dct_interleave16(row1, row5); + dct_interleave16(row2, row6); + dct_interleave16(row3, row7); + + // transpose pass 2 + dct_interleave16(row0, row2); + dct_interleave16(row1, row3); + dct_interleave16(row4, row6); + dct_interleave16(row5, row7); + + // transpose pass 3 + dct_interleave16(row0, row1); + dct_interleave16(row2, row3); + dct_interleave16(row4, row5); + dct_interleave16(row6, row7); + } + + // row pass + dct_pass(bias_1, 17); + + { + // pack + __m128i p0 = _mm_packus_epi16(row0, row1); // a0a1a2a3...a7b0b1b2b3...b7 + __m128i p1 = _mm_packus_epi16(row2, row3); + __m128i p2 = _mm_packus_epi16(row4, row5); + __m128i p3 = _mm_packus_epi16(row6, row7); + + // 8bit 8x8 transpose pass 1 + dct_interleave8(p0, p2); // a0e0a1e1... + dct_interleave8(p1, p3); // c0g0c1g1... + + // transpose pass 2 + dct_interleave8(p0, p1); // a0c0e0g0... + dct_interleave8(p2, p3); // b0d0f0h0... + + // transpose pass 3 + dct_interleave8(p0, p2); // a0b0c0d0... + dct_interleave8(p1, p3); // a4b4c4d4... + + // store + _mm_storel_epi64((__m128i *) out, p0); out += out_stride; + _mm_storel_epi64((__m128i *) out, _mm_shuffle_epi32(p0, 0x4e)); out += out_stride; + _mm_storel_epi64((__m128i *) out, p2); out += out_stride; + _mm_storel_epi64((__m128i *) out, _mm_shuffle_epi32(p2, 0x4e)); out += out_stride; + _mm_storel_epi64((__m128i *) out, p1); out += out_stride; + _mm_storel_epi64((__m128i *) out, _mm_shuffle_epi32(p1, 0x4e)); out += out_stride; + _mm_storel_epi64((__m128i *) out, p3); out += out_stride; + _mm_storel_epi64((__m128i *) out, _mm_shuffle_epi32(p3, 0x4e)); + } + +#undef dct_const +#undef dct_rot +#undef dct_widen +#undef dct_wadd +#undef dct_wsub +#undef dct_bfly32o +#undef dct_interleave8 +#undef dct_interleave16 +#undef dct_pass +} + +#endif // STBI_SSE2 + +#ifdef STBI_NEON + +// NEON integer IDCT. should produce bit-identical +// results to the generic C version. +static void stbi__idct_simd(stbi_uc *out, int out_stride, short data[64]) +{ + int16x8_t row0, row1, row2, row3, row4, row5, row6, row7; + + int16x4_t rot0_0 = vdup_n_s16(stbi__f2f(0.5411961f)); + int16x4_t rot0_1 = vdup_n_s16(stbi__f2f(-1.847759065f)); + int16x4_t rot0_2 = vdup_n_s16(stbi__f2f( 0.765366865f)); + int16x4_t rot1_0 = vdup_n_s16(stbi__f2f( 1.175875602f)); + int16x4_t rot1_1 = vdup_n_s16(stbi__f2f(-0.899976223f)); + int16x4_t rot1_2 = vdup_n_s16(stbi__f2f(-2.562915447f)); + int16x4_t rot2_0 = vdup_n_s16(stbi__f2f(-1.961570560f)); + int16x4_t rot2_1 = vdup_n_s16(stbi__f2f(-0.390180644f)); + int16x4_t rot3_0 = vdup_n_s16(stbi__f2f( 0.298631336f)); + int16x4_t rot3_1 = vdup_n_s16(stbi__f2f( 2.053119869f)); + int16x4_t rot3_2 = vdup_n_s16(stbi__f2f( 3.072711026f)); + int16x4_t rot3_3 = vdup_n_s16(stbi__f2f( 1.501321110f)); + +#define dct_long_mul(out, inq, coeff) \ + int32x4_t out##_l = vmull_s16(vget_low_s16(inq), coeff); \ + int32x4_t out##_h = vmull_s16(vget_high_s16(inq), coeff) + +#define dct_long_mac(out, acc, inq, coeff) \ + int32x4_t out##_l = vmlal_s16(acc##_l, vget_low_s16(inq), coeff); \ + int32x4_t out##_h = vmlal_s16(acc##_h, vget_high_s16(inq), coeff) + +#define dct_widen(out, inq) \ + int32x4_t out##_l = vshll_n_s16(vget_low_s16(inq), 12); \ + int32x4_t out##_h = vshll_n_s16(vget_high_s16(inq), 12) + +// wide add +#define dct_wadd(out, a, b) \ + int32x4_t out##_l = vaddq_s32(a##_l, b##_l); \ + int32x4_t out##_h = vaddq_s32(a##_h, b##_h) + +// wide sub +#define dct_wsub(out, a, b) \ + int32x4_t out##_l = vsubq_s32(a##_l, b##_l); \ + int32x4_t out##_h = vsubq_s32(a##_h, b##_h) + +// butterfly a/b, then shift using "shiftop" by "s" and pack +#define dct_bfly32o(out0,out1, a,b,shiftop,s) \ + { \ + dct_wadd(sum, a, b); \ + dct_wsub(dif, a, b); \ + out0 = vcombine_s16(shiftop(sum_l, s), shiftop(sum_h, s)); \ + out1 = vcombine_s16(shiftop(dif_l, s), shiftop(dif_h, s)); \ + } + +#define dct_pass(shiftop, shift) \ + { \ + /* even part */ \ + int16x8_t sum26 = vaddq_s16(row2, row6); \ + dct_long_mul(p1e, sum26, rot0_0); \ + dct_long_mac(t2e, p1e, row6, rot0_1); \ + dct_long_mac(t3e, p1e, row2, rot0_2); \ + int16x8_t sum04 = vaddq_s16(row0, row4); \ + int16x8_t dif04 = vsubq_s16(row0, row4); \ + dct_widen(t0e, sum04); \ + dct_widen(t1e, dif04); \ + dct_wadd(x0, t0e, t3e); \ + dct_wsub(x3, t0e, t3e); \ + dct_wadd(x1, t1e, t2e); \ + dct_wsub(x2, t1e, t2e); \ + /* odd part */ \ + int16x8_t sum15 = vaddq_s16(row1, row5); \ + int16x8_t sum17 = vaddq_s16(row1, row7); \ + int16x8_t sum35 = vaddq_s16(row3, row5); \ + int16x8_t sum37 = vaddq_s16(row3, row7); \ + int16x8_t sumodd = vaddq_s16(sum17, sum35); \ + dct_long_mul(p5o, sumodd, rot1_0); \ + dct_long_mac(p1o, p5o, sum17, rot1_1); \ + dct_long_mac(p2o, p5o, sum35, rot1_2); \ + dct_long_mul(p3o, sum37, rot2_0); \ + dct_long_mul(p4o, sum15, rot2_1); \ + dct_wadd(sump13o, p1o, p3o); \ + dct_wadd(sump24o, p2o, p4o); \ + dct_wadd(sump23o, p2o, p3o); \ + dct_wadd(sump14o, p1o, p4o); \ + dct_long_mac(x4, sump13o, row7, rot3_0); \ + dct_long_mac(x5, sump24o, row5, rot3_1); \ + dct_long_mac(x6, sump23o, row3, rot3_2); \ + dct_long_mac(x7, sump14o, row1, rot3_3); \ + dct_bfly32o(row0,row7, x0,x7,shiftop,shift); \ + dct_bfly32o(row1,row6, x1,x6,shiftop,shift); \ + dct_bfly32o(row2,row5, x2,x5,shiftop,shift); \ + dct_bfly32o(row3,row4, x3,x4,shiftop,shift); \ + } + + // load + row0 = vld1q_s16(data + 0*8); + row1 = vld1q_s16(data + 1*8); + row2 = vld1q_s16(data + 2*8); + row3 = vld1q_s16(data + 3*8); + row4 = vld1q_s16(data + 4*8); + row5 = vld1q_s16(data + 5*8); + row6 = vld1q_s16(data + 6*8); + row7 = vld1q_s16(data + 7*8); + + // add DC bias + row0 = vaddq_s16(row0, vsetq_lane_s16(1024, vdupq_n_s16(0), 0)); + + // column pass + dct_pass(vrshrn_n_s32, 10); + + // 16bit 8x8 transpose + { +// these three map to a single VTRN.16, VTRN.32, and VSWP, respectively. +// whether compilers actually get this is another story, sadly. +#define dct_trn16(x, y) { int16x8x2_t t = vtrnq_s16(x, y); x = t.val[0]; y = t.val[1]; } +#define dct_trn32(x, y) { int32x4x2_t t = vtrnq_s32(vreinterpretq_s32_s16(x), vreinterpretq_s32_s16(y)); x = vreinterpretq_s16_s32(t.val[0]); y = vreinterpretq_s16_s32(t.val[1]); } +#define dct_trn64(x, y) { int16x8_t x0 = x; int16x8_t y0 = y; x = vcombine_s16(vget_low_s16(x0), vget_low_s16(y0)); y = vcombine_s16(vget_high_s16(x0), vget_high_s16(y0)); } + + // pass 1 + dct_trn16(row0, row1); // a0b0a2b2a4b4a6b6 + dct_trn16(row2, row3); + dct_trn16(row4, row5); + dct_trn16(row6, row7); + + // pass 2 + dct_trn32(row0, row2); // a0b0c0d0a4b4c4d4 + dct_trn32(row1, row3); + dct_trn32(row4, row6); + dct_trn32(row5, row7); + + // pass 3 + dct_trn64(row0, row4); // a0b0c0d0e0f0g0h0 + dct_trn64(row1, row5); + dct_trn64(row2, row6); + dct_trn64(row3, row7); + +#undef dct_trn16 +#undef dct_trn32 +#undef dct_trn64 + } + + // row pass + // vrshrn_n_s32 only supports shifts up to 16, we need + // 17. so do a non-rounding shift of 16 first then follow + // up with a rounding shift by 1. + dct_pass(vshrn_n_s32, 16); + + { + // pack and round + uint8x8_t p0 = vqrshrun_n_s16(row0, 1); + uint8x8_t p1 = vqrshrun_n_s16(row1, 1); + uint8x8_t p2 = vqrshrun_n_s16(row2, 1); + uint8x8_t p3 = vqrshrun_n_s16(row3, 1); + uint8x8_t p4 = vqrshrun_n_s16(row4, 1); + uint8x8_t p5 = vqrshrun_n_s16(row5, 1); + uint8x8_t p6 = vqrshrun_n_s16(row6, 1); + uint8x8_t p7 = vqrshrun_n_s16(row7, 1); + + // again, these can translate into one instruction, but often don't. +#define dct_trn8_8(x, y) { uint8x8x2_t t = vtrn_u8(x, y); x = t.val[0]; y = t.val[1]; } +#define dct_trn8_16(x, y) { uint16x4x2_t t = vtrn_u16(vreinterpret_u16_u8(x), vreinterpret_u16_u8(y)); x = vreinterpret_u8_u16(t.val[0]); y = vreinterpret_u8_u16(t.val[1]); } +#define dct_trn8_32(x, y) { uint32x2x2_t t = vtrn_u32(vreinterpret_u32_u8(x), vreinterpret_u32_u8(y)); x = vreinterpret_u8_u32(t.val[0]); y = vreinterpret_u8_u32(t.val[1]); } + + // sadly can't use interleaved stores here since we only write + // 8 bytes to each scan line! + + // 8x8 8-bit transpose pass 1 + dct_trn8_8(p0, p1); + dct_trn8_8(p2, p3); + dct_trn8_8(p4, p5); + dct_trn8_8(p6, p7); + + // pass 2 + dct_trn8_16(p0, p2); + dct_trn8_16(p1, p3); + dct_trn8_16(p4, p6); + dct_trn8_16(p5, p7); + + // pass 3 + dct_trn8_32(p0, p4); + dct_trn8_32(p1, p5); + dct_trn8_32(p2, p6); + dct_trn8_32(p3, p7); + + // store + vst1_u8(out, p0); out += out_stride; + vst1_u8(out, p1); out += out_stride; + vst1_u8(out, p2); out += out_stride; + vst1_u8(out, p3); out += out_stride; + vst1_u8(out, p4); out += out_stride; + vst1_u8(out, p5); out += out_stride; + vst1_u8(out, p6); out += out_stride; + vst1_u8(out, p7); + +#undef dct_trn8_8 +#undef dct_trn8_16 +#undef dct_trn8_32 + } + +#undef dct_long_mul +#undef dct_long_mac +#undef dct_widen +#undef dct_wadd +#undef dct_wsub +#undef dct_bfly32o +#undef dct_pass +} + +#endif // STBI_NEON + +#define STBI__MARKER_none 0xff +// if there's a pending marker from the entropy stream, return that +// otherwise, fetch from the stream and get a marker. if there's no +// marker, return 0xff, which is never a valid marker value +static stbi_uc stbi__get_marker(stbi__jpeg *j) +{ + stbi_uc x; + if (j->marker != STBI__MARKER_none) { x = j->marker; j->marker = STBI__MARKER_none; return x; } + x = stbi__get8(j->s); + if (x != 0xff) return STBI__MARKER_none; + while (x == 0xff) + x = stbi__get8(j->s); // consume repeated 0xff fill bytes + return x; +} + +// in each scan, we'll have scan_n components, and the order +// of the components is specified by order[] +#define STBI__RESTART(x) ((x) >= 0xd0 && (x) <= 0xd7) + +// after a restart interval, stbi__jpeg_reset the entropy decoder and +// the dc prediction +static void stbi__jpeg_reset(stbi__jpeg *j) +{ + j->code_bits = 0; + j->code_buffer = 0; + j->nomore = 0; + j->img_comp[0].dc_pred = j->img_comp[1].dc_pred = j->img_comp[2].dc_pred = 0; + j->marker = STBI__MARKER_none; + j->todo = j->restart_interval ? j->restart_interval : 0x7fffffff; + j->eob_run = 0; + // no more than 1<<31 MCUs if no restart_interal? that's plenty safe, + // since we don't even allow 1<<30 pixels +} + +static int stbi__parse_entropy_coded_data(stbi__jpeg *z) +{ + stbi__jpeg_reset(z); + if (!z->progressive) { + if (z->scan_n == 1) { + int i,j; + STBI_SIMD_ALIGN(short, data[64]); + int n = z->order[0]; + // non-interleaved data, we just need to process one block at a time, + // in trivial scanline order + // number of blocks to do just depends on how many actual "pixels" this + // component has, independent of interleaved MCU blocking and such + int w = (z->img_comp[n].x+7) >> 3; + int h = (z->img_comp[n].y+7) >> 3; + for (j=0; j < h; ++j) { + for (i=0; i < w; ++i) { + int ha = z->img_comp[n].ha; + if (!stbi__jpeg_decode_block(z, data, z->huff_dc+z->img_comp[n].hd, z->huff_ac+ha, z->fast_ac[ha], n, z->dequant[z->img_comp[n].tq])) return 0; + z->idct_block_kernel(z->img_comp[n].data+z->img_comp[n].w2*j*8+i*8, z->img_comp[n].w2, data); + // every data block is an MCU, so countdown the restart interval + if (--z->todo <= 0) { + if (z->code_bits < 24) stbi__grow_buffer_unsafe(z); + // if it's NOT a restart, then just bail, so we get corrupt data + // rather than no data + if (!STBI__RESTART(z->marker)) return 1; + stbi__jpeg_reset(z); + } + } + } + return 1; + } else { // interleaved + int i,j,k,x,y; + STBI_SIMD_ALIGN(short, data[64]); + for (j=0; j < z->img_mcu_y; ++j) { + for (i=0; i < z->img_mcu_x; ++i) { + // scan an interleaved mcu... process scan_n components in order + for (k=0; k < z->scan_n; ++k) { + int n = z->order[k]; + // scan out an mcu's worth of this component; that's just determined + // by the basic H and V specified for the component + for (y=0; y < z->img_comp[n].v; ++y) { + for (x=0; x < z->img_comp[n].h; ++x) { + int x2 = (i*z->img_comp[n].h + x)*8; + int y2 = (j*z->img_comp[n].v + y)*8; + int ha = z->img_comp[n].ha; + if (!stbi__jpeg_decode_block(z, data, z->huff_dc+z->img_comp[n].hd, z->huff_ac+ha, z->fast_ac[ha], n, z->dequant[z->img_comp[n].tq])) return 0; + z->idct_block_kernel(z->img_comp[n].data+z->img_comp[n].w2*y2+x2, z->img_comp[n].w2, data); + } + } + } + // after all interleaved components, that's an interleaved MCU, + // so now count down the restart interval + if (--z->todo <= 0) { + if (z->code_bits < 24) stbi__grow_buffer_unsafe(z); + if (!STBI__RESTART(z->marker)) return 1; + stbi__jpeg_reset(z); + } + } + } + return 1; + } + } else { + if (z->scan_n == 1) { + int i,j; + int n = z->order[0]; + // non-interleaved data, we just need to process one block at a time, + // in trivial scanline order + // number of blocks to do just depends on how many actual "pixels" this + // component has, independent of interleaved MCU blocking and such + int w = (z->img_comp[n].x+7) >> 3; + int h = (z->img_comp[n].y+7) >> 3; + for (j=0; j < h; ++j) { + for (i=0; i < w; ++i) { + short *data = z->img_comp[n].coeff + 64 * (i + j * z->img_comp[n].coeff_w); + if (z->spec_start == 0) { + if (!stbi__jpeg_decode_block_prog_dc(z, data, &z->huff_dc[z->img_comp[n].hd], n)) + return 0; + } else { + int ha = z->img_comp[n].ha; + if (!stbi__jpeg_decode_block_prog_ac(z, data, &z->huff_ac[ha], z->fast_ac[ha])) + return 0; + } + // every data block is an MCU, so countdown the restart interval + if (--z->todo <= 0) { + if (z->code_bits < 24) stbi__grow_buffer_unsafe(z); + if (!STBI__RESTART(z->marker)) return 1; + stbi__jpeg_reset(z); + } + } + } + return 1; + } else { // interleaved + int i,j,k,x,y; + for (j=0; j < z->img_mcu_y; ++j) { + for (i=0; i < z->img_mcu_x; ++i) { + // scan an interleaved mcu... process scan_n components in order + for (k=0; k < z->scan_n; ++k) { + int n = z->order[k]; + // scan out an mcu's worth of this component; that's just determined + // by the basic H and V specified for the component + for (y=0; y < z->img_comp[n].v; ++y) { + for (x=0; x < z->img_comp[n].h; ++x) { + int x2 = (i*z->img_comp[n].h + x); + int y2 = (j*z->img_comp[n].v + y); + short *data = z->img_comp[n].coeff + 64 * (x2 + y2 * z->img_comp[n].coeff_w); + if (!stbi__jpeg_decode_block_prog_dc(z, data, &z->huff_dc[z->img_comp[n].hd], n)) + return 0; + } + } + } + // after all interleaved components, that's an interleaved MCU, + // so now count down the restart interval + if (--z->todo <= 0) { + if (z->code_bits < 24) stbi__grow_buffer_unsafe(z); + if (!STBI__RESTART(z->marker)) return 1; + stbi__jpeg_reset(z); + } + } + } + return 1; + } + } +} + +static void stbi__jpeg_dequantize(short *data, stbi__uint16 *dequant) +{ + int i; + for (i=0; i < 64; ++i) + data[i] *= dequant[i]; +} + +static void stbi__jpeg_finish(stbi__jpeg *z) +{ + if (z->progressive) { + // dequantize and idct the data + int i,j,n; + for (n=0; n < z->s->img_n; ++n) { + int w = (z->img_comp[n].x+7) >> 3; + int h = (z->img_comp[n].y+7) >> 3; + for (j=0; j < h; ++j) { + for (i=0; i < w; ++i) { + short *data = z->img_comp[n].coeff + 64 * (i + j * z->img_comp[n].coeff_w); + stbi__jpeg_dequantize(data, z->dequant[z->img_comp[n].tq]); + z->idct_block_kernel(z->img_comp[n].data+z->img_comp[n].w2*j*8+i*8, z->img_comp[n].w2, data); + } + } + } + } +} + +static int stbi__process_marker(stbi__jpeg *z, int m) +{ + int L; + switch (m) { + case STBI__MARKER_none: // no marker found + return stbi__err("expected marker","Corrupt JPEG"); + + case 0xDD: // DRI - specify restart interval + if (stbi__get16be(z->s) != 4) return stbi__err("bad DRI len","Corrupt JPEG"); + z->restart_interval = stbi__get16be(z->s); + return 1; + + case 0xDB: // DQT - define quantization table + L = stbi__get16be(z->s)-2; + while (L > 0) { + int q = stbi__get8(z->s); + int p = q >> 4, sixteen = (p != 0); + int t = q & 15,i; + if (p != 0 && p != 1) return stbi__err("bad DQT type","Corrupt JPEG"); + if (t > 3) return stbi__err("bad DQT table","Corrupt JPEG"); + + for (i=0; i < 64; ++i) + z->dequant[t][stbi__jpeg_dezigzag[i]] = sixteen ? stbi__get16be(z->s) : stbi__get8(z->s); + L -= (sixteen ? 129 : 65); + } + return L==0; + + case 0xC4: // DHT - define huffman table + L = stbi__get16be(z->s)-2; + while (L > 0) { + stbi_uc *v; + int sizes[16],i,n=0; + int q = stbi__get8(z->s); + int tc = q >> 4; + int th = q & 15; + if (tc > 1 || th > 3) return stbi__err("bad DHT header","Corrupt JPEG"); + for (i=0; i < 16; ++i) { + sizes[i] = stbi__get8(z->s); + n += sizes[i]; + } + L -= 17; + if (tc == 0) { + if (!stbi__build_huffman(z->huff_dc+th, sizes)) return 0; + v = z->huff_dc[th].values; + } else { + if (!stbi__build_huffman(z->huff_ac+th, sizes)) return 0; + v = z->huff_ac[th].values; + } + for (i=0; i < n; ++i) + v[i] = stbi__get8(z->s); + if (tc != 0) + stbi__build_fast_ac(z->fast_ac[th], z->huff_ac + th); + L -= n; + } + return L==0; + } + // check for comment block or APP blocks + if ((m >= 0xE0 && m <= 0xEF) || m == 0xFE) { + stbi__skip(z->s, stbi__get16be(z->s)-2); + return 1; + } + return stbi__err("unknown marker","Corrupt JPEG"); +} + +// after we see SOS +static int stbi__process_scan_header(stbi__jpeg *z) +{ + int i; + int Ls = stbi__get16be(z->s); + z->scan_n = stbi__get8(z->s); + if (z->scan_n < 1 || z->scan_n > 4 || z->scan_n > (int) z->s->img_n) return stbi__err("bad SOS component count","Corrupt JPEG"); + if (Ls != 6+2*z->scan_n) return stbi__err("bad SOS len","Corrupt JPEG"); + for (i=0; i < z->scan_n; ++i) { + int id = stbi__get8(z->s), which; + int q = stbi__get8(z->s); + for (which = 0; which < z->s->img_n; ++which) + if (z->img_comp[which].id == id) + break; + if (which == z->s->img_n) return 0; // no match + z->img_comp[which].hd = q >> 4; if (z->img_comp[which].hd > 3) return stbi__err("bad DC huff","Corrupt JPEG"); + z->img_comp[which].ha = q & 15; if (z->img_comp[which].ha > 3) return stbi__err("bad AC huff","Corrupt JPEG"); + z->order[i] = which; + } + + { + int aa; + z->spec_start = stbi__get8(z->s); + z->spec_end = stbi__get8(z->s); // should be 63, but might be 0 + aa = stbi__get8(z->s); + z->succ_high = (aa >> 4); + z->succ_low = (aa & 15); + if (z->progressive) { + if (z->spec_start > 63 || z->spec_end > 63 || z->spec_start > z->spec_end || z->succ_high > 13 || z->succ_low > 13) + return stbi__err("bad SOS", "Corrupt JPEG"); + } else { + if (z->spec_start != 0) return stbi__err("bad SOS","Corrupt JPEG"); + if (z->succ_high != 0 || z->succ_low != 0) return stbi__err("bad SOS","Corrupt JPEG"); + z->spec_end = 63; + } + } + + return 1; +} + +static int stbi__free_jpeg_components(stbi__jpeg *z, int ncomp, int why) +{ + int i; + for (i=0; i < ncomp; ++i) { + if (z->img_comp[i].raw_data) { + STBI_FREE(z->img_comp[i].raw_data); + z->img_comp[i].raw_data = NULL; + z->img_comp[i].data = NULL; + } + if (z->img_comp[i].raw_coeff) { + STBI_FREE(z->img_comp[i].raw_coeff); + z->img_comp[i].raw_coeff = 0; + z->img_comp[i].coeff = 0; + } + if (z->img_comp[i].linebuf) { + STBI_FREE(z->img_comp[i].linebuf); + z->img_comp[i].linebuf = NULL; + } + } + return why; +} + +static int stbi__process_frame_header(stbi__jpeg *z, int scan) +{ + stbi__context *s = z->s; + int Lf,p,i,q, h_max=1,v_max=1,c; + Lf = stbi__get16be(s); if (Lf < 11) return stbi__err("bad SOF len","Corrupt JPEG"); // JPEG + p = stbi__get8(s); if (p != 8) return stbi__err("only 8-bit","JPEG format not supported: 8-bit only"); // JPEG baseline + s->img_y = stbi__get16be(s); if (s->img_y == 0) return stbi__err("no header height", "JPEG format not supported: delayed height"); // Legal, but we don't handle it--but neither does IJG + s->img_x = stbi__get16be(s); if (s->img_x == 0) return stbi__err("0 width","Corrupt JPEG"); // JPEG requires + c = stbi__get8(s); + if (c != 3 && c != 1) return stbi__err("bad component count","Corrupt JPEG"); // JFIF requires + s->img_n = c; + for (i=0; i < c; ++i) { + z->img_comp[i].data = NULL; + z->img_comp[i].linebuf = NULL; + } + + if (Lf != 8+3*s->img_n) return stbi__err("bad SOF len","Corrupt JPEG"); + + z->rgb = 0; + for (i=0; i < s->img_n; ++i) { + static unsigned char rgb[3] = { 'R', 'G', 'B' }; + z->img_comp[i].id = stbi__get8(s); + if (z->img_comp[i].id == rgb[i]) + ++z->rgb; + q = stbi__get8(s); + z->img_comp[i].h = (q >> 4); if (!z->img_comp[i].h || z->img_comp[i].h > 4) return stbi__err("bad H","Corrupt JPEG"); + z->img_comp[i].v = q & 15; if (!z->img_comp[i].v || z->img_comp[i].v > 4) return stbi__err("bad V","Corrupt JPEG"); + z->img_comp[i].tq = stbi__get8(s); if (z->img_comp[i].tq > 3) return stbi__err("bad TQ","Corrupt JPEG"); + } + + if (scan != STBI__SCAN_load) return 1; + + if (!stbi__mad3sizes_valid(s->img_x, s->img_y, s->img_n, 0)) return stbi__err("too large", "Image too large to decode"); + + for (i=0; i < s->img_n; ++i) { + if (z->img_comp[i].h > h_max) h_max = z->img_comp[i].h; + if (z->img_comp[i].v > v_max) v_max = z->img_comp[i].v; + } + + // compute interleaved mcu info + z->img_h_max = h_max; + z->img_v_max = v_max; + z->img_mcu_w = h_max * 8; + z->img_mcu_h = v_max * 8; + // these sizes can't be more than 17 bits + z->img_mcu_x = (s->img_x + z->img_mcu_w-1) / z->img_mcu_w; + z->img_mcu_y = (s->img_y + z->img_mcu_h-1) / z->img_mcu_h; + + for (i=0; i < s->img_n; ++i) { + // number of effective pixels (e.g. for non-interleaved MCU) + z->img_comp[i].x = (s->img_x * z->img_comp[i].h + h_max-1) / h_max; + z->img_comp[i].y = (s->img_y * z->img_comp[i].v + v_max-1) / v_max; + // to simplify generation, we'll allocate enough memory to decode + // the bogus oversized data from using interleaved MCUs and their + // big blocks (e.g. a 16x16 iMCU on an image of width 33); we won't + // discard the extra data until colorspace conversion + // + // img_mcu_x, img_mcu_y: <=17 bits; comp[i].h and .v are <=4 (checked earlier) + // so these muls can't overflow with 32-bit ints (which we require) + z->img_comp[i].w2 = z->img_mcu_x * z->img_comp[i].h * 8; + z->img_comp[i].h2 = z->img_mcu_y * z->img_comp[i].v * 8; + z->img_comp[i].coeff = 0; + z->img_comp[i].raw_coeff = 0; + z->img_comp[i].linebuf = NULL; + z->img_comp[i].raw_data = stbi__malloc_mad2(z->img_comp[i].w2, z->img_comp[i].h2, 15); + if (z->img_comp[i].raw_data == NULL) + return stbi__free_jpeg_components(z, i+1, stbi__err("outofmem", "Out of memory")); + // align blocks for idct using mmx/sse + z->img_comp[i].data = (stbi_uc*) (((size_t) z->img_comp[i].raw_data + 15) & ~15); + if (z->progressive) { + // w2, h2 are multiples of 8 (see above) + z->img_comp[i].coeff_w = z->img_comp[i].w2 / 8; + z->img_comp[i].coeff_h = z->img_comp[i].h2 / 8; + z->img_comp[i].raw_coeff = stbi__malloc_mad3(z->img_comp[i].w2, z->img_comp[i].h2, sizeof(short), 15); + if (z->img_comp[i].raw_coeff == NULL) + return stbi__free_jpeg_components(z, i+1, stbi__err("outofmem", "Out of memory")); + z->img_comp[i].coeff = (short*) (((size_t) z->img_comp[i].raw_coeff + 15) & ~15); + } + } + + return 1; +} + +// use comparisons since in some cases we handle more than one case (e.g. SOF) +#define stbi__DNL(x) ((x) == 0xdc) +#define stbi__SOI(x) ((x) == 0xd8) +#define stbi__EOI(x) ((x) == 0xd9) +#define stbi__SOF(x) ((x) == 0xc0 || (x) == 0xc1 || (x) == 0xc2) +#define stbi__SOS(x) ((x) == 0xda) + +#define stbi__SOF_progressive(x) ((x) == 0xc2) + +static int stbi__decode_jpeg_header(stbi__jpeg *z, int scan) +{ + int m; + z->marker = STBI__MARKER_none; // initialize cached marker to empty + m = stbi__get_marker(z); + if (!stbi__SOI(m)) return stbi__err("no SOI","Corrupt JPEG"); + if (scan == STBI__SCAN_type) return 1; + m = stbi__get_marker(z); + while (!stbi__SOF(m)) { + if (!stbi__process_marker(z,m)) return 0; + m = stbi__get_marker(z); + while (m == STBI__MARKER_none) { + // some files have extra padding after their blocks, so ok, we'll scan + if (stbi__at_eof(z->s)) return stbi__err("no SOF", "Corrupt JPEG"); + m = stbi__get_marker(z); + } + } + z->progressive = stbi__SOF_progressive(m); + if (!stbi__process_frame_header(z, scan)) return 0; + return 1; +} + +// decode image to YCbCr format +static int stbi__decode_jpeg_image(stbi__jpeg *j) +{ + int m; + for (m = 0; m < 4; m++) { + j->img_comp[m].raw_data = NULL; + j->img_comp[m].raw_coeff = NULL; + } + j->restart_interval = 0; + if (!stbi__decode_jpeg_header(j, STBI__SCAN_load)) return 0; + m = stbi__get_marker(j); + while (!stbi__EOI(m)) { + if (stbi__SOS(m)) { + if (!stbi__process_scan_header(j)) return 0; + if (!stbi__parse_entropy_coded_data(j)) return 0; + if (j->marker == STBI__MARKER_none ) { + // handle 0s at the end of image data from IP Kamera 9060 + while (!stbi__at_eof(j->s)) { + int x = stbi__get8(j->s); + if (x == 255) { + j->marker = stbi__get8(j->s); + break; + } + } + // if we reach eof without hitting a marker, stbi__get_marker() below will fail and we'll eventually return 0 + } + } else if (stbi__DNL(m)) { + int Ld = stbi__get16be(j->s); + stbi__uint32 NL = stbi__get16be(j->s); + if (Ld != 4) stbi__err("bad DNL len", "Corrupt JPEG"); + if (NL != j->s->img_y) stbi__err("bad DNL height", "Corrupt JPEG"); + } else { + if (!stbi__process_marker(j, m)) return 0; + } + m = stbi__get_marker(j); + } + if (j->progressive) + stbi__jpeg_finish(j); + return 1; +} + +// static jfif-centered resampling (across block boundaries) + +typedef stbi_uc *(*resample_row_func)(stbi_uc *out, stbi_uc *in0, stbi_uc *in1, + int w, int hs); + +#define stbi__div4(x) ((stbi_uc) ((x) >> 2)) + +static stbi_uc *resample_row_1(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + STBI_NOTUSED(out); + STBI_NOTUSED(in_far); + STBI_NOTUSED(w); + STBI_NOTUSED(hs); + return in_near; +} + +static stbi_uc* stbi__resample_row_v_2(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + // need to generate two samples vertically for every one in input + int i; + STBI_NOTUSED(hs); + for (i=0; i < w; ++i) + out[i] = stbi__div4(3*in_near[i] + in_far[i] + 2); + return out; +} + +static stbi_uc* stbi__resample_row_h_2(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + // need to generate two samples horizontally for every one in input + int i; + stbi_uc *input = in_near; + + if (w == 1) { + // if only one sample, can't do any interpolation + out[0] = out[1] = input[0]; + return out; + } + + out[0] = input[0]; + out[1] = stbi__div4(input[0]*3 + input[1] + 2); + for (i=1; i < w-1; ++i) { + int n = 3*input[i]+2; + out[i*2+0] = stbi__div4(n+input[i-1]); + out[i*2+1] = stbi__div4(n+input[i+1]); + } + out[i*2+0] = stbi__div4(input[w-2]*3 + input[w-1] + 2); + out[i*2+1] = input[w-1]; + + STBI_NOTUSED(in_far); + STBI_NOTUSED(hs); + + return out; +} + +#define stbi__div16(x) ((stbi_uc) ((x) >> 4)) + +static stbi_uc *stbi__resample_row_hv_2(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + // need to generate 2x2 samples for every one in input + int i,t0,t1; + if (w == 1) { + out[0] = out[1] = stbi__div4(3*in_near[0] + in_far[0] + 2); + return out; + } + + t1 = 3*in_near[0] + in_far[0]; + out[0] = stbi__div4(t1+2); + for (i=1; i < w; ++i) { + t0 = t1; + t1 = 3*in_near[i]+in_far[i]; + out[i*2-1] = stbi__div16(3*t0 + t1 + 8); + out[i*2 ] = stbi__div16(3*t1 + t0 + 8); + } + out[w*2-1] = stbi__div4(t1+2); + + STBI_NOTUSED(hs); + + return out; +} + +#if defined(STBI_SSE2) || defined(STBI_NEON) +static stbi_uc *stbi__resample_row_hv_2_simd(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + // need to generate 2x2 samples for every one in input + int i=0,t0,t1; + + if (w == 1) { + out[0] = out[1] = stbi__div4(3*in_near[0] + in_far[0] + 2); + return out; + } + + t1 = 3*in_near[0] + in_far[0]; + // process groups of 8 pixels for as long as we can. + // note we can't handle the last pixel in a row in this loop + // because we need to handle the filter boundary conditions. + for (; i < ((w-1) & ~7); i += 8) { +#if defined(STBI_SSE2) + // load and perform the vertical filtering pass + // this uses 3*x + y = 4*x + (y - x) + __m128i zero = _mm_setzero_si128(); + __m128i farb = _mm_loadl_epi64((__m128i *) (in_far + i)); + __m128i nearb = _mm_loadl_epi64((__m128i *) (in_near + i)); + __m128i farw = _mm_unpacklo_epi8(farb, zero); + __m128i nearw = _mm_unpacklo_epi8(nearb, zero); + __m128i diff = _mm_sub_epi16(farw, nearw); + __m128i nears = _mm_slli_epi16(nearw, 2); + __m128i curr = _mm_add_epi16(nears, diff); // current row + + // horizontal filter works the same based on shifted vers of current + // row. "prev" is current row shifted right by 1 pixel; we need to + // insert the previous pixel value (from t1). + // "next" is current row shifted left by 1 pixel, with first pixel + // of next block of 8 pixels added in. + __m128i prv0 = _mm_slli_si128(curr, 2); + __m128i nxt0 = _mm_srli_si128(curr, 2); + __m128i prev = _mm_insert_epi16(prv0, t1, 0); + __m128i next = _mm_insert_epi16(nxt0, 3*in_near[i+8] + in_far[i+8], 7); + + // horizontal filter, polyphase implementation since it's convenient: + // even pixels = 3*cur + prev = cur*4 + (prev - cur) + // odd pixels = 3*cur + next = cur*4 + (next - cur) + // note the shared term. + __m128i bias = _mm_set1_epi16(8); + __m128i curs = _mm_slli_epi16(curr, 2); + __m128i prvd = _mm_sub_epi16(prev, curr); + __m128i nxtd = _mm_sub_epi16(next, curr); + __m128i curb = _mm_add_epi16(curs, bias); + __m128i even = _mm_add_epi16(prvd, curb); + __m128i odd = _mm_add_epi16(nxtd, curb); + + // interleave even and odd pixels, then undo scaling. + __m128i int0 = _mm_unpacklo_epi16(even, odd); + __m128i int1 = _mm_unpackhi_epi16(even, odd); + __m128i de0 = _mm_srli_epi16(int0, 4); + __m128i de1 = _mm_srli_epi16(int1, 4); + + // pack and write output + __m128i outv = _mm_packus_epi16(de0, de1); + _mm_storeu_si128((__m128i *) (out + i*2), outv); +#elif defined(STBI_NEON) + // load and perform the vertical filtering pass + // this uses 3*x + y = 4*x + (y - x) + uint8x8_t farb = vld1_u8(in_far + i); + uint8x8_t nearb = vld1_u8(in_near + i); + int16x8_t diff = vreinterpretq_s16_u16(vsubl_u8(farb, nearb)); + int16x8_t nears = vreinterpretq_s16_u16(vshll_n_u8(nearb, 2)); + int16x8_t curr = vaddq_s16(nears, diff); // current row + + // horizontal filter works the same based on shifted vers of current + // row. "prev" is current row shifted right by 1 pixel; we need to + // insert the previous pixel value (from t1). + // "next" is current row shifted left by 1 pixel, with first pixel + // of next block of 8 pixels added in. + int16x8_t prv0 = vextq_s16(curr, curr, 7); + int16x8_t nxt0 = vextq_s16(curr, curr, 1); + int16x8_t prev = vsetq_lane_s16(t1, prv0, 0); + int16x8_t next = vsetq_lane_s16(3*in_near[i+8] + in_far[i+8], nxt0, 7); + + // horizontal filter, polyphase implementation since it's convenient: + // even pixels = 3*cur + prev = cur*4 + (prev - cur) + // odd pixels = 3*cur + next = cur*4 + (next - cur) + // note the shared term. + int16x8_t curs = vshlq_n_s16(curr, 2); + int16x8_t prvd = vsubq_s16(prev, curr); + int16x8_t nxtd = vsubq_s16(next, curr); + int16x8_t even = vaddq_s16(curs, prvd); + int16x8_t odd = vaddq_s16(curs, nxtd); + + // undo scaling and round, then store with even/odd phases interleaved + uint8x8x2_t o; + o.val[0] = vqrshrun_n_s16(even, 4); + o.val[1] = vqrshrun_n_s16(odd, 4); + vst2_u8(out + i*2, o); +#endif + + // "previous" value for next iter + t1 = 3*in_near[i+7] + in_far[i+7]; + } + + t0 = t1; + t1 = 3*in_near[i] + in_far[i]; + out[i*2] = stbi__div16(3*t1 + t0 + 8); + + for (++i; i < w; ++i) { + t0 = t1; + t1 = 3*in_near[i]+in_far[i]; + out[i*2-1] = stbi__div16(3*t0 + t1 + 8); + out[i*2 ] = stbi__div16(3*t1 + t0 + 8); + } + out[w*2-1] = stbi__div4(t1+2); + + STBI_NOTUSED(hs); + + return out; +} +#endif + +static stbi_uc *stbi__resample_row_generic(stbi_uc *out, stbi_uc *in_near, stbi_uc *in_far, int w, int hs) +{ + // resample with nearest-neighbor + int i,j; + STBI_NOTUSED(in_far); + for (i=0; i < w; ++i) + for (j=0; j < hs; ++j) + out[i*hs+j] = in_near[i]; + return out; +} + +// this is a reduced-precision calculation of YCbCr-to-RGB introduced +// to make sure the code produces the same results in both SIMD and scalar +#define stbi__float2fixed(x) (((int) ((x) * 4096.0f + 0.5f)) << 8) +static void stbi__YCbCr_to_RGB_row(stbi_uc *out, const stbi_uc *y, const stbi_uc *pcb, const stbi_uc *pcr, int count, int step) +{ + int i; + for (i=0; i < count; ++i) { + int y_fixed = (y[i] << 20) + (1<<19); // rounding + int r,g,b; + int cr = pcr[i] - 128; + int cb = pcb[i] - 128; + r = y_fixed + cr* stbi__float2fixed(1.40200f); + g = y_fixed + (cr*-stbi__float2fixed(0.71414f)) + ((cb*-stbi__float2fixed(0.34414f)) & 0xffff0000); + b = y_fixed + cb* stbi__float2fixed(1.77200f); + r >>= 20; + g >>= 20; + b >>= 20; + if ((unsigned) r > 255) { if (r < 0) r = 0; else r = 255; } + if ((unsigned) g > 255) { if (g < 0) g = 0; else g = 255; } + if ((unsigned) b > 255) { if (b < 0) b = 0; else b = 255; } + out[0] = (stbi_uc)r; + out[1] = (stbi_uc)g; + out[2] = (stbi_uc)b; + out[3] = 255; + out += step; + } +} + +#if defined(STBI_SSE2) || defined(STBI_NEON) +static void stbi__YCbCr_to_RGB_simd(stbi_uc *out, stbi_uc const *y, stbi_uc const *pcb, stbi_uc const *pcr, int count, int step) +{ + int i = 0; + +#ifdef STBI_SSE2 + // step == 3 is pretty ugly on the final interleave, and i'm not convinced + // it's useful in practice (you wouldn't use it for textures, for example). + // so just accelerate step == 4 case. + if (step == 4) { + // this is a fairly straightforward implementation and not super-optimized. + __m128i signflip = _mm_set1_epi8(-0x80); + __m128i cr_const0 = _mm_set1_epi16( (short) ( 1.40200f*4096.0f+0.5f)); + __m128i cr_const1 = _mm_set1_epi16( - (short) ( 0.71414f*4096.0f+0.5f)); + __m128i cb_const0 = _mm_set1_epi16( - (short) ( 0.34414f*4096.0f+0.5f)); + __m128i cb_const1 = _mm_set1_epi16( (short) ( 1.77200f*4096.0f+0.5f)); + __m128i y_bias = _mm_set1_epi8((char) (unsigned char) 128); + __m128i xw = _mm_set1_epi16(255); // alpha channel + + for (; i+7 < count; i += 8) { + // load + __m128i y_bytes = _mm_loadl_epi64((__m128i *) (y+i)); + __m128i cr_bytes = _mm_loadl_epi64((__m128i *) (pcr+i)); + __m128i cb_bytes = _mm_loadl_epi64((__m128i *) (pcb+i)); + __m128i cr_biased = _mm_xor_si128(cr_bytes, signflip); // -128 + __m128i cb_biased = _mm_xor_si128(cb_bytes, signflip); // -128 + + // unpack to short (and left-shift cr, cb by 8) + __m128i yw = _mm_unpacklo_epi8(y_bias, y_bytes); + __m128i crw = _mm_unpacklo_epi8(_mm_setzero_si128(), cr_biased); + __m128i cbw = _mm_unpacklo_epi8(_mm_setzero_si128(), cb_biased); + + // color transform + __m128i yws = _mm_srli_epi16(yw, 4); + __m128i cr0 = _mm_mulhi_epi16(cr_const0, crw); + __m128i cb0 = _mm_mulhi_epi16(cb_const0, cbw); + __m128i cb1 = _mm_mulhi_epi16(cbw, cb_const1); + __m128i cr1 = _mm_mulhi_epi16(crw, cr_const1); + __m128i rws = _mm_add_epi16(cr0, yws); + __m128i gwt = _mm_add_epi16(cb0, yws); + __m128i bws = _mm_add_epi16(yws, cb1); + __m128i gws = _mm_add_epi16(gwt, cr1); + + // descale + __m128i rw = _mm_srai_epi16(rws, 4); + __m128i bw = _mm_srai_epi16(bws, 4); + __m128i gw = _mm_srai_epi16(gws, 4); + + // back to byte, set up for transpose + __m128i brb = _mm_packus_epi16(rw, bw); + __m128i gxb = _mm_packus_epi16(gw, xw); + + // transpose to interleave channels + __m128i t0 = _mm_unpacklo_epi8(brb, gxb); + __m128i t1 = _mm_unpackhi_epi8(brb, gxb); + __m128i o0 = _mm_unpacklo_epi16(t0, t1); + __m128i o1 = _mm_unpackhi_epi16(t0, t1); + + // store + _mm_storeu_si128((__m128i *) (out + 0), o0); + _mm_storeu_si128((__m128i *) (out + 16), o1); + out += 32; + } + } +#endif + +#ifdef STBI_NEON + // in this version, step=3 support would be easy to add. but is there demand? + if (step == 4) { + // this is a fairly straightforward implementation and not super-optimized. + uint8x8_t signflip = vdup_n_u8(0x80); + int16x8_t cr_const0 = vdupq_n_s16( (short) ( 1.40200f*4096.0f+0.5f)); + int16x8_t cr_const1 = vdupq_n_s16( - (short) ( 0.71414f*4096.0f+0.5f)); + int16x8_t cb_const0 = vdupq_n_s16( - (short) ( 0.34414f*4096.0f+0.5f)); + int16x8_t cb_const1 = vdupq_n_s16( (short) ( 1.77200f*4096.0f+0.5f)); + + for (; i+7 < count; i += 8) { + // load + uint8x8_t y_bytes = vld1_u8(y + i); + uint8x8_t cr_bytes = vld1_u8(pcr + i); + uint8x8_t cb_bytes = vld1_u8(pcb + i); + int8x8_t cr_biased = vreinterpret_s8_u8(vsub_u8(cr_bytes, signflip)); + int8x8_t cb_biased = vreinterpret_s8_u8(vsub_u8(cb_bytes, signflip)); + + // expand to s16 + int16x8_t yws = vreinterpretq_s16_u16(vshll_n_u8(y_bytes, 4)); + int16x8_t crw = vshll_n_s8(cr_biased, 7); + int16x8_t cbw = vshll_n_s8(cb_biased, 7); + + // color transform + int16x8_t cr0 = vqdmulhq_s16(crw, cr_const0); + int16x8_t cb0 = vqdmulhq_s16(cbw, cb_const0); + int16x8_t cr1 = vqdmulhq_s16(crw, cr_const1); + int16x8_t cb1 = vqdmulhq_s16(cbw, cb_const1); + int16x8_t rws = vaddq_s16(yws, cr0); + int16x8_t gws = vaddq_s16(vaddq_s16(yws, cb0), cr1); + int16x8_t bws = vaddq_s16(yws, cb1); + + // undo scaling, round, convert to byte + uint8x8x4_t o; + o.val[0] = vqrshrun_n_s16(rws, 4); + o.val[1] = vqrshrun_n_s16(gws, 4); + o.val[2] = vqrshrun_n_s16(bws, 4); + o.val[3] = vdup_n_u8(255); + + // store, interleaving r/g/b/a + vst4_u8(out, o); + out += 8*4; + } + } +#endif + + for (; i < count; ++i) { + int y_fixed = (y[i] << 20) + (1<<19); // rounding + int r,g,b; + int cr = pcr[i] - 128; + int cb = pcb[i] - 128; + r = y_fixed + cr* stbi__float2fixed(1.40200f); + g = y_fixed + cr*-stbi__float2fixed(0.71414f) + ((cb*-stbi__float2fixed(0.34414f)) & 0xffff0000); + b = y_fixed + cb* stbi__float2fixed(1.77200f); + r >>= 20; + g >>= 20; + b >>= 20; + if ((unsigned) r > 255) { if (r < 0) r = 0; else r = 255; } + if ((unsigned) g > 255) { if (g < 0) g = 0; else g = 255; } + if ((unsigned) b > 255) { if (b < 0) b = 0; else b = 255; } + out[0] = (stbi_uc)r; + out[1] = (stbi_uc)g; + out[2] = (stbi_uc)b; + out[3] = 255; + out += step; + } +} +#endif + +// set up the kernels +static void stbi__setup_jpeg(stbi__jpeg *j) +{ + j->idct_block_kernel = stbi__idct_block; + j->YCbCr_to_RGB_kernel = stbi__YCbCr_to_RGB_row; + j->resample_row_hv_2_kernel = stbi__resample_row_hv_2; + +#ifdef STBI_SSE2 + if (stbi__sse2_available()) { + j->idct_block_kernel = stbi__idct_simd; + j->YCbCr_to_RGB_kernel = stbi__YCbCr_to_RGB_simd; + j->resample_row_hv_2_kernel = stbi__resample_row_hv_2_simd; + } +#endif + +#ifdef STBI_NEON + j->idct_block_kernel = stbi__idct_simd; + j->YCbCr_to_RGB_kernel = stbi__YCbCr_to_RGB_simd; + j->resample_row_hv_2_kernel = stbi__resample_row_hv_2_simd; +#endif +} + +// clean up the temporary component buffers +static void stbi__cleanup_jpeg(stbi__jpeg *j) +{ + stbi__free_jpeg_components(j, j->s->img_n, 0); +} + +typedef struct +{ + resample_row_func resample; + stbi_uc *line0,*line1; + int hs,vs; // expansion factor in each axis + int w_lores; // horizontal pixels pre-expansion + int ystep; // how far through vertical expansion we are + int ypos; // which pre-expansion row we're on +} stbi__resample; + +static stbi_uc *load_jpeg_image(stbi__jpeg *z, int *out_x, int *out_y, int *comp, int req_comp) +{ + int n, decode_n; + z->s->img_n = 0; // make stbi__cleanup_jpeg safe + + // validate req_comp + if (req_comp < 0 || req_comp > 4) return stbi__errpuc("bad req_comp", "Internal error"); + + // load a jpeg image from whichever source, but leave in YCbCr format + if (!stbi__decode_jpeg_image(z)) { stbi__cleanup_jpeg(z); return NULL; } + + // determine actual number of components to generate + n = req_comp ? req_comp : z->s->img_n; + + if (z->s->img_n == 3 && n < 3 && z->rgb != 3) + decode_n = 1; + else + decode_n = z->s->img_n; + + // resample and color-convert + { + int k; + unsigned int i,j; + stbi_uc *output; + stbi_uc *coutput[4]; + + stbi__resample res_comp[4]; + + for (k=0; k < decode_n; ++k) { + stbi__resample *r = &res_comp[k]; + + // allocate line buffer big enough for upsampling off the edges + // with upsample factor of 4 + z->img_comp[k].linebuf = (stbi_uc *) stbi__malloc(z->s->img_x + 3); + if (!z->img_comp[k].linebuf) { stbi__cleanup_jpeg(z); return stbi__errpuc("outofmem", "Out of memory"); } + + r->hs = z->img_h_max / z->img_comp[k].h; + r->vs = z->img_v_max / z->img_comp[k].v; + r->ystep = r->vs >> 1; + r->w_lores = (z->s->img_x + r->hs-1) / r->hs; + r->ypos = 0; + r->line0 = r->line1 = z->img_comp[k].data; + + if (r->hs == 1 && r->vs == 1) r->resample = resample_row_1; + else if (r->hs == 1 && r->vs == 2) r->resample = stbi__resample_row_v_2; + else if (r->hs == 2 && r->vs == 1) r->resample = stbi__resample_row_h_2; + else if (r->hs == 2 && r->vs == 2) r->resample = z->resample_row_hv_2_kernel; + else r->resample = stbi__resample_row_generic; + } + + // can't error after this so, this is safe + output = (stbi_uc *) stbi__malloc_mad3(n, z->s->img_x, z->s->img_y, 1); + if (!output) { stbi__cleanup_jpeg(z); return stbi__errpuc("outofmem", "Out of memory"); } + + // now go ahead and resample + for (j=0; j < z->s->img_y; ++j) { + stbi_uc *out = output + n * z->s->img_x * j; + for (k=0; k < decode_n; ++k) { + stbi__resample *r = &res_comp[k]; + int y_bot = r->ystep >= (r->vs >> 1); + coutput[k] = r->resample(z->img_comp[k].linebuf, + y_bot ? r->line1 : r->line0, + y_bot ? r->line0 : r->line1, + r->w_lores, r->hs); + if (++r->ystep >= r->vs) { + r->ystep = 0; + r->line0 = r->line1; + if (++r->ypos < z->img_comp[k].y) + r->line1 += z->img_comp[k].w2; + } + } + if (n >= 3) { + stbi_uc *y = coutput[0]; + if (z->s->img_n == 3) { + if (z->rgb == 3) { + for (i=0; i < z->s->img_x; ++i) { + out[0] = y[i]; + out[1] = coutput[1][i]; + out[2] = coutput[2][i]; + out[3] = 255; + out += n; + } + } else { + z->YCbCr_to_RGB_kernel(out, y, coutput[1], coutput[2], z->s->img_x, n); + } + } else + for (i=0; i < z->s->img_x; ++i) { + out[0] = out[1] = out[2] = y[i]; + out[3] = 255; // not used if n==3 + out += n; + } + } else { + if (z->rgb == 3) { + if (n == 1) + for (i=0; i < z->s->img_x; ++i) + *out++ = stbi__compute_y(coutput[0][i], coutput[1][i], coutput[2][i]); + else { + for (i=0; i < z->s->img_x; ++i, out += 2) { + out[0] = stbi__compute_y(coutput[0][i], coutput[1][i], coutput[2][i]); + out[1] = 255; + } + } + } else { + stbi_uc *y = coutput[0]; + if (n == 1) + for (i=0; i < z->s->img_x; ++i) out[i] = y[i]; + else + for (i=0; i < z->s->img_x; ++i) *out++ = y[i], *out++ = 255; + } + } + } + stbi__cleanup_jpeg(z); + *out_x = z->s->img_x; + *out_y = z->s->img_y; + if (comp) *comp = z->s->img_n; // report original components, not output + return output; + } +} + +static void *stbi__jpeg_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + unsigned char* result; + stbi__jpeg* j = (stbi__jpeg*) stbi__malloc(sizeof(stbi__jpeg)); + j->s = s; + stbi__setup_jpeg(j); + result = load_jpeg_image(j, x,y,comp,req_comp); + STBI_FREE(j); + return result; +} + +static int stbi__jpeg_test(stbi__context *s) +{ + int r; + stbi__jpeg* j = (stbi__jpeg*)stbi__malloc(sizeof(stbi__jpeg)); + j->s = s; + stbi__setup_jpeg(j); + r = stbi__decode_jpeg_header(j, STBI__SCAN_type); + stbi__rewind(s); + STBI_FREE(j); + return r; +} + +static int stbi__jpeg_info_raw(stbi__jpeg *j, int *x, int *y, int *comp) +{ + if (!stbi__decode_jpeg_header(j, STBI__SCAN_header)) { + stbi__rewind( j->s ); + return 0; + } + if (x) *x = j->s->img_x; + if (y) *y = j->s->img_y; + if (comp) *comp = j->s->img_n; + return 1; +} + +static int stbi__jpeg_info(stbi__context *s, int *x, int *y, int *comp) +{ + int result; + stbi__jpeg* j = (stbi__jpeg*) (stbi__malloc(sizeof(stbi__jpeg))); + j->s = s; + result = stbi__jpeg_info_raw(j, x, y, comp); + STBI_FREE(j); + return result; +} +#endif + +// public domain zlib decode v0.2 Sean Barrett 2006-11-18 +// simple implementation +// - all input must be provided in an upfront buffer +// - all output is written to a single output buffer (can malloc/realloc) +// performance +// - fast huffman + +#ifndef STBI_NO_ZLIB + +// fast-way is faster to check than jpeg huffman, but slow way is slower +#define STBI__ZFAST_BITS 9 // accelerate all cases in default tables +#define STBI__ZFAST_MASK ((1 << STBI__ZFAST_BITS) - 1) + +// zlib-style huffman encoding +// (jpegs packs from left, zlib from right, so can't share code) +typedef struct +{ + stbi__uint16 fast[1 << STBI__ZFAST_BITS]; + stbi__uint16 firstcode[16]; + int maxcode[17]; + stbi__uint16 firstsymbol[16]; + stbi_uc size[288]; + stbi__uint16 value[288]; +} stbi__zhuffman; + +stbi_inline static int stbi__bitreverse16(int n) +{ + n = ((n & 0xAAAA) >> 1) | ((n & 0x5555) << 1); + n = ((n & 0xCCCC) >> 2) | ((n & 0x3333) << 2); + n = ((n & 0xF0F0) >> 4) | ((n & 0x0F0F) << 4); + n = ((n & 0xFF00) >> 8) | ((n & 0x00FF) << 8); + return n; +} + +stbi_inline static int stbi__bit_reverse(int v, int bits) +{ + STBI_ASSERT(bits <= 16); + // to bit reverse n bits, reverse 16 and shift + // e.g. 11 bits, bit reverse and shift away 5 + return stbi__bitreverse16(v) >> (16-bits); +} + +static int stbi__zbuild_huffman(stbi__zhuffman *z, stbi_uc *sizelist, int num) +{ + int i,k=0; + int code, next_code[16], sizes[17]; + + // DEFLATE spec for generating codes + memset(sizes, 0, sizeof(sizes)); + memset(z->fast, 0, sizeof(z->fast)); + for (i=0; i < num; ++i) + ++sizes[sizelist[i]]; + sizes[0] = 0; + for (i=1; i < 16; ++i) + if (sizes[i] > (1 << i)) + return stbi__err("bad sizes", "Corrupt PNG"); + code = 0; + for (i=1; i < 16; ++i) { + next_code[i] = code; + z->firstcode[i] = (stbi__uint16) code; + z->firstsymbol[i] = (stbi__uint16) k; + code = (code + sizes[i]); + if (sizes[i]) + if (code-1 >= (1 << i)) return stbi__err("bad codelengths","Corrupt PNG"); + z->maxcode[i] = code << (16-i); // preshift for inner loop + code <<= 1; + k += sizes[i]; + } + z->maxcode[16] = 0x10000; // sentinel + for (i=0; i < num; ++i) { + int s = sizelist[i]; + if (s) { + int c = next_code[s] - z->firstcode[s] + z->firstsymbol[s]; + stbi__uint16 fastv = (stbi__uint16) ((s << 9) | i); + z->size [c] = (stbi_uc ) s; + z->value[c] = (stbi__uint16) i; + if (s <= STBI__ZFAST_BITS) { + int j = stbi__bit_reverse(next_code[s],s); + while (j < (1 << STBI__ZFAST_BITS)) { + z->fast[j] = fastv; + j += (1 << s); + } + } + ++next_code[s]; + } + } + return 1; +} + +// zlib-from-memory implementation for PNG reading +// because PNG allows splitting the zlib stream arbitrarily, +// and it's annoying structurally to have PNG call ZLIB call PNG, +// we require PNG read all the IDATs and combine them into a single +// memory buffer + +typedef struct +{ + stbi_uc *zbuffer, *zbuffer_end; + int num_bits; + stbi__uint32 code_buffer; + + char *zout; + char *zout_start; + char *zout_end; + int z_expandable; + + stbi__zhuffman z_length, z_distance; +} stbi__zbuf; + +stbi_inline static stbi_uc stbi__zget8(stbi__zbuf *z) +{ + if (z->zbuffer >= z->zbuffer_end) return 0; + return *z->zbuffer++; +} + +static void stbi__fill_bits(stbi__zbuf *z) +{ + do { + STBI_ASSERT(z->code_buffer < (1U << z->num_bits)); + z->code_buffer |= (unsigned int) stbi__zget8(z) << z->num_bits; + z->num_bits += 8; + } while (z->num_bits <= 24); +} + +stbi_inline static unsigned int stbi__zreceive(stbi__zbuf *z, int n) +{ + unsigned int k; + if (z->num_bits < n) stbi__fill_bits(z); + k = z->code_buffer & ((1 << n) - 1); + z->code_buffer >>= n; + z->num_bits -= n; + return k; +} + +static int stbi__zhuffman_decode_slowpath(stbi__zbuf *a, stbi__zhuffman *z) +{ + int b,s,k; + // not resolved by fast table, so compute it the slow way + // use jpeg approach, which requires MSbits at top + k = stbi__bit_reverse(a->code_buffer, 16); + for (s=STBI__ZFAST_BITS+1; ; ++s) + if (k < z->maxcode[s]) + break; + if (s == 16) return -1; // invalid code! + // code size is s, so: + b = (k >> (16-s)) - z->firstcode[s] + z->firstsymbol[s]; + STBI_ASSERT(z->size[b] == s); + a->code_buffer >>= s; + a->num_bits -= s; + return z->value[b]; +} + +stbi_inline static int stbi__zhuffman_decode(stbi__zbuf *a, stbi__zhuffman *z) +{ + int b,s; + if (a->num_bits < 16) stbi__fill_bits(a); + b = z->fast[a->code_buffer & STBI__ZFAST_MASK]; + if (b) { + s = b >> 9; + a->code_buffer >>= s; + a->num_bits -= s; + return b & 511; + } + return stbi__zhuffman_decode_slowpath(a, z); +} + +static int stbi__zexpand(stbi__zbuf *z, char *zout, int n) // need to make room for n bytes +{ + char *q; + int cur, limit, old_limit; + z->zout = zout; + if (!z->z_expandable) return stbi__err("output buffer limit","Corrupt PNG"); + cur = (int) (z->zout - z->zout_start); + limit = old_limit = (int) (z->zout_end - z->zout_start); + while (cur + n > limit) + limit *= 2; + q = (char *) STBI_REALLOC_SIZED(z->zout_start, old_limit, limit); + STBI_NOTUSED(old_limit); + if (q == NULL) return stbi__err("outofmem", "Out of memory"); + z->zout_start = q; + z->zout = q + cur; + z->zout_end = q + limit; + return 1; +} + +static int stbi__zlength_base[31] = { + 3,4,5,6,7,8,9,10,11,13, + 15,17,19,23,27,31,35,43,51,59, + 67,83,99,115,131,163,195,227,258,0,0 }; + +static int stbi__zlength_extra[31]= +{ 0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0,0,0 }; + +static int stbi__zdist_base[32] = { 1,2,3,4,5,7,9,13,17,25,33,49,65,97,129,193, +257,385,513,769,1025,1537,2049,3073,4097,6145,8193,12289,16385,24577,0,0}; + +static int stbi__zdist_extra[32] = +{ 0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + +static int stbi__parse_huffman_block(stbi__zbuf *a) +{ + char *zout = a->zout; + for(;;) { + int z = stbi__zhuffman_decode(a, &a->z_length); + if (z < 256) { + if (z < 0) return stbi__err("bad huffman code","Corrupt PNG"); // error in huffman codes + if (zout >= a->zout_end) { + if (!stbi__zexpand(a, zout, 1)) return 0; + zout = a->zout; + } + *zout++ = (char) z; + } else { + stbi_uc *p; + int len,dist; + if (z == 256) { + a->zout = zout; + return 1; + } + z -= 257; + len = stbi__zlength_base[z]; + if (stbi__zlength_extra[z]) len += stbi__zreceive(a, stbi__zlength_extra[z]); + z = stbi__zhuffman_decode(a, &a->z_distance); + if (z < 0) return stbi__err("bad huffman code","Corrupt PNG"); + dist = stbi__zdist_base[z]; + if (stbi__zdist_extra[z]) dist += stbi__zreceive(a, stbi__zdist_extra[z]); + if (zout - a->zout_start < dist) return stbi__err("bad dist","Corrupt PNG"); + if (zout + len > a->zout_end) { + if (!stbi__zexpand(a, zout, len)) return 0; + zout = a->zout; + } + p = (stbi_uc *) (zout - dist); + if (dist == 1) { // run of one byte; common in images. + stbi_uc v = *p; + if (len) { do *zout++ = v; while (--len); } + } else { + if (len) { do *zout++ = *p++; while (--len); } + } + } + } +} + +static int stbi__compute_huffman_codes(stbi__zbuf *a) +{ + static stbi_uc length_dezigzag[19] = { 16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15 }; + stbi__zhuffman z_codelength; + stbi_uc lencodes[286+32+137];//padding for maximum single op + stbi_uc codelength_sizes[19]; + int i,n; + + int hlit = stbi__zreceive(a,5) + 257; + int hdist = stbi__zreceive(a,5) + 1; + int hclen = stbi__zreceive(a,4) + 4; + int ntot = hlit + hdist; + + memset(codelength_sizes, 0, sizeof(codelength_sizes)); + for (i=0; i < hclen; ++i) { + int s = stbi__zreceive(a,3); + codelength_sizes[length_dezigzag[i]] = (stbi_uc) s; + } + if (!stbi__zbuild_huffman(&z_codelength, codelength_sizes, 19)) return 0; + + n = 0; + while (n < ntot) { + int c = stbi__zhuffman_decode(a, &z_codelength); + if (c < 0 || c >= 19) return stbi__err("bad codelengths", "Corrupt PNG"); + if (c < 16) + lencodes[n++] = (stbi_uc) c; + else { + stbi_uc fill = 0; + if (c == 16) { + c = stbi__zreceive(a,2)+3; + if (n == 0) return stbi__err("bad codelengths", "Corrupt PNG"); + fill = lencodes[n-1]; + } else if (c == 17) + c = stbi__zreceive(a,3)+3; + else { + STBI_ASSERT(c == 18); + c = stbi__zreceive(a,7)+11; + } + if (ntot - n < c) return stbi__err("bad codelengths", "Corrupt PNG"); + memset(lencodes+n, fill, c); + n += c; + } + } + if (n != ntot) return stbi__err("bad codelengths","Corrupt PNG"); + if (!stbi__zbuild_huffman(&a->z_length, lencodes, hlit)) return 0; + if (!stbi__zbuild_huffman(&a->z_distance, lencodes+hlit, hdist)) return 0; + return 1; +} + +static int stbi__parse_uncompressed_block(stbi__zbuf *a) +{ + stbi_uc header[4]; + int len,nlen,k; + if (a->num_bits & 7) + stbi__zreceive(a, a->num_bits & 7); // discard + // drain the bit-packed data into header + k = 0; + while (a->num_bits > 0) { + header[k++] = (stbi_uc) (a->code_buffer & 255); // suppress MSVC run-time check + a->code_buffer >>= 8; + a->num_bits -= 8; + } + STBI_ASSERT(a->num_bits == 0); + // now fill header the normal way + while (k < 4) + header[k++] = stbi__zget8(a); + len = header[1] * 256 + header[0]; + nlen = header[3] * 256 + header[2]; + if (nlen != (len ^ 0xffff)) return stbi__err("zlib corrupt","Corrupt PNG"); + if (a->zbuffer + len > a->zbuffer_end) return stbi__err("read past buffer","Corrupt PNG"); + if (a->zout + len > a->zout_end) + if (!stbi__zexpand(a, a->zout, len)) return 0; + memcpy(a->zout, a->zbuffer, len); + a->zbuffer += len; + a->zout += len; + return 1; +} + +static int stbi__parse_zlib_header(stbi__zbuf *a) +{ + int cmf = stbi__zget8(a); + int cm = cmf & 15; + /* int cinfo = cmf >> 4; */ + int flg = stbi__zget8(a); + if ((cmf*256+flg) % 31 != 0) return stbi__err("bad zlib header","Corrupt PNG"); // zlib spec + if (flg & 32) return stbi__err("no preset dict","Corrupt PNG"); // preset dictionary not allowed in png + if (cm != 8) return stbi__err("bad compression","Corrupt PNG"); // DEFLATE required for png + // window = 1 << (8 + cinfo)... but who cares, we fully buffer output + return 1; +} + +// @TODO: should statically initialize these for optimal thread safety +static stbi_uc stbi__zdefault_length[288], stbi__zdefault_distance[32]; +static void stbi__init_zdefaults(void) +{ + int i; // use <= to match clearly with spec + for (i=0; i <= 143; ++i) stbi__zdefault_length[i] = 8; + for ( ; i <= 255; ++i) stbi__zdefault_length[i] = 9; + for ( ; i <= 279; ++i) stbi__zdefault_length[i] = 7; + for ( ; i <= 287; ++i) stbi__zdefault_length[i] = 8; + + for (i=0; i <= 31; ++i) stbi__zdefault_distance[i] = 5; +} + +static int stbi__parse_zlib(stbi__zbuf *a, int parse_header) +{ + int final, type; + if (parse_header) + if (!stbi__parse_zlib_header(a)) return 0; + a->num_bits = 0; + a->code_buffer = 0; + do { + final = stbi__zreceive(a,1); + type = stbi__zreceive(a,2); + if (type == 0) { + if (!stbi__parse_uncompressed_block(a)) return 0; + } else if (type == 3) { + return 0; + } else { + if (type == 1) { + // use fixed code lengths + if (!stbi__zdefault_distance[31]) stbi__init_zdefaults(); + if (!stbi__zbuild_huffman(&a->z_length , stbi__zdefault_length , 288)) return 0; + if (!stbi__zbuild_huffman(&a->z_distance, stbi__zdefault_distance, 32)) return 0; + } else { + if (!stbi__compute_huffman_codes(a)) return 0; + } + if (!stbi__parse_huffman_block(a)) return 0; + } + } while (!final); + return 1; +} + +static int stbi__do_zlib(stbi__zbuf *a, char *obuf, int olen, int exp, int parse_header) +{ + a->zout_start = obuf; + a->zout = obuf; + a->zout_end = obuf + olen; + a->z_expandable = exp; + + return stbi__parse_zlib(a, parse_header); +} + +STBIDEF char *stbi_zlib_decode_malloc_guesssize(const char *buffer, int len, int initial_size, int *outlen) +{ + stbi__zbuf a; + char *p = (char *) stbi__malloc(initial_size); + if (p == NULL) return NULL; + a.zbuffer = (stbi_uc *) buffer; + a.zbuffer_end = (stbi_uc *) buffer + len; + if (stbi__do_zlib(&a, p, initial_size, 1, 1)) { + if (outlen) *outlen = (int) (a.zout - a.zout_start); + return a.zout_start; + } else { + STBI_FREE(a.zout_start); + return NULL; + } +} + +STBIDEF char *stbi_zlib_decode_malloc(char const *buffer, int len, int *outlen) +{ + return stbi_zlib_decode_malloc_guesssize(buffer, len, 16384, outlen); +} + +STBIDEF char *stbi_zlib_decode_malloc_guesssize_headerflag(const char *buffer, int len, int initial_size, int *outlen, int parse_header) +{ + stbi__zbuf a; + char *p = (char *) stbi__malloc(initial_size); + if (p == NULL) return NULL; + a.zbuffer = (stbi_uc *) buffer; + a.zbuffer_end = (stbi_uc *) buffer + len; + if (stbi__do_zlib(&a, p, initial_size, 1, parse_header)) { + if (outlen) *outlen = (int) (a.zout - a.zout_start); + return a.zout_start; + } else { + STBI_FREE(a.zout_start); + return NULL; + } +} + +STBIDEF int stbi_zlib_decode_buffer(char *obuffer, int olen, char const *ibuffer, int ilen) +{ + stbi__zbuf a; + a.zbuffer = (stbi_uc *) ibuffer; + a.zbuffer_end = (stbi_uc *) ibuffer + ilen; + if (stbi__do_zlib(&a, obuffer, olen, 0, 1)) + return (int) (a.zout - a.zout_start); + else + return -1; +} + +STBIDEF char *stbi_zlib_decode_noheader_malloc(char const *buffer, int len, int *outlen) +{ + stbi__zbuf a; + char *p = (char *) stbi__malloc(16384); + if (p == NULL) return NULL; + a.zbuffer = (stbi_uc *) buffer; + a.zbuffer_end = (stbi_uc *) buffer+len; + if (stbi__do_zlib(&a, p, 16384, 1, 0)) { + if (outlen) *outlen = (int) (a.zout - a.zout_start); + return a.zout_start; + } else { + STBI_FREE(a.zout_start); + return NULL; + } +} + +STBIDEF int stbi_zlib_decode_noheader_buffer(char *obuffer, int olen, const char *ibuffer, int ilen) +{ + stbi__zbuf a; + a.zbuffer = (stbi_uc *) ibuffer; + a.zbuffer_end = (stbi_uc *) ibuffer + ilen; + if (stbi__do_zlib(&a, obuffer, olen, 0, 0)) + return (int) (a.zout - a.zout_start); + else + return -1; +} +#endif + +// public domain "baseline" PNG decoder v0.10 Sean Barrett 2006-11-18 +// simple implementation +// - only 8-bit samples +// - no CRC checking +// - allocates lots of intermediate memory +// - avoids problem of streaming data between subsystems +// - avoids explicit window management +// performance +// - uses stb_zlib, a PD zlib implementation with fast huffman decoding + +#ifndef STBI_NO_PNG +typedef struct +{ + stbi__uint32 length; + stbi__uint32 type; +} stbi__pngchunk; + +static stbi__pngchunk stbi__get_chunk_header(stbi__context *s) +{ + stbi__pngchunk c; + c.length = stbi__get32be(s); + c.type = stbi__get32be(s); + return c; +} + +static int stbi__check_png_header(stbi__context *s) +{ + static stbi_uc png_sig[8] = { 137,80,78,71,13,10,26,10 }; + int i; + for (i=0; i < 8; ++i) + if (stbi__get8(s) != png_sig[i]) return stbi__err("bad png sig","Not a PNG"); + return 1; +} + +typedef struct +{ + stbi__context *s; + stbi_uc *idata, *expanded, *out; + int depth; +} stbi__png; + + +enum { + STBI__F_none=0, + STBI__F_sub=1, + STBI__F_up=2, + STBI__F_avg=3, + STBI__F_paeth=4, + // synthetic filters used for first scanline to avoid needing a dummy row of 0s + STBI__F_avg_first, + STBI__F_paeth_first +}; + +static stbi_uc first_row_filter[5] = +{ + STBI__F_none, + STBI__F_sub, + STBI__F_none, + STBI__F_avg_first, + STBI__F_paeth_first +}; + +static int stbi__paeth(int a, int b, int c) +{ + int p = a + b - c; + int pa = abs(p-a); + int pb = abs(p-b); + int pc = abs(p-c); + if (pa <= pb && pa <= pc) return a; + if (pb <= pc) return b; + return c; +} + +static stbi_uc stbi__depth_scale_table[9] = { 0, 0xff, 0x55, 0, 0x11, 0,0,0, 0x01 }; + +// create the png data from post-deflated data +static int stbi__create_png_image_raw(stbi__png *a, stbi_uc *raw, stbi__uint32 raw_len, int out_n, stbi__uint32 x, stbi__uint32 y, int depth, int color) +{ + int bytes = (depth == 16? 2 : 1); + stbi__context *s = a->s; + stbi__uint32 i,j,stride = x*out_n*bytes; + stbi__uint32 img_len, img_width_bytes; + int k; + int img_n = s->img_n; // copy it into a local for later + + int output_bytes = out_n*bytes; + int filter_bytes = img_n*bytes; + int width = x; + + STBI_ASSERT(out_n == s->img_n || out_n == s->img_n+1); + a->out = (stbi_uc *) stbi__malloc_mad3(x, y, output_bytes, 0); // extra bytes to write off the end into + if (!a->out) return stbi__err("outofmem", "Out of memory"); + + img_width_bytes = (((img_n * x * depth) + 7) >> 3); + img_len = (img_width_bytes + 1) * y; + if (s->img_x == x && s->img_y == y) { + if (raw_len != img_len) return stbi__err("not enough pixels","Corrupt PNG"); + } else { // interlaced: + if (raw_len < img_len) return stbi__err("not enough pixels","Corrupt PNG"); + } + + for (j=0; j < y; ++j) { + stbi_uc *cur = a->out + stride*j; + stbi_uc *prior = cur - stride; + int filter = *raw++; + + if (filter > 4) + return stbi__err("invalid filter","Corrupt PNG"); + + if (depth < 8) { + STBI_ASSERT(img_width_bytes <= x); + cur += x*out_n - img_width_bytes; // store output to the rightmost img_len bytes, so we can decode in place + filter_bytes = 1; + width = img_width_bytes; + } + + // if first row, use special filter that doesn't sample previous row + if (j == 0) filter = first_row_filter[filter]; + + // handle first byte explicitly + for (k=0; k < filter_bytes; ++k) { + switch (filter) { + case STBI__F_none : cur[k] = raw[k]; break; + case STBI__F_sub : cur[k] = raw[k]; break; + case STBI__F_up : cur[k] = STBI__BYTECAST(raw[k] + prior[k]); break; + case STBI__F_avg : cur[k] = STBI__BYTECAST(raw[k] + (prior[k]>>1)); break; + case STBI__F_paeth : cur[k] = STBI__BYTECAST(raw[k] + stbi__paeth(0,prior[k],0)); break; + case STBI__F_avg_first : cur[k] = raw[k]; break; + case STBI__F_paeth_first: cur[k] = raw[k]; break; + } + } + + if (depth == 8) { + if (img_n != out_n) + cur[img_n] = 255; // first pixel + raw += img_n; + cur += out_n; + prior += out_n; + } else if (depth == 16) { + if (img_n != out_n) { + cur[filter_bytes] = 255; // first pixel top byte + cur[filter_bytes+1] = 255; // first pixel bottom byte + } + raw += filter_bytes; + cur += output_bytes; + prior += output_bytes; + } else { + raw += 1; + cur += 1; + prior += 1; + } + + // this is a little gross, so that we don't switch per-pixel or per-component + if (depth < 8 || img_n == out_n) { + int nk = (width - 1)*filter_bytes; + #define STBI__CASE(f) \ + case f: \ + for (k=0; k < nk; ++k) + switch (filter) { + // "none" filter turns into a memcpy here; make that explicit. + case STBI__F_none: memcpy(cur, raw, nk); break; + STBI__CASE(STBI__F_sub) { cur[k] = STBI__BYTECAST(raw[k] + cur[k-filter_bytes]); } break; + STBI__CASE(STBI__F_up) { cur[k] = STBI__BYTECAST(raw[k] + prior[k]); } break; + STBI__CASE(STBI__F_avg) { cur[k] = STBI__BYTECAST(raw[k] + ((prior[k] + cur[k-filter_bytes])>>1)); } break; + STBI__CASE(STBI__F_paeth) { cur[k] = STBI__BYTECAST(raw[k] + stbi__paeth(cur[k-filter_bytes],prior[k],prior[k-filter_bytes])); } break; + STBI__CASE(STBI__F_avg_first) { cur[k] = STBI__BYTECAST(raw[k] + (cur[k-filter_bytes] >> 1)); } break; + STBI__CASE(STBI__F_paeth_first) { cur[k] = STBI__BYTECAST(raw[k] + stbi__paeth(cur[k-filter_bytes],0,0)); } break; + } + #undef STBI__CASE + raw += nk; + } else { + STBI_ASSERT(img_n+1 == out_n); + #define STBI__CASE(f) \ + case f: \ + for (i=x-1; i >= 1; --i, cur[filter_bytes]=255,raw+=filter_bytes,cur+=output_bytes,prior+=output_bytes) \ + for (k=0; k < filter_bytes; ++k) + switch (filter) { + STBI__CASE(STBI__F_none) { cur[k] = raw[k]; } break; + STBI__CASE(STBI__F_sub) { cur[k] = STBI__BYTECAST(raw[k] + cur[k- output_bytes]); } break; + STBI__CASE(STBI__F_up) { cur[k] = STBI__BYTECAST(raw[k] + prior[k]); } break; + STBI__CASE(STBI__F_avg) { cur[k] = STBI__BYTECAST(raw[k] + ((prior[k] + cur[k- output_bytes])>>1)); } break; + STBI__CASE(STBI__F_paeth) { cur[k] = STBI__BYTECAST(raw[k] + stbi__paeth(cur[k- output_bytes],prior[k],prior[k- output_bytes])); } break; + STBI__CASE(STBI__F_avg_first) { cur[k] = STBI__BYTECAST(raw[k] + (cur[k- output_bytes] >> 1)); } break; + STBI__CASE(STBI__F_paeth_first) { cur[k] = STBI__BYTECAST(raw[k] + stbi__paeth(cur[k- output_bytes],0,0)); } break; + } + #undef STBI__CASE + + // the loop above sets the high byte of the pixels' alpha, but for + // 16 bit png files we also need the low byte set. we'll do that here. + if (depth == 16) { + cur = a->out + stride*j; // start at the beginning of the row again + for (i=0; i < x; ++i,cur+=output_bytes) { + cur[filter_bytes+1] = 255; + } + } + } + } + + // we make a separate pass to expand bits to pixels; for performance, + // this could run two scanlines behind the above code, so it won't + // intefere with filtering but will still be in the cache. + if (depth < 8) { + for (j=0; j < y; ++j) { + stbi_uc *cur = a->out + stride*j; + stbi_uc *in = a->out + stride*j + x*out_n - img_width_bytes; + // unpack 1/2/4-bit into a 8-bit buffer. allows us to keep the common 8-bit path optimal at minimal cost for 1/2/4-bit + // png guarante byte alignment, if width is not multiple of 8/4/2 we'll decode dummy trailing data that will be skipped in the later loop + stbi_uc scale = (color == 0) ? stbi__depth_scale_table[depth] : 1; // scale grayscale values to 0..255 range + + // note that the final byte might overshoot and write more data than desired. + // we can allocate enough data that this never writes out of memory, but it + // could also overwrite the next scanline. can it overwrite non-empty data + // on the next scanline? yes, consider 1-pixel-wide scanlines with 1-bit-per-pixel. + // so we need to explicitly clamp the final ones + + if (depth == 4) { + for (k=x*img_n; k >= 2; k-=2, ++in) { + *cur++ = scale * ((*in >> 4) ); + *cur++ = scale * ((*in ) & 0x0f); + } + if (k > 0) *cur++ = scale * ((*in >> 4) ); + } else if (depth == 2) { + for (k=x*img_n; k >= 4; k-=4, ++in) { + *cur++ = scale * ((*in >> 6) ); + *cur++ = scale * ((*in >> 4) & 0x03); + *cur++ = scale * ((*in >> 2) & 0x03); + *cur++ = scale * ((*in ) & 0x03); + } + if (k > 0) *cur++ = scale * ((*in >> 6) ); + if (k > 1) *cur++ = scale * ((*in >> 4) & 0x03); + if (k > 2) *cur++ = scale * ((*in >> 2) & 0x03); + } else if (depth == 1) { + for (k=x*img_n; k >= 8; k-=8, ++in) { + *cur++ = scale * ((*in >> 7) ); + *cur++ = scale * ((*in >> 6) & 0x01); + *cur++ = scale * ((*in >> 5) & 0x01); + *cur++ = scale * ((*in >> 4) & 0x01); + *cur++ = scale * ((*in >> 3) & 0x01); + *cur++ = scale * ((*in >> 2) & 0x01); + *cur++ = scale * ((*in >> 1) & 0x01); + *cur++ = scale * ((*in ) & 0x01); + } + if (k > 0) *cur++ = scale * ((*in >> 7) ); + if (k > 1) *cur++ = scale * ((*in >> 6) & 0x01); + if (k > 2) *cur++ = scale * ((*in >> 5) & 0x01); + if (k > 3) *cur++ = scale * ((*in >> 4) & 0x01); + if (k > 4) *cur++ = scale * ((*in >> 3) & 0x01); + if (k > 5) *cur++ = scale * ((*in >> 2) & 0x01); + if (k > 6) *cur++ = scale * ((*in >> 1) & 0x01); + } + if (img_n != out_n) { + int q; + // insert alpha = 255 + cur = a->out + stride*j; + if (img_n == 1) { + for (q=x-1; q >= 0; --q) { + cur[q*2+1] = 255; + cur[q*2+0] = cur[q]; + } + } else { + STBI_ASSERT(img_n == 3); + for (q=x-1; q >= 0; --q) { + cur[q*4+3] = 255; + cur[q*4+2] = cur[q*3+2]; + cur[q*4+1] = cur[q*3+1]; + cur[q*4+0] = cur[q*3+0]; + } + } + } + } + } else if (depth == 16) { + // force the image data from big-endian to platform-native. + // this is done in a separate pass due to the decoding relying + // on the data being untouched, but could probably be done + // per-line during decode if care is taken. + stbi_uc *cur = a->out; + stbi__uint16 *cur16 = (stbi__uint16*)cur; + + for(i=0; i < x*y*out_n; ++i,cur16++,cur+=2) { + *cur16 = (cur[0] << 8) | cur[1]; + } + } + + return 1; +} + +static int stbi__create_png_image(stbi__png *a, stbi_uc *image_data, stbi__uint32 image_data_len, int out_n, int depth, int color, int interlaced) +{ + int bytes = (depth == 16 ? 2 : 1); + int out_bytes = out_n * bytes; + stbi_uc *final; + int p; + if (!interlaced) + return stbi__create_png_image_raw(a, image_data, image_data_len, out_n, a->s->img_x, a->s->img_y, depth, color); + + // de-interlacing + final = (stbi_uc *) stbi__malloc_mad3(a->s->img_x, a->s->img_y, out_bytes, 0); + for (p=0; p < 7; ++p) { + int xorig[] = { 0,4,0,2,0,1,0 }; + int yorig[] = { 0,0,4,0,2,0,1 }; + int xspc[] = { 8,8,4,4,2,2,1 }; + int yspc[] = { 8,8,8,4,4,2,2 }; + int i,j,x,y; + // pass1_x[4] = 0, pass1_x[5] = 1, pass1_x[12] = 1 + x = (a->s->img_x - xorig[p] + xspc[p]-1) / xspc[p]; + y = (a->s->img_y - yorig[p] + yspc[p]-1) / yspc[p]; + if (x && y) { + stbi__uint32 img_len = ((((a->s->img_n * x * depth) + 7) >> 3) + 1) * y; + if (!stbi__create_png_image_raw(a, image_data, image_data_len, out_n, x, y, depth, color)) { + STBI_FREE(final); + return 0; + } + for (j=0; j < y; ++j) { + for (i=0; i < x; ++i) { + int out_y = j*yspc[p]+yorig[p]; + int out_x = i*xspc[p]+xorig[p]; + memcpy(final + out_y*a->s->img_x*out_bytes + out_x*out_bytes, + a->out + (j*x+i)*out_bytes, out_bytes); + } + } + STBI_FREE(a->out); + image_data += img_len; + image_data_len -= img_len; + } + } + a->out = final; + + return 1; +} + +static int stbi__compute_transparency(stbi__png *z, stbi_uc tc[3], int out_n) +{ + stbi__context *s = z->s; + stbi__uint32 i, pixel_count = s->img_x * s->img_y; + stbi_uc *p = z->out; + + // compute color-based transparency, assuming we've + // already got 255 as the alpha value in the output + STBI_ASSERT(out_n == 2 || out_n == 4); + + if (out_n == 2) { + for (i=0; i < pixel_count; ++i) { + p[1] = (p[0] == tc[0] ? 0 : 255); + p += 2; + } + } else { + for (i=0; i < pixel_count; ++i) { + if (p[0] == tc[0] && p[1] == tc[1] && p[2] == tc[2]) + p[3] = 0; + p += 4; + } + } + return 1; +} + +static int stbi__compute_transparency16(stbi__png *z, stbi__uint16 tc[3], int out_n) +{ + stbi__context *s = z->s; + stbi__uint32 i, pixel_count = s->img_x * s->img_y; + stbi__uint16 *p = (stbi__uint16*) z->out; + + // compute color-based transparency, assuming we've + // already got 65535 as the alpha value in the output + STBI_ASSERT(out_n == 2 || out_n == 4); + + if (out_n == 2) { + for (i = 0; i < pixel_count; ++i) { + p[1] = (p[0] == tc[0] ? 0 : 65535); + p += 2; + } + } else { + for (i = 0; i < pixel_count; ++i) { + if (p[0] == tc[0] && p[1] == tc[1] && p[2] == tc[2]) + p[3] = 0; + p += 4; + } + } + return 1; +} + +static int stbi__expand_png_palette(stbi__png *a, stbi_uc *palette, int len, int pal_img_n) +{ + stbi__uint32 i, pixel_count = a->s->img_x * a->s->img_y; + stbi_uc *p, *temp_out, *orig = a->out; + + p = (stbi_uc *) stbi__malloc_mad2(pixel_count, pal_img_n, 0); + if (p == NULL) return stbi__err("outofmem", "Out of memory"); + + // between here and free(out) below, exitting would leak + temp_out = p; + + if (pal_img_n == 3) { + for (i=0; i < pixel_count; ++i) { + int n = orig[i]*4; + p[0] = palette[n ]; + p[1] = palette[n+1]; + p[2] = palette[n+2]; + p += 3; + } + } else { + for (i=0; i < pixel_count; ++i) { + int n = orig[i]*4; + p[0] = palette[n ]; + p[1] = palette[n+1]; + p[2] = palette[n+2]; + p[3] = palette[n+3]; + p += 4; + } + } + STBI_FREE(a->out); + a->out = temp_out; + + STBI_NOTUSED(len); + + return 1; +} + +static int stbi__unpremultiply_on_load = 0; +static int stbi__de_iphone_flag = 0; + +STBIDEF void stbi_set_unpremultiply_on_load(int flag_true_if_should_unpremultiply) +{ + stbi__unpremultiply_on_load = flag_true_if_should_unpremultiply; +} + +STBIDEF void stbi_convert_iphone_png_to_rgb(int flag_true_if_should_convert) +{ + stbi__de_iphone_flag = flag_true_if_should_convert; +} + +static void stbi__de_iphone(stbi__png *z) +{ + stbi__context *s = z->s; + stbi__uint32 i, pixel_count = s->img_x * s->img_y; + stbi_uc *p = z->out; + + if (s->img_out_n == 3) { // convert bgr to rgb + for (i=0; i < pixel_count; ++i) { + stbi_uc t = p[0]; + p[0] = p[2]; + p[2] = t; + p += 3; + } + } else { + STBI_ASSERT(s->img_out_n == 4); + if (stbi__unpremultiply_on_load) { + // convert bgr to rgb and unpremultiply + for (i=0; i < pixel_count; ++i) { + stbi_uc a = p[3]; + stbi_uc t = p[0]; + if (a) { + p[0] = p[2] * 255 / a; + p[1] = p[1] * 255 / a; + p[2] = t * 255 / a; + } else { + p[0] = p[2]; + p[2] = t; + } + p += 4; + } + } else { + // convert bgr to rgb + for (i=0; i < pixel_count; ++i) { + stbi_uc t = p[0]; + p[0] = p[2]; + p[2] = t; + p += 4; + } + } + } +} + +#define STBI__PNG_TYPE(a,b,c,d) (((a) << 24) + ((b) << 16) + ((c) << 8) + (d)) + +static int stbi__parse_png_file(stbi__png *z, int scan, int req_comp) +{ + stbi_uc palette[1024], pal_img_n=0; + stbi_uc has_trans=0, tc[3]; + stbi__uint16 tc16[3]; + stbi__uint32 ioff=0, idata_limit=0, i, pal_len=0; + int first=1,k,interlace=0, color=0, is_iphone=0; + stbi__context *s = z->s; + + z->expanded = NULL; + z->idata = NULL; + z->out = NULL; + + if (!stbi__check_png_header(s)) return 0; + + if (scan == STBI__SCAN_type) return 1; + + for (;;) { + stbi__pngchunk c = stbi__get_chunk_header(s); + switch (c.type) { + case STBI__PNG_TYPE('C','g','B','I'): + is_iphone = 1; + stbi__skip(s, c.length); + break; + case STBI__PNG_TYPE('I','H','D','R'): { + int comp,filter; + if (!first) return stbi__err("multiple IHDR","Corrupt PNG"); + first = 0; + if (c.length != 13) return stbi__err("bad IHDR len","Corrupt PNG"); + s->img_x = stbi__get32be(s); if (s->img_x > (1 << 24)) return stbi__err("too large","Very large image (corrupt?)"); + s->img_y = stbi__get32be(s); if (s->img_y > (1 << 24)) return stbi__err("too large","Very large image (corrupt?)"); + z->depth = stbi__get8(s); if (z->depth != 1 && z->depth != 2 && z->depth != 4 && z->depth != 8 && z->depth != 16) return stbi__err("1/2/4/8/16-bit only","PNG not supported: 1/2/4/8/16-bit only"); + color = stbi__get8(s); if (color > 6) return stbi__err("bad ctype","Corrupt PNG"); + if (color == 3 && z->depth == 16) return stbi__err("bad ctype","Corrupt PNG"); + if (color == 3) pal_img_n = 3; else if (color & 1) return stbi__err("bad ctype","Corrupt PNG"); + comp = stbi__get8(s); if (comp) return stbi__err("bad comp method","Corrupt PNG"); + filter= stbi__get8(s); if (filter) return stbi__err("bad filter method","Corrupt PNG"); + interlace = stbi__get8(s); if (interlace>1) return stbi__err("bad interlace method","Corrupt PNG"); + if (!s->img_x || !s->img_y) return stbi__err("0-pixel image","Corrupt PNG"); + if (!pal_img_n) { + s->img_n = (color & 2 ? 3 : 1) + (color & 4 ? 1 : 0); + if ((1 << 30) / s->img_x / s->img_n < s->img_y) return stbi__err("too large", "Image too large to decode"); + if (scan == STBI__SCAN_header) return 1; + } else { + // if paletted, then pal_n is our final components, and + // img_n is # components to decompress/filter. + s->img_n = 1; + if ((1 << 30) / s->img_x / 4 < s->img_y) return stbi__err("too large","Corrupt PNG"); + // if SCAN_header, have to scan to see if we have a tRNS + } + break; + } + + case STBI__PNG_TYPE('P','L','T','E'): { + if (first) return stbi__err("first not IHDR", "Corrupt PNG"); + if (c.length > 256*3) return stbi__err("invalid PLTE","Corrupt PNG"); + pal_len = c.length / 3; + if (pal_len * 3 != c.length) return stbi__err("invalid PLTE","Corrupt PNG"); + for (i=0; i < pal_len; ++i) { + palette[i*4+0] = stbi__get8(s); + palette[i*4+1] = stbi__get8(s); + palette[i*4+2] = stbi__get8(s); + palette[i*4+3] = 255; + } + break; + } + + case STBI__PNG_TYPE('t','R','N','S'): { + if (first) return stbi__err("first not IHDR", "Corrupt PNG"); + if (z->idata) return stbi__err("tRNS after IDAT","Corrupt PNG"); + if (pal_img_n) { + if (scan == STBI__SCAN_header) { s->img_n = 4; return 1; } + if (pal_len == 0) return stbi__err("tRNS before PLTE","Corrupt PNG"); + if (c.length > pal_len) return stbi__err("bad tRNS len","Corrupt PNG"); + pal_img_n = 4; + for (i=0; i < c.length; ++i) + palette[i*4+3] = stbi__get8(s); + } else { + if (!(s->img_n & 1)) return stbi__err("tRNS with alpha","Corrupt PNG"); + if (c.length != (stbi__uint32) s->img_n*2) return stbi__err("bad tRNS len","Corrupt PNG"); + has_trans = 1; + if (z->depth == 16) { + for (k = 0; k < s->img_n; ++k) tc16[k] = (stbi__uint16)stbi__get16be(s); // copy the values as-is + } else { + for (k = 0; k < s->img_n; ++k) tc[k] = (stbi_uc)(stbi__get16be(s) & 255) * stbi__depth_scale_table[z->depth]; // non 8-bit images will be larger + } + } + break; + } + + case STBI__PNG_TYPE('I','D','A','T'): { + if (first) return stbi__err("first not IHDR", "Corrupt PNG"); + if (pal_img_n && !pal_len) return stbi__err("no PLTE","Corrupt PNG"); + if (scan == STBI__SCAN_header) { s->img_n = pal_img_n; return 1; } + if ((int)(ioff + c.length) < (int)ioff) return 0; + if (ioff + c.length > idata_limit) { + stbi__uint32 idata_limit_old = idata_limit; + stbi_uc *p; + if (idata_limit == 0) idata_limit = c.length > 4096 ? c.length : 4096; + while (ioff + c.length > idata_limit) + idata_limit *= 2; + STBI_NOTUSED(idata_limit_old); + p = (stbi_uc *) STBI_REALLOC_SIZED(z->idata, idata_limit_old, idata_limit); if (p == NULL) return stbi__err("outofmem", "Out of memory"); + z->idata = p; + } + if (!stbi__getn(s, z->idata+ioff,c.length)) return stbi__err("outofdata","Corrupt PNG"); + ioff += c.length; + break; + } + + case STBI__PNG_TYPE('I','E','N','D'): { + stbi__uint32 raw_len, bpl; + if (first) return stbi__err("first not IHDR", "Corrupt PNG"); + if (scan != STBI__SCAN_load) return 1; + if (z->idata == NULL) return stbi__err("no IDAT","Corrupt PNG"); + // initial guess for decoded data size to avoid unnecessary reallocs + bpl = (s->img_x * z->depth + 7) / 8; // bytes per line, per component + raw_len = bpl * s->img_y * s->img_n /* pixels */ + s->img_y /* filter mode per row */; + z->expanded = (stbi_uc *) stbi_zlib_decode_malloc_guesssize_headerflag((char *) z->idata, ioff, raw_len, (int *) &raw_len, !is_iphone); + if (z->expanded == NULL) return 0; // zlib should set error + STBI_FREE(z->idata); z->idata = NULL; + if ((req_comp == s->img_n+1 && req_comp != 3 && !pal_img_n) || has_trans) + s->img_out_n = s->img_n+1; + else + s->img_out_n = s->img_n; + if (!stbi__create_png_image(z, z->expanded, raw_len, s->img_out_n, z->depth, color, interlace)) return 0; + if (has_trans) { + if (z->depth == 16) { + if (!stbi__compute_transparency16(z, tc16, s->img_out_n)) return 0; + } else { + if (!stbi__compute_transparency(z, tc, s->img_out_n)) return 0; + } + } + if (is_iphone && stbi__de_iphone_flag && s->img_out_n > 2) + stbi__de_iphone(z); + if (pal_img_n) { + // pal_img_n == 3 or 4 + s->img_n = pal_img_n; // record the actual colors we had + s->img_out_n = pal_img_n; + if (req_comp >= 3) s->img_out_n = req_comp; + if (!stbi__expand_png_palette(z, palette, pal_len, s->img_out_n)) + return 0; + } + STBI_FREE(z->expanded); z->expanded = NULL; + return 1; + } + + default: + // if critical, fail + if (first) return stbi__err("first not IHDR", "Corrupt PNG"); + if ((c.type & (1 << 29)) == 0) { + #ifndef STBI_NO_FAILURE_STRINGS + // not threadsafe + static char invalid_chunk[] = "XXXX PNG chunk not known"; + invalid_chunk[0] = STBI__BYTECAST(c.type >> 24); + invalid_chunk[1] = STBI__BYTECAST(c.type >> 16); + invalid_chunk[2] = STBI__BYTECAST(c.type >> 8); + invalid_chunk[3] = STBI__BYTECAST(c.type >> 0); + #endif + return stbi__err(invalid_chunk, "PNG not supported: unknown PNG chunk type"); + } + stbi__skip(s, c.length); + break; + } + // end of PNG chunk, read and skip CRC + stbi__get32be(s); + } +} + +static void *stbi__do_png(stbi__png *p, int *x, int *y, int *n, int req_comp, stbi__result_info *ri) +{ + void *result=NULL; + if (req_comp < 0 || req_comp > 4) return stbi__errpuc("bad req_comp", "Internal error"); + if (stbi__parse_png_file(p, STBI__SCAN_load, req_comp)) { + if (p->depth < 8) + ri->bits_per_channel = 8; + else + ri->bits_per_channel = p->depth; + result = p->out; + p->out = NULL; + if (req_comp && req_comp != p->s->img_out_n) { + if (ri->bits_per_channel == 8) + result = stbi__convert_format((unsigned char *) result, p->s->img_out_n, req_comp, p->s->img_x, p->s->img_y); + else + result = stbi__convert_format16((stbi__uint16 *) result, p->s->img_out_n, req_comp, p->s->img_x, p->s->img_y); + p->s->img_out_n = req_comp; + if (result == NULL) return result; + } + *x = p->s->img_x; + *y = p->s->img_y; + if (n) *n = p->s->img_n; + } + STBI_FREE(p->out); p->out = NULL; + STBI_FREE(p->expanded); p->expanded = NULL; + STBI_FREE(p->idata); p->idata = NULL; + + return result; +} + +static void *stbi__png_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + stbi__png p; + p.s = s; + return stbi__do_png(&p, x,y,comp,req_comp, ri); +} + +static int stbi__png_test(stbi__context *s) +{ + int r; + r = stbi__check_png_header(s); + stbi__rewind(s); + return r; +} + +static int stbi__png_info_raw(stbi__png *p, int *x, int *y, int *comp) +{ + if (!stbi__parse_png_file(p, STBI__SCAN_header, 0)) { + stbi__rewind( p->s ); + return 0; + } + if (x) *x = p->s->img_x; + if (y) *y = p->s->img_y; + if (comp) *comp = p->s->img_n; + return 1; +} + +static int stbi__png_info(stbi__context *s, int *x, int *y, int *comp) +{ + stbi__png p; + p.s = s; + return stbi__png_info_raw(&p, x, y, comp); +} +#endif + +// Microsoft/Windows BMP image + +#ifndef STBI_NO_BMP +static int stbi__bmp_test_raw(stbi__context *s) +{ + int r; + int sz; + if (stbi__get8(s) != 'B') return 0; + if (stbi__get8(s) != 'M') return 0; + stbi__get32le(s); // discard filesize + stbi__get16le(s); // discard reserved + stbi__get16le(s); // discard reserved + stbi__get32le(s); // discard data offset + sz = stbi__get32le(s); + r = (sz == 12 || sz == 40 || sz == 56 || sz == 108 || sz == 124); + return r; +} + +static int stbi__bmp_test(stbi__context *s) +{ + int r = stbi__bmp_test_raw(s); + stbi__rewind(s); + return r; +} + + +// returns 0..31 for the highest set bit +static int stbi__high_bit(unsigned int z) +{ + int n=0; + if (z == 0) return -1; + if (z >= 0x10000) n += 16, z >>= 16; + if (z >= 0x00100) n += 8, z >>= 8; + if (z >= 0x00010) n += 4, z >>= 4; + if (z >= 0x00004) n += 2, z >>= 2; + if (z >= 0x00002) n += 1, z >>= 1; + return n; +} + +static int stbi__bitcount(unsigned int a) +{ + a = (a & 0x55555555) + ((a >> 1) & 0x55555555); // max 2 + a = (a & 0x33333333) + ((a >> 2) & 0x33333333); // max 4 + a = (a + (a >> 4)) & 0x0f0f0f0f; // max 8 per 4, now 8 bits + a = (a + (a >> 8)); // max 16 per 8 bits + a = (a + (a >> 16)); // max 32 per 8 bits + return a & 0xff; +} + +static int stbi__shiftsigned(int v, int shift, int bits) +{ + int result; + int z=0; + + if (shift < 0) v <<= -shift; + else v >>= shift; + result = v; + + z = bits; + while (z < 8) { + result += v >> z; + z += bits; + } + return result; +} + +typedef struct +{ + int bpp, offset, hsz; + unsigned int mr,mg,mb,ma, all_a; +} stbi__bmp_data; + +static void *stbi__bmp_parse_header(stbi__context *s, stbi__bmp_data *info) +{ + int hsz; + if (stbi__get8(s) != 'B' || stbi__get8(s) != 'M') return stbi__errpuc("not BMP", "Corrupt BMP"); + stbi__get32le(s); // discard filesize + stbi__get16le(s); // discard reserved + stbi__get16le(s); // discard reserved + info->offset = stbi__get32le(s); + info->hsz = hsz = stbi__get32le(s); + info->mr = info->mg = info->mb = info->ma = 0; + + if (hsz != 12 && hsz != 40 && hsz != 56 && hsz != 108 && hsz != 124) return stbi__errpuc("unknown BMP", "BMP type not supported: unknown"); + if (hsz == 12) { + s->img_x = stbi__get16le(s); + s->img_y = stbi__get16le(s); + } else { + s->img_x = stbi__get32le(s); + s->img_y = stbi__get32le(s); + } + if (stbi__get16le(s) != 1) return stbi__errpuc("bad BMP", "bad BMP"); + info->bpp = stbi__get16le(s); + if (info->bpp == 1) return stbi__errpuc("monochrome", "BMP type not supported: 1-bit"); + if (hsz != 12) { + int compress = stbi__get32le(s); + if (compress == 1 || compress == 2) return stbi__errpuc("BMP RLE", "BMP type not supported: RLE"); + stbi__get32le(s); // discard sizeof + stbi__get32le(s); // discard hres + stbi__get32le(s); // discard vres + stbi__get32le(s); // discard colorsused + stbi__get32le(s); // discard max important + if (hsz == 40 || hsz == 56) { + if (hsz == 56) { + stbi__get32le(s); + stbi__get32le(s); + stbi__get32le(s); + stbi__get32le(s); + } + if (info->bpp == 16 || info->bpp == 32) { + if (compress == 0) { + if (info->bpp == 32) { + info->mr = 0xffu << 16; + info->mg = 0xffu << 8; + info->mb = 0xffu << 0; + info->ma = 0xffu << 24; + info->all_a = 0; // if all_a is 0 at end, then we loaded alpha channel but it was all 0 + } else { + info->mr = 31u << 10; + info->mg = 31u << 5; + info->mb = 31u << 0; + } + } else if (compress == 3) { + info->mr = stbi__get32le(s); + info->mg = stbi__get32le(s); + info->mb = stbi__get32le(s); + // not documented, but generated by photoshop and handled by mspaint + if (info->mr == info->mg && info->mg == info->mb) { + // ?!?!? + return stbi__errpuc("bad BMP", "bad BMP"); + } + } else + return stbi__errpuc("bad BMP", "bad BMP"); + } + } else { + int i; + if (hsz != 108 && hsz != 124) + return stbi__errpuc("bad BMP", "bad BMP"); + info->mr = stbi__get32le(s); + info->mg = stbi__get32le(s); + info->mb = stbi__get32le(s); + info->ma = stbi__get32le(s); + stbi__get32le(s); // discard color space + for (i=0; i < 12; ++i) + stbi__get32le(s); // discard color space parameters + if (hsz == 124) { + stbi__get32le(s); // discard rendering intent + stbi__get32le(s); // discard offset of profile data + stbi__get32le(s); // discard size of profile data + stbi__get32le(s); // discard reserved + } + } + } + return (void *) 1; +} + + +static void *stbi__bmp_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + stbi_uc *out; + unsigned int mr=0,mg=0,mb=0,ma=0, all_a; + stbi_uc pal[256][4]; + int psize=0,i,j,width; + int flip_vertically, pad, target; + stbi__bmp_data info; + STBI_NOTUSED(ri); + + info.all_a = 255; + if (stbi__bmp_parse_header(s, &info) == NULL) + return NULL; // error code already set + + flip_vertically = ((int) s->img_y) > 0; + s->img_y = abs((int) s->img_y); + + mr = info.mr; + mg = info.mg; + mb = info.mb; + ma = info.ma; + all_a = info.all_a; + + if (info.hsz == 12) { + if (info.bpp < 24) + psize = (info.offset - 14 - 24) / 3; + } else { + if (info.bpp < 16) + psize = (info.offset - 14 - info.hsz) >> 2; + } + + s->img_n = ma ? 4 : 3; + if (req_comp && req_comp >= 3) // we can directly decode 3 or 4 + target = req_comp; + else + target = s->img_n; // if they want monochrome, we'll post-convert + + // sanity-check size + if (!stbi__mad3sizes_valid(target, s->img_x, s->img_y, 0)) + return stbi__errpuc("too large", "Corrupt BMP"); + + out = (stbi_uc *) stbi__malloc_mad3(target, s->img_x, s->img_y, 0); + if (!out) return stbi__errpuc("outofmem", "Out of memory"); + if (info.bpp < 16) { + int z=0; + if (psize == 0 || psize > 256) { STBI_FREE(out); return stbi__errpuc("invalid", "Corrupt BMP"); } + for (i=0; i < psize; ++i) { + pal[i][2] = stbi__get8(s); + pal[i][1] = stbi__get8(s); + pal[i][0] = stbi__get8(s); + if (info.hsz != 12) stbi__get8(s); + pal[i][3] = 255; + } + stbi__skip(s, info.offset - 14 - info.hsz - psize * (info.hsz == 12 ? 3 : 4)); + if (info.bpp == 4) width = (s->img_x + 1) >> 1; + else if (info.bpp == 8) width = s->img_x; + else { STBI_FREE(out); return stbi__errpuc("bad bpp", "Corrupt BMP"); } + pad = (-width)&3; + for (j=0; j < (int) s->img_y; ++j) { + for (i=0; i < (int) s->img_x; i += 2) { + int v=stbi__get8(s),v2=0; + if (info.bpp == 4) { + v2 = v & 15; + v >>= 4; + } + out[z++] = pal[v][0]; + out[z++] = pal[v][1]; + out[z++] = pal[v][2]; + if (target == 4) out[z++] = 255; + if (i+1 == (int) s->img_x) break; + v = (info.bpp == 8) ? stbi__get8(s) : v2; + out[z++] = pal[v][0]; + out[z++] = pal[v][1]; + out[z++] = pal[v][2]; + if (target == 4) out[z++] = 255; + } + stbi__skip(s, pad); + } + } else { + int rshift=0,gshift=0,bshift=0,ashift=0,rcount=0,gcount=0,bcount=0,acount=0; + int z = 0; + int easy=0; + stbi__skip(s, info.offset - 14 - info.hsz); + if (info.bpp == 24) width = 3 * s->img_x; + else if (info.bpp == 16) width = 2*s->img_x; + else /* bpp = 32 and pad = 0 */ width=0; + pad = (-width) & 3; + if (info.bpp == 24) { + easy = 1; + } else if (info.bpp == 32) { + if (mb == 0xff && mg == 0xff00 && mr == 0x00ff0000 && ma == 0xff000000) + easy = 2; + } + if (!easy) { + if (!mr || !mg || !mb) { STBI_FREE(out); return stbi__errpuc("bad masks", "Corrupt BMP"); } + // right shift amt to put high bit in position #7 + rshift = stbi__high_bit(mr)-7; rcount = stbi__bitcount(mr); + gshift = stbi__high_bit(mg)-7; gcount = stbi__bitcount(mg); + bshift = stbi__high_bit(mb)-7; bcount = stbi__bitcount(mb); + ashift = stbi__high_bit(ma)-7; acount = stbi__bitcount(ma); + } + for (j=0; j < (int) s->img_y; ++j) { + if (easy) { + for (i=0; i < (int) s->img_x; ++i) { + unsigned char a; + out[z+2] = stbi__get8(s); + out[z+1] = stbi__get8(s); + out[z+0] = stbi__get8(s); + z += 3; + a = (easy == 2 ? stbi__get8(s) : 255); + all_a |= a; + if (target == 4) out[z++] = a; + } + } else { + int bpp = info.bpp; + for (i=0; i < (int) s->img_x; ++i) { + stbi__uint32 v = (bpp == 16 ? (stbi__uint32) stbi__get16le(s) : stbi__get32le(s)); + int a; + out[z++] = STBI__BYTECAST(stbi__shiftsigned(v & mr, rshift, rcount)); + out[z++] = STBI__BYTECAST(stbi__shiftsigned(v & mg, gshift, gcount)); + out[z++] = STBI__BYTECAST(stbi__shiftsigned(v & mb, bshift, bcount)); + a = (ma ? stbi__shiftsigned(v & ma, ashift, acount) : 255); + all_a |= a; + if (target == 4) out[z++] = STBI__BYTECAST(a); + } + } + stbi__skip(s, pad); + } + } + + // if alpha channel is all 0s, replace with all 255s + if (target == 4 && all_a == 0) + for (i=4*s->img_x*s->img_y-1; i >= 0; i -= 4) + out[i] = 255; + + if (flip_vertically) { + stbi_uc t; + for (j=0; j < (int) s->img_y>>1; ++j) { + stbi_uc *p1 = out + j *s->img_x*target; + stbi_uc *p2 = out + (s->img_y-1-j)*s->img_x*target; + for (i=0; i < (int) s->img_x*target; ++i) { + t = p1[i], p1[i] = p2[i], p2[i] = t; + } + } + } + + if (req_comp && req_comp != target) { + out = stbi__convert_format(out, target, req_comp, s->img_x, s->img_y); + if (out == NULL) return out; // stbi__convert_format frees input on failure + } + + *x = s->img_x; + *y = s->img_y; + if (comp) *comp = s->img_n; + return out; +} +#endif + +// Targa Truevision - TGA +// by Jonathan Dummer +#ifndef STBI_NO_TGA +// returns STBI_rgb or whatever, 0 on error +static int stbi__tga_get_comp(int bits_per_pixel, int is_grey, int* is_rgb16) +{ + // only RGB or RGBA (incl. 16bit) or grey allowed + if(is_rgb16) *is_rgb16 = 0; + switch(bits_per_pixel) { + case 8: return STBI_grey; + case 16: if(is_grey) return STBI_grey_alpha; + // else: fall-through + case 15: if(is_rgb16) *is_rgb16 = 1; + return STBI_rgb; + case 24: // fall-through + case 32: return bits_per_pixel/8; + default: return 0; + } +} + +static int stbi__tga_info(stbi__context *s, int *x, int *y, int *comp) +{ + int tga_w, tga_h, tga_comp, tga_image_type, tga_bits_per_pixel, tga_colormap_bpp; + int sz, tga_colormap_type; + stbi__get8(s); // discard Offset + tga_colormap_type = stbi__get8(s); // colormap type + if( tga_colormap_type > 1 ) { + stbi__rewind(s); + return 0; // only RGB or indexed allowed + } + tga_image_type = stbi__get8(s); // image type + if ( tga_colormap_type == 1 ) { // colormapped (paletted) image + if (tga_image_type != 1 && tga_image_type != 9) { + stbi__rewind(s); + return 0; + } + stbi__skip(s,4); // skip index of first colormap entry and number of entries + sz = stbi__get8(s); // check bits per palette color entry + if ( (sz != 8) && (sz != 15) && (sz != 16) && (sz != 24) && (sz != 32) ) { + stbi__rewind(s); + return 0; + } + stbi__skip(s,4); // skip image x and y origin + tga_colormap_bpp = sz; + } else { // "normal" image w/o colormap - only RGB or grey allowed, +/- RLE + if ( (tga_image_type != 2) && (tga_image_type != 3) && (tga_image_type != 10) && (tga_image_type != 11) ) { + stbi__rewind(s); + return 0; // only RGB or grey allowed, +/- RLE + } + stbi__skip(s,9); // skip colormap specification and image x/y origin + tga_colormap_bpp = 0; + } + tga_w = stbi__get16le(s); + if( tga_w < 1 ) { + stbi__rewind(s); + return 0; // test width + } + tga_h = stbi__get16le(s); + if( tga_h < 1 ) { + stbi__rewind(s); + return 0; // test height + } + tga_bits_per_pixel = stbi__get8(s); // bits per pixel + stbi__get8(s); // ignore alpha bits + if (tga_colormap_bpp != 0) { + if((tga_bits_per_pixel != 8) && (tga_bits_per_pixel != 16)) { + // when using a colormap, tga_bits_per_pixel is the size of the indexes + // I don't think anything but 8 or 16bit indexes makes sense + stbi__rewind(s); + return 0; + } + tga_comp = stbi__tga_get_comp(tga_colormap_bpp, 0, NULL); + } else { + tga_comp = stbi__tga_get_comp(tga_bits_per_pixel, (tga_image_type == 3) || (tga_image_type == 11), NULL); + } + if(!tga_comp) { + stbi__rewind(s); + return 0; + } + if (x) *x = tga_w; + if (y) *y = tga_h; + if (comp) *comp = tga_comp; + return 1; // seems to have passed everything +} + +static int stbi__tga_test(stbi__context *s) +{ + int res = 0; + int sz, tga_color_type; + stbi__get8(s); // discard Offset + tga_color_type = stbi__get8(s); // color type + if ( tga_color_type > 1 ) goto errorEnd; // only RGB or indexed allowed + sz = stbi__get8(s); // image type + if ( tga_color_type == 1 ) { // colormapped (paletted) image + if (sz != 1 && sz != 9) goto errorEnd; // colortype 1 demands image type 1 or 9 + stbi__skip(s,4); // skip index of first colormap entry and number of entries + sz = stbi__get8(s); // check bits per palette color entry + if ( (sz != 8) && (sz != 15) && (sz != 16) && (sz != 24) && (sz != 32) ) goto errorEnd; + stbi__skip(s,4); // skip image x and y origin + } else { // "normal" image w/o colormap + if ( (sz != 2) && (sz != 3) && (sz != 10) && (sz != 11) ) goto errorEnd; // only RGB or grey allowed, +/- RLE + stbi__skip(s,9); // skip colormap specification and image x/y origin + } + if ( stbi__get16le(s) < 1 ) goto errorEnd; // test width + if ( stbi__get16le(s) < 1 ) goto errorEnd; // test height + sz = stbi__get8(s); // bits per pixel + if ( (tga_color_type == 1) && (sz != 8) && (sz != 16) ) goto errorEnd; // for colormapped images, bpp is size of an index + if ( (sz != 8) && (sz != 15) && (sz != 16) && (sz != 24) && (sz != 32) ) goto errorEnd; + + res = 1; // if we got this far, everything's good and we can return 1 instead of 0 + +errorEnd: + stbi__rewind(s); + return res; +} + +// read 16bit value and convert to 24bit RGB +static void stbi__tga_read_rgb16(stbi__context *s, stbi_uc* out) +{ + stbi__uint16 px = (stbi__uint16)stbi__get16le(s); + stbi__uint16 fiveBitMask = 31; + // we have 3 channels with 5bits each + int r = (px >> 10) & fiveBitMask; + int g = (px >> 5) & fiveBitMask; + int b = px & fiveBitMask; + // Note that this saves the data in RGB(A) order, so it doesn't need to be swapped later + out[0] = (stbi_uc)((r * 255)/31); + out[1] = (stbi_uc)((g * 255)/31); + out[2] = (stbi_uc)((b * 255)/31); + + // some people claim that the most significant bit might be used for alpha + // (possibly if an alpha-bit is set in the "image descriptor byte") + // but that only made 16bit test images completely translucent.. + // so let's treat all 15 and 16bit TGAs as RGB with no alpha. +} + +static void *stbi__tga_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + // read in the TGA header stuff + int tga_offset = stbi__get8(s); + int tga_indexed = stbi__get8(s); + int tga_image_type = stbi__get8(s); + int tga_is_RLE = 0; + int tga_palette_start = stbi__get16le(s); + int tga_palette_len = stbi__get16le(s); + int tga_palette_bits = stbi__get8(s); + int tga_x_origin = stbi__get16le(s); + int tga_y_origin = stbi__get16le(s); + int tga_width = stbi__get16le(s); + int tga_height = stbi__get16le(s); + int tga_bits_per_pixel = stbi__get8(s); + int tga_comp, tga_rgb16=0; + int tga_inverted = stbi__get8(s); + // int tga_alpha_bits = tga_inverted & 15; // the 4 lowest bits - unused (useless?) + // image data + unsigned char *tga_data; + unsigned char *tga_palette = NULL; + int i, j; + unsigned char raw_data[4] = {0}; + int RLE_count = 0; + int RLE_repeating = 0; + int read_next_pixel = 1; + STBI_NOTUSED(ri); + + // do a tiny bit of precessing + if ( tga_image_type >= 8 ) + { + tga_image_type -= 8; + tga_is_RLE = 1; + } + tga_inverted = 1 - ((tga_inverted >> 5) & 1); + + // If I'm paletted, then I'll use the number of bits from the palette + if ( tga_indexed ) tga_comp = stbi__tga_get_comp(tga_palette_bits, 0, &tga_rgb16); + else tga_comp = stbi__tga_get_comp(tga_bits_per_pixel, (tga_image_type == 3), &tga_rgb16); + + if(!tga_comp) // shouldn't really happen, stbi__tga_test() should have ensured basic consistency + return stbi__errpuc("bad format", "Can't find out TGA pixelformat"); + + // tga info + *x = tga_width; + *y = tga_height; + if (comp) *comp = tga_comp; + + if (!stbi__mad3sizes_valid(tga_width, tga_height, tga_comp, 0)) + return stbi__errpuc("too large", "Corrupt TGA"); + + tga_data = (unsigned char*)stbi__malloc_mad3(tga_width, tga_height, tga_comp, 0); + if (!tga_data) return stbi__errpuc("outofmem", "Out of memory"); + + // skip to the data's starting position (offset usually = 0) + stbi__skip(s, tga_offset ); + + if ( !tga_indexed && !tga_is_RLE && !tga_rgb16 ) { + for (i=0; i < tga_height; ++i) { + int row = tga_inverted ? tga_height -i - 1 : i; + stbi_uc *tga_row = tga_data + row*tga_width*tga_comp; + stbi__getn(s, tga_row, tga_width * tga_comp); + } + } else { + // do I need to load a palette? + if ( tga_indexed) + { + // any data to skip? (offset usually = 0) + stbi__skip(s, tga_palette_start ); + // load the palette + tga_palette = (unsigned char*)stbi__malloc_mad2(tga_palette_len, tga_comp, 0); + if (!tga_palette) { + STBI_FREE(tga_data); + return stbi__errpuc("outofmem", "Out of memory"); + } + if (tga_rgb16) { + stbi_uc *pal_entry = tga_palette; + STBI_ASSERT(tga_comp == STBI_rgb); + for (i=0; i < tga_palette_len; ++i) { + stbi__tga_read_rgb16(s, pal_entry); + pal_entry += tga_comp; + } + } else if (!stbi__getn(s, tga_palette, tga_palette_len * tga_comp)) { + STBI_FREE(tga_data); + STBI_FREE(tga_palette); + return stbi__errpuc("bad palette", "Corrupt TGA"); + } + } + // load the data + for (i=0; i < tga_width * tga_height; ++i) + { + // if I'm in RLE mode, do I need to get a RLE stbi__pngchunk? + if ( tga_is_RLE ) + { + if ( RLE_count == 0 ) + { + // yep, get the next byte as a RLE command + int RLE_cmd = stbi__get8(s); + RLE_count = 1 + (RLE_cmd & 127); + RLE_repeating = RLE_cmd >> 7; + read_next_pixel = 1; + } else if ( !RLE_repeating ) + { + read_next_pixel = 1; + } + } else + { + read_next_pixel = 1; + } + // OK, if I need to read a pixel, do it now + if ( read_next_pixel ) + { + // load however much data we did have + if ( tga_indexed ) + { + // read in index, then perform the lookup + int pal_idx = (tga_bits_per_pixel == 8) ? stbi__get8(s) : stbi__get16le(s); + if ( pal_idx >= tga_palette_len ) { + // invalid index + pal_idx = 0; + } + pal_idx *= tga_comp; + for (j = 0; j < tga_comp; ++j) { + raw_data[j] = tga_palette[pal_idx+j]; + } + } else if(tga_rgb16) { + STBI_ASSERT(tga_comp == STBI_rgb); + stbi__tga_read_rgb16(s, raw_data); + } else { + // read in the data raw + for (j = 0; j < tga_comp; ++j) { + raw_data[j] = stbi__get8(s); + } + } + // clear the reading flag for the next pixel + read_next_pixel = 0; + } // end of reading a pixel + + // copy data + for (j = 0; j < tga_comp; ++j) + tga_data[i*tga_comp+j] = raw_data[j]; + + // in case we're in RLE mode, keep counting down + --RLE_count; + } + // do I need to invert the image? + if ( tga_inverted ) + { + for (j = 0; j*2 < tga_height; ++j) + { + int index1 = j * tga_width * tga_comp; + int index2 = (tga_height - 1 - j) * tga_width * tga_comp; + for (i = tga_width * tga_comp; i > 0; --i) + { + unsigned char temp = tga_data[index1]; + tga_data[index1] = tga_data[index2]; + tga_data[index2] = temp; + ++index1; + ++index2; + } + } + } + // clear my palette, if I had one + if ( tga_palette != NULL ) + { + STBI_FREE( tga_palette ); + } + } + + // swap RGB - if the source data was RGB16, it already is in the right order + if (tga_comp >= 3 && !tga_rgb16) + { + unsigned char* tga_pixel = tga_data; + for (i=0; i < tga_width * tga_height; ++i) + { + unsigned char temp = tga_pixel[0]; + tga_pixel[0] = tga_pixel[2]; + tga_pixel[2] = temp; + tga_pixel += tga_comp; + } + } + + // convert to target component count + if (req_comp && req_comp != tga_comp) + tga_data = stbi__convert_format(tga_data, tga_comp, req_comp, tga_width, tga_height); + + // the things I do to get rid of an error message, and yet keep + // Microsoft's C compilers happy... [8^( + tga_palette_start = tga_palette_len = tga_palette_bits = + tga_x_origin = tga_y_origin = 0; + // OK, done + return tga_data; +} +#endif + +// ************************************************************************************************* +// Photoshop PSD loader -- PD by Thatcher Ulrich, integration by Nicolas Schulz, tweaked by STB + +#ifndef STBI_NO_PSD +static int stbi__psd_test(stbi__context *s) +{ + int r = (stbi__get32be(s) == 0x38425053); + stbi__rewind(s); + return r; +} + +static int stbi__psd_decode_rle(stbi__context *s, stbi_uc *p, int pixelCount) +{ + int count, nleft, len; + + count = 0; + while ((nleft = pixelCount - count) > 0) { + len = stbi__get8(s); + if (len == 128) { + // No-op. + } else if (len < 128) { + // Copy next len+1 bytes literally. + len++; + if (len > nleft) return 0; // corrupt data + count += len; + while (len) { + *p = stbi__get8(s); + p += 4; + len--; + } + } else if (len > 128) { + stbi_uc val; + // Next -len+1 bytes in the dest are replicated from next source byte. + // (Interpret len as a negative 8-bit int.) + len = 257 - len; + if (len > nleft) return 0; // corrupt data + val = stbi__get8(s); + count += len; + while (len) { + *p = val; + p += 4; + len--; + } + } + } + + return 1; +} + +static void *stbi__psd_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri, int bpc) +{ + int pixelCount; + int channelCount, compression; + int channel, i; + int bitdepth; + int w,h; + stbi_uc *out; + STBI_NOTUSED(ri); + + // Check identifier + if (stbi__get32be(s) != 0x38425053) // "8BPS" + return stbi__errpuc("not PSD", "Corrupt PSD image"); + + // Check file type version. + if (stbi__get16be(s) != 1) + return stbi__errpuc("wrong version", "Unsupported version of PSD image"); + + // Skip 6 reserved bytes. + stbi__skip(s, 6 ); + + // Read the number of channels (R, G, B, A, etc). + channelCount = stbi__get16be(s); + if (channelCount < 0 || channelCount > 16) + return stbi__errpuc("wrong channel count", "Unsupported number of channels in PSD image"); + + // Read the rows and columns of the image. + h = stbi__get32be(s); + w = stbi__get32be(s); + + // Make sure the depth is 8 bits. + bitdepth = stbi__get16be(s); + if (bitdepth != 8 && bitdepth != 16) + return stbi__errpuc("unsupported bit depth", "PSD bit depth is not 8 or 16 bit"); + + // Make sure the color mode is RGB. + // Valid options are: + // 0: Bitmap + // 1: Grayscale + // 2: Indexed color + // 3: RGB color + // 4: CMYK color + // 7: Multichannel + // 8: Duotone + // 9: Lab color + if (stbi__get16be(s) != 3) + return stbi__errpuc("wrong color format", "PSD is not in RGB color format"); + + // Skip the Mode Data. (It's the palette for indexed color; other info for other modes.) + stbi__skip(s,stbi__get32be(s) ); + + // Skip the image resources. (resolution, pen tool paths, etc) + stbi__skip(s, stbi__get32be(s) ); + + // Skip the reserved data. + stbi__skip(s, stbi__get32be(s) ); + + // Find out if the data is compressed. + // Known values: + // 0: no compression + // 1: RLE compressed + compression = stbi__get16be(s); + if (compression > 1) + return stbi__errpuc("bad compression", "PSD has an unknown compression format"); + + // Check size + if (!stbi__mad3sizes_valid(4, w, h, 0)) + return stbi__errpuc("too large", "Corrupt PSD"); + + // Create the destination image. + + if (!compression && bitdepth == 16 && bpc == 16) { + out = (stbi_uc *) stbi__malloc_mad3(8, w, h, 0); + ri->bits_per_channel = 16; + } else + out = (stbi_uc *) stbi__malloc(4 * w*h); + + if (!out) return stbi__errpuc("outofmem", "Out of memory"); + pixelCount = w*h; + + // Initialize the data to zero. + //memset( out, 0, pixelCount * 4 ); + + // Finally, the image data. + if (compression) { + // RLE as used by .PSD and .TIFF + // Loop until you get the number of unpacked bytes you are expecting: + // Read the next source byte into n. + // If n is between 0 and 127 inclusive, copy the next n+1 bytes literally. + // Else if n is between -127 and -1 inclusive, copy the next byte -n+1 times. + // Else if n is 128, noop. + // Endloop + + // The RLE-compressed data is preceeded by a 2-byte data count for each row in the data, + // which we're going to just skip. + stbi__skip(s, h * channelCount * 2 ); + + // Read the RLE data by channel. + for (channel = 0; channel < 4; channel++) { + stbi_uc *p; + + p = out+channel; + if (channel >= channelCount) { + // Fill this channel with default data. + for (i = 0; i < pixelCount; i++, p += 4) + *p = (channel == 3 ? 255 : 0); + } else { + // Read the RLE data. + if (!stbi__psd_decode_rle(s, p, pixelCount)) { + STBI_FREE(out); + return stbi__errpuc("corrupt", "bad RLE data"); + } + } + } + + } else { + // We're at the raw image data. It's each channel in order (Red, Green, Blue, Alpha, ...) + // where each channel consists of an 8-bit (or 16-bit) value for each pixel in the image. + + // Read the data by channel. + for (channel = 0; channel < 4; channel++) { + if (channel >= channelCount) { + // Fill this channel with default data. + if (bitdepth == 16 && bpc == 16) { + stbi__uint16 *q = ((stbi__uint16 *) out) + channel; + stbi__uint16 val = channel == 3 ? 65535 : 0; + for (i = 0; i < pixelCount; i++, q += 4) + *q = val; + } else { + stbi_uc *p = out+channel; + stbi_uc val = channel == 3 ? 255 : 0; + for (i = 0; i < pixelCount; i++, p += 4) + *p = val; + } + } else { + if (ri->bits_per_channel == 16) { // output bpc + stbi__uint16 *q = ((stbi__uint16 *) out) + channel; + for (i = 0; i < pixelCount; i++, q += 4) + *q = (stbi__uint16) stbi__get16be(s); + } else { + stbi_uc *p = out+channel; + if (bitdepth == 16) { // input bpc + for (i = 0; i < pixelCount; i++, p += 4) + *p = (stbi_uc) (stbi__get16be(s) >> 8); + } else { + for (i = 0; i < pixelCount; i++, p += 4) + *p = stbi__get8(s); + } + } + } + } + } + + // remove weird white matte from PSD + if (channelCount >= 4) { + if (ri->bits_per_channel == 16) { + for (i=0; i < w*h; ++i) { + stbi__uint16 *pixel = (stbi__uint16 *) out + 4*i; + if (pixel[3] != 0 && pixel[3] != 65535) { + float a = pixel[3] / 65535.0f; + float ra = 1.0f / a; + float inv_a = 65535.0f * (1 - ra); + pixel[0] = (stbi__uint16) (pixel[0]*ra + inv_a); + pixel[1] = (stbi__uint16) (pixel[1]*ra + inv_a); + pixel[2] = (stbi__uint16) (pixel[2]*ra + inv_a); + } + } + } else { + for (i=0; i < w*h; ++i) { + unsigned char *pixel = out + 4*i; + if (pixel[3] != 0 && pixel[3] != 255) { + float a = pixel[3] / 255.0f; + float ra = 1.0f / a; + float inv_a = 255.0f * (1 - ra); + pixel[0] = (unsigned char) (pixel[0]*ra + inv_a); + pixel[1] = (unsigned char) (pixel[1]*ra + inv_a); + pixel[2] = (unsigned char) (pixel[2]*ra + inv_a); + } + } + } + } + + // convert to desired output format + if (req_comp && req_comp != 4) { + if (ri->bits_per_channel == 16) + out = (stbi_uc *) stbi__convert_format16((stbi__uint16 *) out, 4, req_comp, w, h); + else + out = stbi__convert_format(out, 4, req_comp, w, h); + if (out == NULL) return out; // stbi__convert_format frees input on failure + } + + if (comp) *comp = 4; + *y = h; + *x = w; + + return out; +} +#endif + +// ************************************************************************************************* +// Softimage PIC loader +// by Tom Seddon +// +// See http://softimage.wiki.softimage.com/index.php/INFO:_PIC_file_format +// See http://ozviz.wasp.uwa.edu.au/~pbourke/dataformats/softimagepic/ + +#ifndef STBI_NO_PIC +static int stbi__pic_is4(stbi__context *s,const char *str) +{ + int i; + for (i=0; i<4; ++i) + if (stbi__get8(s) != (stbi_uc)str[i]) + return 0; + + return 1; +} + +static int stbi__pic_test_core(stbi__context *s) +{ + int i; + + if (!stbi__pic_is4(s,"\x53\x80\xF6\x34")) + return 0; + + for(i=0;i<84;++i) + stbi__get8(s); + + if (!stbi__pic_is4(s,"PICT")) + return 0; + + return 1; +} + +typedef struct +{ + stbi_uc size,type,channel; +} stbi__pic_packet; + +static stbi_uc *stbi__readval(stbi__context *s, int channel, stbi_uc *dest) +{ + int mask=0x80, i; + + for (i=0; i<4; ++i, mask>>=1) { + if (channel & mask) { + if (stbi__at_eof(s)) return stbi__errpuc("bad file","PIC file too short"); + dest[i]=stbi__get8(s); + } + } + + return dest; +} + +static void stbi__copyval(int channel,stbi_uc *dest,const stbi_uc *src) +{ + int mask=0x80,i; + + for (i=0;i<4; ++i, mask>>=1) + if (channel&mask) + dest[i]=src[i]; +} + +static stbi_uc *stbi__pic_load_core(stbi__context *s,int width,int height,int *comp, stbi_uc *result) +{ + int act_comp=0,num_packets=0,y,chained; + stbi__pic_packet packets[10]; + + // this will (should...) cater for even some bizarre stuff like having data + // for the same channel in multiple packets. + do { + stbi__pic_packet *packet; + + if (num_packets==sizeof(packets)/sizeof(packets[0])) + return stbi__errpuc("bad format","too many packets"); + + packet = &packets[num_packets++]; + + chained = stbi__get8(s); + packet->size = stbi__get8(s); + packet->type = stbi__get8(s); + packet->channel = stbi__get8(s); + + act_comp |= packet->channel; + + if (stbi__at_eof(s)) return stbi__errpuc("bad file","file too short (reading packets)"); + if (packet->size != 8) return stbi__errpuc("bad format","packet isn't 8bpp"); + } while (chained); + + *comp = (act_comp & 0x10 ? 4 : 3); // has alpha channel? + + for(y=0; ytype) { + default: + return stbi__errpuc("bad format","packet has bad compression type"); + + case 0: {//uncompressed + int x; + + for(x=0;xchannel,dest)) + return 0; + break; + } + + case 1://Pure RLE + { + int left=width, i; + + while (left>0) { + stbi_uc count,value[4]; + + count=stbi__get8(s); + if (stbi__at_eof(s)) return stbi__errpuc("bad file","file too short (pure read count)"); + + if (count > left) + count = (stbi_uc) left; + + if (!stbi__readval(s,packet->channel,value)) return 0; + + for(i=0; ichannel,dest,value); + left -= count; + } + } + break; + + case 2: {//Mixed RLE + int left=width; + while (left>0) { + int count = stbi__get8(s), i; + if (stbi__at_eof(s)) return stbi__errpuc("bad file","file too short (mixed read count)"); + + if (count >= 128) { // Repeated + stbi_uc value[4]; + + if (count==128) + count = stbi__get16be(s); + else + count -= 127; + if (count > left) + return stbi__errpuc("bad file","scanline overrun"); + + if (!stbi__readval(s,packet->channel,value)) + return 0; + + for(i=0;ichannel,dest,value); + } else { // Raw + ++count; + if (count>left) return stbi__errpuc("bad file","scanline overrun"); + + for(i=0;ichannel,dest)) + return 0; + } + left-=count; + } + break; + } + } + } + } + + return result; +} + +static void *stbi__pic_load(stbi__context *s,int *px,int *py,int *comp,int req_comp, stbi__result_info *ri) +{ + stbi_uc *result; + int i, x,y; + STBI_NOTUSED(ri); + + for (i=0; i<92; ++i) + stbi__get8(s); + + x = stbi__get16be(s); + y = stbi__get16be(s); + if (stbi__at_eof(s)) return stbi__errpuc("bad file","file too short (pic header)"); + if (!stbi__mad3sizes_valid(x, y, 4, 0)) return stbi__errpuc("too large", "PIC image too large to decode"); + + stbi__get32be(s); //skip `ratio' + stbi__get16be(s); //skip `fields' + stbi__get16be(s); //skip `pad' + + // intermediate buffer is RGBA + result = (stbi_uc *) stbi__malloc_mad3(x, y, 4, 0); + memset(result, 0xff, x*y*4); + + if (!stbi__pic_load_core(s,x,y,comp, result)) { + STBI_FREE(result); + result=0; + } + *px = x; + *py = y; + if (req_comp == 0) req_comp = *comp; + result=stbi__convert_format(result,4,req_comp,x,y); + + return result; +} + +static int stbi__pic_test(stbi__context *s) +{ + int r = stbi__pic_test_core(s); + stbi__rewind(s); + return r; +} +#endif + +// ************************************************************************************************* +// GIF loader -- public domain by Jean-Marc Lienher -- simplified/shrunk by stb + +#ifndef STBI_NO_GIF +typedef struct +{ + stbi__int16 prefix; + stbi_uc first; + stbi_uc suffix; +} stbi__gif_lzw; + +typedef struct +{ + int w,h; + stbi_uc *out, *old_out; // output buffer (always 4 components) + int flags, bgindex, ratio, transparent, eflags, delay; + stbi_uc pal[256][4]; + stbi_uc lpal[256][4]; + stbi__gif_lzw codes[4096]; + stbi_uc *color_table; + int parse, step; + int lflags; + int start_x, start_y; + int max_x, max_y; + int cur_x, cur_y; + int line_size; +} stbi__gif; + +static int stbi__gif_test_raw(stbi__context *s) +{ + int sz; + if (stbi__get8(s) != 'G' || stbi__get8(s) != 'I' || stbi__get8(s) != 'F' || stbi__get8(s) != '8') return 0; + sz = stbi__get8(s); + if (sz != '9' && sz != '7') return 0; + if (stbi__get8(s) != 'a') return 0; + return 1; +} + +static int stbi__gif_test(stbi__context *s) +{ + int r = stbi__gif_test_raw(s); + stbi__rewind(s); + return r; +} + +static void stbi__gif_parse_colortable(stbi__context *s, stbi_uc pal[256][4], int num_entries, int transp) +{ + int i; + for (i=0; i < num_entries; ++i) { + pal[i][2] = stbi__get8(s); + pal[i][1] = stbi__get8(s); + pal[i][0] = stbi__get8(s); + pal[i][3] = transp == i ? 0 : 255; + } +} + +static int stbi__gif_header(stbi__context *s, stbi__gif *g, int *comp, int is_info) +{ + stbi_uc version; + if (stbi__get8(s) != 'G' || stbi__get8(s) != 'I' || stbi__get8(s) != 'F' || stbi__get8(s) != '8') + return stbi__err("not GIF", "Corrupt GIF"); + + version = stbi__get8(s); + if (version != '7' && version != '9') return stbi__err("not GIF", "Corrupt GIF"); + if (stbi__get8(s) != 'a') return stbi__err("not GIF", "Corrupt GIF"); + + stbi__g_failure_reason = ""; + g->w = stbi__get16le(s); + g->h = stbi__get16le(s); + g->flags = stbi__get8(s); + g->bgindex = stbi__get8(s); + g->ratio = stbi__get8(s); + g->transparent = -1; + + if (comp != 0) *comp = 4; // can't actually tell whether it's 3 or 4 until we parse the comments + + if (is_info) return 1; + + if (g->flags & 0x80) + stbi__gif_parse_colortable(s,g->pal, 2 << (g->flags & 7), -1); + + return 1; +} + +static int stbi__gif_info_raw(stbi__context *s, int *x, int *y, int *comp) +{ + stbi__gif* g = (stbi__gif*) stbi__malloc(sizeof(stbi__gif)); + if (!stbi__gif_header(s, g, comp, 1)) { + STBI_FREE(g); + stbi__rewind( s ); + return 0; + } + if (x) *x = g->w; + if (y) *y = g->h; + STBI_FREE(g); + return 1; +} + +static void stbi__out_gif_code(stbi__gif *g, stbi__uint16 code) +{ + stbi_uc *p, *c; + + // recurse to decode the prefixes, since the linked-list is backwards, + // and working backwards through an interleaved image would be nasty + if (g->codes[code].prefix >= 0) + stbi__out_gif_code(g, g->codes[code].prefix); + + if (g->cur_y >= g->max_y) return; + + p = &g->out[g->cur_x + g->cur_y]; + c = &g->color_table[g->codes[code].suffix * 4]; + + if (c[3] >= 128) { + p[0] = c[2]; + p[1] = c[1]; + p[2] = c[0]; + p[3] = c[3]; + } + g->cur_x += 4; + + if (g->cur_x >= g->max_x) { + g->cur_x = g->start_x; + g->cur_y += g->step; + + while (g->cur_y >= g->max_y && g->parse > 0) { + g->step = (1 << g->parse) * g->line_size; + g->cur_y = g->start_y + (g->step >> 1); + --g->parse; + } + } +} + +static stbi_uc *stbi__process_gif_raster(stbi__context *s, stbi__gif *g) +{ + stbi_uc lzw_cs; + stbi__int32 len, init_code; + stbi__uint32 first; + stbi__int32 codesize, codemask, avail, oldcode, bits, valid_bits, clear; + stbi__gif_lzw *p; + + lzw_cs = stbi__get8(s); + if (lzw_cs > 12) return NULL; + clear = 1 << lzw_cs; + first = 1; + codesize = lzw_cs + 1; + codemask = (1 << codesize) - 1; + bits = 0; + valid_bits = 0; + for (init_code = 0; init_code < clear; init_code++) { + g->codes[init_code].prefix = -1; + g->codes[init_code].first = (stbi_uc) init_code; + g->codes[init_code].suffix = (stbi_uc) init_code; + } + + // support no starting clear code + avail = clear+2; + oldcode = -1; + + len = 0; + for(;;) { + if (valid_bits < codesize) { + if (len == 0) { + len = stbi__get8(s); // start new block + if (len == 0) + return g->out; + } + --len; + bits |= (stbi__int32) stbi__get8(s) << valid_bits; + valid_bits += 8; + } else { + stbi__int32 code = bits & codemask; + bits >>= codesize; + valid_bits -= codesize; + // @OPTIMIZE: is there some way we can accelerate the non-clear path? + if (code == clear) { // clear code + codesize = lzw_cs + 1; + codemask = (1 << codesize) - 1; + avail = clear + 2; + oldcode = -1; + first = 0; + } else if (code == clear + 1) { // end of stream code + stbi__skip(s, len); + while ((len = stbi__get8(s)) > 0) + stbi__skip(s,len); + return g->out; + } else if (code <= avail) { + if (first) return stbi__errpuc("no clear code", "Corrupt GIF"); + + if (oldcode >= 0) { + p = &g->codes[avail++]; + if (avail > 4096) return stbi__errpuc("too many codes", "Corrupt GIF"); + p->prefix = (stbi__int16) oldcode; + p->first = g->codes[oldcode].first; + p->suffix = (code == avail) ? p->first : g->codes[code].first; + } else if (code == avail) + return stbi__errpuc("illegal code in raster", "Corrupt GIF"); + + stbi__out_gif_code(g, (stbi__uint16) code); + + if ((avail & codemask) == 0 && avail <= 0x0FFF) { + codesize++; + codemask = (1 << codesize) - 1; + } + + oldcode = code; + } else { + return stbi__errpuc("illegal code in raster", "Corrupt GIF"); + } + } + } +} + +static void stbi__fill_gif_background(stbi__gif *g, int x0, int y0, int x1, int y1) +{ + int x, y; + stbi_uc *c = g->pal[g->bgindex]; + for (y = y0; y < y1; y += 4 * g->w) { + for (x = x0; x < x1; x += 4) { + stbi_uc *p = &g->out[y + x]; + p[0] = c[2]; + p[1] = c[1]; + p[2] = c[0]; + p[3] = 0; + } + } +} + +// this function is designed to support animated gifs, although stb_image doesn't support it +static stbi_uc *stbi__gif_load_next(stbi__context *s, stbi__gif *g, int *comp, int req_comp) +{ + int i; + stbi_uc *prev_out = 0; + + if (g->out == 0 && !stbi__gif_header(s, g, comp,0)) + return 0; // stbi__g_failure_reason set by stbi__gif_header + + if (!stbi__mad3sizes_valid(g->w, g->h, 4, 0)) + return stbi__errpuc("too large", "GIF too large"); + + prev_out = g->out; + g->out = (stbi_uc *) stbi__malloc_mad3(4, g->w, g->h, 0); + if (g->out == 0) return stbi__errpuc("outofmem", "Out of memory"); + + switch ((g->eflags & 0x1C) >> 2) { + case 0: // unspecified (also always used on 1st frame) + stbi__fill_gif_background(g, 0, 0, 4 * g->w, 4 * g->w * g->h); + break; + case 1: // do not dispose + if (prev_out) memcpy(g->out, prev_out, 4 * g->w * g->h); + g->old_out = prev_out; + break; + case 2: // dispose to background + if (prev_out) memcpy(g->out, prev_out, 4 * g->w * g->h); + stbi__fill_gif_background(g, g->start_x, g->start_y, g->max_x, g->max_y); + break; + case 3: // dispose to previous + if (g->old_out) { + for (i = g->start_y; i < g->max_y; i += 4 * g->w) + memcpy(&g->out[i + g->start_x], &g->old_out[i + g->start_x], g->max_x - g->start_x); + } + break; + } + + for (;;) { + switch (stbi__get8(s)) { + case 0x2C: /* Image Descriptor */ + { + int prev_trans = -1; + stbi__int32 x, y, w, h; + stbi_uc *o; + + x = stbi__get16le(s); + y = stbi__get16le(s); + w = stbi__get16le(s); + h = stbi__get16le(s); + if (((x + w) > (g->w)) || ((y + h) > (g->h))) + return stbi__errpuc("bad Image Descriptor", "Corrupt GIF"); + + g->line_size = g->w * 4; + g->start_x = x * 4; + g->start_y = y * g->line_size; + g->max_x = g->start_x + w * 4; + g->max_y = g->start_y + h * g->line_size; + g->cur_x = g->start_x; + g->cur_y = g->start_y; + + g->lflags = stbi__get8(s); + + if (g->lflags & 0x40) { + g->step = 8 * g->line_size; // first interlaced spacing + g->parse = 3; + } else { + g->step = g->line_size; + g->parse = 0; + } + + if (g->lflags & 0x80) { + stbi__gif_parse_colortable(s,g->lpal, 2 << (g->lflags & 7), g->eflags & 0x01 ? g->transparent : -1); + g->color_table = (stbi_uc *) g->lpal; + } else if (g->flags & 0x80) { + if (g->transparent >= 0 && (g->eflags & 0x01)) { + prev_trans = g->pal[g->transparent][3]; + g->pal[g->transparent][3] = 0; + } + g->color_table = (stbi_uc *) g->pal; + } else + return stbi__errpuc("missing color table", "Corrupt GIF"); + + o = stbi__process_gif_raster(s, g); + if (o == NULL) return NULL; + + if (prev_trans != -1) + g->pal[g->transparent][3] = (stbi_uc) prev_trans; + + return o; + } + + case 0x21: // Comment Extension. + { + int len; + if (stbi__get8(s) == 0xF9) { // Graphic Control Extension. + len = stbi__get8(s); + if (len == 4) { + g->eflags = stbi__get8(s); + g->delay = stbi__get16le(s); + g->transparent = stbi__get8(s); + } else { + stbi__skip(s, len); + break; + } + } + while ((len = stbi__get8(s)) != 0) + stbi__skip(s, len); + break; + } + + case 0x3B: // gif stream termination code + return (stbi_uc *) s; // using '1' causes warning on some compilers + + default: + return stbi__errpuc("unknown code", "Corrupt GIF"); + } + } + + STBI_NOTUSED(req_comp); +} + +static void *stbi__gif_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + stbi_uc *u = 0; + stbi__gif* g = (stbi__gif*) stbi__malloc(sizeof(stbi__gif)); + memset(g, 0, sizeof(*g)); + STBI_NOTUSED(ri); + + u = stbi__gif_load_next(s, g, comp, req_comp); + if (u == (stbi_uc *) s) u = 0; // end of animated gif marker + if (u) { + *x = g->w; + *y = g->h; + if (req_comp && req_comp != 4) + u = stbi__convert_format(u, 4, req_comp, g->w, g->h); + } + else if (g->out) + STBI_FREE(g->out); + STBI_FREE(g); + return u; +} + +static int stbi__gif_info(stbi__context *s, int *x, int *y, int *comp) +{ + return stbi__gif_info_raw(s,x,y,comp); +} +#endif + +// ************************************************************************************************* +// Radiance RGBE HDR loader +// originally by Nicolas Schulz +#ifndef STBI_NO_HDR +static int stbi__hdr_test_core(stbi__context *s, const char *signature) +{ + int i; + for (i=0; signature[i]; ++i) + if (stbi__get8(s) != signature[i]) + return 0; + stbi__rewind(s); + return 1; +} + +static int stbi__hdr_test(stbi__context* s) +{ + int r = stbi__hdr_test_core(s, "#?RADIANCE\n"); + stbi__rewind(s); + if(!r) { + r = stbi__hdr_test_core(s, "#?RGBE\n"); + stbi__rewind(s); + } + return r; +} + +#define STBI__HDR_BUFLEN 1024 +static char *stbi__hdr_gettoken(stbi__context *z, char *buffer) +{ + int len=0; + char c = '\0'; + + c = (char) stbi__get8(z); + + while (!stbi__at_eof(z) && c != '\n') { + buffer[len++] = c; + if (len == STBI__HDR_BUFLEN-1) { + // flush to end of line + while (!stbi__at_eof(z) && stbi__get8(z) != '\n') + ; + break; + } + c = (char) stbi__get8(z); + } + + buffer[len] = 0; + return buffer; +} + +static void stbi__hdr_convert(float *output, stbi_uc *input, int req_comp) +{ + if ( input[3] != 0 ) { + float f1; + // Exponent + f1 = (float) ldexp(1.0f, input[3] - (int)(128 + 8)); + if (req_comp <= 2) + output[0] = (input[0] + input[1] + input[2]) * f1 / 3; + else { + output[0] = input[0] * f1; + output[1] = input[1] * f1; + output[2] = input[2] * f1; + } + if (req_comp == 2) output[1] = 1; + if (req_comp == 4) output[3] = 1; + } else { + switch (req_comp) { + case 4: output[3] = 1; /* fallthrough */ + case 3: output[0] = output[1] = output[2] = 0; + break; + case 2: output[1] = 1; /* fallthrough */ + case 1: output[0] = 0; + break; + } + } +} + +static float *stbi__hdr_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + char buffer[STBI__HDR_BUFLEN]; + char *token; + int valid = 0; + int width, height; + stbi_uc *scanline; + float *hdr_data; + int len; + unsigned char count, value; + int i, j, k, c1,c2, z; + const char *headerToken; + STBI_NOTUSED(ri); + + // Check identifier + headerToken = stbi__hdr_gettoken(s,buffer); + if (strcmp(headerToken, "#?RADIANCE") != 0 && strcmp(headerToken, "#?RGBE") != 0) + return stbi__errpf("not HDR", "Corrupt HDR image"); + + // Parse header + for(;;) { + token = stbi__hdr_gettoken(s,buffer); + if (token[0] == 0) break; + if (strcmp(token, "FORMAT=32-bit_rle_rgbe") == 0) valid = 1; + } + + if (!valid) return stbi__errpf("unsupported format", "Unsupported HDR format"); + + // Parse width and height + // can't use sscanf() if we're not using stdio! + token = stbi__hdr_gettoken(s,buffer); + if (strncmp(token, "-Y ", 3)) return stbi__errpf("unsupported data layout", "Unsupported HDR format"); + token += 3; + height = (int) strtol(token, &token, 10); + while (*token == ' ') ++token; + if (strncmp(token, "+X ", 3)) return stbi__errpf("unsupported data layout", "Unsupported HDR format"); + token += 3; + width = (int) strtol(token, NULL, 10); + + *x = width; + *y = height; + + if (comp) *comp = 3; + if (req_comp == 0) req_comp = 3; + + if (!stbi__mad4sizes_valid(width, height, req_comp, sizeof(float), 0)) + return stbi__errpf("too large", "HDR image is too large"); + + // Read data + hdr_data = (float *) stbi__malloc_mad4(width, height, req_comp, sizeof(float), 0); + if (!hdr_data) + return stbi__errpf("outofmem", "Out of memory"); + + // Load image data + // image data is stored as some number of sca + if ( width < 8 || width >= 32768) { + // Read flat data + for (j=0; j < height; ++j) { + for (i=0; i < width; ++i) { + stbi_uc rgbe[4]; + main_decode_loop: + stbi__getn(s, rgbe, 4); + stbi__hdr_convert(hdr_data + j * width * req_comp + i * req_comp, rgbe, req_comp); + } + } + } else { + // Read RLE-encoded data + scanline = NULL; + + for (j = 0; j < height; ++j) { + c1 = stbi__get8(s); + c2 = stbi__get8(s); + len = stbi__get8(s); + if (c1 != 2 || c2 != 2 || (len & 0x80)) { + // not run-length encoded, so we have to actually use THIS data as a decoded + // pixel (note this can't be a valid pixel--one of RGB must be >= 128) + stbi_uc rgbe[4]; + rgbe[0] = (stbi_uc) c1; + rgbe[1] = (stbi_uc) c2; + rgbe[2] = (stbi_uc) len; + rgbe[3] = (stbi_uc) stbi__get8(s); + stbi__hdr_convert(hdr_data, rgbe, req_comp); + i = 1; + j = 0; + STBI_FREE(scanline); + goto main_decode_loop; // yes, this makes no sense + } + len <<= 8; + len |= stbi__get8(s); + if (len != width) { STBI_FREE(hdr_data); STBI_FREE(scanline); return stbi__errpf("invalid decoded scanline length", "corrupt HDR"); } + if (scanline == NULL) { + scanline = (stbi_uc *) stbi__malloc_mad2(width, 4, 0); + if (!scanline) { + STBI_FREE(hdr_data); + return stbi__errpf("outofmem", "Out of memory"); + } + } + + for (k = 0; k < 4; ++k) { + int nleft; + i = 0; + while ((nleft = width - i) > 0) { + count = stbi__get8(s); + if (count > 128) { + // Run + value = stbi__get8(s); + count -= 128; + if (count > nleft) { STBI_FREE(hdr_data); STBI_FREE(scanline); return stbi__errpf("corrupt", "bad RLE data in HDR"); } + for (z = 0; z < count; ++z) + scanline[i++ * 4 + k] = value; + } else { + // Dump + if (count > nleft) { STBI_FREE(hdr_data); STBI_FREE(scanline); return stbi__errpf("corrupt", "bad RLE data in HDR"); } + for (z = 0; z < count; ++z) + scanline[i++ * 4 + k] = stbi__get8(s); + } + } + } + for (i=0; i < width; ++i) + stbi__hdr_convert(hdr_data+(j*width + i)*req_comp, scanline + i*4, req_comp); + } + if (scanline) + STBI_FREE(scanline); + } + + return hdr_data; +} + +static int stbi__hdr_info(stbi__context *s, int *x, int *y, int *comp) +{ + char buffer[STBI__HDR_BUFLEN]; + char *token; + int valid = 0; + + if (stbi__hdr_test(s) == 0) { + stbi__rewind( s ); + return 0; + } + + for(;;) { + token = stbi__hdr_gettoken(s,buffer); + if (token[0] == 0) break; + if (strcmp(token, "FORMAT=32-bit_rle_rgbe") == 0) valid = 1; + } + + if (!valid) { + stbi__rewind( s ); + return 0; + } + token = stbi__hdr_gettoken(s,buffer); + if (strncmp(token, "-Y ", 3)) { + stbi__rewind( s ); + return 0; + } + token += 3; + *y = (int) strtol(token, &token, 10); + while (*token == ' ') ++token; + if (strncmp(token, "+X ", 3)) { + stbi__rewind( s ); + return 0; + } + token += 3; + *x = (int) strtol(token, NULL, 10); + *comp = 3; + return 1; +} +#endif // STBI_NO_HDR + +#ifndef STBI_NO_BMP +static int stbi__bmp_info(stbi__context *s, int *x, int *y, int *comp) +{ + void *p; + stbi__bmp_data info; + + info.all_a = 255; + p = stbi__bmp_parse_header(s, &info); + stbi__rewind( s ); + if (p == NULL) + return 0; + *x = s->img_x; + *y = s->img_y; + *comp = info.ma ? 4 : 3; + return 1; +} +#endif + +#ifndef STBI_NO_PSD +static int stbi__psd_info(stbi__context *s, int *x, int *y, int *comp) +{ + int channelCount; + if (stbi__get32be(s) != 0x38425053) { + stbi__rewind( s ); + return 0; + } + if (stbi__get16be(s) != 1) { + stbi__rewind( s ); + return 0; + } + stbi__skip(s, 6); + channelCount = stbi__get16be(s); + if (channelCount < 0 || channelCount > 16) { + stbi__rewind( s ); + return 0; + } + *y = stbi__get32be(s); + *x = stbi__get32be(s); + if (stbi__get16be(s) != 8) { + stbi__rewind( s ); + return 0; + } + if (stbi__get16be(s) != 3) { + stbi__rewind( s ); + return 0; + } + *comp = 4; + return 1; +} +#endif + +#ifndef STBI_NO_PIC +static int stbi__pic_info(stbi__context *s, int *x, int *y, int *comp) +{ + int act_comp=0,num_packets=0,chained; + stbi__pic_packet packets[10]; + + if (!stbi__pic_is4(s,"\x53\x80\xF6\x34")) { + stbi__rewind(s); + return 0; + } + + stbi__skip(s, 88); + + *x = stbi__get16be(s); + *y = stbi__get16be(s); + if (stbi__at_eof(s)) { + stbi__rewind( s); + return 0; + } + if ( (*x) != 0 && (1 << 28) / (*x) < (*y)) { + stbi__rewind( s ); + return 0; + } + + stbi__skip(s, 8); + + do { + stbi__pic_packet *packet; + + if (num_packets==sizeof(packets)/sizeof(packets[0])) + return 0; + + packet = &packets[num_packets++]; + chained = stbi__get8(s); + packet->size = stbi__get8(s); + packet->type = stbi__get8(s); + packet->channel = stbi__get8(s); + act_comp |= packet->channel; + + if (stbi__at_eof(s)) { + stbi__rewind( s ); + return 0; + } + if (packet->size != 8) { + stbi__rewind( s ); + return 0; + } + } while (chained); + + *comp = (act_comp & 0x10 ? 4 : 3); + + return 1; +} +#endif + +// ************************************************************************************************* +// Portable Gray Map and Portable Pixel Map loader +// by Ken Miller +// +// PGM: http://netpbm.sourceforge.net/doc/pgm.html +// PPM: http://netpbm.sourceforge.net/doc/ppm.html +// +// Known limitations: +// Does not support comments in the header section +// Does not support ASCII image data (formats P2 and P3) +// Does not support 16-bit-per-channel + +#ifndef STBI_NO_PNM + +static int stbi__pnm_test(stbi__context *s) +{ + char p, t; + p = (char) stbi__get8(s); + t = (char) stbi__get8(s); + if (p != 'P' || (t != '5' && t != '6')) { + stbi__rewind( s ); + return 0; + } + return 1; +} + +static void *stbi__pnm_load(stbi__context *s, int *x, int *y, int *comp, int req_comp, stbi__result_info *ri) +{ + stbi_uc *out; + STBI_NOTUSED(ri); + + if (!stbi__pnm_info(s, (int *)&s->img_x, (int *)&s->img_y, (int *)&s->img_n)) + return 0; + + *x = s->img_x; + *y = s->img_y; + *comp = s->img_n; + + if (!stbi__mad3sizes_valid(s->img_n, s->img_x, s->img_y, 0)) + return stbi__errpuc("too large", "PNM too large"); + + out = (stbi_uc *) stbi__malloc_mad3(s->img_n, s->img_x, s->img_y, 0); + if (!out) return stbi__errpuc("outofmem", "Out of memory"); + stbi__getn(s, out, s->img_n * s->img_x * s->img_y); + + if (req_comp && req_comp != s->img_n) { + out = stbi__convert_format(out, s->img_n, req_comp, s->img_x, s->img_y); + if (out == NULL) return out; // stbi__convert_format frees input on failure + } + return out; +} + +static int stbi__pnm_isspace(char c) +{ + return c == ' ' || c == '\t' || c == '\n' || c == '\v' || c == '\f' || c == '\r'; +} + +static void stbi__pnm_skip_whitespace(stbi__context *s, char *c) +{ + for (;;) { + while (!stbi__at_eof(s) && stbi__pnm_isspace(*c)) + *c = (char) stbi__get8(s); + + if (stbi__at_eof(s) || *c != '#') + break; + + while (!stbi__at_eof(s) && *c != '\n' && *c != '\r' ) + *c = (char) stbi__get8(s); + } +} + +static int stbi__pnm_isdigit(char c) +{ + return c >= '0' && c <= '9'; +} + +static int stbi__pnm_getinteger(stbi__context *s, char *c) +{ + int value = 0; + + while (!stbi__at_eof(s) && stbi__pnm_isdigit(*c)) { + value = value*10 + (*c - '0'); + *c = (char) stbi__get8(s); + } + + return value; +} + +static int stbi__pnm_info(stbi__context *s, int *x, int *y, int *comp) +{ + int maxv; + char c, p, t; + + stbi__rewind( s ); + + // Get identifier + p = (char) stbi__get8(s); + t = (char) stbi__get8(s); + if (p != 'P' || (t != '5' && t != '6')) { + stbi__rewind( s ); + return 0; + } + + *comp = (t == '6') ? 3 : 1; // '5' is 1-component .pgm; '6' is 3-component .ppm + + c = (char) stbi__get8(s); + stbi__pnm_skip_whitespace(s, &c); + + *x = stbi__pnm_getinteger(s, &c); // read width + stbi__pnm_skip_whitespace(s, &c); + + *y = stbi__pnm_getinteger(s, &c); // read height + stbi__pnm_skip_whitespace(s, &c); + + maxv = stbi__pnm_getinteger(s, &c); // read max value + + if (maxv > 255) + return stbi__err("max value > 255", "PPM image not 8-bit"); + else + return 1; +} +#endif + +static int stbi__info_main(stbi__context *s, int *x, int *y, int *comp) +{ + #ifndef STBI_NO_JPEG + if (stbi__jpeg_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_PNG + if (stbi__png_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_GIF + if (stbi__gif_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_BMP + if (stbi__bmp_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_PSD + if (stbi__psd_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_PIC + if (stbi__pic_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_PNM + if (stbi__pnm_info(s, x, y, comp)) return 1; + #endif + + #ifndef STBI_NO_HDR + if (stbi__hdr_info(s, x, y, comp)) return 1; + #endif + + // test tga last because it's a crappy test! + #ifndef STBI_NO_TGA + if (stbi__tga_info(s, x, y, comp)) + return 1; + #endif + return stbi__err("unknown image type", "Image not of any known type, or corrupt"); +} + +#ifndef STBI_NO_STDIO +STBIDEF int stbi_info(char const *filename, int *x, int *y, int *comp) +{ + FILE *f = stbi__fopen(filename, "rb"); + int result; + if (!f) return stbi__err("can't fopen", "Unable to open file"); + result = stbi_info_from_file(f, x, y, comp); + fclose(f); + return result; +} + +STBIDEF int stbi_info_from_file(FILE *f, int *x, int *y, int *comp) +{ + int r; + stbi__context s; + long pos = ftell(f); + stbi__start_file(&s, f); + r = stbi__info_main(&s,x,y,comp); + fseek(f,pos,SEEK_SET); + return r; +} +#endif // !STBI_NO_STDIO + +STBIDEF int stbi_info_from_memory(stbi_uc const *buffer, int len, int *x, int *y, int *comp) +{ + stbi__context s; + stbi__start_mem(&s,buffer,len); + return stbi__info_main(&s,x,y,comp); +} + +STBIDEF int stbi_info_from_callbacks(stbi_io_callbacks const *c, void *user, int *x, int *y, int *comp) +{ + stbi__context s; + stbi__start_callbacks(&s, (stbi_io_callbacks *) c, user); + return stbi__info_main(&s,x,y,comp); +} + +#endif // STB_IMAGE_IMPLEMENTATION + +/* + revision history: + 2.13 (2016-11-29) add 16-bit API, only supported for PNG right now + 2.12 (2016-04-02) fix typo in 2.11 PSD fix that caused crashes + 2.11 (2016-04-02) allocate large structures on the stack + remove white matting for transparent PSD + fix reported channel count for PNG & BMP + re-enable SSE2 in non-gcc 64-bit + support RGB-formatted JPEG + read 16-bit PNGs (only as 8-bit) + 2.10 (2016-01-22) avoid warning introduced in 2.09 by STBI_REALLOC_SIZED + 2.09 (2016-01-16) allow comments in PNM files + 16-bit-per-pixel TGA (not bit-per-component) + info() for TGA could break due to .hdr handling + info() for BMP to shares code instead of sloppy parse + can use STBI_REALLOC_SIZED if allocator doesn't support realloc + code cleanup + 2.08 (2015-09-13) fix to 2.07 cleanup, reading RGB PSD as RGBA + 2.07 (2015-09-13) fix compiler warnings + partial animated GIF support + limited 16-bpc PSD support + #ifdef unused functions + bug with < 92 byte PIC,PNM,HDR,TGA + 2.06 (2015-04-19) fix bug where PSD returns wrong '*comp' value + 2.05 (2015-04-19) fix bug in progressive JPEG handling, fix warning + 2.04 (2015-04-15) try to re-enable SIMD on MinGW 64-bit + 2.03 (2015-04-12) extra corruption checking (mmozeiko) + stbi_set_flip_vertically_on_load (nguillemot) + fix NEON support; fix mingw support + 2.02 (2015-01-19) fix incorrect assert, fix warning + 2.01 (2015-01-17) fix various warnings; suppress SIMD on gcc 32-bit without -msse2 + 2.00b (2014-12-25) fix STBI_MALLOC in progressive JPEG + 2.00 (2014-12-25) optimize JPG, including x86 SSE2 & NEON SIMD (ryg) + progressive JPEG (stb) + PGM/PPM support (Ken Miller) + STBI_MALLOC,STBI_REALLOC,STBI_FREE + GIF bugfix -- seemingly never worked + STBI_NO_*, STBI_ONLY_* + 1.48 (2014-12-14) fix incorrectly-named assert() + 1.47 (2014-12-14) 1/2/4-bit PNG support, both direct and paletted (Omar Cornut & stb) + optimize PNG (ryg) + fix bug in interlaced PNG with user-specified channel count (stb) + 1.46 (2014-08-26) + fix broken tRNS chunk (colorkey-style transparency) in non-paletted PNG + 1.45 (2014-08-16) + fix MSVC-ARM internal compiler error by wrapping malloc + 1.44 (2014-08-07) + various warning fixes from Ronny Chevalier + 1.43 (2014-07-15) + fix MSVC-only compiler problem in code changed in 1.42 + 1.42 (2014-07-09) + don't define _CRT_SECURE_NO_WARNINGS (affects user code) + fixes to stbi__cleanup_jpeg path + added STBI_ASSERT to avoid requiring assert.h + 1.41 (2014-06-25) + fix search&replace from 1.36 that messed up comments/error messages + 1.40 (2014-06-22) + fix gcc struct-initialization warning + 1.39 (2014-06-15) + fix to TGA optimization when req_comp != number of components in TGA; + fix to GIF loading because BMP wasn't rewinding (whoops, no GIFs in my test suite) + add support for BMP version 5 (more ignored fields) + 1.38 (2014-06-06) + suppress MSVC warnings on integer casts truncating values + fix accidental rename of 'skip' field of I/O + 1.37 (2014-06-04) + remove duplicate typedef + 1.36 (2014-06-03) + convert to header file single-file library + if de-iphone isn't set, load iphone images color-swapped instead of returning NULL + 1.35 (2014-05-27) + various warnings + fix broken STBI_SIMD path + fix bug where stbi_load_from_file no longer left file pointer in correct place + fix broken non-easy path for 32-bit BMP (possibly never used) + TGA optimization by Arseny Kapoulkine + 1.34 (unknown) + use STBI_NOTUSED in stbi__resample_row_generic(), fix one more leak in tga failure case + 1.33 (2011-07-14) + make stbi_is_hdr work in STBI_NO_HDR (as specified), minor compiler-friendly improvements + 1.32 (2011-07-13) + support for "info" function for all supported filetypes (SpartanJ) + 1.31 (2011-06-20) + a few more leak fixes, bug in PNG handling (SpartanJ) + 1.30 (2011-06-11) + added ability to load files via callbacks to accomidate custom input streams (Ben Wenger) + removed deprecated format-specific test/load functions + removed support for installable file formats (stbi_loader) -- would have been broken for IO callbacks anyway + error cases in bmp and tga give messages and don't leak (Raymond Barbiero, grisha) + fix inefficiency in decoding 32-bit BMP (David Woo) + 1.29 (2010-08-16) + various warning fixes from Aurelien Pocheville + 1.28 (2010-08-01) + fix bug in GIF palette transparency (SpartanJ) + 1.27 (2010-08-01) + cast-to-stbi_uc to fix warnings + 1.26 (2010-07-24) + fix bug in file buffering for PNG reported by SpartanJ + 1.25 (2010-07-17) + refix trans_data warning (Won Chun) + 1.24 (2010-07-12) + perf improvements reading from files on platforms with lock-heavy fgetc() + minor perf improvements for jpeg + deprecated type-specific functions so we'll get feedback if they're needed + attempt to fix trans_data warning (Won Chun) + 1.23 fixed bug in iPhone support + 1.22 (2010-07-10) + removed image *writing* support + stbi_info support from Jetro Lauha + GIF support from Jean-Marc Lienher + iPhone PNG-extensions from James Brown + warning-fixes from Nicolas Schulz and Janez Zemva (i.stbi__err. Janez (U+017D)emva) + 1.21 fix use of 'stbi_uc' in header (reported by jon blow) + 1.20 added support for Softimage PIC, by Tom Seddon + 1.19 bug in interlaced PNG corruption check (found by ryg) + 1.18 (2008-08-02) + fix a threading bug (local mutable static) + 1.17 support interlaced PNG + 1.16 major bugfix - stbi__convert_format converted one too many pixels + 1.15 initialize some fields for thread safety + 1.14 fix threadsafe conversion bug + header-file-only version (#define STBI_HEADER_FILE_ONLY before including) + 1.13 threadsafe + 1.12 const qualifiers in the API + 1.11 Support installable IDCT, colorspace conversion routines + 1.10 Fixes for 64-bit (don't use "unsigned long") + optimized upsampling by Fabian "ryg" Giesen + 1.09 Fix format-conversion for PSD code (bad global variables!) + 1.08 Thatcher Ulrich's PSD code integrated by Nicolas Schulz + 1.07 attempt to fix C++ warning/errors again + 1.06 attempt to fix C++ warning/errors again + 1.05 fix TGA loading to return correct *comp and use good luminance calc + 1.04 default float alpha is 1, not 255; use 'void *' for stbi_image_free + 1.03 bugfixes to STBI_NO_STDIO, STBI_NO_HDR + 1.02 support for (subset of) HDR files, float interface for preferred access to them + 1.01 fix bug: possible bug in handling right-side up bmps... not sure + fix bug: the stbi__bmp_load() and stbi__tga_load() functions didn't work at all + 1.00 interface to zlib that skips zlib header + 0.99 correct handling of alpha in palette + 0.98 TGA loader by lonesock; dynamically add loaders (untested) + 0.97 jpeg errors on too large a file; also catch another malloc failure + 0.96 fix detection of invalid v value - particleman@mollyrocket forum + 0.95 during header scan, seek to markers in case of padding + 0.94 STBI_NO_STDIO to disable stdio usage; rename all #defines the same + 0.93 handle jpegtran output; verbose errors + 0.92 read 4,8,16,24,32-bit BMP files of several formats + 0.91 output 24-bit Windows 3.0 BMP files + 0.90 fix a few more warnings; bump version number to approach 1.0 + 0.61 bugfixes due to Marc LeBlanc, Christopher Lloyd + 0.60 fix compiling as c++ + 0.59 fix warnings: merge Dave Moore's -Wall fixes + 0.58 fix bug: zlib uncompressed mode len/nlen was wrong endian + 0.57 fix bug: jpg last huffman symbol before marker was >9 bits but less than 16 available + 0.56 fix bug: zlib uncompressed mode len vs. nlen + 0.55 fix bug: restart_interval not initialized to 0 + 0.54 allow NULL for 'int *comp' + 0.53 fix bug in png 3->4; speedup png decoding + 0.52 png handles req_comp=3,4 directly; minor cleanup; jpeg comments + 0.51 obey req_comp requests, 1-component jpegs return as 1-component, + on 'test' only check type, not whether we support this variant + 0.50 (2006-11-19) + first released version +*/ + + +/* +------------------------------------------------------------------------------ +This software is available under 2 licenses -- choose whichever you prefer. +------------------------------------------------------------------------------ +ALTERNATIVE A - MIT License +Copyright (c) 2017 Sean Barrett +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies +of the Software, and to permit persons to whom the Software is furnished to do +so, subject to the following conditions: +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +------------------------------------------------------------------------------ +ALTERNATIVE B - Public Domain (www.unlicense.org) +This is free and unencumbered software released into the public domain. +Anyone is free to copy, modify, publish, use, compile, sell, or distribute this +software, either in source code form or as a compiled binary, for any purpose, +commercial or non-commercial, and by any means. +In jurisdictions that recognize copyright laws, the author or authors of this +software dedicate any and all copyright interest in the software to the public +domain. We make this dedication for the benefit of the public at large and to +the detriment of our heirs and successors. We intend this dedication to be an +overt act of relinquishment in perpetuity of all present and future rights to +this software under copyright law. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +------------------------------------------------------------------------------ +*/ diff --git a/third_party/tiny_jpeg.h b/third_party/tiny_jpeg.h new file mode 100644 index 0000000..e8f9a92 --- /dev/null +++ b/third_party/tiny_jpeg.h @@ -0,0 +1,1279 @@ +/** + * tiny_jpeg.h + * + * Tiny JPEG Encoder + * - Sergio Gonzalez + * + * This is a readable and simple single-header JPEG encoder. + * + * Features + * - Implements Baseline DCT JPEG compression. + * - No dynamic allocations. + * + * This library is coded in the spirit of the stb libraries and mostly follows + * the stb guidelines. + * + * It is written in C99. And depends on the C standard library. + * Works with C++11 + * + * + * ==== Thanks ==== + * + * AssociationSirius (Bug reports) + * Bernard van Gastel (Thread-safe defaults, BSD compilation) + * + * + * ==== License ==== + * + * This software is in the public domain. Where that dedication is not + * recognized, you are granted a perpetual, irrevocable license to copy and + * modify this file as you see fit. + * + */ + +// ============================================================ +// Usage +// ============================================================ +// Include "tiny_jpeg.h" to and use the public interface defined below. +// +// You *must* do: +// +// #define TJE_IMPLEMENTATION +// #include "tiny_jpeg.h" +// +// in exactly one of your C files to actually compile the implementation. + + +// Here is an example program that loads a bmp with stb_image and writes it +// with Tiny JPEG + +/* + +#define STB_IMAGE_IMPLEMENTATION +#include "stb_image.h" + + +#define TJE_IMPLEMENTATION +#include "tiny_jpeg.h" + + +int main() +{ + int width, height, num_components; + unsigned char* data = stbi_load("in.bmp", &width, &height, &num_components, 0); + if ( !data ) { + puts("Could not find file"); + return EXIT_FAILURE; + } + + if ( !tje_encode_to_file("out.jpg", width, height, num_components, data) ) { + fprintf(stderr, "Could not write JPEG\n"); + return EXIT_FAILURE; + } + + return EXIT_SUCCESS; +} + +*/ + + + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if defined(__GNUC__) || defined(__clang__) +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wmissing-field-initializers" // We use {0}, which will zero-out the struct. +#pragma GCC diagnostic ignored "-Wmissing-braces" +#pragma GCC diagnostic ignored "-Wpadded" +#endif + +// ============================================================ +// Public interface: +// ============================================================ + +#ifndef TJE_HEADER_GUARD +#define TJE_HEADER_GUARD + +// - tje_encode_to_file - +// +// Usage: +// Takes bitmap data and writes a JPEG-encoded image to disk. +// +// PARAMETERS +// dest_path: filename to which we will write. e.g. "out.jpg" +// width, height: image size in pixels +// num_components: 3 is RGB. 4 is RGBA. Those are the only supported values +// src_data: pointer to the pixel data. +// +// RETURN: +// 0 on error. 1 on success. + +int tje_encode_to_file(const char* dest_path, + const int width, + const int height, + const int num_components, + const unsigned char* src_data); + +// - tje_encode_to_file_at_quality - +// +// Usage: +// Takes bitmap data and writes a JPEG-encoded image to disk. +// +// PARAMETERS +// dest_path: filename to which we will write. e.g. "out.jpg" +// quality: 3: Highest. Compression varies wildly (between 1/3 and 1/20). +// 2: Very good quality. About 1/2 the size of 3. +// 1: Noticeable. About 1/6 the size of 3, or 1/3 the size of 2. +// width, height: image size in pixels +// num_components: 3 is RGB. 4 is RGBA. Those are the only supported values +// src_data: pointer to the pixel data. +// +// RETURN: +// 0 on error. 1 on success. + +int tje_encode_to_file_at_quality(const char* dest_path, + const int quality, + const int width, + const int height, + const int num_components, + const unsigned char* src_data); + +// - tje_encode_with_func - +// +// Usage +// Same as tje_encode_to_file_at_quality, but it takes a callback that knows +// how to handle (or ignore) `context`. The callback receives an array `data` +// of `size` bytes, which can be written directly to a file. There is no need +// to free the data. + +typedef void tje_write_func(void* context, void* data, int size); + +int tje_encode_with_func(tje_write_func* func, + void* context, + const int quality, + const int width, + const int height, + const int num_components, + const unsigned char* src_data); + +#endif // TJE_HEADER_GUARD + + + +// Implementation: In exactly one of the source files of your application, +// define TJE_IMPLEMENTATION and include tiny_jpeg.h + +// ============================================================ +// Internal +// ============================================================ +#ifdef TJE_IMPLEMENTATION + + +#define tjei_min(a, b) ((a) < b) ? (a) : (b); +#define tjei_max(a, b) ((a) < b) ? (b) : (a); + + +#if defined(_MSC_VER) +#define TJEI_FORCE_INLINE __forceinline +// #define TJEI_FORCE_INLINE __declspec(noinline) // For profiling +#else +#define TJEI_FORCE_INLINE static // TODO: equivalent for gcc & clang +#endif + +// Only use zero for debugging and/or inspection. +#define TJE_USE_FAST_DCT 1 + +// C std lib +#include +#include +#include // floorf, ceilf +#include // FILE, puts +#include // memcpy + + +#define TJEI_BUFFER_SIZE 1024 + +#ifdef _WIN32 + +#include +#ifndef snprintf +#define snprintf sprintf_s +#endif +// Not quite the same but it works for us. If I am not mistaken, it differs +// only in the return value. + +#endif + +#ifndef NDEBUG + +#ifdef _WIN32 +#define tje_log(msg) OutputDebugStringA(msg) +#elif defined(__linux__) || defined(__APPLE__) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) +#define tje_log(msg) puts(msg) +#else +#warning "need a tje_log definition for your platform for debugging purposes (not needed if compiling with NDEBUG)" +#endif + +#else // NDEBUG +#define tje_log(msg) +#endif // NDEBUG + + +typedef struct +{ + void* context; + tje_write_func* func; +} TJEWriteContext; + +typedef struct +{ + // Huffman data. + uint8_t ehuffsize[4][257]; + uint16_t ehuffcode[4][256]; + uint8_t const * ht_bits[4]; + uint8_t const * ht_vals[4]; + + // Cuantization tables. + uint8_t qt_luma[64]; + uint8_t qt_chroma[64]; + + // fwrite by default. User-defined when using tje_encode_with_func. + TJEWriteContext write_context; + + // Buffered output. Big performance win when using the usual stdlib implementations. + size_t output_buffer_count; + uint8_t output_buffer[TJEI_BUFFER_SIZE]; +} TJEState; + +// ============================================================ +// Table definitions. +// +// The spec defines tjei_default reasonably good quantization matrices and huffman +// specification tables. +// +// +// Instead of hard-coding the final huffman table, we only hard-code the table +// spec suggested by the specification, and then derive the full table from +// there. This is only for didactic purposes but it might be useful if there +// ever is the case that we need to swap huffman tables from various sources. +// ============================================================ + + +// K.1 - suggested luminance QT +static const uint8_t tjei_default_qt_luma_from_spec[] = +{ + 16,11,10,16, 24, 40, 51, 61, + 12,12,14,19, 26, 58, 60, 55, + 14,13,16,24, 40, 57, 69, 56, + 14,17,22,29, 51, 87, 80, 62, + 18,22,37,56, 68,109,103, 77, + 24,35,55,64, 81,104,113, 92, + 49,64,78,87,103,121,120,101, + 72,92,95,98,112,100,103, 99, +}; + +// Unused +#if 0 +static const uint8_t tjei_default_qt_chroma_from_spec[] = +{ + // K.1 - suggested chrominance QT + 17,18,24,47,99,99,99,99, + 18,21,26,66,99,99,99,99, + 24,26,56,99,99,99,99,99, + 47,66,99,99,99,99,99,99, + 99,99,99,99,99,99,99,99, + 99,99,99,99,99,99,99,99, + 99,99,99,99,99,99,99,99, + 99,99,99,99,99,99,99,99, +}; +#endif + +static const uint8_t tjei_default_qt_chroma_from_paper[] = +{ + // Example QT from JPEG paper + 16, 12, 14, 14, 18, 24, 49, 72, + 11, 10, 16, 24, 40, 51, 61, 12, + 13, 17, 22, 35, 64, 92, 14, 16, + 22, 37, 55, 78, 95, 19, 24, 29, + 56, 64, 87, 98, 26, 40, 51, 68, + 81, 103, 112, 58, 57, 87, 109, 104, + 121,100, 60, 69, 80, 103, 113, 120, + 103, 55, 56, 62, 77, 92, 101, 99, +}; + +// == Procedure to 'deflate' the huffman tree: JPEG spec, C.2 + +// Number of 16 bit values for every code length. (K.3.3.1) +static const uint8_t tjei_default_ht_luma_dc_len[16] = +{ + 0,1,5,1,1,1,1,1,1,0,0,0,0,0,0,0 +}; +// values +static const uint8_t tjei_default_ht_luma_dc[12] = +{ + 0,1,2,3,4,5,6,7,8,9,10,11 +}; + +// Number of 16 bit values for every code length. (K.3.3.1) +static const uint8_t tjei_default_ht_chroma_dc_len[16] = +{ + 0,3,1,1,1,1,1,1,1,1,1,0,0,0,0,0 +}; +// values +static const uint8_t tjei_default_ht_chroma_dc[12] = +{ + 0,1,2,3,4,5,6,7,8,9,10,11 +}; + +// Same as above, but AC coefficients. +static const uint8_t tjei_default_ht_luma_ac_len[16] = +{ + 0,2,1,3,3,2,4,3,5,5,4,4,0,0,1,0x7d +}; +static const uint8_t tjei_default_ht_luma_ac[] = +{ + 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2A, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4A, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, + 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, 0xE1, 0xE2, + 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +static const uint8_t tjei_default_ht_chroma_ac_len[16] = +{ + 0,2,1,2,4,4,3,4,7,5,4,4,0,1,2,0x77 +}; +static const uint8_t tjei_default_ht_chroma_ac[] = +{ + 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, + 0x15, 0x62, 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, + 0x27, 0x28, 0x29, 0x2A, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, + 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, 0xBA, 0xC2, 0xC3, + 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, + 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + + +// ============================================================ +// Code +// ============================================================ + +// Zig-zag order: +static const uint8_t tjei_zig_zag[64] = +{ + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63, +}; + +// Memory order as big endian. 0xhilo -> 0xlohi which looks as 0xhilo in memory. +static uint16_t tjei_be_word(const uint16_t le_word) +{ + uint16_t lo = (le_word & 0x00ff); + uint16_t hi = ((le_word & 0xff00) >> 8); + return (uint16_t)((lo << 8) | hi); +} + +// ============================================================ +// The following structs exist only for code clarity, debugability, and +// readability. They are used when writing to disk, but it is useful to have +// 1-packed-structs to document how the format works, and to inspect memory +// while developing. +// ============================================================ + +static const uint8_t tjeik_jfif_id[] = "JFIF"; +static const uint8_t tjeik_com_str[] = "Created by Tiny JPEG Encoder"; + +// TODO: Get rid of packed structs! +#pragma pack(push) +#pragma pack(1) +typedef struct +{ + uint16_t SOI; + // JFIF header. + uint16_t APP0; + uint16_t jfif_len; + uint8_t jfif_id[5]; + uint16_t version; + uint8_t units; + uint16_t x_density; + uint16_t y_density; + uint8_t x_thumb; + uint8_t y_thumb; +} TJEJPEGHeader; + +typedef struct +{ + uint16_t com; + uint16_t com_len; + char com_str[sizeof(tjeik_com_str) - 1]; +} TJEJPEGComment; + +// Helper struct for TJEFrameHeader (below). +typedef struct +{ + uint8_t component_id; + uint8_t sampling_factors; // most significant 4 bits: horizontal. 4 LSB: vertical (A.1.1) + uint8_t qt; // Quantization table selector. +} TJEComponentSpec; + +typedef struct +{ + uint16_t SOF; + uint16_t len; // 8 + 3 * frame.num_components + uint8_t precision; // Sample precision (bits per sample). + uint16_t height; + uint16_t width; + uint8_t num_components; // For this implementation, will be equal to 3. + TJEComponentSpec component_spec[3]; +} TJEFrameHeader; + +typedef struct +{ + uint8_t component_id; // Just as with TJEComponentSpec + uint8_t dc_ac; // (dc|ac) +} TJEFrameComponentSpec; + +typedef struct +{ + uint16_t SOS; + uint16_t len; + uint8_t num_components; // 3. + TJEFrameComponentSpec component_spec[3]; + uint8_t first; // 0 + uint8_t last; // 63 + uint8_t ah_al; // o +} TJEScanHeader; +#pragma pack(pop) + + +static void tjei_write(TJEState* state, const void* data, size_t num_bytes, size_t num_elements) +{ + size_t to_write = num_bytes * num_elements; + + // Cap to the buffer available size and copy memory. + size_t capped_count = tjei_min(to_write, TJEI_BUFFER_SIZE - 1 - state->output_buffer_count); + + memcpy(state->output_buffer + state->output_buffer_count, data, capped_count); + state->output_buffer_count += capped_count; + + assert (state->output_buffer_count <= TJEI_BUFFER_SIZE - 1); + + // Flush the buffer. + if ( state->output_buffer_count == TJEI_BUFFER_SIZE - 1 ) { + state->write_context.func(state->write_context.context, state->output_buffer, (int)state->output_buffer_count); + state->output_buffer_count = 0; + } + + // Recursively calling ourselves with the rest of the buffer. + if (capped_count < to_write) { + tjei_write(state, (uint8_t*)data+capped_count, to_write - capped_count, 1); + } +} + +static void tjei_write_DQT(TJEState* state, const uint8_t* matrix, uint8_t id) +{ + uint16_t DQT = tjei_be_word(0xffdb); + tjei_write(state, &DQT, sizeof(uint16_t), 1); + uint16_t len = tjei_be_word(0x0043); // 2(len) + 1(id) + 64(matrix) = 67 = 0x43 + tjei_write(state, &len, sizeof(uint16_t), 1); + assert(id < 4); + uint8_t precision_and_id = id; // 0x0000 8 bits | 0x00id + tjei_write(state, &precision_and_id, sizeof(uint8_t), 1); + // Write matrix + tjei_write(state, matrix, 64*sizeof(uint8_t), 1); +} + +typedef enum +{ + TJEI_DC = 0, + TJEI_AC = 1 +} TJEHuffmanTableClass; + +static void tjei_write_DHT(TJEState* state, + uint8_t const * matrix_len, + uint8_t const * matrix_val, + TJEHuffmanTableClass ht_class, + uint8_t id) +{ + int num_values = 0; + for ( int i = 0; i < 16; ++i ) { + num_values += matrix_len[i]; + } + assert(num_values <= 0xffff); + + uint16_t DHT = tjei_be_word(0xffc4); + // 2(len) + 1(Tc|th) + 16 (num lengths) + ?? (num values) + uint16_t len = tjei_be_word(2 + 1 + 16 + (uint16_t)num_values); + assert(id < 4); + uint8_t tc_th = (uint8_t)((((uint8_t)ht_class) << 4) | id); + + tjei_write(state, &DHT, sizeof(uint16_t), 1); + tjei_write(state, &len, sizeof(uint16_t), 1); + tjei_write(state, &tc_th, sizeof(uint8_t), 1); + tjei_write(state, matrix_len, sizeof(uint8_t), 16); + tjei_write(state, matrix_val, sizeof(uint8_t), (size_t)num_values); +} +// ============================================================ +// Huffman deflation code. +// ============================================================ + +// Returns all code sizes from the BITS specification (JPEG C.3) +static uint8_t* tjei_huff_get_code_lengths(uint8_t huffsize[/*256*/], uint8_t const * bits) +{ + int k = 0; + for ( int i = 0; i < 16; ++i ) { + for ( int j = 0; j < bits[i]; ++j ) { + huffsize[k++] = (uint8_t)(i + 1); + } + huffsize[k] = 0; + } + return huffsize; +} + +// Fills out the prefixes for each code. +static uint16_t* tjei_huff_get_codes(uint16_t codes[], uint8_t* huffsize, int64_t count) +{ + uint16_t code = 0; + int k = 0; + uint8_t sz = huffsize[0]; + for(;;) { + do { + assert(k < count); + codes[k++] = code++; + } while (huffsize[k] == sz); + if (huffsize[k] == 0) { + return codes; + } + do { + code = (uint16_t)(code << 1); + ++sz; + } while( huffsize[k] != sz ); + } +} + +static void tjei_huff_get_extended(uint8_t* out_ehuffsize, + uint16_t* out_ehuffcode, + uint8_t const * huffval, + uint8_t* huffsize, + uint16_t* huffcode, int64_t count) +{ + int k = 0; + do { + uint8_t val = huffval[k]; + out_ehuffcode[val] = huffcode[k]; + out_ehuffsize[val] = huffsize[k]; + k++; + } while ( k < count ); +} +// ============================================================ + +// Returns: +// out[1] : number of bits +// out[0] : bits +TJEI_FORCE_INLINE void tjei_calculate_variable_length_int(int value, uint16_t out[2]) +{ + int abs_val = value; + if ( value < 0 ) { + abs_val = -abs_val; + --value; + } + out[1] = 1; + while( abs_val >>= 1 ) { + ++out[1]; + } + out[0] = (uint16_t)(value & ((1 << out[1]) - 1)); +} + +// Write bits to file. +TJEI_FORCE_INLINE void tjei_write_bits(TJEState* state, + uint32_t* bitbuffer, uint32_t* location, + uint16_t num_bits, uint16_t bits) +{ + // v-- location + // [ ] <-- bit buffer + // 32 0 + // + // This call pushes to the bitbuffer and saves the location. Data is pushed + // from most significant to less significant. + // When we can write a full byte, we write a byte and shift. + + // Push the stack. + uint32_t nloc = *location + num_bits; + *bitbuffer |= (uint32_t)(bits << (32 - nloc)); + *location = nloc; + while ( *location >= 8 ) { + // Grab the most significant byte. + uint8_t c = (uint8_t)((*bitbuffer) >> 24); + // Write it to file. + tjei_write(state, &c, 1, 1); + if ( c == 0xff ) { + // Special case: tell JPEG this is not a marker. + char z = 0; + tjei_write(state, &z, 1, 1); + } + // Pop the stack. + *bitbuffer <<= 8; + *location -= 8; + } +} + +// DCT implementation by Thomas G. Lane. +// Obtained through NVIDIA +// http://developer.download.nvidia.com/SDK/9.5/Samples/vidimaging_samples.html#gpgpu_dct +// +// QUOTE: +// This implementation is based on Arai, Agui, and Nakajima's algorithm for +// scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in +// Japanese, but the algorithm is described in the Pennebaker & Mitchell +// JPEG textbook (see REFERENCES section in file README). The following code +// is based directly on figure 4-8 in P&M. +// +static void tjei_fdct (float * data) +{ + float tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + float tmp10, tmp11, tmp12, tmp13; + float z1, z2, z3, z4, z5, z11, z13; + float *dataptr; + int ctr; + + /* Pass 1: process rows. */ + + dataptr = data; + for ( ctr = 7; ctr >= 0; ctr-- ) { + tmp0 = dataptr[0] + dataptr[7]; + tmp7 = dataptr[0] - dataptr[7]; + tmp1 = dataptr[1] + dataptr[6]; + tmp6 = dataptr[1] - dataptr[6]; + tmp2 = dataptr[2] + dataptr[5]; + tmp5 = dataptr[2] - dataptr[5]; + tmp3 = dataptr[3] + dataptr[4]; + tmp4 = dataptr[3] - dataptr[4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[0] = tmp10 + tmp11; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((float) 0.707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((float) 0.382683433); /* c6 */ + z2 = ((float) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((float) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((float) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += 8; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for ( ctr = 8-1; ctr >= 0; ctr-- ) { + tmp0 = dataptr[8*0] + dataptr[8*7]; + tmp7 = dataptr[8*0] - dataptr[8*7]; + tmp1 = dataptr[8*1] + dataptr[8*6]; + tmp6 = dataptr[8*1] - dataptr[8*6]; + tmp2 = dataptr[8*2] + dataptr[8*5]; + tmp5 = dataptr[8*2] - dataptr[8*5]; + tmp3 = dataptr[8*3] + dataptr[8*4]; + tmp4 = dataptr[8*3] - dataptr[8*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[8*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[8*4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((float) 0.707106781); /* c4 */ + dataptr[8*2] = tmp13 + z1; /* phase 5 */ + dataptr[8*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((float) 0.382683433); /* c6 */ + z2 = ((float) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((float) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((float) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[8*5] = z13 + z2; /* phase 6 */ + dataptr[8*3] = z13 - z2; + dataptr[8*1] = z11 + z4; + dataptr[8*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} +#if !TJE_USE_FAST_DCT +static float slow_fdct(int u, int v, float* data) +{ +#define kPI 3.14159265f + float res = 0.0f; + float cu = (u == 0) ? 0.70710678118654f : 1; + float cv = (v == 0) ? 0.70710678118654f : 1; + for ( int y = 0; y < 8; ++y ) { + for ( int x = 0; x < 8; ++x ) { + res += (data[y * 8 + x]) * + cosf(((2.0f * x + 1.0f) * u * kPI) / 16.0f) * + cosf(((2.0f * y + 1.0f) * v * kPI) / 16.0f); + } + } + res *= 0.25f * cu * cv; + return res; +#undef kPI +} +#endif + +#define ABS(x) ((x) < 0 ? -(x) : (x)) + +static void tjei_encode_and_write_MCU(TJEState* state, + float* mcu, +#if TJE_USE_FAST_DCT + float* qt, // Pre-processed quantization matrix. +#else + uint8_t* qt, +#endif + uint8_t* huff_dc_len, uint16_t* huff_dc_code, // Huffman tables + uint8_t* huff_ac_len, uint16_t* huff_ac_code, + int* pred, // Previous DC coefficient + uint32_t* bitbuffer, // Bitstack. + uint32_t* location) +{ + int du[64]; // Data unit in zig-zag order + + float dct_mcu[64]; + memcpy(dct_mcu, mcu, 64 * sizeof(float)); + +#if TJE_USE_FAST_DCT + tjei_fdct(dct_mcu); + for ( int i = 0; i < 64; ++i ) { + float fval = dct_mcu[i]; + fval *= qt[i]; +#if 0 + fval = (fval > 0) ? floorf(fval + 0.5f) : ceilf(fval - 0.5f); +#else + fval = floorf(fval + 1024 + 0.5f); + fval -= 1024; +#endif + int val = (int)fval; + du[tjei_zig_zag[i]] = val; + } +#else + for ( int v = 0; v < 8; ++v ) { + for ( int u = 0; u < 8; ++u ) { + dct_mcu[v * 8 + u] = slow_fdct(u, v, mcu); + } + } + for ( int i = 0; i < 64; ++i ) { + float fval = dct_mcu[i] / (qt[i]); + int val = (int)((fval > 0) ? floorf(fval + 0.5f) : ceilf(fval - 0.5f)); + du[tjei_zig_zag[i]] = val; + } +#endif + + uint16_t vli[2]; + + // Encode DC coefficient. + int diff = du[0] - *pred; + *pred = du[0]; + if ( diff != 0 ) { + tjei_calculate_variable_length_int(diff, vli); + // Write number of bits with Huffman coding + tjei_write_bits(state, bitbuffer, location, huff_dc_len[vli[1]], huff_dc_code[vli[1]]); + // Write the bits. + tjei_write_bits(state, bitbuffer, location, vli[1], vli[0]); + } else { + tjei_write_bits(state, bitbuffer, location, huff_dc_len[0], huff_dc_code[0]); + } + + // ==== Encode AC coefficients ==== + + int last_non_zero_i = 0; + // Find the last non-zero element. + for ( int i = 63; i > 0; --i ) { + if (du[i] != 0) { + last_non_zero_i = i; + break; + } + } + + for ( int i = 1; i <= last_non_zero_i; ++i ) { + // If zero, increase count. If >=15, encode (FF,00) + int zero_count = 0; + while ( du[i] == 0 ) { + ++zero_count; + ++i; + if (zero_count == 16) { + // encode (ff,00) == 0xf0 + tjei_write_bits(state, bitbuffer, location, huff_ac_len[0xf0], huff_ac_code[0xf0]); + zero_count = 0; + } + } + tjei_calculate_variable_length_int(du[i], vli); + + assert(zero_count < 0x10); + assert(vli[1] <= 10); + + uint16_t sym1 = (uint16_t)((uint16_t)zero_count << 4) | vli[1]; + + assert(huff_ac_len[sym1] != 0); + + // Write symbol 1 --- (RUNLENGTH, SIZE) + tjei_write_bits(state, bitbuffer, location, huff_ac_len[sym1], huff_ac_code[sym1]); + // Write symbol 2 --- (AMPLITUDE) + tjei_write_bits(state, bitbuffer, location, vli[1], vli[0]); + } + + if (last_non_zero_i != 63) { + // write EOB HUFF(00,00) + tjei_write_bits(state, bitbuffer, location, huff_ac_len[0], huff_ac_code[0]); + } + return; +} + +enum { + TJEI_LUMA_DC, + TJEI_LUMA_AC, + TJEI_CHROMA_DC, + TJEI_CHROMA_AC, +}; + +#if TJE_USE_FAST_DCT +struct TJEProcessedQT +{ + float chroma[64]; + float luma[64]; +}; +#endif + +// Set up huffman tables in state. +static void tjei_huff_expand(TJEState* state) +{ + assert(state); + + state->ht_bits[TJEI_LUMA_DC] = tjei_default_ht_luma_dc_len; + state->ht_bits[TJEI_LUMA_AC] = tjei_default_ht_luma_ac_len; + state->ht_bits[TJEI_CHROMA_DC] = tjei_default_ht_chroma_dc_len; + state->ht_bits[TJEI_CHROMA_AC] = tjei_default_ht_chroma_ac_len; + + state->ht_vals[TJEI_LUMA_DC] = tjei_default_ht_luma_dc; + state->ht_vals[TJEI_LUMA_AC] = tjei_default_ht_luma_ac; + state->ht_vals[TJEI_CHROMA_DC] = tjei_default_ht_chroma_dc; + state->ht_vals[TJEI_CHROMA_AC] = tjei_default_ht_chroma_ac; + + // How many codes in total for each of LUMA_(DC|AC) and CHROMA_(DC|AC) + int32_t spec_tables_len[4] = { 0 }; + + for ( int i = 0; i < 4; ++i ) { + for ( int k = 0; k < 16; ++k ) { + spec_tables_len[i] += state->ht_bits[i][k]; + } + } + + // Fill out the extended tables.. + uint8_t huffsize[4][257]; + uint16_t huffcode[4][256]; + for ( int i = 0; i < 4; ++i ) { + assert (256 >= spec_tables_len[i]); + tjei_huff_get_code_lengths(huffsize[i], state->ht_bits[i]); + tjei_huff_get_codes(huffcode[i], huffsize[i], spec_tables_len[i]); + } + for ( int i = 0; i < 4; ++i ) { + int64_t count = spec_tables_len[i]; + tjei_huff_get_extended(state->ehuffsize[i], + state->ehuffcode[i], + state->ht_vals[i], + &huffsize[i][0], + &huffcode[i][0], count); + } +} + +static int tjei_encode_main(TJEState* state, + const unsigned char* src_data, + const int width, + const int height, + const int src_num_components) +{ + if (src_num_components != 3 && src_num_components != 4) { + return 0; + } + + if (width > 0xffff || height > 0xffff) { + return 0; + } + +#if TJE_USE_FAST_DCT + struct TJEProcessedQT pqt; + // Again, taken from classic japanese implementation. + // + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + static const float aan_scales[] = { + 1.0f, 1.387039845f, 1.306562965f, 1.175875602f, + 1.0f, 0.785694958f, 0.541196100f, 0.275899379f + }; + + // build (de)quantization tables + for(int y=0; y<8; y++) { + for(int x=0; x<8; x++) { + int i = y*8 + x; + pqt.luma[y*8+x] = 1.0f / (8 * aan_scales[x] * aan_scales[y] * state->qt_luma[tjei_zig_zag[i]]); + pqt.chroma[y*8+x] = 1.0f / (8 * aan_scales[x] * aan_scales[y] * state->qt_chroma[tjei_zig_zag[i]]); + } + } +#endif + + { // Write header + TJEJPEGHeader header; + // JFIF header. + header.SOI = tjei_be_word(0xffd8); // Sequential DCT + header.APP0 = tjei_be_word(0xffe0); + + uint16_t jfif_len = sizeof(TJEJPEGHeader) - 4 /*SOI & APP0 markers*/; + header.jfif_len = tjei_be_word(jfif_len); + memcpy(header.jfif_id, (void*)tjeik_jfif_id, 5); + header.version = tjei_be_word(0x0102); + header.units = 0x01; // Dots-per-inch + header.x_density = tjei_be_word(0x0060); // 96 DPI + header.y_density = tjei_be_word(0x0060); // 96 DPI + header.x_thumb = 0; + header.y_thumb = 0; + tjei_write(state, &header, sizeof(TJEJPEGHeader), 1); + } + { // Write comment + TJEJPEGComment com; + uint16_t com_len = 2 + sizeof(tjeik_com_str) - 1; + // Comment + com.com = tjei_be_word(0xfffe); + com.com_len = tjei_be_word(com_len); + memcpy(com.com_str, (void*)tjeik_com_str, sizeof(tjeik_com_str)-1); + tjei_write(state, &com, sizeof(TJEJPEGComment), 1); + } + + // Write quantization tables. + tjei_write_DQT(state, state->qt_luma, 0x00); + tjei_write_DQT(state, state->qt_chroma, 0x01); + + { // Write the frame marker. + TJEFrameHeader header; + header.SOF = tjei_be_word(0xffc0); + header.len = tjei_be_word(8 + 3 * 3); + header.precision = 8; + assert(width <= 0xffff); + assert(height <= 0xffff); + header.width = tjei_be_word((uint16_t)width); + header.height = tjei_be_word((uint16_t)height); + header.num_components = 3; + uint8_t tables[3] = { + 0, // Luma component gets luma table (see tjei_write_DQT call above.) + 1, // Chroma component gets chroma table + 1, // Chroma component gets chroma table + }; + for (int i = 0; i < 3; ++i) { + TJEComponentSpec spec; + spec.component_id = (uint8_t)(i + 1); // No particular reason. Just 1, 2, 3. + spec.sampling_factors = (uint8_t)0x11; + spec.qt = tables[i]; + + header.component_spec[i] = spec; + } + // Write to file. + tjei_write(state, &header, sizeof(TJEFrameHeader), 1); + } + + tjei_write_DHT(state, state->ht_bits[TJEI_LUMA_DC], state->ht_vals[TJEI_LUMA_DC], TJEI_DC, 0); + tjei_write_DHT(state, state->ht_bits[TJEI_LUMA_AC], state->ht_vals[TJEI_LUMA_AC], TJEI_AC, 0); + tjei_write_DHT(state, state->ht_bits[TJEI_CHROMA_DC], state->ht_vals[TJEI_CHROMA_DC], TJEI_DC, 1); + tjei_write_DHT(state, state->ht_bits[TJEI_CHROMA_AC], state->ht_vals[TJEI_CHROMA_AC], TJEI_AC, 1); + + // Write start of scan + { + TJEScanHeader header; + header.SOS = tjei_be_word(0xffda); + header.len = tjei_be_word((uint16_t)(6 + (sizeof(TJEFrameComponentSpec) * 3))); + header.num_components = 3; + + uint8_t tables[3] = { + 0x00, + 0x11, + 0x11, + }; + for (int i = 0; i < 3; ++i) { + TJEFrameComponentSpec cs; + // Must be equal to component_id from frame header above. + cs.component_id = (uint8_t)(i + 1); + cs.dc_ac = (uint8_t)tables[i]; + + header.component_spec[i] = cs; + } + header.first = 0; + header.last = 63; + header.ah_al = 0; + tjei_write(state, &header, sizeof(TJEScanHeader), 1); + + } + // Write compressed data. + + float du_y[64]; + float du_b[64]; + float du_r[64]; + + // Set diff to 0. + int pred_y = 0; + int pred_b = 0; + int pred_r = 0; + + // Bit stack + uint32_t bitbuffer = 0; + uint32_t location = 0; + + + for ( int y = 0; y < height; y += 8 ) { + for ( int x = 0; x < width; x += 8 ) { + // Block loop: ==== + for ( int off_y = 0; off_y < 8; ++off_y ) { + for ( int off_x = 0; off_x < 8; ++off_x ) { + int block_index = (off_y * 8 + off_x); + + int src_index = (((y + off_y) * width) + (x + off_x)) * src_num_components; + + int col = x + off_x; + int row = y + off_y; + + if(row >= height) { + src_index -= (width * (row - height + 1)) * src_num_components; + } + if(col >= width) { + src_index -= (col - width + 1) * src_num_components; + } + assert(src_index < width * height * src_num_components); + + uint8_t r = src_data[src_index + 0]; + uint8_t g = src_data[src_index + 1]; + uint8_t b = src_data[src_index + 2]; + + float luma = 0.299f * r + 0.587f * g + 0.114f * b - 128; + float cb = -0.1687f * r - 0.3313f * g + 0.5f * b; + float cr = 0.5f * r - 0.4187f * g - 0.0813f * b; + + du_y[block_index] = luma; + du_b[block_index] = cb; + du_r[block_index] = cr; + } + } + + tjei_encode_and_write_MCU(state, du_y, +#if TJE_USE_FAST_DCT + pqt.luma, +#else + state->qt_luma, +#endif + state->ehuffsize[TJEI_LUMA_DC], state->ehuffcode[TJEI_LUMA_DC], + state->ehuffsize[TJEI_LUMA_AC], state->ehuffcode[TJEI_LUMA_AC], + &pred_y, &bitbuffer, &location); + tjei_encode_and_write_MCU(state, du_b, +#if TJE_USE_FAST_DCT + pqt.chroma, +#else + state->qt_chroma, +#endif + state->ehuffsize[TJEI_CHROMA_DC], state->ehuffcode[TJEI_CHROMA_DC], + state->ehuffsize[TJEI_CHROMA_AC], state->ehuffcode[TJEI_CHROMA_AC], + &pred_b, &bitbuffer, &location); + tjei_encode_and_write_MCU(state, du_r, +#if TJE_USE_FAST_DCT + pqt.chroma, +#else + state->qt_chroma, +#endif + state->ehuffsize[TJEI_CHROMA_DC], state->ehuffcode[TJEI_CHROMA_DC], + state->ehuffsize[TJEI_CHROMA_AC], state->ehuffcode[TJEI_CHROMA_AC], + &pred_r, &bitbuffer, &location); + + + } + } + + // Finish the image. + { // Flush + if (location > 0 && location < 8) { + tjei_write_bits(state, &bitbuffer, &location, (uint16_t)(8 - location), 0); + } + } + uint16_t EOI = tjei_be_word(0xffd9); + tjei_write(state, &EOI, sizeof(uint16_t), 1); + + if (state->output_buffer_count) { + state->write_context.func(state->write_context.context, state->output_buffer, (int)state->output_buffer_count); + state->output_buffer_count = 0; + } + + return 1; +} + +int tje_encode_to_file(const char* dest_path, + const int width, + const int height, + const int num_components, + const unsigned char* src_data) +{ + int res = tje_encode_to_file_at_quality(dest_path, 3, width, height, num_components, src_data); + return res; +} + +static void tjei_stdlib_func(void* context, void* data, int size) +{ + FILE* fd = (FILE*)context; + fwrite(data, size, 1, fd); +} + +// Define public interface. +int tje_encode_to_file_at_quality(const char* dest_path, + const int quality, + const int width, + const int height, + const int num_components, + const unsigned char* src_data) +{ + FILE* fd = fopen(dest_path, "wb"); + if (!fd) { + tje_log("Could not open file for writing."); + return 0; + } + + int result = tje_encode_with_func(tjei_stdlib_func, fd, + quality, width, height, num_components, src_data); + + result |= 0 == fclose(fd); + + return result; +} + +int tje_encode_with_func(tje_write_func* func, + void* context, + const int quality, + const int width, + const int height, + const int num_components, + const unsigned char* src_data) +{ + if (quality < 1 || quality > 3) { + tje_log("[ERROR] -- Valid 'quality' values are 1 (lowest), 2, or 3 (highest)\n"); + return 0; + } + + TJEState state = { 0 }; + + uint8_t qt_factor = 1; + switch(quality) { + case 3: + for ( int i = 0; i < 64; ++i ) { + state.qt_luma[i] = 1; + state.qt_chroma[i] = 1; + } + break; + case 2: + qt_factor = 10; + // don't break. fall through. + case 1: + for ( int i = 0; i < 64; ++i ) { + state.qt_luma[i] = tjei_default_qt_luma_from_spec[i] / qt_factor; + if (state.qt_luma[i] == 0) { + state.qt_luma[i] = 1; + } + state.qt_chroma[i] = tjei_default_qt_chroma_from_paper[i] / qt_factor; + if (state.qt_chroma[i] == 0) { + state.qt_chroma[i] = 1; + } + } + break; + default: + assert(!"invalid code path"); + break; + } + + TJEWriteContext wc = { 0 }; + + wc.context = context; + wc.func = func; + + state.write_context = wc; + + + tjei_huff_expand(&state); + + int result = tjei_encode_main(&state, src_data, width, height, num_components); + + return result; +} +// ============================================================ +#endif // TJE_IMPLEMENTATION +// ============================================================ +// +#if defined(__GNUC__) || defined(__clang__) +#pragma GCC diagnostic pop +#endif + + +#ifdef __cplusplus +} // extern C +#endif +